Transcript
How do I switch on my SuperTooth Disco Twin? Press and hold the On / Off Button for 2 seconds. Speaker says HELLO and all the buttons switch on and off automatically.
How do I switch off my SuperTooth Disco Twin ? Press and hold the On / Off Button for 3 seconds. Speaker says GOODBYE and it switches off. Note: If you switches off the MASTER LEFT, both Disco Twin switch off. If you switch off the right speaker, only this one will switch off.
Can I pair any of the 2 SuperTooth Disco Twin ? No, you must only pair the MASTER-LEFT (see the mark behind the product).
Is it necessary to the 2 SuperTooth Disco Twin together? No, they are already paired together.
How do I pair my SuperTooth Disco Twin MASTER with my Bluetooth phone / device ? Important: Make sure that your phone / device supports Bluetooth A2DP (Advanced Audio Distribution Profile) before proceeding.
1. The SUPERTOOTH DISCO TWIN MASTER must be turned OFF. Press and hold the On / Off Button for 6 seconds until the Play / Pause Indicator Button blinks red fast. The SUPERTOOTH DISCO TWIN MASTER is ready to be paired. 2. While the SUPERTOOTH DISCO TWIN MASTER is in pairing mode, access the Bluetooth menu of your phone/iPad/laptop. Turn on its Bluetooth function then execute a Bluetooth search to find the SUPERTOOTH DISCO TWIN. 3. When your phone displays the list of Bluetooth devices, select ST DISCO TWIN. 4. If your phone asks for a password / pin code, enter 0000 and press OK. 5. The SUPERTOOTH DISCO TWIN MASTER beeps twice. It is ready to use with your device.
When the DISCO TWIN MASTER is connected with your phone, switch on the other speaker. Both DISCO TWIN connects together, they are ready to be used with your device.
In standby mode, I can’t see any light on the buttons of my SuperTooth Disco TWIN, is it normal ? Yes it is. In order to optimise battery life and not to be distracted by the light of the button, if you are not playing music, the SuperTooth Disco TWIN goes to standby mode automatically after a few seconds and the Play/Pause button switches off.
In standby mode, how can I know if my SuperTooth Disco TWIN is switched on or off ? If you are not playing music, the SuperTooth Disco TWIN goes to standby mode automatically after a few seconds and Play/Pause button switches off. To check it is turned on, press any button. Play/Pause button switches on and off instantaneously.
Can I use any of the 2 SuperTooth Disco Twin ? In Bluetooth mode no, you must only pair the MASTER-LEFT (see the mark behind the product). Using stereo line input, you can use any of the 2 SuperTooth Disco TWIN.
How to reset the SuperTooth Disco TWIN? The Disco Twins have to be reset to Factory settings. 1. Delete pairings on the 2 disco Twins: - from OFF, Long press (5s) the ON/OFF button on the two Disco Twins to go in pairing mode (Play/Pause Button flashes red quickly). - long press (5s) the PLAY/PAUSE buttons on the two Disco Twin (until the beep), to erase the pairings. 2. Then we need to re-pair the two Disco Twins to delete the MASTER/SLAVE setting. - Switch off both Twin. Select the Master. From OFF, long press ON/OFF Button until Play/Pause Button flashes red quickly (Twin is in pairing mode). Release the Button. Select the Slave. From OFF, long press ON/OFF Button until Play/Pause Button flashes red quickly (Twin is in pairing mode). Release the Button. On the Master, short press the Play/Pause Button. 1 second later, short press the Play/Pause Button on the Slave. Wait until they beep and connect together. Switch off the 2 Twins. Both devices are now reset to factory settings. To test: 3. Pair your phone to the Disco Twin marked MASTER/LEFT: Pairing the master Disco Twin with your phone: Switch off the slave Disco Twin. First please make sure to switch off (or disable its Bluetooth) any devices already paired with the Disco Twin. Put the master Disco Twin (printed at the back of the product) in pairing mode: 1. The MASTER SUPERTOOTH DISCO TWIN must be turned OFF.
Press and hold the On / Off Button for 6 seconds until the Play / Pause Button blinks red fast. The MASTER SUPERTOOTH DISCO TWIN is ready to be paired. 2. While the MASTER SUPERTOOTH DISCO TWIN is in pairing mode, access the Bluetooth menu of your phone/iPad/laptop. Turn on its Bluetooth function then execute a Bluetooth search to find the SUPERTOOTH DISCO TWIN. 3. When your phone displays the list of Bluetooth devices, select ST DISCO TWIN. 4. If your phone asks for a password / pin code, enter 0000 and press OK. 5. The MASTER SUPERTOOTH DISCO TWIN beeps. When the MASTER DISCO TWIN is connected with your phone, switch on the SLAVE DISCO TWIN. Both DISCO TWIN will connect together. DISCO TWIN is ready for using with your phone.
