Transcript
1. Content of the box
2. View of the product
Device functionnalities : ON/OFF button Press 3 secondes
1. Geolocalise your children, relatives, in real time and continuously. 2. Smartski links your smartphone to your trackers. 3. Relief map including slopes, ski lifts, first-aid posts and restaurants. 4. Mark way points. 5. App available on Android and Iphone
LED USB : Lift up the USB
cap to connect the cable.
Load Smartski on Playstore or contact us for i-phone 1. Connect the tracker to the wall charger with the USB cable 2. The battery is loaded within 2 hours. Unplug when fully loaded. 3. Make sure the battery is fully loaded before usage (click onto the skier on the app).
3. Working mode
4. How to use Smartski
Switch on : Press on the button during 3 secs. All the leds blinkle a few seconds. Same procedure to switch off the tracker. When powered on, there are 2 different states : - state n°1 sending data, - state n°2 in stand by mode after 3 minutes still, until next movement. Matrix table of the leds :
Load Smartski app on Playstore or install it on your i-phone, then enter the given customer id in the field 'identification'. 1.- Activate your GPS on your smartphone. 2. Connect your smartphone on internet, connection to mobile data (3G, H+/H/E visible near the network intensity) and activate roaming data. 3. Click on Smartski icon and let the blue character (you) appear on the map. 4. The tracker/the skier appears a few seconds later.
Tracker status Low Battery Charging Charged Stand by mode GPS Calculating Tracker GSM Network search Working
Red LED Blinking On Off Off Off Off Off
Blue LED NA NA NA Off On NA Flash every 20 S
Orange LED NA NA NA off NA on Flash every 20 S
Discovering the app 5. Menus : click on the menu icon To come back to the main menu, Click on the menu icon. Click on Orientation Carte: -orientation nord, north at the top of the map -orientation route, the blue icon (you) gets oriented 'going up' to the top of the screen as soon as you walk 3 or 4 steps. The map slides down when moving. -orientation manuelle, manual orientation with the touch screen ●
Click on Points d'intérêt : You can register a way point, only where you stand. To return to menu icon, click on Point d’intérêt: -Saisie, allows you to name and register a way point. A snippet appears : type the name of the point by clicking on the blinking cursor and using the keyboard. -Masqués : by default the way points are masked. -Visibles : Way points appear on the map. To mask them, click on 'Masqués'. When clicking on a way point, a snippet appears, showing the name, the distance from you and the recording time&date. -To cancel a way point, click on this snippet.
9. Vision : Smartski allows you to see your children and friends. When clicking on a skier, you get to the name, distance from you, speed, remaining battery autonomy and the last connection transmitted.
●
●
When clicking on a character, the map centers on this character. 10. Centering : When sliding off the map, the map recenters automatically. When you want to freeze the map to recenter after sliding off, first click once anywhere on the screen except on a character then slide the map off on the area you want to investigate. Recentering is then frozen and you can move the map anywhere. To center back on you, click on your character to activate the centering again (if you see your character). If you don't see your character on the screen, first dezoom to visualize your character and click on your character and then zoom again.
7. Zoom button: You can zoom and dezoom with the +/- button on the right down corner. 8. Changing name and colour of the skier : Click on the skier : a text snippet opens, click on the pen to customize the name and colour of the skier.
11. 'Changer utilisateur' : change user : allows you to enter a new customer id code when you get a new connection contract.
5. Usage information We recommend to start the app under a good network coverage area, or at home in wifi mode, and not to quit the app during usage. When the app is running, you can turn your smartphone in stand by mode and the positionning keeps going. When you wake up your smartphone, you will be located where you are. Smartski app doesn't prevent you from receiving phone calls. Phone calls are first priority. If you are standing in an area poorly covered with 3G/4G, phone calls may disturb temporarily the Smartski app data transmission. Normal usage comes back when call ends. When the tracker is still during 3 min, it becomes unactive in term of data transmission, keeping the last position on the map (even though turning off/on the smartphone). When visualizing the app, the tracker will send data every 10 seconds. The battery autonomy of the tracker is 10hrs. When the smartphone is in stand by mode, the tracker sends data every minute and the autonomy of the tracker is 18hrs.
Considering the time to visualize the smartphone screen as variable, the average autonomy of the tracker is about one day. When clicking on the skier, you can see the remaining battery autonomy. Recommendation about battery life time : It is advised to run a complete load/unload cycle at the first use. We recommend to load the tracker as soon as the red light is blinking. Storage of the battery between running seasons : we recommend to store the tracker in a dry and cool place and to keep it loaded to avoid any storage in unloaded mode which could prevent to battery to load again. Here after : characters code appearing on the app according the situation.
This device is compliant to the Directive R&TTE (99/5/EC), the Directive EMC (2004/108/EC) and the Directive «Low voltage» (DBT) (2006/95/CE) delivered by the European Community Commission.
