Hp0 045

Transcript

http://www.TwPass.com HP0-045 HP Supporting the ESL E-Series Libraries http://www.twpass.com/twpass.com/exam.aspx?eCode= HP0-045 The HP0-045 practice exam is written and formatted by Certified Senior IT Professionals working in today's prospering companies and data centers all over the world! The HP0-045 Practice Test covers all the exam topics and objectives and will prepare you for success quickly and efficiently. The HP0-045 exam is very challenging, but with our HP0-045 questions and answers practice exam, you can feel confident in obtaining your success on the HP0-045 exam on your FIRST TRY! HP HP0-045 Exam Features - Detailed questions and answers for HP0-045 exam - Try a demo before buying any HP exam - HP0-045 questions and answers, updated regularly - Verified HP0-045 answers by Experts and bear almost 100% accuracy - HP0-045 tested and verified before publishing - HP0-045 exam questions with exhibits - HP0-045 same questions as real exam with multiple choice options Acquiring HP certifications are becoming a huge task in the field of I.T. More over these exams like HP0-045 exam are now continuously updating and accepting this challenge is itself a task. This HP0-045 test is an important part of HP certifications. We have the resources to prepare you for this. The HP0-045 exam is essential and core part of HP certifications and once you clear the exam you will be able to solve the real life problems yourself.Want to take advantage of the Real HP0-045 Test and save time and money while developing your skills to pass your HP HP0-045 Exam? Let us help you climb that ladder of success and pass your HP0-045 now! HP0-045 QUESTION: 1 What is required to access the Advanced Secure Manager features in Command View ESL? A. the appropriate license key B. valid user access permissions C. a special administrator password D. a suitable advanced user account Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=1 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 2 Which component is connected to port E1 of the cluster controller if it is in drive cluster 0? A. cabinet controller B. interface controller C. lower cluster controller D. Interface Manager card Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=2 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 3 What does the OCP display when a library hangs because there are more than one hundred unlabeled tape cartridges in the library? A. Error 22 B. Please wait C. Going on line D. Inventory failure Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=3 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 4 Which tape library component (used to carry data cartridges to a secondary cabinet) is shown on the figure? A. CLM arm B. CLM controller C. picker assembly D. cartridge transfer robot Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=4 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 5 Which scheme is used in the command line interface for drive and slot numbers in ESL ESeries tape libraries? A. 0 based B. 1 based C. 2 based D. Hex based Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=5 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 6 Which port number is required when starting a Command View TL session? A. 2301 B. 4095 C. 4444 D. 5555 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=6 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 7 You are performing a firmware upgrade using Command View TL and a Telnet session terminates it prematurely. What is the most likely outcome? A. The Telnet session is automatically aborted. B. Telnet automatically aborts the other session, but the upgrade continues. C. Command View TL takes precedence and continues the firmware upgrade. D. The firmware upgrade aborts and the device being upgraded may need physical repair. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=7 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 8 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface to? A. tape devices B. library robotics C. management interface card D. e2400-160 Interface Controller Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=8 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 9 Which capabilities of a TCP/IP connection are delivered by the Simple Internet Protocol Plus (SIPP)? A. small packets and ECC B. error handling and retries C. increased bandwidth and performance D. faster command propagation on inexpensive copper interconnect Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=9 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 10 For which connection, other than the cabinet controller, is the I2C network cable used? A. external LANs B. cluster controllers C. interface management cards D. Fibre Channel interface controllers Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=10 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 11 Which tape device attribute does the Interface Manager use to determine the physical location of each tape drive in the library? A. bus number B. SCSI address C. serial number D. drive slot position Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=11 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 12 How often is the Command View TL Health Summary screen updated? A. every 30 seconds B. at 15 minute intervals C. whenever the library status changes D. configurable to any value up to 900 seconds Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=12 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 13 Which ESL E-Series tape library operations require Command View TL? A. Licensing and Interface Manager configuration B. Basic and Advanced Secure Manager configuration C. Licensing and Advanced Secure Manager configuration D. Interface Manager and Advanced Secure Manager configuration Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=13 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 14 Identify the default username and password for the Interface Manager command line interface of an ESL E-Series tape library. A. root, pwd B. cliadmin, clipwd C. admin, password D. administrator, administrator Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=14 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 15 What is connected to the cluster controller card by the drive cluster Ethernet cables of an ESL ESeries tape library? A. cabinet controller B. robotics controller C. local area network D. internal private network Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=15 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 16 Which component does the exhibit display? A. cluster controller B. cabinet controller C. interface manager D. interface controller Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=16 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 17 A. 4 B. 6 C. 9 D. 10 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=17 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 18 When preparing an e2400-FC 4G interface controller for configuration after installation, it must be reset twice. Why must you wait three minutes between resets? A. Internal POST processes must complete. B. The drives need to re-initialize before they are discovered. C. Time must be allowed for the Interface Manager to recognize it. D. Command View only scans for the controllers every two minutes. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=18 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 19 With which management specification does the Command View TL Provider comply? A. Direct Management Initiative (DMI) B. Advanced Remote Management (ARM) C. Simple Network Management Protocol (SNMP) D. Storage Management Initiative Specification (SMI-S) Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=19 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 20 Where is the Interface Manager card located in a SIPP-enabled ESL E-Series Library? A. in the bottom slot in the library card cage B. in a dedicated slot at the bottom of the library C. in the middle slot in the cabinet controller box D. in a slot to the right of the cluster controller in drive cluster 1 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=20 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 21 How many connection(s) to the AC failover box does each drive cluster have in an ESL ESeries tape library? A. 1 B. 2 C. 3 D. 4 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=21 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 22 What can be connected using the vacant Ethernet port on the right side of the cabinet controller? A. an external LAN B. cluster controllers C. interface management card D. Fibre Channel interface controllers Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=22 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 23 Which library configuration is shown in the OCP Library screen? A. last cabinet B. primary cabinet C. secondary cabinet D. standalone cabinet Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=23 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 24 How many outgoing AC connections are there (for internal connections) on the AC failover box of an ESL E-Series tape library? A. 4 B. 6 C. 8 D. 10 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=24 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 25 What does Number 2 on the exhibit represent? A. x axis motor B. y axis motor C. optical scanner D. home position sensor Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=25 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 26 When is Lock Element Addressing used in the ESL E-Series library? A. with multiple tape drive clusters B. as an electronic lock of the access doors C. when multiple interface controllers are used D. for cross linked libraries with three or more cabinets Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=26 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 27 What is reported by the LP/PNL sensor of an ESL E-Series tape library? A. library door status B. x-axis motor position C. y-axis motor position D. magazines and load ports status Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=27 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 28 What is Oversubscription in a SAN environment? A. overlapping zoning configuration B. too many ISLs between two Fibre Channel switches C. two Fibre Channel switches connected through four inter-switch links (ISLs) and the ISLs configured for ISL trunking D. two Fibre Channel switches connected through one ISL, all host systems connected to the first switch, and the library connected to the second switch Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=28 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 29 In an ESL E-Series library, what is the recommended maximum number of drives for a 2Gb Fibre Channel link? A. 2 SDLT 320 B. 8 SDLT 220 C. 4 Ultrium 230 D. 1 Ultrium 460 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=29 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 30 When evaluating performance on a library, which Library & Tape Tools test measures WRITE and READ performance of a server to a tape drive directly from memory independent of disk? A. HPTapePerf B. HPCreateData C. Data read/write test D. tape I/O Performance monitor Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=30 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 31 What is the purpose of the Stop button? A. Halt the robotics. B. Restart the library. C. Shutdown the library. D. Pause a running backup process. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=31 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 32 An ESL E-Series library has recently been upgraded with Ultrium 960 drives. The drives randomly set as off-line. What is the most probable cause? A. Cluster to drivers cable configuration is incorrect. B. Ultrium 960 drives are incompatible with this library. C. Drive firmware is incompatible with the robotic firmware. D. Ultrium 960 drives are incompatible with the cluster controller firmware. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=32 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 33 For which connector is the top plug on the AC failover box reserved? A. card cage power B. tape drive cluster 0 C. cross link mechanism D. cabinet controller assembly Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=33 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 34 How can you resolve an oversubscription in a cascaded fabric with two switches and one interswitch link? (Select two.) A. Distribute the hosts across the two switches. B. Modify the Core switch PID format value to 1. C. Increase the number of switches within the fabric. D. Increase the number of inter-switch links between the switches. E. Increase the number of tape drives connected to the tape library. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=34 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 35 A customer wants to get the OCP password reset. Which information must be supplied to HP Support? A. library serial number B. date and time from the OCP C. Interface Manager serial number D. management server IP address and internet access account Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=35 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 36 When powering up an ESL E-Series tape library containing Ultrium tape drives with tapes loaded, the drives are no longer discovered by the Interface Manager at boot time. What is causing the error and how can you solve it? A. Stopped drives which contain tapes become unusable. Replace with new drives. B. Drives are locked and controlled by the backup software. Reboot the backup server and then reboot the library. C. Drives with tapes loaded are unable to initialize. Remove drives from the library. Remove drives from the drive housings. Perform a manual tape removal and replace the drives. D. Drives do not join the SCSI bus until tape recovery has finished. Reboot the Interface Controller and wait three minutes to confirm device status. Verify latest firmware installed. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=36 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 37 The Interface Manager card of an ESL E-Series tape library fails. The status LEDs display red flashing twice every five seconds and green off. What does this indicate? A. BIOS code failed to run. B. No valid firmware image found. C. Load or execute command failed. D. No CompactFlash card or valid boot sector found. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=37 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 38 You need to replace an Interface Manager card due to a BIOS failure. What must you do to ensure the configuration is retained? A. Transfer the memory module from the old card to the new one. B. Backup and restore the configuration using Command View ESL. C. Backup and restore the configuration using the Command Line Interface. D. Configure the new card s Ethernet address to the same as the old one. Mapping will be done automatically. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=38 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 39 The Power Off LED is illuminated on the robotics and no procedures involving robotics movement can be performed. What is the most likely cause? A. The Stop button was pressed. B. The 55 V robotics power supply is faulty. C. The motors are powered off because the load port sensor detected a wedged cartridge. D. The robotics motors are disabled because one of the front doors on the ESL-E Series library is open. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=39 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 40 Cluster 3 of an ESL630E tape library has a defective power supply. What must you do to replace it? A. Take the cluster offline and replace the defective power supply. B. Keep the cluster online and replace the defective power supply. C. Leave the defective power supply in the cluster until the next planned maintenance. D. Take the cluster offline, remove power from the cluster, replace the defective power supply and reapply power to the cluster. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=40 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 41 You correctly configured an ESL E-Series tape library using Command View TL and accepted the default Secure Manager settings. What is the result? A. Hosts have no access to the library. B. You are prompted to enter host information. C. All hosts in the subnet can communicate with the library. D. Only hosts running HP-UX can communicate with the library. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=41 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 42 After hot plugging a drive in an ESL-E series library, the entire drive cluster was reset. What must be done to bring the drives and the e2400-160 back online? A. Re-seat the drive. B. Power-cycle the entire drive cluster. C. Ensure that the configured number of drives in the OCP Setup menu equals the number of drives installed. D. Manually turn on each drive in the cluster from the OCP. Reset the e2400-160 that was attached to the drives in that cluster. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=42 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 43 A SCSI tape device in an ESL630e tape library cannot be managed through Command View TL. What is the most probable cause? A. SCSI bus type B. Hosts are not on line. C. loose SCSI cable connections D. Fibre Channel mapping is not configured. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=43 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 44 What are possible causes of library inventory failure? (Select two.) A. The library has a drive failure. B. One of the clusters is disconnected. C. The front of library is facing bright sunlight. D. Unapproved barcode labels are being used. E. The interface controller is disconnected from the Fibre Channel switch. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=44 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 45 In an ESL E-Series library, what is the recommended maximum number of drives for a 1Gb Fibre Channel link? A. 2 SDLT 220 B. 8 SDLT 320 C. 4 Ultrium 230 D. 1 Ultrium 460 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=45 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 46 What HP document should you refer to when evaluating performance of an ESL E-Series tape library and its environment? A. EBS Design Guide B. ESL E-Series User Guide C. Library & Tape Tools User Guide D. Tape and Library Performance Guide Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=46 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 47 What is the average swap time for cartridges in a single frame ESL-E Series library? A. 2 to 5 seconds B. 18 to 20 seconds C. 60 to 120 seconds D. The time is unpredictable. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=47 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 48 How long does it take to do a complete inventory on a fully loaded, single frame ESL-E Series library with labeled medias? A. less than 2 minutes B. less than 3 minutes C. less than 5 minutes D. less than 6 minutes Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=48 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 49 When creating an ESL E-Series design, what do you use to determine a customer s data storage requirement? A. SAN Sizing Tool B. EBS Sizing Tool C. Library & Tape Tools D. EBS Compatibility Matrix Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=49 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 50 What is the maximum number of drives that can be installed in a four-frame ESL E-Series library? A. 40 B. 44 C. 60 D. 64 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=50 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 51 When planning an ESL E-Series tape library installation, what is the most important information needed to ensure that data transfer can be achieved? A. SCSI type B. IP infrastructure C. switch manufacturer D. Fibre Channel speed Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=51 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 52 What is the correct minimum firmware revision for Ultrium 460 Fibre Channel drives in an ESL ESeries library? A. K4B0 B. K24W C. F59W D. L26W Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=52 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 53 To validate an ESL E-Series tape library configuration, you check the manual and the automatic settings. To what do the automatic settings apply? A. date and time B. Secure Manager C. library information D. Interface Controller Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=53 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 54 What is the minimum version of IBM Tivoli Storage Manager required to support ESL ESeries library operations? A. 5.1 B. 5.2 C. 5.3 D. 5.4 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=54 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 55 What must be configured in CommandView TL when manually adding a library? A. library serial number B. Interface Manager IP address C. tape drive and robot SCSI IDs D. Interface Manager username and password Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=55 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 56 Which information about the Interface Manager running firmware 1.7 or later is stored in the memory of each library interface controller to form an association between them for management purposes? A. IP address B. MAC Address C. Domain name D. World Wide Name Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=56 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 57 What must the configuration contain when partitioning a library with Advanced Secure Manager? A. at least one drive and one slot B. two drives, 30 slots and a mailslot C. one fully populated drive cluster and 30 slots D. one interface controller and one fully populated cluster Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=57 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 58 In a single cabinet ESL322e tape library, how many licenses are required to enable all slot panels? A. 2 B. 3 C. 4 D. 5 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=58 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 59 What happens if you try to select and manage a library being managed by another management tation? A. The other management station will fail. B. The library will hang and any running backup jobs will fail. C. The management station will corrupt the device mapping. D. A dialog box displays asking if you want to reclaim the library. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=59 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 60 What must be enabled on the Interface Manager to allow the replacement of failed interface controllers without the need to reconfigure the library mapping and partitioning? A. Auto Rediscover B. WWN Retention C. Retain Configuration D. Auto Configuration backup and restore Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=60 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 61 What happens if the device firmware update process is interrupted? A. It will restart after the device is rebooted. B. The device will return to the older firmware version. C. The device can become inoperable and require physical repair. D. It will continue when the firmware update program is restarted. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=61 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 62 If Command View TL is not available, what can be used to access the log files in the Interface Manager card? A. Telnet B. Perl scripts C. anonymous FTP D. a serial connection Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=62 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 63 What is important to remember when changing from Manual to Automatic mode of the Interface Manager? A. All drives must be taken offline. B. Fibre Channel cables must be unplugged. C. Interface controllers must be powered off first. D. Any customizations created in Manual mode will be lost. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=63 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 64 How can you test the communication between the management station and any selected Interface Manager card in an ESL E-Series library from Command View TL? A. Run the checkIM command in the CL I. B. Select Support Tab > Tools > Open the Interface Manager Check dialog box. C. Select Actions > Connectivity Check to open the Connectivity Check dialog box. D. Select Support Tab > Communication Check to open the Communication Check dialog box. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=64 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 65 Which screen in Command View ESL shows the number of full mail slots in use? A. Inventory B. Health Summary C. Slot Configuration D. Component Status Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-045&qno=65 ------------------------------------------------------------------------------------------------------------------------------------- TwPass Certification Exam Features; - TwPass offers over 2500 Certification exams for professionals. More than 98,800 Satisfied Customers Worldwide. Average 99.8% Success Rate. Over 120 Global Certification Vendors Covered. Services of Professional & Certified Experts available via support. Free 90 days updates to match real exam scenarios. Instant Download Access! No Setup required. Price as low as $19, which is 80% more cost effective than others. Verified answers researched by industry experts. Study Material updated on regular basis. Questions / Answers are downloadable in PDF format. Mobile Device Supported (Android, iPhone, iPod, iPad) No authorization code required to open exam. Portable anywhere. Guaranteed Success. Fast, helpful support 24x7. View list of All Exams (AE); http://www.twpass.com/twpass.com/vendors.aspx Download Any Certication Exam DEMO. http://www.twpass.com/twpass.com/vendors.aspx To purchase Full version of exam click below; http://www.TwPass.com/