Transcript
Homesurf Tablet 8_QSG_EN.fm
Page 1
Thursday, October 7, 2010
2:58 PM
B. Connect and charge your Homesurf Tablet
fro
1 Setting up your Homesurf Tablet
d de oa
For a full explanation of all the features and operating instructions, please refer to the User’s Guide.
nl
ow D
Homesurf Tablet 8 – Quick Start Guide
m
A. Attach your Homesurf Tablet to the docking station
w w
The supplied docking station is also charging station and audio amplifier for your Homesurf Tablet. Simply place your Homesurf Tablet on the docking station as shown in the illustration.
e
.b re or
nb de an .v
w
OR
1. Plug one end of the AC power adaptor to the power jack on your Homesurf Tablet or the docking station. 2. Plug the other end into a power outlet. 3. The charge LED turns red to indicate charging. Note: • Charge for at least 6 hours. • It is normal for the device to build up heat while charging or after using for an extended period of time.
1
Homesurf Tablet 8_QSG_EN.fm
Page 2
Thursday, October 7, 2010
2:58 PM
ow D
B. Insert memory card
D. Switching on your Homesurf Tablet
nl
Press and hold P and release when the blue power LED turn ON (it takes about 1 minute for the Homesurf Tablet to boot up).
d de oa
fro
E. Switching off the Homesurf Tablet
m
Press and hold P and release when the screen shuts down.
w
w
2 Connecting Homesurf Tablet to a PC w
O
e
.b re or
C. Remove memory card
nb de an .v
1. Insert the memory card into the card slot in the direction as indicated above until it clicks into place.
1. Plug one end of the USB cable to the USB port on your Homesurf Tablet and plug the other end to your PC. USB connected is displayed on your Homesurf Tablet and appears on the Notifications panel. and then tap Notifications to open the notifications 2. Press panel.
3. In the notifications panel, tap USB connected and then tap Mount. Remove memory card When the Homesurf Tablet is off 1. Push in the memory card. The memory card will pop out from its slot. When the Homesurf Tablet is on 1. Press and tap Settings > SD card & internal storage > Unmount SD card. 2. Push in the memory card. The memory card will pop out from its slot.
O
2
Homesurf Tablet 8_QSG_EN.fm
Page 3
Thursday, October 7, 2010
2:58 PM
-+
• Press • Press
H
• Press to return to the home screen. • Press and hold for 1 second to switch between tasks.
O
• Press to open the options list. • Press and hold (about 10 seconds) to calibrate the touch screen. • Press and hold (about 3 seconds) to launch onscreen keyboard. Press again to hide the keyboard.
b
• Press to return to previous screen. • Press to hide the onscreen keyboard. • Press to exit a dialog box, options menu or notifications panel. • Press to cancel an operation. • In browser mode, press and hold to access Favourites and browse history pages.
/
d de oa
m
fro
w
w
e
.b re or
nb de an .v
w
O
1. From the homescreen, press . 2. Tap Settings > Wireless controls. 3. Tap Wi-Fi to turn on wireless connection. ! appears in the Wi-Fi checkbox. 4. Tap Wi-Fi settings. Your Homesurf Tablet will start to scan for the networks within range and display a list of available Wi-Fi networks. 5. Tap the Wi-Fi network that you want your Homesurf Tablet to be connected with. If the network is not secured with a password, your Homesurf Tablet will start to establish a link with it. 6. If is a secured network, you will be prompted to select the security option (for networks secured with WEP) and enter the wireless password. 7. Tap on the password field to launch the onscreen keyboard. Enter the password and tap Connect. Your Homesurf Tablet will start to establish a link to the network. Once a connection established, “Connected” will appear below the name of the Wi-Fi network. to return to the home screen. 8. Press will appear on the status bar of your home screen.
+ to increase volume. - to reduce volume. nl
3 Making a Wireless Connection
4 Basic operations of the Homesurf Tablet ow D
The internal memory or the MicroSD card memory on your Homesurf Tablet will be mounted as a removable disk on your PC, by which you can read and write files between your Homesurf Tablet and the PC. Note When a MicroSD card is inserted, the PC will only read the MicroSD card content.
H
3
Homesurf Tablet 8_QSG_EN.fm
Page 4
Thursday, October 7, 2010
2:58 PM
Function
Operations
d de oa
Action
nl
ow D
5 Operating the touchscreen of the Homesurf Tablet using Stylus Pen or Finger • Select onscreen items such as applications and settings icons. • Select onscreen buttons. • Type using the onscreen keyboard.
Gently tap an item on the screen to select the item that you wish to activate.
Tap and hold
Open the available options for an item, for example, tap and hold a contact or a link on a web page. (Think of this as using the right-click button on a mouse).
Tap an item on the screen and hold in place for 2~3 seconds.
Drag
Move items on the screen or shift the view on the screen.
Apply light pressure against an item on the screen then, without raising your finger or the stylus, move it across the screen until you have reached the target position.
Slide
Quickly move vertically or horizontally across the screen.
Apply light pressure on the screen then, without raising your finger, swipe vertically or horizontally across the screen until you have reached the target screen position.
Flick
Quickly browse a list of items in a vertical direction.
Flick is similar to slide, except that flick involves swiping the screen in lighter and quicker strokes.
m
fro
Tap
w
w e
.b re or
nb de an .v
w
6 General Information
If you need help...... The Binatone Help Line is available from 9.00am ~ 5.00 pm, Mondays to Fridays, please call: 0845 345 9677 for UK, +491805938802 for Europe
Australia customer service number 1300 768 112 or email to
[email protected] India customer service number +91 7503011385 or email to
[email protected]
4
