Preview only show first 10 pages with watermark. For full document please download

How To Calibrate A Dell Printer For A Better Printing?

   EMBED

Share

Transcript

How to Calibrate a Dell Printer for a Better Printing? Have you issues with your Dell printer as your printing documents are not consistent with what you see on the computer screen? It is obvious to concern as in many cases you need your printing documents exactly as same as it is seen on the screen. You may not wish even a little difference with your printing documents, especially when you are printing color images or designing a logo etc. In such cases, a Quick Dell printer calibration may set your printer straight again. So here Dell Printer Technical Support presents you with rather a comprehensive solution by which you can readily accomplish this task. Just you need to go through the entire steps.  Turn your printer off, remove all the USB connected devices, wait for 10 seconds and then turn it on again. Connect it to the system. Sometimes, it is might be useful in solving small printing errors.  Put in a sheet of paper into the feed tray. Go to the Dell Printer’s main control panel and press the directional arrows, press it until you see “Maintenance” tab on the LCD screen. Press “Select” button to select this tab.  Continue pressing the Directional arrow until you see “Align Cartridges”, let it complete by pressing the “Select” button. Doing this, the computer will print a test page. Check whether it is printing with true color alignment or not. These are the hard and fast method our experts have explained you. It is comparatively easy but it might be difficult in case of some other additional issue you face with your Dell Printer. Therefore even after following these steps, if you are still unable to fix this issue then it is better to get in touch with the experts. So feel free to contact our experts via toll-free Dell Printer Technical Support Australia (+61-283173391). They will not only help you with this particular issue but also provide you with a well-described solution in some other similar issue. Source