Transcript
HP690i
Open-Ceiling Speaker Technical Information for System Engineers
Key Features
Specifications: HP690i System Type Impedance (nominal)1 Impedance (minimum)1 Sensitivity dB @ 2.83 V/1 m Sensitivity dB @ 1 W/1 m2 Frequency Response ( - 3 dB)3 Frequency Response ( - 10 dB)3 Max. Program Power4 Max. Continuous Power RMS5 Max. Power SPL @ 1 m6 Coverage Angle (-6 dB @ 2 kHz) Coverage Angle (-6 dB @ 10 kHz) Coverage Angle (averaged 2-10 kHz) Directivity Factor (Q) Directivity Index (DI) Tap Selector Transducer - Low-Frequency Driver Transducer - High-Frequency Driver Low-Frequency Voice Coil Crossover Frequency Network Type: Low Pass Network Type: High Pass Enclosure Material Grille Inputs Colors Included Accessories Optional Accessories Height Diameter Weight Shipping Weight Packaging Regulatory - UL Regulatory - CE
Mounting hardware included 6.5-inch two-way, open-ceiling, ported (66-watt transformer for 25/70.7/100-volt or voice-coil-direct) 8 ohms 5.4 ohms 90.0 dB 90.0 dB 112 Hz - 21 kHz 67 Hz - 22 kHz 200 W 100 W 110.0 dB 110º 90º 100º 4.5 (averaged 100 Hz - 10 kHz); 6.5 (2 kHz) 5.5 dB (averaged 100 Hz - 10 kHz); 8.1 dB (2 kHz) Six-position rotary switch with voice-coil-direct 165 mm (6.50 in.) treated paper cone, cloth surround 36 mm (1.42 in.) titanium compression tweeter with waveguide 34.0 mm (1.34 in.) 3.0 kHz 18 dB per octave, 3rd order 18 dB per octave, 3rd order Injection molded ABS, glass fiber reinforced Steel with powder-coat finish Four-pin, 5 mm Euroblock for individual or daisy chain connection Black or white Hanging hardware, Euroblock connector and terminal weather boot Surface-mount bracket (AC-RS-SM6) 363.5 mm (14.31 in.) 307.3 mm (12.10 in.) 8.4 kg (18.5 lbs.) 9.8 kg (21.5 lbs.) One per box UL 1480 and 2239 approved Approved Transformer Taps
1 Impedance listed per IEC 60268-5 with a minimum less than 80% the nominal impedance
2 1 W 1 m sensitivity determined using nomi nal impedance 3 Frequency response measured in half or full space as dictated by speaker mounting configuration
70.7 V 66 W 35 W 19 W 10 W 5 W
Output 100 V Output 25 V 108.0 dB 66 W 108.0 dB 9 W 105.5 dB 35 W 105.5 dB 4.5 W 103.0 dB 19 W 103.0 dB 2.3 W 100.0 dB 10 W 100.0 dB 1.10 W 97.0 dB
4 Max program power is 3 dB above max continuous power 5 Continuous power rating, EIA-426-B test 6 Max output based on max continuous power
© 2009 SoundTube Entertainment, Inc. All rights reserved. PN TS-HP690i REV 11.24.09
Output 99.5 dB 96.5 dB 93.5 dB 90.5 dB
• Patented BroadBeam ® waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage (up to 10 kHz, independently verified). • One 165 mm (6.5 in.) treated fiber woofer and one 36 mm (1.42 in.) convex aluminum tweeter mounted to a proprietary cast-aluminum M6™ baffle and heat sink. • 66-watt transformer and high output (110.0 dB) for the sound reinforcement and PA markets. • Average sensitivity of 90.0 dB offers high output capabilities and reduced amplification costs. • Weatherized components for indoor and outdoor applications. • Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity. • Includes hanging hardware with galvanized steel cables and integrated SpeedClamp™ self-locking wire grip for fast, easy and secure installation. Also includes Euroblock connector and terminal weather boot. • Easy access 6-position selectable tap switch for 25-, 70.7- and 100-volt applications with voice-coil-direct simplifies ordering and inventory tracking. • Optional accessory: AC-RS-SM6 bracket for surface-mount applications. • High-quality black or white paint finish. Custom paint colors optional.
Description The HP690i is a premium 6.5-inch, twoway, ported, high-efficiency, high-SPL loudspeaker for distributed or 8 ohm applications. The HP690i incorporates a dedicated 6.5-inch treated fiber driver and high-power compression transducer with a BroadBeamHP® waveguide to deliver a consistent dispersion pattern and superb intelligibility for the foreground music, sound reinforcement and PA markets. The HP690i incorporates a 66-watt transformer with a six-position rotary switch and voice-coil-direct position. Hanging hardware is included and features a fast-action SpeedClamp™ for easy and secure installation.
HP690i
Open-Ceiling Speaker Technical Information for System Engineers
Applications Engineered for installations requiring full-range background/foreground music plus paging, the HP690i delivers a smooth and even coverage pattern. Ideal for warehouses, gyms, aerobic rooms, airports, super stores, arenas, theme parks, transportation and shipping centers, stadiums and other highSPL or long-throw applications. For professional sound reinforcement applications, indoors or out, the HP690i includes a cast-aluminum M6™ motorboard, powder-coated steel grille, durable enclosure design and terminal weather boot.
BroadBeamHP® Wide Dispersion Technology
SoundTube’s proprietary BroadBeamHP® technology incorporates a high-frequency compression driver with a 1.375-inch exit mated to a treated fiber woofer. BroadBeamHP® technology delivers a consistent dispersion pattern across the upper registers of the frequency spectrum (up to 10 kHz, independently verified). The result is an audio system with better edge-to-edge coverage, reduced power needs, shorter installation time and cost savings on shipping and labor.
Patented SoundTube Technologies SoundTube Entertainment and MSE Audio Group constantly develop new technologies that enhance audio product performance. SoundTube Entertainment innovations are protected by multiple U.S. and international patents, which explicitly cover SoundTube dispersion, enclosure and dome technologies. MSE Audio Group actively defends its patents in order to protect SoundTube resellers and end users.
Technical Data and Specification Tools Technical Data
SoundTube Entertainment strives to provide complete and effective technical information and data to dealers, engineers and designers. All data are available from SoundTube Entertainment or at www.soundtube.com.
Technical data and downloads include: EASE™ data – 3-D polar plots. EASE™ Address – 2-D modeling for distributed systems Autodesk® Revit® software Tech Sheets – Technical information and architectural specs for system engineers SoundTubeSPEC™ – Proprietary speaker placement software Data Acquisition and Verification
All data for SoundTube speakers are independently collected from and verified by NWAA Labs (www.nwaalabs. com) using their proprietary MACH testing system. All data are collected and analysed according to ASTM,ISO and AES standards using EASRA, TEF and MLSSA. Full balloon data including both phase and magnitude are compiled into a variety of formats including EASE 4.x, GLL and CLF.
Architectural Specifications The loudspeaker shall consist of a 165 mm (6.5 in.) low-frequency transducer and a 36 mm (1.42 in.) high-frequency transducer with a crossover network installed in the ported enclosure. The low-frequency voice coil diameter shall be 34.0 mm (1.34 in.). Performance specifications of a typical production unit shall be as follows: Useable frequency response shall extend from 67 Hz – 22 kHz (-10 dB, half space). Measured sensitivity (2.83-volt input, 1 meter) shall be at least 90.0 dB. The speaker shall have a nominal impedance of 8 ohms and be available for 25-, 70.7- and 100-volt modes with voice coil direct position. The frequencydividing network shall have a crossover frequency of 3 kHz with slopes of 18 dB per octave (3rd order) for the low- and high-pass filters. Rated power capacity shall be at least 100 watts continuous (RMS) and conform to EIA-426-B testing. Maximum continuous output at 1 meter shall be 110.0 dB. The low-frequency transducer shall have a treated fiber cone with cloth surround. The high-frequency transducer shall be constructed of titanium with waveguide.
Installation for the HP690i shall be by galvanized steel cable affixed to the speaker chassis via a hook. For seismic and safety redundancy, a secondary steel cable shall be included and attach to the speaker chassis via #10 bolt. The external wiring input connector shall be a four-pin, 5 mm Euroblock for 8 ohm or distributed systems and shall accept from 10 – 22-gauge wire. The system shall be for indoor and outdoor applications and have a weather-resistant boot covering all wire connectors. The enclosure shall be constructed of injection-molded, glass-reinforced ABS. The grille shall be constructed of powdercoated steel for lasting performance in the elements. Overall cabinet dimensions shall be no more than 363.5 mm (14.31 in.) in height by 307.3 mm (12.10 in.) in diameter and weigh no more than 8.4 kg (18.5 lbs.). The HP690i shall include hanging hardware, Euroblock connector and weather-resistant terminal boot. Optional accessories for the HP690i include surfacemount bracket (AC-RS-SM6), 20-foot hanging cable (AC-RS-HH-20) and 10-foot split loom tubing (AC-SLT-10) for architectural applications. The system shall be the SoundTube HP690i with hanging hardware for both low- and high-impedance applications.
SoundTube Entertainment 6430 Business Park Loop Road Park City, Utah 84098 Phone 435.647.9555 Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com All SoundTube products come with a 5-year limited warranty.
HP690i
Open-Ceiling Speaker Technical Information for System Engineers
Graphs and Plots Impedance/Phase
Frequency Response 110
F re q u e n c yR e s p o n s e
32
100
Im p e d a n c e /P h a s e
180
28
135
24
90
20
45
16
0
12
-45
8
-90
80
60
Ohms
dBSPL
70
50 40 30
Phase (Degrees)
90
20
4
0
10000
5000
2000
1000
500
200
100
Hertz
Vertical Beamwidth 360
50
20
20000
10000
5000
2000
1000
500
200
100
50
20
0 Hertz
-135
Impedance Phase
-180 20000
10
Directivity Index (DI)
V e rtic a lB e a m w id th(-6 d B )
20
D ire c tiv ityIn d e x(D I)
330 15
300 270
10
dB
210 180
5
150 120
0
90 -3dB -6dB -9dB
60 30
-5
0
Technical data, EASE™ plots, SoundTubeSPEC™ software and product downloads available at www.soundtube.com
20000
5000
2000
10000
Hertz
1000
500
200
100
50
20
20000
5000
2000
10000
Hertz
1000
500
200
100
50
-10 20
Degrees
240
HP690i
Open-Ceiling Speaker Technical Information for System Engineers
Polar Plots
125Hz 1/3Oct
250Hz 1/3Oct
Horiz Polar Vert Polar
125 Hz
0 0
330
300
250 Hz 30
0 0
330
-6
-6
-12
-12 300
60
-18
90
240
210
210
150
0 0
4,000 Hz 30
330
120
150
210
150 180
10KHz 1/3Oct
8KHz 1/3Oct
30
330
Horiz Polar Vert Polar 0 0
10,000 Hz 330
30
Horiz Polar Vert Polar 0 0
-6
-6
-6
-12
-12
-12
-12
60
300
60
-18
-24
300
-30 90
120
240
210
270
240
150
120
210
150
270
-30 90
-36
240
270
120
210
180
180
60
-24
-30 90
-36
30
-18
-24
-30
-36
300
60
-18
-24
90
240
-6
-18
270
-36
270
180
8,000 Hz
60
-18
-30 90
120
210
Horiz Polar Vert Polar 0 0
300
-24
240
150
30
-12 60
-36
4KHz 1/3Oct
Horiz Polar Vert Polar
0 0
330
-30 90 270
Horizontal Vertical
-6
-18
180
2KHz 1/3Oct
300
300
120
180
1,000 Hz 30
-24
240
120
0 0
Horiz Polar Vert Polar
-12 60
-36
270
1KHz 1/3Oct
Horiz Polar Vert Polar
-6
-30
-36
330
330
-24
-30
2,000 Hz
500 Hz 30
-18
-24
270
500Hz 1/3Oct
Horiz Polar Vert Polar
150
90
-36
240
120
210
150 180
180
Included Accessories
Mechanical Drawings
363.5 mm (14.31 in.)
Hanging Hardware: Main and Safety Cables w/ SpeedClamp™
307.3 mm (12.10 in.)
Optional Accessory
SoundTube’s hanging cable kit incorporates hanging and safety cables and fasteners for an integrated and easy-to-install system. Hanging and safety cables are infinitely adjustable to 2.74 m (9.0 ft).
Surface-Mount Bracket (AC-RS-SM6)
PROPRIETARY AND CONFIDENTIAL
The information on this file is the sole property of SoundTube Entertainment. Any reproduction in part or whole without written permission from SoundTube Entertainment is strictly prohibited.
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing All SoundTube products are designed and engineered in the USA.
