Transcript
PROJECT: TYPE:
HLS Aisle Lighting System SURFACE MOUNT, 2-CIRCUIT
REMOTE POWER SUPPLY
APPLICATION
2.0 in
The HLS Aisle Lighting System delivers a targeted, narrow beam of illumination designed for aisles, walkways and corridors. Precision optics paired with a collimating slot, micro-baffles and/or shield create a confined pathway of light with no visible source reference. Tempo will assist in selecting the optical configuration for your application based on the ceiling height and aisle width to be illuminated. Surface mount luminaires paired with exclusive T-Bar ceiling mount clips allow straight or curved illumination patterns. The HLS Aisle Lighting System reduces or removes safety lighting products and wiring from the heavily trafficked floor environment and discretely illuminates pathways from the ceiling.
[51 mm]
2.6 in
[66 mm]
1.8 in
[47 mm] CONSTRUCTION
PERFORMANCE
• Extruded aluminum channel
• Light output varies by configuration
• Thermally optimized die-cast aluminum heat sink
LIGHT CHARACTERISTICS
• Plug and play connectors for simplified installation
• Available in 2200K, 2700K, 3000K, 3500K, 4000K correlated color temperature. Static colors (i.e. Red) also available, consult factory for additional color options.
• CSA damp location listed OPTICS / LENS / DIFFUSER • Precision optics pair with a collimating slot and micro-baffles configured for the mounting height and path width. • Side shield provides complete light block designed for auditorium applications
Shown with shield
• Typical CRI of 80+
WARRANTY Tempo provides a 5-year limited warranty. A 10-year warranty will apply when installed by a Tempo Certified Installer.
• Color variations confined to a 2-step MacAdam ellipse
POWER SYSTEM • Utilizes a remote, low voltage DC power supply (24V, 120V input) • Triac dimming (100-1%)
PERFORMANCE SUMMARY
All data nominal
Module Configuration
Watts/Module
E1 Circuit E
Aisle Light for nominal 15ft mounting height producing 4ftx9ft pattern via 12” narrow beam light module
10 W
E2 Circuit E
Aisle/Landing Light for nominal 20ft mounting height producing 3ftx5ft pattern via 12” narrow beam light module
10 W
E3 Circuit E
Aisle Light for nominal 30ft mounting height producing 4ftx10ft pattern via 12” narrow beam light module
10 W
E4 Circuit E
Aisle Light for nominal 40ft mounting height producing 4ftx15ft pattern via 12” narrow beam light module
10 W
SPEC_HLS-Aisle-2C-12_16_a
Page 1 of 6 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com
HLS Aisle Lighting System SURFACE MOUNT, 2-CIRCUIT
REMOTE POWER SUPPLY
ORDERING INFORMATION Example: HLS-S-6-E3RD-BK
HLS Surface Mount, 6ft, E3RDS [Aisle Light, 12” module for 30ft ceiling, 4ftx10ft pattern, Red, Side Light Shield], Black finish
HLS
S
6
PLATFORM
LIGHT MODULE CONFIGURATION
Series
Mounting
HLS
S
Surface Mount T-Bar
Fixture Length 6 6ft
Application
Light Color
Finish
E1
Aisle Light for nominal 15ft mounting height producing 4ftx9ft pattern via 12” narrow beam light module
BK
E2
Aisle/Landing Light for nominal 20ft mounting height producing 3ftx5ft pattern via 12” narrow beam light module
E3
Aisle Light for nominal 30ft mounting height producing 4ftx10ft pattern via 12” narrow beam light module
22 27 30 35 40 RD BL GR
E4
Aisle Light for nominal 40ft mounting height producing 4ftx15ft pattern via 12” narrow beam light module
2200K 2700K 3000K 3500K 4000K Red Blue Green
Black
Consult factory for additional colors
SYSTEM INTEGRATION ACCESSORIES POWER ENCLOSURE
Power Supplies (maximum of 5) in 48”x4”’x4” Enclosure
PWR-ENC-24/X-48
X = Quantity of 40W (24V, 120V input) Triac Dimming Power Supplies for Aisle Light modules (E) Lutron Hi-lume 1% 2-wire LED driver (120V forward phase) - LTEA2W
MOUNTING HARDWARE HLS-S-MTGCLIP
HLS Surface Mount T-Bar Clips (QTY 12). Minimum of 2 clips required for every 6ft section (luminaire or wireway).
HLS-S-MTGCLIP-SEISMIC
HLS Surface Mount T-Bar Clips (QTY 12) with Seismic Bracing Hanger.
HLS-S-PB-BK
HLS Surface Power Box, 2-Circuit, pre-wired with plug and play connector, includes cover plate, black finish
HLS-S-JBOX
HLS Surface J-Box for mounting on continuous t-grid spine Standard 2-gang j-box (by others) may be used when the power box is located within a tile
JUMPER FEED CABLE HLS-S-JFC2-FM24-12
Jumper feed cable, female and male connector, 12 inches
HLS-S-JFC2-FM24-24
Jumper feed cable, female and male connector, 24 inches
HLS-S-JFC2-FM24-36
Jumper feed cable, female and male connector, 36 inches
POWER FEED CABLE WIR-16-2BLU/2RED-PR
Plenum rated cable, 16 gauge, 4 wires– 2 Blue / 2 Red, 300ft per reel
HLS-S-PFC4-F24-180
Power Feed Cable with connector for HLS-S Surface 2-Circuit (used in lieu of HLS-S-PB Power Box), 15ft
HLS-S-PFC4-F24-360
Power Feed Cable with connector for HLS-S Surface 2-Circuit (used in lieu of HLS-S-PB Power Box), 30ft
SURGE SUPPRESSION DEVICE SSD-120
A Tempo furnished surge suppression device must be installed on each supplying branch circuit to comply with Tempo’s warranty terms
120V Branch Circuit
SPEC_HLS-Aisle-2C-12_16_a
Page 2 of 6 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com
HLS Aisle Lighting System SURFACE MOUNT, 2-CIRCUIT
REMOTE POWER SUPPLY
DIMENSIONAL INFORMATION - SURFACE MOUNTED SAMPLE CONFIGURATIONS E3RDS
HLS-S-6-E3RDS-BK
HLS Surface Mount, 2-Circuit, 6ft, E3RDS [Aisle light for nominal 30ft mounting height producing 4ft x 10ft pattern via 12” narrow beam light module, Red], Black Finish E13SN
HLS-S-6-E135-BK
HLS Surface Mount, 2-Circuit, 6ft, E13SN [Aisle light for nominal 15ft mounting height producing 4ft x 9ft pattern via 12” narrow beam light module, 3500K], Black Finish
SPEC_HLS-Aisle-2C-12_16_a
Page 3 of 6 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com
HLS Aisle Lighting System SURFACE MOUNT, 2-CIRCUIT
REMOTE POWER SUPPLY
DIMENSIONAL INFORMATION - SURFACE MOUNTED AISLE LIGHTING SYSTEM
with Side Shield
72.1 in
[1830 mm]
2.0 in
[51 mm]
2.6 in
1.8 in
[66 mm]
[47 mm]
11.3 in
[286 mm]
12.0 in
[305 mm]
SPEC_HLS-Aisle-2C-12_16_a
Page 4 of 6 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com
HLS Aisle Lighting System SURFACE MOUNT, 2-CIRCUIT
REMOTE POWER SUPPLY
DIMENSIONAL INFORMATION - MOUNTING HARDWARE 2-CIRCUIT SYSTEM HLS-S-JBOX
HLS-S-PB & HLS-S-JBOX ASSEMBLY J-BOX FROM HLS-S-JBOX
3.6 in
[91 mm]
1.0 in
in [253.6 mm] [91 mm] 1.0 in
[25 mm]
2.2 in 1.8 in [56 mm]
]
n
1.4 in
m]
1.0 in
[25 mm]
1.0 in
[36 mm]
1.4 in
2.2 in 1.8 in [56 mm]
[46 mm]
PUSH IN CONNECTORS FROM HLS-S-PB-XX. QTY-2 PER CIRCUIT FOR TOTAL QTY OF (4)
[36 mm]
KNOCKOUTS FOR T-BAR INSTALLATION QTY-4 @ 90°
3.5 in
[89 mm]
n
[89 mm]
m]
[46 mm]
[25 mm] KNOCKOUTS FOR T-BAR INSTALLATION QTY-4 @ 90°
n
m]
T-BAR BY OTHERS
3.5 in
45° 45°
3.6 in
[91 mm]
POWER BOX w/ CONNECTOR & LEADS FROM HLS-S-PB-XX. MAY BE INSTALLED ONTO HLS-S-JBOX AT INCREMENTS OF 90°.
3.6 in
[91 mm]
3.6 in
[91 mm]
#8-32 SCREWS FROM HLS-S-JBOX QTY-2
3.6 in
[91 mm]
POWER BOX COVER FROM HLS-S-PB-XX
HLS-S-PB 1.0 in
[25 mm]
6.0 in
[152 mm]
4.1 in
[103 mm]
2.0 in
[51 mm]
4.1 in
[103 mm]
SPEC_HLS-Aisle-2C-12_16_a
Page 5 of 6 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com
HLS Aisle Lighting System SURFACE MOUNT, 2-CIRCUIT
REMOTE POWER SUPPLY
MOUNTING HARDWARE HLS-S-MTGCLIP HLS-S-MTGCLIP HLS-S-MTGCLIP 2.0 in
[51 mm]
1.1 in
[28 mm]
0.3 in
[8 mm]
HLS-S-MTGCLIP-SEISMIC HLS-S-MTGCLIP-SEISMIC HLS-S-MTGCLIP-SEISMIC
2.0 in
2.3 in
[51 mm]
[58 mm]
1.1 in
1.1 in
[28 mm]
[28 mm]
HLS-S-MTGCLIP-EDGE HLS-S-MTGCLIP-EDGE
2.3 in
[58 mm]
1.1 in
1.1 in
[25 mm]
[28 mm]
0.5 in
0.3 in
[13 mm]
[8 mm]
0.4 in
[10 mm]
1.3 in
[33 mm]
1.3 in
0.4 in
[10 mm]
2.0 in
[51 mm]
1.1 in
1.3 in
[25 mm]
[33 mm
0.5 in
[13 mm]
0.9 in
2.0 in
2.5 in
[51 mm]
[64 mm]
[33 mm]
0.4 in
[10 mm]
1.3 in
[33 mm]
0.4 in
[10 mm]
1.3 in
[33 mm]
Tempo products and technologies are protected under one or more US and International patents. Tempo reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program. Please consult www.tempollc.com for the most up-to-date specifications and technical data.
SPEC_HLS-Aisle-2C-12_16_a
Page 6 of 6 1961 McGaw Ave. • Irvine, CA 92614 • (949) 442-1601 • tempollc.com
[23 mm]
2.5 in
[64 mm]
0.9 in
[23 mm
