Transcript
QuickSpecs
HP 10.4” ap5000 LCD Customer Display
Overview
Models HP 10.4" ap5000 LCD Customer Display
1.
AZ191AA
HP 10.4" ap5000 LCD Customer Display is shown attached to the back of the HP ap5000 All-in-One (AiO) Point of Sale (POS) System.
Introduction The HP 10.4" ap5000 LCD Customer Display is a liquid crystal display (LCD) that can be used to display transactional information (pricing, product description, receipt totals, etc.) and customer-facing marketing (promotional messages and images). The customer facing display (CFD) is mounted to the HP ap5000 All-in-One POS System in lieu of the 2-line Vacuum Florescent Display (VFD) (or 2 x 20 Customer Display). The CFD will display full color graphics and video via the on-board VGA port. The display receives power from the VGA port so there is no need for a separate power adapter "brick". User buttons are located on the back of the CFD, recessed and out of sight to the customer. The CFD uses the VFD mounting mechanism. Simple procedures for removing the VFD and installing the CFD are included in the 10.4" Customer Display documentation in the AZ191AA box contents. The CFD does not feature a touch screen.
DA - 13659
North America — Version 1 — May 15, 2010
Page 1
QuickSpecs
HP 10.4” ap5000 LCD Customer Display
Overview
Key Benefits: Enhance customer satisfaction by displaying transactional information (pricing, product description, receipt totals, etc.) during check-out process. Turn your POS system into digital signage by displaying customer-facing marketing information with promotional messages and images. Does not require separate power supply, power is supplied through VGA+Power port (19 Volts) High contrast color TFT LCD display supports resolutions up to 1024 x 768 Advanced User Control Buttons for image quality and AUTO adjustment; adjustable for optimal viewing WARNING: Do not hot plug a monitor into the VGA port of the ap5000. Doing so may damage the monitor. Always power down the ap5000 when removing or attaching a monitor to the VGA port.
Compatibility The 10.4" ap5000 LCD Customer Display is compatible ONLY with the HP ap5000 All-in-One (AiO) Point of Sale (POS) system.
CFD (Customer Facing Display) User buttons The CFD user buttons are located on the back of the CFD, recessed and out of sight to the customer. There are 5 (five) CFD user buttons: ON/OFF: Powers CFD on or off. DOWN/LEFT: Move DOWN or move LEFT inside a menu. UP/RIGHT: Move UP or move RIGHT inside a menu. MENU/EXIT: ENTER into a menu or sub menu screen or EXIT from a menu or submenu screen. RESET/EXIT: Push to automatically adjust the CFD. Push again to EXIT.
Power Supply The 10.4" ap5000 LCD Customer Display does not require a separate power supply adapter. It is powered directly from the HP ap5000's VGA port (VGA+Power). When the display is first installed, 19 Volts is delivered to the VGA port, pins 4 and 11. At POST (Power-On Self-Test), the ID of the display is read via the SMBUS. If the product ID is recognized as the HP ap5000 10.4" LCD Customer Display, then 19 Volts remains on. If the product ID is recognized as something else, then 19 Volts is turned off.
Service and Support 3 years limited warranty with advanced exchange coverage. Optional HP Care Pack Services are extended service contracts which go beyond your standard warranties. For more details visit: http://www.hp.com/go/lookuptool. WARNING: Do not hot plug a monitor into the VGA port of the ap5000. Doing so may damage the monitor. Always power down the ap5000 when removing or attaching a monitor to the VGA port.
DA - 13659
North America — Version 1 — May 15, 2010
Page 2
QuickSpecs
HP 10.4” ap5000 LCD Customer Display
Technical Specifications Electrical Specifications
Dimensions (H x W x D) VGA Cable Length Weight Shipping Weight (with packaging) Power Requirements Power Consumption Temperature
9.65 x 7.28 x 0.95 in (24.5 x 18.5 x 2.42 cm) 23.23 in (590mm) 2.03 lb (0.92 kg) 2.65 lb (1.2kg) 19Volts / 0.378A 7.182W Operating 50° to 104° F (10 to 40° C) Non-operating -20° to 140° F (-30° to 60° C) Operating 20 to 85% Operating 0 to 10,000 ft (3,048 m) Non-operating 0 to 30,000 ft (9,144 m) UL, CSA, FCC Compliance, CE, WEEE
Relative Humidity Altitude (unpressurized) Industry Standard Certifications VGA+PWR Pins Power on VGA port, pins 4 and 11- BIOS enabled Display Area 10.4" diagonal, 211.21mm (W) x 158.4mm (H) Resolution 1024 x 768 Max Color 0.26M Contrast Ratio 500:1 Brightness 300 cd/m2 Pixel Pitch 0.20625mm Viewing Angle 140° horizontally and 120° vertically Response rate 25ms Default Color 6487.8° K Temperature Anti Glare Harness 3H Color Gamut 50% Backlight Unit CCFL For accessibility information on HP products, please visit: http://www.hp.com/accessibility. WARNING: Do not hot plug a monitor into the VGA port of the ap5000. Doing so may damage the monitor. Always power down the ap5000 when removing or attaching a monitor to the VGA port. © 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice and is provided "as is" without warranty of any kind. The warranties for HP products and services are set forth in the express limited warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13659
North America — Version 1 — May 15, 2010
Page 3
