Transcript
SET UP – BEFORE USE
INSTRUCTION MANUAL OVALE™ SMART CHARGING STATION (2.1 Amp)
Charge Button (Lights up when charging)
USB Charge Ports
Model: OVG690 FEATURES DC Jack
• • • • • •
Charges up to 4 USB devices at one time 2.1 Amp charge capacity Smart Charge automatically shuts off power to connected devices when all are fully charged Saves standby power Lighted Charge Button AC Powered
AC Power Adapter (Plug into AC Electrical Socket) AC Power Adapter (Plug into DC Jack)
1. Insert the AC Power Adapter into the DC Jack of the Ovale™.
IMPORTANT SAFETY NOTES
2. Plug the other end of the AC Power Adapter into an AC Electrical Socket.
WARNING--READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS PRODUCT.
3. Connect your devices to their respective USB Charging Cables.
The user of electrical products may create hazards that include, but are not limited to injury, fire, electrical shock. These instructions are intended to provide you with important information. When using electrical products, basic precautions should always be followed to reduce risk of hazards. 1. WARNING: Read all instructions before using this product. 2. WARNING: To reduce the risk of electric shock, unplug the Ovale™ from the AC Electrical Socket before attempting any cleaning. 3. WARNING: DO NOT allow children to handle or operate this product. 4. WARNING: Do NOT attempt to power or operate this product if the AC Power Adapter, cords or any part of the Ovale™ Smart Charging Station is damaged or corroded. 5. WARNING: DO NOT store, power or operate in close proximity to combustible or flammable materials. 6. WARNING: Store at room temperature or cool temperatures. DO NOT store in a room with very hot temperatures, or under direct sunlight. 7. WARNING: DO NOT immerse in water or any liquid. 8. WARNING: DO NOT attempt to open any fixed parts or disassemble this product as it may expose you to dangerous electric shock.
4. Connect the USB plug of these cables into one of the available USB ports on the Ovale™. 5. Press the Charge Button located on the top of the Ovale™. The Charge Button will light up indicating that power is flowing to the connected devices. 6. Once all connected devices are fully charged, the Charge Button will flash two times, and the Ovale™ and the light of the Charge Button will automatically switch off. 7. Press the Charge Button again to reactivate charging when new devices have been plugged into the Ovale™, to repeat the charging process for those newly connected devices. IMPORTANT: Pressing the Charge Button only activates charging. Pressing the Charge Button during charging will not turn Off charging. You must disconnect the device from the Ovale ™ in order to stop charging of any device that is connected to the Ovale™. IMPORTANT: Ovale™ will stay powered until all connected devices are fully charged. If you connect an additional device during charging, Ovale™ will restart the charge cycle to ensure that the new device/ devices are fully charged before it shuts off power. If you unplug all USB devices from the Ovale™, it will automatically shut off power after approximately 2 minutes of being idle. IMPORTANT: When the Ovale™ Smart Charging Station is not in use, completed charging or disconnected from your USB devices, it uses no power – it does not draw unnecessary standby power from your AC Electrical Socket. IMPORTANT: Different devices draw different amounts of power. Devices such as tablets usually require much more power and longer charging times to fully charge their batteries. Ovale™ can charge up to FOUR smart mobile devices simultaneously. It is recommended to only charge ONE tablet at one time.
