Hp0 238

Transcript

http://www.TwPass.com HP0-238 HP Supporting the MSA1000 and SCSI JBODS http://www.twpass.com/twpass.com/exam.aspx?eCode= HP0-238 The HP0-238 practice exam is written and formatted by Certified Senior IT Professionals working in today's prospering companies and data centers all over the world! The HP0-238 Practice Test covers all the exam topics and objectives and will prepare you for success quickly and efficiently. The HP0-238 exam is very challenging, but with our HP0-238 questions and answers practice exam, you can feel confident in obtaining your success on the HP0-238 exam on your FIRST TRY! HP HP0-238 Exam Features - Detailed questions and answers for HP0-238 exam - Try a demo before buying any HP exam - HP0-238 questions and answers, updated regularly - Verified HP0-238 answers by Experts and bear almost 100% accuracy - HP0-238 tested and verified before publishing - HP0-238 exam questions with exhibits - HP0-238 same questions as real exam with multiple choice options Acquiring HP certifications are becoming a huge task in the field of I.T. More over these exams like HP0-238 exam are now continuously updating and accepting this challenge is itself a task. This HP0-238 test is an important part of HP certifications. We have the resources to prepare you for this. The HP0-238 exam is essential and core part of HP certifications and once you clear the exam you will be able to solve the real life problems yourself.Want to take advantage of the Real HP0-238 Test and save time and money while developing your skills to pass your HP HP0-238 Exam? Let us help you climb that ladder of success and pass your HP0-238 now! HP0-238 QUESTION: 1 Which LED on the MSA1000 controller indicates a failure on a configured hard disk? A - LED 9 B - LED 15 C - LED 16 D - LED 17 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=1 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 2 The MSA1000 controller display module can hold up to 100 messages. Once the maximum is reached, the older messages will be___. A - copied to the connected host using ACU-XE B copied to the connected host using the serial line C - deleted D - copied to the connected metadata part of the disks Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=2 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 3 The customer has a single controller MSA1000 configuration. What is the recommended action to replace the failed controller? A - Power down the MSA1000. Remove the tailed controller and install the old cache module in the replacement controller. B - Push the right arrow push button on the front panel to clear the cache of the controller and replace the failed controller. C - Replace the failed controller online, with a new cache installed. D - Push the left arrow push button on the front panel to clear the cache of the controller and replace the failed controller. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=3 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 4 What is the recommended action to take when a controller fails in a redundant MSA1000 configuration? A - Power off the MSA1000 and replace the failed controller. B - Replace the failed controller online. C - Push the right arrow push button on the front panel to failover the controller and replace the failed controller. D - Modify the zoning so that the MSA1000 is not accessible during the online replacement of the failed controller. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=4 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 5 The EMU in a MSA1000 has detected a temperature problem. Which LED of the enclosure status indicators reports the problem and how does the LED display the error condition? A LED 1 is off. B - LED 2 is amber. C - LED 3 is off. D - LED 3 is amber. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=5 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 6 Which LED on the MSA1000 controller indicates an error message was sent to the controller display? A - LED 9 B - LED 15 C - LED 16 D - LED 17 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=6 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 7 You are assigning DISK109 as a spare drive to array 8 containing logical drives 2 and 3. What is the correct CLI (command line interface) command? A - ADD SPARE UNIT=2 DISK109 B - ADD SPARE ARRAY B DISK109 C - SET SPARE ARRAY B DISK109 D - SET SPARE UNIT 3 DISK109 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=7 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 8 On an MSA1000 disk, LED5 1 and 2 are OFF, and LED 3 is ON. What is the possible cause for the status and which action should you take? A - The drive is part of the selection of the array configuration utility. Do not remove this drive without verifying the configuration. B The array is rebuilding. Do not remove this drive without verifying the configuration. C - The array is performing an online expansion. Do not remove this drive without verifying the configuration. D - The drive failed and has been taken offline. You can remove the drive. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=8 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 9 You are replacing a defective power supply in a redundant MSA1000 configuration. Which statement is correct? A - Remove the power supply. Note the part number of the unit and order the replacement part. Install the replacement part when it arrives. B - Power off the MSA1000 during replacement to reduce the risk of personal injury. C - Replace both power supplies at the same time because they contain the cache battery assembly. D - Removing a power supply significantly changes the airflow in the cabinet. The remaining power supply will shutdown the array after 5 minutes. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=9 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 10 The customer has a redundant MSA1000 configuration. Identify the correct statement about replacing an array accelerator (cache) module. A - The array accelerator modules in both controllers must be the same size. B - The array accelerator module can be replaced by a larger one. The extra space will not be used. C - The array accelerator module can be replaced by a smaller one. The cache will be switched off. D - If you have only different size modules available, you must power off the array during replacement. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=10 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 11 Which statement about blanking panels is correct? A - The drive blanking panels are not necessary and can be removed. B - The interconnect blanking panel is not necessary and can be removed. C - One drive blanking panel at a time can be removed. D - Install blanking panels in every empty slot to avoid thermal failures. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=11 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 12 How does LED number 2 appear when power is supplied to the MSA1000 and the power switch in the front is switched to on? A - Flashing green B - Green C - Off D - Amber Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=12 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 13 What are the correct statements about Fibre Channel cable routing or handling? Select THREE. A - You must firmly attach the cables to the cabinet with cable ties. B - Route cables at a 90 degree angle with a bending radius less than 2.5 cm/1 inch. C - Never bend the cables with a bending radius less than 7.62 cm/3 inch. D - When removing a cable from a transceiver, pull on the cable, not on the connector. E - If you must use cable ties, do not tighten them completely around Fibre Channel cables. F - Excess Fibre Channel cables should be coiled and tied loosely. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=13 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 14 On an MSA1000 disk, all LEDs are OFF. What are possible causes for the status and which actions should you take? Select TWO. A - The array is rebuilding. Do not remove this drive without verifying the configuration. B - The array is performing an online expansion. Do not remove this drive without verifying the configuration. C - The drive is not configured as part of an array. You can remove the drive. D - The drive is part of the selection of the array configuration utility. Do not remove this drive without verifying the configuration. E - The drive is configured as a hot spare. If needed, you can remove the drive. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=14 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 15 Which LED indicates the MSA1000 controller is active or passive? A - LED 9 B - LED 15 C LED 16 D - LED 17 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=15 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 16 You have a configuration with 3 virtual disks configured in one array. One virtual disk is RAID 0, one is RAID 5 and one is ADG. Identify the correct statements if one hard drive has failed and you remove a wrong (running) drive from this array. Select TWO. A - ADG is still online. B - ADG has data loss when you remove the wrong drive. C - RAID 5 is still online. D - RAID 5 has data loss when you remove the wrong drive. E - RAID 5 has data loss after first drive failure. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=16 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 17 The customer has a redundant MSA1000 configuration in a Windows 2000 environment. Identify the recommended procedure to replace the array accelerator (cache) module from the active controller. A - The module can be replaced at any time because it is a hot-swappable component. B - The replacement can only be done on the passive controller. To do the failover, you must remove the active controller. C - The replacement can only be done on the passive controller. To do the failover, you must failover all LUNs using the Secure Path GUI. D - The replacement can only be done on the passive controller. To do the replacement, you must power off the MSA1000. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=17 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 18 Which actions must you take to replace a failed hard drive? Select TWO. A - Examine the EMU status to determine if it is overheating. B - Examine the front panel LEDs to verify there is no ongoing I/O from the host. C - Examine the drive LED indicators to identify the failed drive and any ongoing background operation. D - Examine the power supply LED to determine if there is an airflow problem. E - Examine the front panel display to identify the failed drive and any ongoing background operation. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=18 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 19 You are replacing a defective blower in a redundant MSA1000 configuration. Which statement is correct? A - Although removing a blower does not change the airflow within the enclosure, do not remove the blower until the replacement part is available. B - Power off the MSA1000 during replacement to reduce the risk of personal injury. C - Replace both blowers at the same time because when one blower is defective, the other may fail soon. D - Removing a blower significantly changes the airflow in the cabinet. The power supply will shutdown the array after 5 minutes. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=19 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 20 Which CLI (command line interface) command can be used to list the current ACL (access control list)? A - SHOW CONNECTIONS /ACTIVE B - SHOW CONNECTIONS C - SHOW ACL D - ADD ACL Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=20 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 21 You have a failed drive in a redundant MSA1000 configuration. The array has an online spare drive and the rebuild is running. What is the recommended procedure for replacing the failed hard drive? A - The rebuild has no influence; replace the online spare during the rebuild. B The rebuild has no influence; replace the failed drive during the rebuild. C - Replace the failed drive during the rebuild only if the drive fault indicator is on. D - Never replace a drive when a rebuild is running in the background; replace the failed drive after the rebuild is complete. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=21 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 22 The customer has a redundant MSA1000 configuration in a Windows 2000 environment. What is the recommended procedure to replace the active MSA1000 controller? A - Only a passive controller can be replaced. The active controller cannot be replaced. B - Only a passive controller can be replaced. To do the failover, you must remove the active controller. C - Only a passive controller should be replaced. To do the failover, you must failover all LUNs using the Secure Path GUI. D - Only a passive controller should be replaced. To do the replacement, you must power off the MSA1000. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=22 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 23 The EMU of an MSA1000 is not operating normally. Which LED of the enclosure status indicators reports the problem and how does the LED display the error condition? A - LED 1 is off or solid. B - LED 1 is flashing green. C - LED2 is off. D - LED2 is amber. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=23 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 24 What happens if a blower assembly fails? A - The LED on the failing fan is off and the fan of the other power supply operates at higher speed. B - The LED on the power supply with the failing fan is off and the fan of the other power supply operates at normal speed. C - The LED on the power supply with the failing fan is amber and the fan of the other power supply operates at higher speed. D - The LED on the power supply with the failing fan is off and the fan of the other power supply operates at higher speed. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=24 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 25 What are indicators of a temperature problem within the MSA1000 enclosure? Select TWO. A - An error message is displayed in the front panel. B - The enclosure status indicators are flashing. C - The internal alarm activates. D - The enclosure status indicator fault LED is illuminated. E - The integrated EMU LED is illuminated. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=25 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 26 Which precautions must you take before replacing a non-hot-pluggable part of an MSA100? Select TWO. A - Take appropriate Electrostatic Discharge (ESD) precautions. B - Disable the SSP settings over ACU-XE. C - Modify the zoning so that the MSA1000 is not accessible. D Power off an external Fibre Channel switch if there is a Fibre Channel connection. E Disconnect all AC power cords from the MSA1000. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=26 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 27 Identify the correct statement about removing a hard drive from a RAID 0 configuration. A Replacing a hard drive is allowed if the drive has failed. User data is still available if there is a spare drive assigned to the array. B - Replacing a hard drive is allowed if the drive has failed. User data is lost. You have to do a restore from a valid backup. C - Replacing a hard drive is allowed for an online drive. User data is still available if there is a spare drive assigned to the array. D - Replacing a failed hard drive from a RAID 0 must be done while the MSA1000 is powered off. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=27 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 28 You have a redundant MSA1000 installation running Windows 2000. You moved the Secure Path manager software to a different client and updated the Secure Path agent configuration on the host which accesses the MSA1000. No information is displayed in the Secure Path manager window. What may be the causes? Select TWO. A - The Secure Path agent service must be restarted to update the configuration changes. B - It is not possible to change the Secure Path manager host. C - The MSA1000 must be restarted to reflect the changes. D - The management host cannot resolve the network name of the agent host. E - Zoning may be preventing the Secure Path manager from accessing the agent. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=28 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 29 You have a redundant MSA1000 configuration with host ABC accessing logical drives on the MSA1000. You install a second host XYZ to access logical drives. Both hosts run Windows 2000. Why are you unable to access the MSA1000 from Host XYZ? Select TWO. A - SSP (Selective Storage Presentation) is enabled, but not configured for host XYZ. B - SSP (Selective Storage Presentation) is disabled and not configured for host XYZ. C - Zoning is enabled on the switches, but not configured for host XYZ. D - Zoning is enabled on the switches, but not configured for host ABC. E - Secure Path is installed on host XYZ which prevents the host from accessing any logical drive. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=29 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 30 In a redundant MSA1000 configuration, what is the recommended action if a controller fails during an expansion process? A - Power off the MSA1000 and replace the failed controller. B Replace the failed controller online. C - Push the right arrow push button on the front panel to failover the controller and replace the failed controller. D - Remove the failed controller and install the old cache module in the replacement controller. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=30 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 31 What is an advantage of having an online spare drive under RAID 5 or ADG? A - You can use this disk for storing data as long as you do not have a disk failure. B - A second disk failure, immediately after the first disk has failed, will not result in data loss. C - You get better write performance with an online spare compared to a RAID 5 or ADG without an online spare. D It provides automatic recovery from a disk failure. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=31 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 32 An SFP (Small Form Factor Pluggable) is the ____ A - transceiver type used with 2 Gb Fibre Channel B - GLM (Gigabit Link Module) used with 2 Gb Fibre Channel C - transceiver type used only with 1 Gb Fibre Channel D - GBIC (Gigabit Interface Converter) used with 1 Gb Fibre Channel Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=32 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 33 Which RAID level does NOT use online spares? A - RAID 0 B - RAID 0+1 C - RAID 5 D ADG Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=33 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 34 How many devices does Fibre Channel Arbitrated Loop support? A - 2 B - up to 126 C - up to 127 D - up to 16 million Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=34 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 35 Identify the correct Ultra 2 SCSI, Ultra 3 SCSI and Ultra 320 SCSI clock rates. A - Ultra 2 has 40 MHz, Ultra 3 has 80 MHz and Ultra 320 has 160 MHz. B - Ultra 2 has 40 MHz, Ultra 3 has 40 MHz and Ultra 320 has 80 MHz. C - Ultra 2 has 80 MHz, Ultra 3 has 160 MHz and Ultra 320 has 320 MHz. D - Ultra 2 has 40 MHz, Ultra 3 has 80 MHz and Ultra 320 has 80 MHz. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=35 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 36 A Wide Ultra 3 SCSI bus has 16 possible SCSI IDs and a bandwidth of up to ____. A - 20 MB/s with an SE or LVD interface B - 40 MB/s with an SE or HVD interface C - 80 MB/s with an SE or LVD interface D - 160 MB/s with an LVD interface Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=36 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 37 Which connector is used for an LVD (low voltage differential) SCSI bus? A - 50 pin Centronics B - 50 pin HD (high density) C - 40 pin ATA (advanced technology attachment) D 68 pin VHDCI (very high density cable interconnect) Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=37 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 38 RAID ADG_____ SELECT THREE. A - distributes two different parities onto every available disk in the array B - provides the fastest write performance of all RAID levels C - has moderate costs per GB because it uses only one disk for parity per array D - is recommended for environments that require the best fault tolerance E - has moderate costs per GB because it uses the capacity of two disks for parity per array F - stores the parity onto one physical disk in the array Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=38 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 39 Which Fibre Channel cable do you use to connect a 2 Gb HBA (host bus adapter) to a 2Gb Fibre Channel switch? A - SC (Subscriber Connector) on both sides and multimode cable B LC (Lucent Connector) on both sides and single mode cable C - LC (Lucent Connector) on both sides and multimode cable D - SC (Subscriber Connector) on both sides and single mode cable Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=39 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 40 Which SCSI ID has the highest priority on a SCSI bus? A - 0 B - 7 C - 8 D - 15 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=40 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 41 You are configuring a SCSI bus with an HBA (host bus adapter), a disk and a tape device. What is the recommended SCSI ID setup? A - HBA should have SCSI ID 7, the disk SCSI ID 5 and the tape SCSI ID 0. B - HBA should have SCSI ID 7, the disk SCSI ID 0 and the tape SCSI ID 5. C - HBA should have SCSI ID 0, the disk SCSI ID 5 and the tape SCSI ID 1. D HBA should have SCSI ID 0, the disk SCSI ID 1 and the tape SCSI ID 5. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=41 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 42 RAID is a RAID level which ____ Select TWO. A - uses only one physical disk in the array for parity B - distributes the parity onto every available disk in the array C - distributes two different parities onto every available disk in the array D - has moderate costs per GB because it uses the capacity of one disk for parity per array usually has the highest cost per GB of usable space because it duplicates the data Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=42 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 43 Read Ahead cache is a caching mechanism where ____ A - the data read from the disks stays in cache until it reaches a threshold B - the RAID controller reads more data than requested from the disks, predicting the next read from the host needs this additional data C - every I/O goes directly to the respective disk D - every I/O goes into the RAID controller cache and in a background operation to the respective disk Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=43 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 44 Which Fibre Channel cable do you use to connect a 2 Gb HBA (host bus adapter) to a 1 Gb Fibre Channel switch? A - SC (Subscriber Connector) on both sides and multimode cable B LC (Lucent Connector) on both sides and multimode cable C - SC (Subscriber Connector) to the HBA, LC (Lucent Connector) to the switch and single mode cable D - SC (Subscriber Connector) to the switch, LC (Lucent Connector) to the HBA and multimode cable Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=44 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 45 RAID Level 0 ____. Select TWO. A - usually has the highest cost per GB of usable space because it duplicates the data B - usually has the lowest cost per GB of usable space C - is used primarily in environments requiring fault tolerance and best performance D - has moderate costs per GB because it uses only one disk for parity per array E - does not provide fault tolerance Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=45 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 46 What happens when you connect an HVD (high voltage differential) host bus adapter to an LVD (low voltage differential) disk device? A - The devices function correctly after setting up the compatibility mode in the HBA (host bus adapter). B - The devices do not function together unless you use active termination. C - The devices function correctly if you set up unique SCSI IDs and there is proper termination. D - The devices do not function and you may damage the devices. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=46 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 47 SCA (single connector attachment) is a _____ A - 68 pin connector used for connecting Fibre Channel RAID arrays B - 80 pin connector used for connecting Fibre Channel RAID arrays C 80 pin connector with integrated SCSI (data status and ID select) lines, used for connecting SCSI devices in a Storage Works 4300 family enclosure D - 68 pin connector used for connecting SCSI devices in a Storage Works 4300 family enclosure Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=47 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 48 Which actions are recommended to avoid functional problems when configuring or installing a SCSI bus? Select TWO. A - Fasten the connectors with the screws provided on the connectors. B - Use the longest cables available to connect the devices. C - Terminate every SCSI device. D - Use passive termination for LVD SCSI. E - Visually inspect the connectors for damaged pins. F - Use the same SCSI ID for identical device types. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=48 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 49 SCSI LUNs (logical unit numbers) are _____ A - dependent on the signaling type of the bus B - always virtual devices used for administration C - not used to address devices when performing a SCSI I/O over a Fibre Channel fabric D - used for addressing logical devices behind a SCSI ID Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=49 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 50 A Wide Ultra SCSI bus has 16 possible SCSI IDs and a bandwidth of up to _______ A - 20 MB/s with an SE or LVD interface B - 40 MB/s with an SE or HVD interface C - 60 MB/s with an SE or LVD interface D - 160 MB/s with an LVD interface Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=50 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 51 Which operating system drivers are NOT contained on the MSA1000 Software Support CD? Select TWO. A - Tru64 Unix B - Novell C - Linux D - OpenVMS E - Windows Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=51 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 52 One power supply in an MSA1000 assembly failed and has been removed. What happens? A Nothing. B - The remaining power supply substitutes the missing power supply. C - The remaining power supply substitutes the missing power supply and initiates a shutdown in approximately 5 minutes. D - The fault LED flashes and the MSA1000 stops operating. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=52 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 53 In an MSA1000 environment, Storage Works Secure Path is necessary for _____ A - data encryption B - password protection C - multi-path support D - remote replication Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=53 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 54 Which command must be issued before performing a firmware update to the MSA1000 Fabric Switch 2/6 through the CLI? A - switch stop B - stop switch C - disable switch D - switch disable Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=54 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 55 Which service must be running to backup or restore the configuration files on the MSA1000 Fabric Switch 2/B? A - FTP or RSHD B - FTP or SNMP C - RPC or FTP D - RSHD or SNMP Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=55 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 56 The MSA1000 SAN Switch 6 Management Utility can be accessed though the____ A MSA1000 CLI (command line interface) B - web browser C - menu driven user interface D hyper term session Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=56 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 57 On an MSA1000 hard disk drive, the top LED is illuminated, the middle LED is flashing and the bottom LED is off. The disk drive ____ A - is spinning up during POST B - is going offline C - is a replacement drive and is being rebuilt D - has fault Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=57 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 58 The correct default username and password when logging into a MSA SAN Switch 6 is __ A Administrator, Administrator B - User, Admin C - user, ADMIN D - admin, password Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=58 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 59 The correct default username and password when logging into a MSA1000 SAN Switch 2/8 is ____ A - Administrator, Administrator B - User, Admin C - user, ADMIN D - admin, password Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=59 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 60 One disk fails in a redundant MSA1000 configuration. Which action is required? A - Turn off the MSA1000 and replace the tailed disk. B - Shut down the accessing servers, turn off the MSA1000, and replace the tailed disk. C - Shutdown servers, keep the MSA1000 running and replace the failed disk. D - Keep the servers and the MSA1000 running and replace the tailed disk if it is part of a RAID 15, or ADG configuration. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=60 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 61 Identify the MSA1000 Redundancy Active indicator by clicking the number that specifies its location. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=61 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 62 In a fully operational MSA1000 with two redundant controllers, one controller fails. The replacement controller has a newer firmware version. What happens when the new controller is hot plugged? A - The MSA1000 compares the firmware versions on both controllers and the most recent one is used. B - The old firmware remains operational. The replacement controller is automatically downgraded to the old firmware. C - The old firmware remains operational and the MSA1000 is in a non-redundant configuration. D - The MSA1000 recognizes that there are different firmware versions, displays an error message and stops operation. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=62 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 63 This item is a Drag and Drop response item. Click the Exhibit button for instructions on completing Drag and Drop items. Click the Task button. You are adding an additional split bus M4354 storage enclosure to an MSA1 000. Match the SCSI busses to the enclosure by dragging and dropping the boxes. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=63 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 64 A customer wants to fit three two-node clusters with the MSA1000, two Windows 2000 clusters and one Novell Netware cluster. How many MSA1000s are required at a minimum? A -1B-2C-3D-4 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=64 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 65 One physical drive is not yet configured in an MSA1000 and needs to be configured as a spare disk. Which statement is correct? A - This disk may not be configured into an array. B - A spare disk must be assigned to a logical drive. C - A spare disk can be shared among several arrays. D - Any free space on any disk can be used as spare. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=65 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 66 All indicators on an MSA1000 hard disk drive are flashing. The drives are ____ A - accessed by the ACU B - being tested by the Insight Manager C - going offline D - spinning up during POST Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=66 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 67 Which CLI command do you use to determine the total amount of physical drives? A - VIEW DISKS B - SHOW DISKS C - VIEW UNITS D - SHOW UNITS Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=67 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 68 The lower green LED to the left of the text display window, if ON, indicates that the MSA1000 is ____ A - powered on B - powered on and the single controller is in operational mode C powered on, two controllers are installed, and transparent failover mode is enabled D - powered on and two controllers are installed Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=68 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 69 The text display window of the MSA1000 displays error, informational, or user input messages. When a new message is displayed, the previous one is ____ A - erased B - written to a log file C - kept in the buffer for a given period of time D - kept in the buffer which holds up to 100 messages Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=69 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 70 The MSA1000 is configured by ____ A - Smart Start B - Task smart C - Array Configuration Utility D - Array Management Utility Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=70 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 71 How many logical drives are supported by the MSA1000? A - 28 B - 32 C - 38 D - 44 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=71 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 72 An MSA1000 controller fails before cached data is written to the disks. What happens to the data? A - The data will be lost. B - After the failed controller has been replaced, the data must be flushed manually. C - After the failed controller has been replaced, the data is flushed automatically. D - The data remains intact due to the battery backed cache. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=72 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 73 In a fully operational MSA1000 with two redundant controllers, one controller fails. The replacement controller has a newer firmware version. What happens when the MSA1000 is powered off while the new controller is inserted and then powered on? A - The MSA1000 compares the firmware on both controllers and uses the most recent version. B - The old firmware remains operational. The replacement controller with the new firmware must be downgraded manually. C - The old firmware remains operational and will also be used on the new controller. D - The MSA1000 recognizes that there are different firmware versions, displays an error message and stops operation. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=73 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 74 You access the MSA1000 command line interface (CLI) through a ____ A - serial connection from the server host computer only B - serial connection from a terminal or through a terminal emulator connected to the serial port on the MSA1000 controller C - telnet session from the server host computer only D - telnet session from any computer Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=74 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 75 How many hops are supported for cascading MSA1000s with the MSA1000 Fabric Switch 6? A-0B-1C-2D-3 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=75 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 76 Which MSA1000 component firmware CANNOT be updated with the MSAFIash utility? A MSA 1000 EMU B - MSA 1000 controller C - MSA SAN Switch 6 D - MSA SAN Switch 2/8 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=76 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 77 A customer wants to introduce an MSA1000 into an existing SAN with B-series (Brocade) switches. The MSA1000 can be connected to the SAN through A - MSA Hub 2/3 B - MSA Fabric Switch 6 C - MSA Fabric Switch 2/8 D - Gigabit Ethernet Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=77 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 78 Secure Path must be installed on the host to allow the MSA1000 logical units to _____ A create snapshots for data security purposes B - failover to the standby controller path C - be configured as dynamic disks D - be presented to the host Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=78 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 79 You install a new MSA1000 controller. The batteries of the array accelerator could be discharged. What do you do next? A - Proceed with installation and configuration. B - Power on the controller and check the controller display panel for the message that the array accelerator is temporarily disabled. C - Wait. The MSA1000 will send an error message and stop operation. D - Begin charging the array controller batteries. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=79 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 80 Using the MSA1000 Software Support CD, which installation options do you have? Select TWO. A - Windows drivers B - Secure Path C - MSA FIash utility D - new firmware E - ACUXE Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=80 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 81 What happens when the MSA1000 firmware is corrupted? A - The power-up procedure fails. B - An error message is displayed and the MSA1000 shuts down. C - An error message is displayed and the MSA1000 waits for user intervention. D - A valid firmware image is copied from the Recovery ROM on top of the corrupted image. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=81 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 82 You handled an error which was indicated by a message on the MSA1000 text display window. How do you delete the message? A - You cannot delete the message. B - Press the left and right push buttons at the same time. C - Issue the DEL MSG command to delete the currently displayed message. D - Issue the DEL MSG command to clear the complete message butler. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=82 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 83 Which tools do you use to update firmware on the MSA1000? Select TWO. A - Command line interface (CLI) B - Array Configuration Utility (ACU) C - Insight Manager 7 D - MSA FIash utility E - Smart Start Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=83 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 84 What is a recommended guideline for building an array with the ACU? A - Use physical drives that reside on different busses for better system performance. B - Use physical drives that reside on different busses for better system efficiency. C - Use physical disks with different storage capacities for better disk efficiency. D - Use partitioned physical disks for better disk performance. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=84 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 85 You have an array with two physics drives and you are setting up a logical drive with a fault tolerance level. Which RAID level is available for your configuration? A - RAID 0 B - RAID 1 C - RAID 5 D - RAID ADG Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=85 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 86 One cooling blower in an MSA1000 assembly failed and has been removed. What happens? A - The fault LED flashes and the MSA1000 stops operating. B - Nothing. C - The remaining cooling blower operates at a higher speed and initiates a shutdown after approximately 5 minutes. D - The remaining cooling blower operates at a higher speed. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=86 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 87 The CLI (command line interface) of the MSA1000 SAN Switch 6 invokes the. A - ACU-XE B - menu driven user interface C - web-based Management Utility D - telnet session Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=87 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 88 DtS architecture is_____ A - a widely used method to migrate data from one storage system to another B - an exclusive MSA1000 feature C - implemented on all HP storage controllers with universal disk drives D - another RAID level similar to ADG Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=88 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 89 Which MSA1000 interconnect offers the greatest flexibility for integrating the storage controller into an existing SAN topology? A - MSA Hub 2/3 B - MSA SAN Switch 2/8 C MSA Fibre Channel I/O Module D - MSA Fabric Switch 6 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=89 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 90 The embedded MSA1000 SAN Switch 2/8 allows full integration with A - C-series (Cisco) switches B - Hubs C - M-series (McData) switches D - B-series (Brocade) switches Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=90 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 91 Selective Storage Presentation can be used to control access to the A - controller B - array C logical drive D - partition on a disk Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=91 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 92 The positioning of the HP Storage Works MSA1000 is ____ A - for entry-level to mid-range SANs B - only for homogeneous SAN environments C - within the Enterprise Virtual Array (EVA) family D - for private and public loop only Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=92 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 93 Which statement is correct about the host bus adapter used to access an MSA1000? A KGPSA-C HBAs (host bus adapters) are still supported. B - Only operating system specific 2Gb adapters are supported. C - The 2Gb adapters are not operating system specific. D - Dual adapter configurations can double the bandwidth to an MSA1000. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=93 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 94 The MSA1000 Hub 2/3 A - is a cost effective interconnect for a 2-node cluster B - is supported in Tru64 Unix and OpenVMS environments C - can be used for the standby controller if the primary uses the MSA SAN Switch 2/8 D - is cascadable Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=94 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 95 Which interconnect is NOT supported in a TRU64 or OpenVMS environment? A - MSA Fibre Channel I/O Module with external switch B - MSA SAN Switch 2/8 C - MSA Fibre Channel I/O Module connected to a host with an FCA2354 host bus adapter installed over an external SAN Switch 2/16 D - MSA Hub2/3 Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=95 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 96 Different firmware versions on the MSA1000 are used to support _____ A - different operating systems B - 1Gb or 2Gb SANs C - single or dual controller configurations D - Ultra 320 Disks Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=96 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 97 Identify the correct statement about using different Fibre Channel transition speeds (1Gb/2Gb). A - The MSA1000 Fibre Channel port negotiates the speed individually with the host. B - The MSA1000 Fibre Channel port negotiates the speed with the connected switch. C - SANs with MSA1000 must use either 1Gb or 2Gb exclusively. D - 2Gb transmission speed must be used with either the embedded MSA Hub 2/3 or the MSA SAN Switch 2/8. Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=97 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 98 The two controllers in an MSA1000 are working in _____ A - standby/standby mode B parallel mode C - active/active mode D - active/standby mode Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=98 ------------------------------------------------------------------------------------------------------------------------------------- QUESTION: 99 Which cable can be used to connect an MSA1000 with I/O-module to a 1 Gb SAN switch? A LC to LC B - SFF to SFP C - LC to SC D - SC to SC Answer: http://www.twpass.com/twpass.com/exam.aspx?ecode=HP0-238&qno=99 ------------------------------------------------------------------------------------------------------------------------------------- TwPass Certification Exam Features; - TwPass offers over 2500 Certification exams for professionals. More than 98,800 Satisfied Customers Worldwide. Average 99.8% Success Rate. Over 120 Global Certification Vendors Covered. Services of Professional & Certified Experts available via support. Free 90 days updates to match real exam scenarios. Instant Download Access! No Setup required. Price as low as $19, which is 80% more cost effective than others. Verified answers researched by industry experts. Study Material updated on regular basis. Questions / Answers are downloadable in PDF format. Mobile Device Supported (Android, iPhone, iPod, iPad) No authorization code required to open exam. Portable anywhere. Guaranteed Success. Fast, helpful support 24x7. View list of All Exams (AE); http://www.twpass.com/twpass.com/vendors.aspx Download Any Certication Exam DEMO. http://www.twpass.com/twpass.com/vendors.aspx To purchase Full version of exam click below; http://www.TwPass.com/