Transcript
How to Use Your Cobra 29 LX CHR LE Contents Features .........................................................................................................1 The CB Story .................................................................................................A1 FCC Regulations, FCC Warnings & Included Accessories Controls & Indicators................................................................................A2 Our Thanks to You .....................................................................................A3 Customer Support Installation Location & Mounting/Connection ..................................................2 Antennas CB Antenna & Marine Installation ...................................................6 Ignition Noise Interference....................................................................7 Operating Your 29 LX CHR LE Turning On Your CB.............................................................................. 8 Setting Channel Selector .................................................................... 9 Calibrate For SWR (Standing Wave Ratio) .................................... 10 To Receive ................................................................................................ 12 Selecting a Channel .............................................................................. 13 S-Meter ...................................................................................................... 13 To Transmit .............................................................................................. 14 Setting Dynamike® ............................................................................... 15 Menu Mode ............................................................................................. 16 Setting the Clock ................................................................................... 17 Setting the Alarm .................................................................................. 17 Setting the Count Down Timer ........................................................ 18 Key Tones Mode .................................................................................... 18 Radio Check Mode ................................................................................ 19 Setting Display Color Mode............................................................... 20 Setting Brightness Mode .................................................................... 21 Setting Contrast Mode ........................................................................ 21 Weather Information............................................................................ 22 Weather Channels ................................................................................. 23 Weather Alert Mode ............................................................................. 24 Setting Weather Alert Scan................................................................ 24 Setting Weather Auto Scan ............................................................... 24 Software version/Factory Settings .................................................. 25 NB-ANL/Off (Noise Blanker/Automatic.......................................... 26 Noise Limiter Switch) RF Gain Control ...................................................................................... 26 Program Memory Channels............................................................... 27 Scan/Memory Scan ............................................................................... 27 Scan CB Channels .................................................................................. 28 Scan Memory Channels ...................................................................... 28 Dimmer Control ..................................................................................... 28 Setting Squelch ...................................................................................... 29 S/RF Meter ................................................................................................ 30 External Speaker .................................................................................... 31 PA (Public Address)............................................................................... 32 Home And Office Set-Up .................................................................... 34 Temporary Mobile Set-Up .................................................................. 35 How Your CB Can Serve You ................................................................. 36 A Few Rules You Should Know ........................................................36 Channel 9 Emergency Messages .....................................................36 CB 10 Codes.............................................................................................38 Frequency Ranges .....................................................................................40 29 LX CHR LE Specifications ..................................................................41 Warranty Information ..............................................................................42 Optional Accessories ................................................................................ 43 Optional Accessories Order Info .........................................................44 If You Need Service/Trademark Info ................................Back Cover
Features of This Product • Selectable 4-Color LCD Display • 10 Weather Channels • Weather Scan • Emergency Weather Alert • 40 CB Radio Channels • 40 Channel Scan • Memory Channels • Channel Frequency Read-Out • Radio Check Diagnostic • Clock/Timer/Alarm • Heavy-Duty Dynamic Microphone • Full 4 Watts AM RF Power Output • SWR Calibration Meter • Instant Channel 19 and 9 • Front Panel 4-Pin Microphone Connector • Switchable Automatic Noise Limiter & Noise Blanker • Adjustable Dynamike Boost • Tactile Controls • 9 Ft Mic Cord • Programmable Dimmer Control • RF Gain For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd. Wilmington, NC 28411 (800) 507-0482 / (910) 686-4281
For Sales Information Please Contact RoadTrucker Inc 1 (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281 29LX_CHR_MANL.indd 1
5/11/11 3:32 PM
Installation
Installation
Location
Location Plan location of transceiver and microphone bracket before starting the installation. Select a location that is convenient for operation, yet does not interfere with the driver or passenger. The transceiver is usually mounted to the underside of the dash with the microphone bracket beside it.
Mounting and Connection
Mounting and Connection 1
Note The transceiver is held in the universal mounting bracket by two thumbscrews which allow for adjustment at a convenient angle.
Hold the radio with the mounting bracket in the exact desired location. If there is no interference, remove the bracket and use it as a template to mark the location for the mounting screws. 3
Connect the antenna cable plug to the receptacle marked “ANT” on the back of the unit.
The bracket includes two selftapping screws and star washers. The mounting must be mechanically strong, conveniently located.
2
Drill the holes and secure the bracket. continued
2 29LX_CHR_MANL.indd 2-3
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
3 5/11/11 3:32 PM
Installation
Installation
Note Before installing the CB radio, visually check the vehicle’s battery connection to determine which terminal, positive or negative, is grounded (positive is the larger of the two) to the engine block (or chassis). A negatively grounded vehicle has its negative lead grounded to the chassis. Note
6
Plug power cable into back of unit marked “Power”. Be sure to observe polarity markings.
7
Mount the microphone bracket on either side of the unit (driver’s left) using two screws supplied. Bracket should be placed under the dash so microphone is readily accessible.
Connecting to an accessory fuse prevents the unit from being left on accidentally, and also permits operating the unit without running the engine. 4
Note In positive ground vehicles the red wire goes to the chassis and the black wire is connected to the ignition switch.
5
Note When connected to an accessory fuse, unit will self test the emergency weather alert automatically when ignition is turned on. Turns itself on & off.
Note If microphone is not connected, audio will not be heard at speaker.
Connect the black lead to the negative side of the vehicle. This is usually the chassis. Any convenient location with a good electrical contact (remove paint) may be used.
8
4 29LX_CHR_MANL.indd 4-5
In a negative grounded vehicle, connect the red lead of the DC power cord to an accessory 12 volt fuse.
Attach the 4-pin microphone cable to receptacle on front of unit and install unit in bracket securely.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
5 5/11/11 3:32 PM
Antennas
Ignition Noise Interference
CB Antenna
CB Antenna
Since the maximum allowable power output of the transmitter is limited by the FCC, the antenna is critical in affecting transmission distance. Only a properly matched antenna system will allow maxiNote mum power output. Cobra loaded type antenna For optimum performance in models are highly recommended for most instalpassenger cars the ideal anten- lations. For models with Weather Feature (WX), na location is on the center of a Dual Band (Center Load/Base Load) antenna the roof. Second choice is on the is recommended. Consult your Cobra dealer for center of the trunk. further details, or call 773.889.3087 and speak to a Cobra representative. Note Because many newer trucks feature fiberglass door skins, the outside mirror must be grounded to the chassis via a ground strap, if the antenna is mounted on the mirror bracket.
Use of a mobile receiver at low signal levels is normally limited by the presence of electrical noise. The primary source of noise in automobiles is from the alternator and ignition system. Typically, when signal level is adequate, the background noise does not present a serious problem. Also, when extremely low level signals are being received, the transceiver may be operated with the vehicle’s engine turned off. The unit requires very little current and therefore will not significantly discharge the vehicle’s battery. Even though the Cobra 29 LX CHR LE has an automatic noise limiter, in some installations ignition interference may be high enough to make good communications impossible. Many possibilities exist and variations between vehicles require different solutions. Consult your Cobra dealer or a 2-way radio technician for help in locating the source of a severe noise.
Note 3-way Combination Antennas are also available which allow operation of all three bands (AM-FM & CB), using a single antenna. However, this type of antenna usually results in less than normal transmit and receive range when compared to a standard-type “Single Band” CB antenna. Call 773889-3087 for further information.
1
Marine Installation The transceiver will not operate at maximum efficiency in a boat without a ground plate, (unless it has a steel hull). Before attempting installation , consult your dealer for information regarding an adequate grounding system and prevention of electrolysis between fittings in the hull and water.
6 29LX_CHR_MANL.indd 6-7
A standard antenna connector is provided on the transceiver for easy connection.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
7 5/11/11 3:32 PM
Operation
Operation
Turning On
Turning On Make sure the power cord, antenna and microphone are connected to their proper connectors before starting.
NB/ANL
2
NB/ANL SWR 1.5 ANL S/RF
S/RF SWR CAL
VOL
OFF
3
3
CAL
SQ
TX RX
RF
SWR/CAL
1
Setting Channel Selector
Setting Channel Selector
3
SIG 1
5 79 +30dB
DYNAMIKE
MIN
M
E
Note PU SH EN TE NU
MEM
Press CB/WX/PA to select CB, weather channels or PA (public address) modes.
WX !
R
RF GA
MIN
Select one of forty channels and adjust volume. The selected channel (1 through 40) will be indicated by the readout directly above the channel selector knob
Rotate the On/Off Volume knob clockwise to turn unit on and adjust to a normal listening level.
NB /ANL
2
NB/ANL SWR 1.5 ANL S/ RF
S/RF SWR CAL
OFF
CAL
SQ
SCAN
TX
CB /WX/
3
SIG 1
PA
5 79 +30dB
DYNAMIKE
M
U EN
PU SH EN T
MEM
MIN
2
8
DIM ESC
WX !
ER
RF GAIN
MIN
29LX_CHR_MANL.indd 8-9
CH 9/ 19
MEM SCAN
RX
RF
SWR/CAL
VOL
3
DELTA TUNE
MAX
T BACK
SWR CAL
OFF
Press the CB/PA/WX button to change modes.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
9 5/11/11 3:32 PM
Operation Calibrate For SWR (Standing Wave Ratio)
Operation Calibrate for SWR (Standing Wave Ratio)
PUSH & HOLD
SWR calibration is done to properly adjust the length of the antenna and to monitor the quality of the coaxial cable and all RF connections. This calibration is critical in order to achieve optimum performance.
Note
NB /ANL
2
SWR 1.5 S/ RF
3
RX
RF 3
SIG 1
SWR /CAL
VOL
SQ
5 79 +30dB M
DYNAMIKE
EN
U SH EN U P TE
MEM R
3
Push and hold mic button.
NB/ANL
OFF
2
NB/ANL SWR 1.5 ANL
MIN S/ RF
1
S/RF SWR CAL
Select channel 20.SWR /CAL
VOL
OFF
3
CAL M
RF
SQ
SCAN
TX RX
CB /WX/
3
SIG 1
PA
5 79 +30dB
DYNAMIKE
M
E
PU SH EN TE NU
R
RF GAIN
MIN
MIN
Press SWR/CAL button to select CAL.
CH 9/ 19
Note The reading will be slightly higher on Channels 1 and 40 compared to Channel 20.
MEM SCAN
4
2
Calibration must be made in an open area (never in a garage). Vehicle doors must be closed. No one should be standing near the antenna. (See your antenna directions for more complete information).
CAL
DELTA TUNE
MAX
T BACK
DIM ESC
SWR CAL
OFF
While holding mic button adjust the SWR CAL knob so the meter swings to the CAL mark on the meter (located on the right). continued
10 29LX_CHR_MANL.indd 10-11
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
11 5/11/11 3:32 PM
Operation
Operation
Calibrate for SWR continued
S/RF
To Receive
RX 5 79 +30dB
3
SIG 1
SWR/CAL
When switched to SWR mode the meter reading should ideally be as far to the left as possible. Anything over 3 is not acceptable. A slight antenna height adjustment (higher or lower) may be required. Repeat recalibration steps.
CAL
RF
SWR
VOL
3
2
SWR 1.5
Note
Selecting A Channel
Selecting A Channel
NB/ANL
SQ
M
DYNAMIKE
OFF
EN
RX
F U SH EN U P TE
3
SIG 1
MEM
5 79 +30dB
R
DYNAMIKE
M
EN
U SH EN U P TE
MEM R
RF GAIN
M
MIN
MIN
MIN
5
6
Release the PTT button, press and release the S/RF-SWR CAL button to the SWR position. Then press the PTT button to read the SWR reading. Repeat the same steps two through five on Channel 1 and 40. This will check SWR for all channels.
Unit should be in CB mode. Rotate channel selector clockwide or counter-clockwise to select desired channel.
1
S-Meter
Swings proportionately to strength of incoming signal when receiving. SWR 1.5
2
3
CAL
RX
NB/ANL
S/RF
S/RF SWR CAL
OFF
3
3
5 79 +30dB
DYNAMIKE
MIN
SIG 1 M
U EN
PU SH EN
TE
MEM
12 29LX_CHR_MANL.indd 12-13
3
5 79 +30dB
W
R
VOL
SQ
DYNAMIKE
M
EN
U SH EN U P
MIN
1 1
RF
RX
SIG 1
SQ
S/RF
CAL
RF
SWR /CAL
VOL
2
MAX
S-Meter
To Receive
NB/ANL SWR 1.5 ANL
DEL
Rotate the On/Off Volume knob clockwise. The RX icon will be displayed.
The S/RF-SWR-CAL switch must be in the S/RF setting to read the meter.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
13 5/11/11 3:32 PM
Operation To Transmit
Operation Setting ® Dynamike
Setting Dynamike®
To Transmit
This controls the microphone sensitivity (outgoing audio level). Caution!
NB /ANL
Be sure to read the F.C.C. Rules and Regulations included with this unit before transmitting.
S/ RF
S/RF SWR CAL
VOL
1
Transmit
2
14
OFF
Select desired channel. 3
3
CAL
SQ
TX RX
RF
SWR/CAL
PUSH & HOLD
29LX_CHR_MANL.indd 14-15
2
NB/ANL SWR 1.5 ANL
Be sure the antenna is properly connected to the radio before transmitting. Prolonged transmitting without an antenna, or a poorly matched antenna, could cause damage to the transmitter.
3
SIG 1
5 79 +30dB
DYNAMIKE
M
EN
U SH EN U P TE
M R
MIN
Initially, set fully clockwise so that maximum voice volume is available. Dynamike may have to be reduced in some conditions.
Push and hold mic button to transmit. Transmitter is now activated. When transmitting, hold the microphone two inches from your mouth and speak in a clear, normal voice. Release to receive. For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
15 5/11/11 3:32 PM
Operation
Operation
Menu Mode
Using the clock, alarm and countdown functions. To set the clock, press Menu/Enter knob and select Set Clock.
Used to program special features. Menu/Enter knob is used to move cursor to desired feature to program. NB /ANL
Note Use Dim/Escape button to exit from any routine back to CB standby mode.
S/ RF
S/RF SWR CAL
VOL
3
2
NB/ANL SWR 1.5 ANL
CAL
SET CLOCK ALARM CLOCK SET COUNT DOWN
TX RX
RF 3
SIG 1
SWR/CAL
SQ
5 79 +30dB M
DYNAMIKE
EN
U
OFF
3
2
ANL Press Menu/Enter knob to select feature to be S/ RF S/RF programmed. RF
S/ RF
S/RF SWR CAL
CAL
SQ
5 79 +30dB
3
SIG 1
M
DYNAMIKE
S/RF
S/RF SWR CAL
SWR/CAL U SH EN U P TE
EN
SQ Level 3:
NB/ANL
NB/ANL SWR 1.5 ANL OFF
S/RF SWR CAL
RF
SWR /CAL
VOL
SQ
3
CAL
RX 5 79 +30dB
3
S/RF
OFF
SWR/CAL U SH EN U P
M
DYNAMIKE
WX !
M
EN
S/RF
OFF
S/RF SWR CAL
MIN SWR/CAL
VOL
OFF
29LX_CHR_MANL.indd 16-17
SQ
2
TE
SIG MEM
R
Level 5:
3
CAL
M
EXIT
TX
16
MIN
MINMIN
5 79 +30dB
DYNAMIKE
EN
M
E
MEM
SCAN NB/ANL ANL MEM SCAN
U
CB /W S/RF PA SWR PU SH EN CALT E R
VOL
MEM SCAN CB /WX/
PA
WX !
CH 9/ 19 SWR
DELTA TUNE
MIN 1.5 2
3
MEM
WX !
1 SIG SWR
3
CAL RF GAIN
SCAN TX
RX OFF /WX/ CB
DELTA TUNE CH 9/ 19
DYNAMIKE
PA
X/ CB /WMAX
PA
CH 9/ 19
Note
MEM
M
EN
DIM ESC
OFF
CH 9/ 19
MEM SCAN CB /WX
DIM
/
PA
ESC
WX !
ER
Setting the Alarm RF GAIN
DELTA TUNE
T BACK
Your 29 LX CHR LE can be utilized as an alarm clock. To set the alarm, press Menu/Enter knob SWR and select Set Alarm. CAL
SWR CAL
ESC
MAX
MIN
CH 9/ 19
SET CLOCK ALARM CLOCK SET COUNT DOWN
DIM ESC
TE
MEM
OFF
SCAN
Setting the Alarm
CH 9/ 19
MEM SCAN CB /WX
PA
/
DIM ESC
WX !
RotateR Menu/Enter knob clockwise to select Set SWR RF GAIN DELTA TUNE T BACK Alarm Time. Follow instructions above for settingCAL the alarm time and AM or PM.
WX !
R
RF GAIN
DELTA TUNE
T BACK
SWR
CAL For Sales Please Contact RoadTrucker Inc (www.RoadTrucker.com) MAX MIN OFF InformationMIN 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281 MIN
ESC
DIM
T BACK P USWR S H EN CAL U
MEM SCAN
MIN
PU SH EN T
MEM SCAN
5 79 +30dB
SCAN
SQ
T BACK
CAL
CONTRAST RADIO CHECK MAX MIN DIM RF SETTINGS ESC
T BACK
OFF MEM
M SCAN
TONES DYNAMIKE WX ALERT DIM WX ALERT SCAN ESC
SWR RF GAIN CAL Level 4:
MAX
PU SH EN TE NU
U EN
R
OFFX/
+30dB
WX !
RX
5 79 +30dB
T BACK
SWR/CAL RFDYNAMIKE GAIN DELTA TUNE
SQ
OFF 3
SIG 1
U SH EN U P TE
3
RX
RF
PA
CAL TX WX AUTO SCAN RX COLOR S/RF DISPLAY RF MINMIN MAX S/ RF SWR CAL BRIGHTNESS 3 5 79 1
VOL 2
CB /WX/
DIM
/
PA
SCAN
SET AM-PM 11:30 PM EXIT
TX
CH 9/ 19
SCAN
OFF
NB/ANL
NB/ANL SWR 1.5 ANL
EN
CAL
VOLMEM SCAN SQKEY
DYNAMIKE RF GAIN DELTA NB /ANLTUNE
NB/ANL SWR 1.5 ANL
TX
MIN
SIG 1
MEM
R
VOL
NB /ANL
2
3 2 CAL TX SET CLOCK ALARM CLOCK RX RF SET COUNT DOWN 3 5 79 SIG 1 +30dB
3
1
LevelSIG 2:
SWR/CAL
NB/ANL SWR 1.5 ANL
TX RX
RF
SWR /CAL
VOL
3
2
NB/ANL SWR 1.5 ANL
S/ RF
Level 1:
NB/ANL
Note Use Dim/Escape button to exit MEM WX ! PU SH EN TE 12:00R PM will appear in the display and the hours from any routine back to CB RFMenu/Enter GAIN DELTA TUNEclockwise T BACK to SWR standby mode. will flash. Rotate knob CB /WX
The minutes will then flash. Rotate Menu/Enter knob The radio should be connected again to select desired minutes and press toOFFset. to a constant 12V to run the MAX MIN clock continuously. Once the minutes are set, AM or PM will then flash. Rotate Menu/Enter knob again to select AM or PM and press to set or scroll down to EXIT and press to return to main menu.
NB /ANL
SWR CAL
MEM SCAN
select desired hour and press to set.
MIN
NB/ANL SWR 1.5
CH 9/ 19
SCAN
Note Normal display will appear if clock has not yet been set.
CAL
Rotate Menu/Enter knob clockwise to navigate menu levels.
NB /ANL
Setting the Clock
Setting the Clock
Menu Mode
MAX
OFF
OFF
17 5/11/11 3:32 PM
Operation
Operation Setting the Alarm continued 3
2
NB/ANL SWR 1.5 Note ANL
CAL
RX Default snooze time length S/RF RF is 10 minutes. SWR CAL 3 5 79 SIG 1 +30dB Note L U EN Press Dim/Escape buttonMto VOL SQreturn to DYNAMIKE CB standby mode.
S/RF SWR CAL
VOL
3
2
CAL
SQ
5 79 +30dB
3
M
DYNAMIKE
ESC
WX !
EN
U SH EN U P TE
MEM
MEM SCAN CB /WX
WX !
NB/ANL
Note Press Dim/Escape 3 NB/ANL SWR 1.5 2 button to return to CB mode.CAL ANL
NB/ANL
SIG 1
5 79 +30dB U EN
DYNAMIKE
SQ
PU SH EN
MEM
29LX_CHR_MANL.indd 18-19
CAL
VOL
SQ
2
3
ESC CAL TX
DYNAMIKE RX
S/RF
MIN
S/RF
3
CH 9/
SCAN
EN
U SH EN U P TE
PA
1
M
MINMIN
TX RX
PU SH EN T E3 NU R NB/ANL2ESWR 1.5 2 M ANL
S/RF SWR CAL
ANTENNA RF PASS 1
SIG SWR/CAL MEM U SH EN U P TE EN R M
MAX
OFF
PRESS PTT TO CHECK ANTENNA MEM CAL
SCAN
MIN
OFF
CB /WX/
PA
3
CH 9/ 19
SCAN
ANTENNA TUNE FAILDIM
MEMDELTA SCAN
T BACK
DIM
PA
M
E
PU SH EN TE NU
SWR CAL
SCAN
R
MAX
CB /WX/
PA
MIN
DIM ESC
WX !
SWR
OFF
CH 9/ 19
MEM SCAN
ESC
MEM
ESC
ESC
CB /WX/
3 5 79 +30dB WX !
MINMIN
CH 9/ 19
MEM SCAN
WX !
TX RXRF GAIN
MAX
MIN
DIM
Note SWR Press button to T BACKDim/Escape CAL return to CB standby mode. If 10 seconds pass or if Enter button pressed, testing is OFF complete. Unit will return to CB Standby mode.
WX !
R
SQ DYNAMIKE RF GAIN DYNAMIKE RF GAIN DELTA TUNEMAXT BACK MIN OFFSQ MIN ContactVOL CAL For SalesVOL Information Please RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281 MAX OFF
OFF
CB /WX/
ESC
MEM
CH 9/ 19
MEM SCAN
CB /WX/
PA
3 5 79 SIG 1 +30dB MEM WX !
SCAN
19 RF POWER OUTPUT FAILDIM
MEM SCAN
SWR Test 3- DYNAMIKE Antenna Mismatch Warning: Press DELTA TUNE SQ RF GAIN RF GAIN DELTA TUNE T BACK CAL Push-to-Talk button to check antenna/radio for proper matching.
OFF
R Press Menu/Enter knob to select On/Off and SWR S/RF RF M DELTASWR TUNE T BACK CAL exit to main menu. RF GAIN CAL 3 5 79 SIG 1 +30dB
TE
18 MIN
3
CH 9/ 19
SCAN
SWR/CAL
OFF
2
S/RF RF SWR MEM SCAN CAL 3 5 79 SIG 1 DIM NB/ANL +30dB CB /WX/ PA
NB/ANL SWR 1.5 ANL
WX !
S/RF SWR CAL
VOL
DYNAMIKE
ANL
3 2 CAL TX RF POWER OUTPUT RX PASS RF
SWR/CAL U SH EN U P TE EN R M
OFF
S/ RF SET KEY TONES ON SWR /CAL OFF
TX
RF
SQ
SWR/CAL
Press Menu/Enter knob and rotate clockwise to Set Key Tones. Press Menu/Enter to set Key NB /ANL OFF MIN Tones On/Off. NB/ANL SWR 1.5 RX
2
NB/ANL SWR 1.5 ANL
S/RF
Key Tones Mode On and Off VOL
NB/ANL
VOL
MAX
MIN
Key Tones Mode
SWR/CAL
Note Press Push-To-Talk within 10 seconds or unit will go to the next test. Note Press Dim/Escape button to return to CB standby mode. If 10 seconds pass or if Enter button pressed, go to 3rd test.
ESC
NB/ANL
3
3
1
DIM
/
PA
R Follow instructions in Setting the Clock section SWR RF GAIN DELTA TUNEandT BACK CAL (page 17) to set count down hour 3 NB/ANL SWR 1.5 2 CAL TX minutes. Once desired count down ANLtime is RX selected, press Menu/Enter knobS/RF again RF to set SWR and return to the standby menu. CAL SIG 1 3 5 7 9 +30dB
MIN
S/RF SWR CAL
2
Test 2- RF Power Output: Confirms 3.3 to 4 Watt output level. Once Push-to-Talk button is pressed, Pass or Fail will be displayed if level is outside limits.
S/RF
S/RF
1
CH 9/ 19
SCAN
SET CLOCK SET ALARM SET COUNT DOWN
TX
Dim/Escape button to return to CB standby mode.
SIG 1
DIM
/
PA
To set the count down timer, press Menu/Enter knob and select Set Count Down.
RX
RF Press
CB /WX
Note Press Dim/Escape button to return to CB standby mode. If 10 seconds pass or if Enter button pressed, unit goes to 2nd test.
Setting the Count Down Timer
Setting the Count Down Timer NB/ANL SWR 1.5 Note ANL
MEM
MEM SCAN
EnterE Rdesired snooze time (from 1 to 60 minutes). SWR GAIN BACK Select Enter to RF exit, return DELTA to SetTUNE SnoozeT or AlarmCAL Length. Select Alarm Length to set alarm duration (from 10 to 300 seconds). Pressing Menu/Enter knob returns unit to exit, Set Snooze or Alarm MAX MIN OFF Length.
Note Default alarm length is 60 seconds and is set in MIN 10 second increments.
OFF
F
PU SH EN T
Allows testing of important radio functions. Test 1- Battery Level: Confirms that battery voltage level is between 10.8 V to 15.8 V. If in that range, it is “PASS”. Outside of that range, either FAIL LOW” or “FAIL HIGH” will be displayed. Press Menu/Enter knob to advance to next test.
CH 9/ 19
SCAN
EXIT SET SNOOZE ALARM LENGTH
TX
Radio Check Mode
Radio Check Mode
Once alarm settings are complete, rotate Menu/Enter knob clockwise to Set Snooze and press to select.
19
OFFDELTA TUNE
MAX
T BACK
OFF
SWR CAL
5/11/11 3:32 PM
Operation
Operation
Setting Display Color Mode Setting Display Color Mode 1
Press Menu/Enter knob to select Set Brightness
Press Menu/Enter knob and scroll down to select Display Color. NB/ANL
2
NB/ANL SWR 1.5 ANL S/RF
S/RF SWR CAL
3
2CAL
RF 3
SIG 1
SWR/CAL
WX AUTO SCAN DISPLAY COLOR BRIGHTNESS
TX RX
5 79 +30dB U EN
VOL
SQ
PU SH EN T
MEM
SCAN
CH 9/ 19
CB /WX/
PA
MAX
MIN
ESC
SWR CAL
OFF
Rotating Menu/Enter knob clockwise changes the display color from green to blue to amber to red then back to green. NB/ANL
Note NB/ANL SWR 1.5 2 3 4 CAL TX Select EXITANL to return to RX S/RF S/RF RF main menu. SWRPress Dim/Escape CAL 3 5 79 1 +30dB button to returnSIG to CB mode. SWR/CAL E
VOL
OFF
SQ
DYNAMIKE
TURN CH KNOB TO SET COLOR EXIT PU SH EN TE NU
MEM
SCAN
CB /WX/
PA
DIM ESC
WX !
R
MIN
CH 9/ 19
MEM SCAN
M Press Menu/Enter knob or escape RF GAIN DELTA button TUNE Tagain BACK to exit routine.
MIN
Note Exit will return to menu mode. ESC will exit and return to CB Standby.
WX !
ER
MIN
Rotate Menu/Enter knob clockwise to Select Brightness. Press Menu/Enter knob to select Day-Bright. Turn Menu/Enter clockwise to increase brightness and turn counter-clockwise to decrease brightness.
DIM
3 OFF
Note If an attempt is made to exceed the highest or lowest brightness levels, 1 error beep will be heard.
MEM SCAN
M Press and release Menu/Enter to set the Tcolor. RF GAIN DELTA TUNE BACK
DYNAMIKE
Setting Brightness Mode
Setting Brightness Mode
MAX
OFF
SWR CAL
Note To select day or night levels, press and release Dim/Escape button once levels are set.
To set the day bright level, turn the Menu/Enter knob clockwise to a desired setting and then press Menu/Enter. To set the Night-Dim level, repeat instructions above then select Night-Dim.
Note To toggle from day to night settings, see page 28.
TURN CH KNOB TO SET LEVEL Press Menu/Enter knob again to exit routine.
Setting Contrast Mode Press Menu/Enter knob and rotate clockwise to select Set Contrast. Press Menu/Enter knob again and rotate clockwise to increase contrast, counter-clockwise to decrease contrast. Press Menu/Enter knob to set contrast.
TURN CH KNOB TO SET CONTRAST
Setting Contrast Mode Note If an attempt is made to exceed the highest or lowest contrast levels, 1 error beep will be heard.
Press Menu/Enter knob again to exit routine. 20 29LX_CHR_MANL.indd 20-21
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
21
Weather Auto Scan 5/11/11 3:32 PM
Operation
Operation
Weather Information
Weather Alert What You Should Know About Weather
Note If you wish to receive a listing of NOAA ‘Weather Radio Transmitter locations, contact your nearest National Weather Service Office.
If threatening weather is nearby, the National Weather Service may broadcast a 10 second alert tone. This tone will be heard through the CB, even if the CB/WX Control is in the CB mode or the unit is turned off. NB/ANL This enables you to monitor CB frequencies and 3 CAL TX SWR 1.5 2 still be warned by the National Weather Service S/RF RF Emergency Alert. When you hear theS/RFalert, press 3 5 79 SIG 1 +30dB the CB/WX/PA button in theSWR WX /CAL mode. You U SH U P EN M will then be able to hear the Weather Warning VOL SQ DYNAMIKE Broadcast. Your 29 LX has a special auto squelch circuit for weather transmission which disables your OFF MIN squelch control.
Service Office, or write to: National Weather Service (Attn: W/OM11) NOAA Silver Springs, MD 20910. For ideal weather reception use a dual band antenna (center load/baseload).
Weather Alert Scan The unit will continually scan all 10 WX channels for 1050 Hz tone. If the tone is detected the unit will activate WX mode on the channel with the tone. Default state is Off. Go to Menu mode to choose On/Off (see page 22): SCAN MEM SCAN
163.275
CB /WX/
PA
EN
TE
CH 9/ 19 DIM ESC
WX ! R
RF GAIN
MIN
DELTA TUNE
MAX
T BACK
SWR CAL
OFF
Weather Auto Scan
If active while in CB or PA mode, will determine if the present WX channel is active. If the present WX channel is not active, will search for the strongest WX channel and auto change to that channel. Default is off. Go to Menu mode to choose on/off (see page 22).
22 29LX_CHR_MANL.indd 22-23
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Weather Channels What is Weather Radio? NOAA Weather Radio (NWR) is a service of the National Oceanic and Atmospheric Administration (NOAA), of the U.S. Department of Commerce. 380 NWR stations are in operation by the U.S. Government in addition to several NWR stations that are maintained by private interest groups. The capability is to supplement warnings by sirens and by commercial radio and television. The 10 National Weather Channels provide full coverage to keep you informed of weather conditions, 24 hours a day, 7 days a week.
23 5/11/11 3:32 PM
Operation
Operation
Note 3 CAL SWR 1.5 2 Press NB/ANL Dim/Escape ANL buttonS/RF to return to CB mode. S/RF RF
SWR/CAL
VOL
3
SIG 1
SQ
NB /ANL
WX ALERT IS OFF ON S/ RF OFF
TX RX
5 79 +30dB M
U SH EN U P TE EN R
MEM
CH 9/ SCAN 19 NB/ANL SWR 1.5 2 MEM SCAN ANL X/ DIM S/RF CB /WRF SWRPA ESC CAL 3 SIG 1
NB /ANL SWR /CAL
3
SWR CAL
3
SIG 1
Note If an alert is detected the unit NB/ANL SWR 1.5 2 will activate WX mode on3 the CAL TX ANL RX channelS/RF withRFthe alert. Use S/RF SWR Menu/Enter knob to select CAL 3 5 79 SIG 1 +30dB SWR/CAL On/Off and press to set. NU NB/ANL
M
E
NB /ANL
CH 9/
SCAN 1.519 2 SWR MIN WX! SCN IS OFFOFF NB/ANL ANL MEM SCAN ON S/ RF S/RF RF DIM SWR PA OFF ESC NB /ANL CAL 3
3
MEM R
PU SH EN
TE
MEM
SWR /CAL
R
SIG 1 NB/ANL SWR 1.5 ANL
2
EN
U SH EN U P TE
Press Menu/Enter knob and rotate clockwise to WX Auto Scan. Press Menu/Enter knob to select On/Off.
Setting Weather Auto MAX Scan MIN
OFF VOL
OFF SQ
MINDYNAMIKE
DIM
PA
SCAN T BACK
ESC
CH 9/ 19
SWR CAL
MEM SCAN
DIM
CB /WX/
ESC
WX ! MAX
MIN
OFF
M To restore default settings, Menu/Enter RF GAIN Press DELTA TUNE T BACK knob again. Rotate Menu/Enter knob clockwise to select Settings then Go To Default.
CAL
MAXVER MIN SOFTWARE GO TO DEFAULT
TX
5 79 +30dB 3 CAL TX N U P U S H E N T
SIG
SWR /CAL
CH 9/ 19
CB /WX/
WX !
SOFTWARE VER RF GAIN DELTA TUNE GO TO DEFAULT MEM
R
RX
Setting Weather Auto Scan
SWR
SCAN
M
E
MEM
RX +30dB
SCAN OFF
PU SH EN TE NU
WX !
RESTORE DEFAULT DELTA TUNE YES RF GAIN NO MEM
SWR CAL
CH 9/ 19
MEM SCAN CB /WX/
DIM
SCAN
CH 9/ 19
PA
ER
Software Version/Factory Settings
MEM SCAN
PA
CB /WX/
RF GAIN DELTA TUNE TSQ BACK VOL and DYNAMIKE CAL S/On/Off RF Press Menu/Enter knob to select S/RF RF exit SWR to main menu. CAL 3 5 79 1
MIN
M TX
U SH EN U P TE
RX
5 79 +30dB
NoteVOL SQ DYNAMIKE Press Dim/Escape button to return to CB mode. OFF
EN
CAL
MAX MIN OFF Press Menu/Enter knob and rotate clockwise to MIN OFF VOL SQ DYNAMIKE WX Alert Scan. Press Menu/Enter knob to select On/Off.
MIN
CONTRAST RADIO CHECK SETTINGS
TX
5 79 +30dB
3 2 SWR SWR 1.5 DELTA TUNE NB/ANL T BACK CAL VOLANL SQ DYNAMIKE
Setting Weather Alert ScanSWR /CAL
CAL
RX
RF GAINto select On/Off and exit Press Menu/Enter knob S/ RF to main menu. S/RF RF
DYNAMIKE
Setting Weather Alert Scan OFF
Displays current software version and returns unit to original factory settings. To view software version, rotate Menu/Enter knob clockwise to select Settings then Software Version.
Turns WX Alert On/Off. Default is Off. Press Menu/Enter knob to select Set WX Alert. If Weather is On, WX Alert Icon will be displayed.
NB/ANL
SWR CAL
Software Version/Factory Settings
Setting Weather Alert Mode
Weather Alert Mode
MEM SCAN
T BACK
CB /WX/
PA
Note Default display color is green.
ESC
SWR CAL
DIM
ESC
WX !
Press Menu/Enter knob to restore default E R M MAX DELTA TUNE TOFF BACK settings. Choose MIN NORFtoGAIN maintain present setting with no change.
SWR CAL
NB/ANL
Note NB/ANL SWR 1.5 2 3 ANL Press Dim/Escape S/RF RF buttonS/RF to return to CB mode. SWR CAL
SWR/CAL
VOL
OFF
3
SIG 1
SQ
CAL
RX
5 79 +30dB
DYNAMIKE
M
EN
U SH EN U P TE
SCAN
CH 9/ MIN 19
MIN
MAX
OFF
MEM SCAN CB /WX/
PA
DIM ESC
MEM R
RF GAIN
DELTA TUNE
T BACK
SWR
Press Menu/Enter knob to select On/Off and exitCAL to main menu. MIN
MIN
24 29LX_CHR_MANL.indd 24-25
OFF AUTO SCN IS OFF ON OFF
TX
MAX
OFF
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
25 5/11/11 3:32 PM
Operation
Operation Program Memory Channels
NB-ANL/OFF (Noise Blanker/Automatic NB-ANL/OFF (Noise Blanker / Noise Limiter) Button Automatic Noise Limiter) Button
Set first channel. Press and hold Scan/MemScan button. Memory icon will appear. Select second channel, press and hold Scan/MemScan button again until Memory icon appears. Repeat above steps to enter up to 10 channels in memory. CH 9/ SCAN
NB/ANL
Note
NB/ANL SWR 1.5 ANL
The RF noise blanker is very effective in reducing repetitive noises such as ignition interference.
S/ RF
S/RF
2
3
CAL
SIG 1
SWR /CAL
3
VOL
SQ
CB /WX/
NB/ANL
PA
5 79 +30dB
3 2 1.5 MEM NB/ANL WX ! CAL TX U S H SWR U PANL E N T E R RX S/RF M S/RF RF RF GAIN SWR CAL 3 5 79 SIG 1 +30dB SWR/CAL
DYNAMIKE
The radio should be squelched before scan features are activated. Note
MEM SCAN
DELTA TUNE
When switched to ANL the Automatic Noise Limiter is activated. This helps reduce noise VOL SQ DYNAMIKE created OFF by the vehicle’s electronics. MAX MIN MIN When switched to NB/ANL mode the RF Noise Blanker is also activated, providing OFFincreased MIN noise filtration. When switched to OFF mode all noise 3 NB/ANL SWR 1.5 2 CAL TX ANL filtration will be turned off. RX S/RF M
E
PU SH EN TE NU
DIM ESC
EN
1
Note
19
TX RX
RF
Program Memory Channels
T BACK
Keying the microphone will stop the scan feature.
CH 9/ 19
SCAN MEM SCAN
SWR CAL
Note
DIM
CB /WX/
PA
ESC
MEM R
RF GAIN
DELTA TUNE
OFF
MIN
MAX
If more than 10 channels are attempted to be programmed, 3 error beeps will be heard and “Memory Full” will be displayed for 10 seconds or until any button is pushed.
SWR CAL
T BACK
OFF
NB/ANL
S/RF
RF Gain Control
SWR CAL
RF Gain Control
RF
VOL
3
SIG 1
SWR/CAL
SQ
The RF Gain is used to optimize reception in strong or weak signal areas. OFF
M
E
PU SH EN TE NU
MEM
1
To remove a channel from memory, go to the unwanted memory channel then press and hold the scan button until the MEM icon turns off.
ESC
WX !
R
RF GAIN
MIN
Note
DIM
CB /WX/
PA
5 79 +30dB
DYNAMIKE
CH 9/ 19
SCAN MEM SCAN
DELTA TUNE
SWR CAL
T BACK
Pressing the Scan/Memory Scan button MIN OFF toggles from OffMAX to Scan All Channels to Memory Channel Only Scan and back to Off.
Note If in WX mode the unit will scan Weather channels.
NB /ANL
NB/ANL SWR 1.5 ANL
Note
S/ RF
The RF Gain is used to optimize reception in weak signal areas.
S/RF SWR CAL
1
26 29LX_CHR_MANL.indd 26-27
3
CAL
SQ
SIG 1
SCAN
TX
CB /WX/
3
PA
5 79 +30dB
DYNAMIKE
Rotate the RF Gain knob counterclockwise to reduce gain in strong signal weak OFF areas. InMIN signal areas turn clockwise to increase gain.
M
EN
CH 9/ 19
MEM SCAN
RX
RF
SWR/CAL
VOL
2
U SH EN U P TE
MEM R
RF GAIN
2
DIM ESC
WX !
DELTA TUNE
T BACK
SWR CAL
Press Dim/Escape button to end Scan and OFF MAX returnMINto CB mode.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
27 5/11/11 3:32 PM
Operation
Operation
Scan CB Channels
Setting Squelch
Scan CB Channels
Setting Squelch
To scan all 40 CB channels, the unit must be squelched. Press and release Scan/Mem Scan button once.
Squelch is the “control gate” for incoming signals.
Gate closed STRONG SIGNALS
S/RF
S/RF SWR CAL
3
2
NB/ANL SWR 1.5 ANL
CAL
RX
RF
SWR/CAL
SQ DYNAMIKE Scan Memory Channels
M
VOL
OFF
EN
U SH EN U P TE
CB /WX
/
DELTA TUNE
T BACK
To scan memory channels, press and release Scan/Mem Scan button twice. MAX
MIN
MEDIUM SIGNALS
DIM ESC
R
Scan Memory Channels RF GAIN
MIN
CH 9/ 19
MEM SCAN
PA
5 79 +30dB
3
SIG 1
SCAN
CB SCAN 27.405
TX
WEAK SIGNALS
SWR CAL
1
Full clockwise rotation closes the gate allowing only very strong signals to enter.
NOISE
G AT E C L O S E D
NB/ANL
OFF
NB/ANL
S/RF
S/RF SWR CAL
CAL
SQ
M
DYNAMIKE
Dimmer Control
CH 9/ 19
Gate open
MEM SCAN CB /WX
/
PA
5 79 +30dB
3
SIG 1
SCAN
CB MEM SCAN 27.405
TX RX
RF
SWR/CAL
VOL
3
2
NB/ANL SWR 1.5 ANL
DIM ESC
STRONG SIGNALS
MEM
U SH EN U P TE EN R
RF GAIN
DELTA TUNE
Dimmer Control
T BACK
SWR CAL
MEDIUM SIGNALS
NB /ANL
S/RF SWR CAL
RF
SWR /CAL
VOL
OFF
SQ
3
CAL
MIN
SCAN
TX
MIN
RX
CB /WX/
3
SIG 1
PA
5 79 +30dB
DYNAMIKE
M
U EN
PU SH EN
1
MIN
28 29LX_CHR_MANL.indd 28-29
TE
MEM
CH 9/ 19
MAX MEM SCAN ESC
WX !
2
R
RF GAIN
WEAK SIGNALS
OFF DIM
DELTA TUNE
T BACK
SWR CAL
Press Dim/Esc button to toggle between day and night settings. See setting instructions on page 21. MIN OFF MAX
Full counterclockwise rotation opens the “gate” allowing all signals in.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
NOISE
G AT E OPEN
2
NB/ANL SWR 1.5 ANL
OFF S/ RF
29 5/11/11 3:32 PM
Operation
Operation
Setting Squelch Continued
External Speaker
Gate set to Desired Squelch Setting (DSS)
External Speaker
The external speaker jack is used for remote receiver monitoring.
STRONG SIGNALS
Note The external speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts. When the external speaker is plugged in, the internal speaker is automatically disconnected. See accessory page 41.
MEDIUM SIGNALS
WEAK SIGNALS
G AT E
NOISE
3
To achieve the Desired Squelch Setting (DSS), turn the Squelch control counterclockwise until you hear noise. Now turn the control clockwise just until the noise stops. This is the DSS setting. 1
S/RF Meter
S/RF Meter
Connect an external speaker to the external speaker jack on the rear panel.
Note Cobra external speakers are rated at 10 watts.
This meter swings proportionately to the RF output (outgoing signal) while transmitting.
1
30 29LX_CHR_MANL.indd 30-31
The S/RF-SWR-CAL button must be in the S/RF mode. For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
31 5/11/11 3:32 PM
Operation
Operation
PA (Public Address)
PA (Public Address)
PUSH & HOLD
Note Speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts. Note The speaker should be directed away from the microphone to prevent acoustic feedback.
1
Note
Connect an external PA speaker to the PA jack on the rear panel.
Activity on the CB channel will be heard through the PA speakNB/ANL er. Adjust Volume Control to a 3 NB/ANL SWR 1.5 2 CAL normalANL listening level. S/RF
S/RF
CB /WX/
3
SWR/CAL
OFF
SQ
PA
5 79 +30dB
DYNAMIKE
M
EN
U SH EN U P TE
R
RF GAIN
MIN
MIN
2
32 29LX_CHR_MANL.indd 32-33
Push and hold microphone button and speak in a normal voice. Your voice will now transmit on the PA speaker.
4
Adjust PA speaker volume with the Dynamike® control.
CH 9/ 19
MEM SCAN
RF SIG 1
VOL
SCAN
3
DELTA TUNE
MAX
T BACK
DIM ESC
SWR CAL
OFF
Press CB/WX/PA button to select PA.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
33 5/11/11 3:32 PM
Home And Office Set-Up Base Station Operation (From 120V AC House Current)
Temporary Mobile Set-Up
Base Station Operation (From 120V AC House Current) To operate your transceiver from home or office you will need a 13.2 volt DC Power Pack rated at a minimum of 2 amps, and a properly installed base station antenna.
+
Warning! Do not attempt to operate this transceiver by connecting it directly to 120V AC.
Plug power cable into back of unit marked “Power”. Be sure to observe polarity markings.
3
Connect properly installed and matched base station antenna.
—
Temporary Mobile Operation
Note
For temporary mobile operation you may want to purchase an optional cigarette lighter adapter from your COBRA dealer. This adapter and a magnetic mount antenna allow you to quickly “install” your transceiver for temporary use.
For further information call Cobra Customer Service 1.773.889.3087.
1
34 29LX_CHR_MANL.indd 34-35
2
Temporary Mobile Set-Up
Simply connect the red (+) and black (-) leads of the transceiver to the corresponding terminals of the power pack.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
35 5/11/11 3:32 PM
How Your CB Can Serve You
How Your CB Can Serve You • • • • • • • • •
A Few Rules You Should Know
Channel 9 Emergency Messages
Warn of traffic problems Provide weather and road data Provide help in event of an emergency Provide direct contact with home or office Assist police by reporting erratic drivers Get “local information” to find destination Communicate with family and friends Suggest spots to eat and sleep Keep you alert while traveling
A Few Rules You Should Know
A. Conversations cannot last more than 5 minutes with another station. A one minute break is required to let others use the channel. B. You cannot blast others off the air by use of illegally amplified transmitters or illegally high antennas. C. You cannot use CB to promote illegal activities. D. Profanity is not allowed. E. You may not transmit music with a CB. F. Selling of merchandise and/or services is prohibited.
The FCC gives these examples of permitted and prohibited messages for channel 9. These are only guidelines and not all-inclusive:
Permitted
Example Message
Yes
“Tornado sighted six miles north of town.” “Post number 10. No tornado sighted.”
No Yes No Yes
No Yes
1. Set to channel 9 for emergencies
Be sure antenna is properly connected.
2. CB Distress Data
When transmitting an emergency, you should request a “REACT BASE” and provide the CB distress data (called CLIP):
Note
C L I P
If no response on channel 9, try channels 19 or 14.
all Sign ocation njuries roblem
Identify yourself. Be exact. Number. Type. Trapped? Give details and help needed.
No
Yes No
“Out of gas on I-95 at mile marker 211.” “Out of gas in my driveway.” “Four car accident on I-94 at Exit 11. Send police and ambulance.” “Traffic moving smoothly on I-94.” “Weather Bureau has issued thunderstorm warning. Bring sailboat into port.” “Attention motorists. Weather Bureau advises snow tomorrow will accumulate 4 to 6 inches.” “Fire in building at 539 Main, Evanston.” “Halloween patrol number 3. All quiet.”
Transmit CLIP repeatedly so any monitor can assist. 36 29LX_CHR_MANL.indd 36-37
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
37 5/11/11 3:32 PM
How Your CB Can Serve You CB 10-Codes Citizen Bands have adopted the “10-CODES” for standard questions and answers. These codes provide quick and easy communication, especially in noisy areas. Following are some of the more common codes and meanings: Code 10-1 10-2 10-3 10-4 10-5 10-6 10-7 10-8 10-9 10-10 10-11 10-12 10-13 10-16 10-17 10-18 10-19 10-20 10-21 10-22 10-23 10-24 10-25 10-26 10-27 10-28
38 29LX_CHR_MANL.indd 38-39
Meaning Receiving poorly Receiving well Stop transmitting OK, message received Relay message Busy, stand by Out of service, leaving In service, subject to call Repeat message Transmission completed standing by Talking too rapidly Visitors present Advise weather/roads Make pick up at Urgent business Anything for us? Return to base My location is Call by phone Report in person to Stand by Completed last assignment Can you contact Disregard last info Moving to channel Identify your station
Code 10-29 10-30 10-33 10-34 10-35 10-36 10-37 10-38 10-39 10-41 10-42 10-43 10-44 10-45 10-50 10-60 10-62 10-63 10-64 10-65 10-67 10-70 10-71 10-77 10-81 10-82 10-85 10-91 10-93 10-94 10-99 10-200
Meaning Time is up for contact Does not conform to FCC rules Emergency traffic Trouble at this station Confidential information Correct time is Wrecker needed at Ambulance needed Message delivered Turn to channel Traffic accident at Traffic tie up at Have a message for All units within range please report Break channel What is next message number? Unable to copy. Use phone Net directed to Net clear Awaiting your next message/assignment All units comply Fire at Proceed, transmission in sequence Negative contact Reserve hotel room for Reserve room for My address is Talk closer to mic Check my frequency on this channel Give me a long count Mission completed, all units secure Police needed at
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
39 5/11/11 3:32 PM
Frequency Ranges
29 LX CHR LE Specifications
The Cobra 29 LX CHR LE transceiver represents one of the most advanced AM two-way radios used as a Class D station in the Citizens Radio Service. This unit features advanced Phase Lock Loop (PLL) circuitry providing complete coverage of all 40 CB channels. Channel Channel CB Freq. CB Freq. WX Freq. Channel In MHz Channel In MHz Channel In MHz 1 2 3 4 5
26.965 26.975 26.985 27.005 27.015
21 22 23 24 25
27.215 27.225 27.255 27.235 27.245
6 7 8 9 10
27.025 27.035 27.055 27.065 27.075
26 27 28 29 30
27.265 27.275 27.285 27.295 27.305
11 12 13 14 15
27.085 27.105 27.115 27.125 27.135
31 32 33 34 35
27.315 27.325 27.335 27.345 27.355
16 17 18 19 20
27.155 27.165 27.175 27.185 27.205
36 37 38 39 40
27.365 27.375 27.385 27.395 27.405
40 29LX_CHR_MANL.indd 40-41
1 2 3 4 5 6 7 8 9 10
162.550 162.400 162.475 162.425 162.450 162.500 162.525 161.650 161.775 163.275
GENERAL CHANNELS FREQUENCY RANGE FREQUENCY TOLERANCE FREQUENCY CONTROL OPERATING TEMPERATURE RANGE MICROPHONE INPUT VOLTAGE Current Drain
CB - 40 CH CB - 26.965 TO 27.405 MHZ WX - 162.400 TO 162.775 MHZ 0.005 % PLL (PHASE LOCK LOOP) SYNTHESIZER
-30° C TO + 50° C Plug-in dynamic 13.2VDC nom. (positive or negative ground) Transmit: AM full mod., 1.5A (maximum) Receive: Squelched, 0.3A; full audio output, 1.2A (nominal) Size ..............................................................8-5/8” D x 7-9/32” W x 2-13/63” H Weight ..........................................................4 lbs. Antenna Connector .................................UHF; SO-239 Meter.............................................................Indicates relative power output received signal strength, and vswr TRANSMITTER Power Output ............................................4 watts Modulation .................................................AM (Amplitude Modulation) Frequency Response ...............................300 to 3000 Hz Output Impedance ..................................50 ohms, unbalanced RECEIVER Sensitivity ....................................................Less than 1 µV for 10 dB (S+N) /N Selectivity ....................................................6 dB @ 7 KHz, 60 dB @ 10KHz Image Rejection ........................................80 dB, typical Adjacent-Channel Rejection ................60 dB, typical IF Frequencies ...........................................Double Conversion: 1st: 10.695 MHz 2nd: 455 KHz Automatic Gain Control (AGC) ............Less than 10 dB change in audio output for inputs from 10 to 50,000 microvolts RF Gain range ............................................40 db Noise Blanker .............................................RF type Squelch ........................................................Adjustable; threshold less than 1µV Audio Output Power ...............................4 watts Frequency Response ...............................300 to 3000 Hz Distortion ....................................................Less than 7% @3 watts @ 1000 Hz Built-in Speaker .........................................8 ohms, 5w External Speaker (Not supplied)............ 8 ohms; disables internal speaker when connected PA SYSTEM Power Output ............................................4 watts into external speaker External Speaker for PA..........................8 ohms 4 Watts min. (Not Supplied) ...........................................the PA speaker also monitors the receiver; separate jack provided (SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE)
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
41 5/11/11 3:32 PM
Limited Two Year Warranty
Optional Accessories You can find quality Cobra products and accessories at your local Cobra dealer, or in the U.S.A., you can order directly from Cobra. See ordering info on page 38.
COBRA ELECTRONICS CORPORATION warrants that its Cobra CB Radios, and the component parts thereof, will be free of defects in workmanship and materials for period of two (2) years from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A. Cobra will, without charge, repair or replace, at its option, defective CB radios, products or component parts upon delivery to the Cobra factory Service Department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobra’s expense, if the product is repaired or replaced under warranty. Exclusions: This limited warranty does not apply; 1) to any product damaged by accident; 2) in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) if the serial number has been altered, defaced or removed; 4) if the owner of the product resides outside the U.S.A.
Replacement DC Power Cord For in vehicle use 426-002-N-001
Replacement Mounting Bracket For in vehicle use 251-353-9-001
Replacement Thumb Screws For in vehicle use 634-081-9-001
Replacement Microphone Bracket For in vehicle use 741-080-9-001
21” Base Loaded Magnet Mount Antenna
38” Base Loaded Magnet Mount Antenna
HG A1000
HG A1500
Cobra Electronics Corporation 6500 West Cortland Street Chicago, Illinois 60707 www.cobra.com
All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Cobra shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
42 29LX_CHR_MANL.indd 42-43
Dynamic External Speaker
Noise Canceling External Speaker
HG S100
HG S300
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Noise Canceling With Talk Back External Speaker HG S500
43 5/11/11 3:32 PM
29 LX CHR LE If You Think You Need Service For technical assistance, please call our Automated Help Desk which can assist you by answering the most frequently asked questions about Cobra products.
(773) 889-3087
24 hours a day, 7 days a week. A Consumer Service Representative can be reached through this same number
Operating Instructions for your Cobra 29 LX CHR LE Limited Edition CB Radio
The CB Story 2 1 NB/ANL
8:00 am - 5:30 pm, Monday through Friday, Central Time.
NB/ANL SWR 1.5 ANL S/RF
Technical assistance is also available on-line in the Frequently Asked Questions (FAQ) section at www.cobraelec.com or by e-mail to
[email protected]
S/RF SWR CAL
VOL
OFF
2
3
3
5 79 +30dB
CAL
SQ
SCAN
TX
CB/WX/
SIG 1
DYNAMIKE
MIN
PA
M
U EN
PU SH EN
TE
MEM R
RF GAIN
MIN
DELTA TUNE
MAX
3
T BACK
ESC
OFF
SWR CAL
FCC Regulations
FCC regulations permit only “transmissions” (one party to another) rather than “broadcasts” (to a wide audience). Thus, advertising is not allowed on CB Channels because that is “broadcasting.”
FCC Warnings
4
All transmitter adjustments other than those supplied by the manufacturer as front panel operating controls, must be made by, or under the supervision of, the holder of an FCC-issued General Radio-Telephone Operator’s License.
5
Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Cobra, may cause violation of the technical regulations of Part 95 of the FCC Rules, or violation of Type Acceptance requirements of Part 2 of the Rules.
cb tranceiver
You should read and understand Part 95 (included with this unit) of the FCC Rules and Regulations, before operating your Cobra radio, even though the FCC no longer requires you to obtain an operator’s license.
U.S. Patent Nos. D625279, D630202 & D630625
Trademark Info
What’s Included with Your 29 LX CHR LE ©2011 Cobra Electronics Corporation Printed in China Part No. 480-716-P Version B
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281 29LX_CHR_MANL.indd 44-46
DIM
WX !
If you think you need service call 1.773.889.3087
Cobra®, Dynamike®, Nothing Comes Close to a Cobra® and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA.
CH 9/ 19
MEM SCAN
RX
RF
SWR/CAL
“If your product should require factory service please call Cobra first before sending your unit in. This will ensure the fastest turn-around time on your repair.” You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the following in order to have the product serviced and returned. 1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction or carbon or a sales receipt. If you send the original receipt it cannot be returned. 2. Send the entire product. 3. Enclose a description of what is happening with the unit. Include a typed or clearly print name and address of where the unit is to be returned. 4. Pack unit securely to prevent damage in transit. If possible, use the original packing material. 5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or First Class Mail: to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation, 6500 W. Cortland St., Chicago, IL 60707. 6. If the unit is in warranty, upon receipt of your unit it will either be repaired or exchanged depending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call 1.773.889.3087 for assistance.
The Citizens Band lies between the shortwave broadcast and 10-meter Amateur radio bands, and was established by law in 1949. The Class D two-way communications service was opened in 1959. (CB also includes a Class A citizens band and Class C remote control frequencies.)
Nothing Comes Close to a Cobra®
6
1. 2. 3 4.
CB transceiver Microphone Transceiver bracket Microphone bracket
5. 6. 7. 8.
Operating Manual DC power cord FCC rules (not shown) Certificate of Authenticity (not shown)
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) A1 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281 5/11/11 3:32 PM
Controls and Indicators
Our Thanks to You
Optional Accessories
Front Side 1. 4-Pin Microphone Connector 2. Power On/Off, Volume 3. Squelch 4. Dynamike 5. Menu/Enter/Channel Selector 6. RF Gain 7. Delta Tune 8. Talk Back Control 9. SWR Calibration 10. Dim/Escape Button 11. Channel 9/Channel 19 Button 12. Scan/Memory Scan 13. CB/WX Weather/PA Button 14. LCD Display 15. RX (Receive)/TX (Transmit), Indicators 16. Signal Strength Meter 17. NB/ANL Button 18. S/RF SWR CAL Button 19. 1Microphone Back Side 20. Public Address Speaker Jack 21. External Speaker Jack 22 Antenna Connector 23. Power Jack
Main Icons
19
Customer Support Intro
Should you encounter any problems with the product or not understand its many features, please refer to this owner’s manual. If , after referring to the manual, you still need help, call Cobra Customer Service at 773.889.3087.
Operation
Installation
Customer Assistance
Warranty
Customer Assistance
Secondary Icons
17
16
NOTE
12
15 14
NB /ANL
2
NB/ANL SWR 1.5 ANL
18
S/ RF
S/RF SWR CAL
1
CAL
3
5 79 +30dB
DYNAMIKE
M
EN
U SH EN U P TE
MEM
RF GAIN
CB/ WX
DELTA TUNE
MAX
MIN
5
4
13
WX !
MEM SCAN
DIM
/
PA
ESC
R
MIN
2
CH 9/ 19
SCAN
TX RX
SIG 1
SQ
OFF
3
RF
SWR /CAL
VOL
6
T BACK
7
OFF
8 9
3
SWR CAL
11 10
Notice
This device complies with part 15 of the FCC Rules. Operation Caution Warning is subject to the following two (2) conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Ordering From U.S.A.
Call 773-889-3087 for pricing or visit www.cobra.com.
Cobra Customer Service Live operators are available M-F 8:00 am - 5:30 pm Central Time at: 773-889-3087 Automated Technical Assistance available 24 hours a day, seven days a week. E-mail questions to: productinfo@ cobra.com
For Credit Card Orders Call 773-889-3087 [Press one from the main menu] 8:00 a.m. to 5:30 p.m. Central Time, Monday through Friday. Make Check or Money Order Payable To Cobra Electronics, Attn: Accessories Dept., 6500 West Cortland Street, Chicago, IL 60707 U.S.A. To Order Online Please visit our website: www.cobra.com
Cobra on the World Wide Web: Frequently Asked Questions (FAQ) can be found on-line at: www.cobra.com
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
For Sales Information Please Contact
20 FCC ID:BBO3K229LTD
COBRA
ANT
RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd. Wilmington, NC 28411 (800) 507-0482 / (910) 686-4281
21
PA.SP. EXT.SP. + POWER –
MADE IN CHINA
22
A2 29LX_CHR_MANL.indd 47-49
Thank you for purchasing the Cobra 29 LX CHR LE CB Radio. Properly used, this Cobra product will give you many years of reliable service.
23
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
A3
44 5/11/11 3:32 PM
