Transcript
Digital Terrestrial Receiver Small, Fast and Reliable
eM1150
Homecast eM1150 High quality Standard Definition Digital Terrestrial Receiver
» SPDIF Optical Digital Out » Digital Tuner with loop through » Fully featured Onscreen Display menu » MPEG-2 Digital & Fully DVB Complaint » Built in Modulator supporting PAL signals » Variable aspect ratios: 4:3, 16:9 and letterbox » Capacity to store 2000 Free to air channels » Teletext and subtitles supported » EPG (Electronic Program Guide) for onscreen channel information » Favorite channel list www.homecast-australia.com
TERRESTRIAL
Digital Video Broadcasting
eM1150 Back Panel Design
Specifications RF Input Frequency 160 ~ 860 MHz Loop Through 51 ~ 860 MHz Bandwidth 7MHz Connector IEC-Female Demodulator IEC-Female FFT mode 2K,8K Constellation QPSK,16QAM,64QAM Guard Interval 1/4,1/8,1/16,1/32 Inner Coding Rate 1/2,2/3,3/4,5/6,7/8 Video Output Formats MP@ML Aspect Ratio 4:3 , 16:9 Picture Resolution 720 ×576 , 720 ×480 Output System NTSC/PAL Connector RCA/SCART Composite out via RCA and Scart RGB out via Scart Supports Teletext via OSD and Vertical block insertion Supports EPG Full channel edit features 256 colour menus General Data Operating Temperature: 5 ~ 40 Storage Temperature: 4 ~ 65
RF Modulator System PAL-I/B/D/G/K(NTSC/PAL-M) Channel Ch.21~69 Return Loss 3 dB max.75 Ohms Audio Mono Connector IEC (Female-type) Bypass Bandwidth 45~862MHz Rs232 port for software upgrade Power Supply Input Voltage: 90 ~ 240 VAC 50 ~ 60 Hz Consumption: (Max.) 25 W Dimensions W ×D ×H (mm) 280 x 220 x 60 Weight (Kg) 2.1Kg Audio Output Formats MPEG (Layer1&2) Sample Rate 32/44.1/48 KHz Mode Mono/Stereo/Dual Connector RCA/SCART TOSLINK optical output Accessories 1xRemote control and batteries 1xA/V RCA Cable 1xUser’s Manual
www.homecast-australia.com