Transcript
BAS I C DOLLY KI T The Basic Dolly Kit includes one "T"-Bar Dolly, 13 Feet (4m) of Track, two 13 foot Track Pads, one Dozen Track Shims, one Ratchet Tie-down, one Wheel Wrench Tool, one pair of Track Bumpers and one Custom Soft Case. No tools are required to assemble. Dolly and Track are made of hardened structural grade anodized aircraft aluminum and fold to a compact 30 in.(76cm) in length. Net Weight: 10 lbs. (4.5kg)
EXTRA TRACK KI T The Extra Track Kit is the complete track accessory for longer dolly shots. The Kit includes two 13 foot (4m) Straight Track Sections, four 13 foot Foam Track Pads, 24 Shims, two Track Connector Kits, and one Custom Made Soft Case. All tracks and foam pads fold to a compact 30 in. (76cm) in length. Curved Track may be substituted as an upgrade. Net Weight: 10 lbs. (4.5kg)
STRAI GHT TRACK Additional Straight Track Sections are 13 feet (4m) in length and fold to 30 in. (76cm). Extra Sections come with a Tube Bag for protection and a Track Connector Kit which joins track sections together. Net Weight: 4.0 lbs. (1.8kg)
CURVED TRACK Of special note is the Curved Track from MICRODOLLY. Each 15 foot (4.5m) section turns 90 degrees on an 8 foot (2.5m) radius. Four sections make a full circle. This amazing product folds to a compact 30 inches (76cm), will fit in the standard MICRODOLLY Soft Case and is completely compatible with the MICRODOLLY "T"-Bar Dolly and Straight Track. Net Weight: 5.0 lbs. (2.3kg)
NON S KI D PADS As the name suggests, these super light weight pads protect the surface and will not allow the Dolly Track to skid or move even when wet. Made from a fiberglass mesh dipped in neoprene and coated with a patented sticky material these pads are temperature and water resistant. Each pair of pads is 15 feet long and may be used Net Weight: 1.0 lbs. (450
with a patented sticky material these pads are temperature and water resistant. Each pair of pads is 15 feet long and may be used with Straight or Curved Dolly Track. Net Weight: 1.0 lbs. (450g)
DOLLY P USH BAR This handy accessory attaches to the "T"-Bar Camera Dolly and allows the dolly to be pushed by someone other than the camera operator. Crafted from sturdy, structural grade aluminum, with a carbon steel universal joint, the Dolly Push Bar is 50 in. (128cm) in length and closes to fit snugly into the Basic Kit Bag. Net Weight: 1.0 lbs. (450g)
HI -HAT CAMERA MOUNT Made of machined structural grade aluminum, this lightweight yet very sturdy Camera Mount positions the camera just inches above the dolly. Attaches in seconds. Will accept 100mm and 120mm cups for mounting of ball leveled heads. Imbedded "O"-ring prevents slippage. Recommended for loads under 25 pounds. Platform size: 4x6 inches (10 x 15cm). Net Weight: 11 oz. (300g)
100 mm HI -HAT CUP Designed to attach in seconds, this cup allows 100mm ball leveling pan/tilt heads to be mounted on the Hi-Hat, Baby Tripod, Jib Tripod, or Jib Camera Plate. Machined from sturdy structural grade aluminum, heavy black anodized for durability. Net Weight: 7 oz. (200g)
DOLLY P LATFORM Made of 7 ply Finnish Birch, this platform attaches firmly to the dolly in seconds. Sealed for weather protection, it is perfect for carrying weights, batteries or field recorders. Fits neatly inside a MICRODOLLY Kit Bag. Platform size: 9 x 24 inches (23 x 62cm). Net Weight: 1.5 lbs. (680g)
TRI P OD TI EDOWN KI T Machined from durable high impact nylon, this set of three connectors snaps into place to quickly attach a tripod to the Dolly. This allows the tripod to be easily adjusted while still mounted on the Dolly. Will fit most professional tripods. Net Weight: 5 oz. (140g)
CABLE PULLE R Perhaps you have a video monitor cable, power cord or audio line trailing along behind you as you move. This light weight arm clamps to the Dolly and extends beyond the track to hold the cable away from wheels. Spring mounted to prevent damage if accidentally stepped on, it folds out of the way when not in use and can be left permanently mounted to the Dolly. Net Weight: 5 oz. (140g)
STUDI O WHEELS The Dolly Studio Wheels snap into position to allow the Dolly to be used off the Dolly Track on a smooth surface. The regular dolly track wheels need not be removed. The Studio Wheels swivel 360 degrees independently to allow the Dolly to move in any direction. Studio Wheels can be mounted or detached in just seconds. Net Weight: 3.0 lbs. (1.35kg)
Requests? Prices? Delivery?
MICRODOLLY © is a registered trademark of MICRODOLLY, INC. PATENTED
