Preview only show first 10 pages with watermark. For full document please download

How To Clean The Shure Sm58 Grille

   EMBED

Share

Transcript

How to clean the Shure SM58 Grille How to clean the Shure SM58 Grille This guide shows you how to clean your microphone grille. Written By: nat coll © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5 How to clean the Shure SM58 Grille INTRODUCTION The grille is the part of the microphone that you speak into. Keeping it clean ensures that your sound quality is at its best. TOOLS: Cup (1) Soap (1) Water (1) © iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5 How to clean the Shure SM58 Grille Step 1 — Grille  Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove. Step 2  Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps. © iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5 How to clean the Shure SM58 Grille Step 3 — How to clean the Shure SM58 Grille  Put two drops of dish soap into a cup.  Add water to cup until half full.  Place the grille in the solution of soap and water.  Let the grille soak for half an hour. Step 4 © iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5 How to clean the Shure SM58 Grille Step 5  Remove the grille from the cup and rinse with cold water.  Allow the grille to air dry.  Make sure the grille and the foam inside it are completely dry before placing it back on the microphone. This document was last generated on 2017-06-19 09:55:14 AM. © iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5