Preview only show first 10 pages with watermark. For full document please download

Hqp-live Demo Guide (part 1) - Ju-soft

   EMBED


Share

Transcript

HQP-LIVE JU-SOFT CO., LTD HQP-Live Demo Guide (Part 1) Rev 1.0 May 26th , 2017 JU-SOFT CO., LTD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL JU-SOFT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTUOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. HQP-LIVE Demo Guide Part 1 Table of Contents Table of Contents ...................................................................................................................... II 1. Introduction ......................................................................................................................... 3 2. Hardware Installation ....................................................................................................... 3 2.1. Computer Performance Requirements .............................................................. 3 2.2. Connect to HDMI Cameras .................................................................................... 3 2.3. Connect to Large Display Screen via HDMI ..................................................... 4 3. 4. 5. 2.4. Connect to the Internet .......................................................................................... 4 2.5. Install/Update HQP-Live-EZ Software................................................................ 5 Main Window Introduction ............................................................................................ 7 3.1. Full-Screen Main Window (VS6) .......................................................................... 7 3.2 Half-Screen Main Window (VS6s) ........................................................................ 8 3.3 Broadcast Video Format Settings ......................................................................... 9 Main Window Application Template ........................................................................ 10 4.1 Seminar Template Files ........................................................................................... 10 4.2 Template Main Points ............................................................................................. 10 4.3 Template Contents ................................................................................................... 11 4.4 Video Switching and Sources Settings ............................................................. 13 User Name and Application Template ..................................................................... 24 JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW II HQP-LIVE Demo Guide Part 1 1. Introduction Welcome to HQP-Live Demo Guide. HQP-Live software provides complete Live video production features and easy to use. HQP-Live has several version depending on your needs. In this demo, we use HQP-Live EZ as reference. The software can be installed in high-performance gaming notebook or desktop computer. You can connect two Full-HD HDMI cameras to shoot live scenes from different angles. HQP-Live also allows you to create two virtual cameras with auto-pan and zoom features. You can switch between 4 Live/virtual camera sources with special features, like digital video transition effects, Picture in Picture (PIP), Split screen, CG, Logo/Trademark, Timer, Score, Live Recording, and Webcast. HQP-Live is suitable for Live event production, recording and webcast applications. 2. Hardware Installation 2.1. Computer Performance Requirements HQP-Live requires high-performance computer to process Full-HD Live video production, recording, and webcast. We recommend installing on Intel i7/8GB RAM computer. If you want to use all features of HQP-Live, it is recommended to use Intel-i7-6700 CPU, dual-channel DDR4-2133 RAM. It is not recommended to use single-channel memory because the speed is low. HQP-Live functions require high computer performance. In order to maintain a good program output quality, the best CPU rate must be maintained at 75% or less. If the CPU rate is more than 75%, you need to disable some functions or replace with another computer with better performance. 2.2. Connect to HDMI Cameras The system can use “HDMI to USB3 Video Capture” to connect with two Full-HD HDMI cameras via USB3 ports. Then, you can capture cameras’ video signals as video sources. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 3 HQP-LIVE Demo Guide Part 1 Site Display Screen Gaming Notebook or Desktop PC Webcast Recorded File for future use HDMI Cameras HDMI to USB3 Video Capture Note1: HQP-Live broadcasts 1920x1080 (Full-HD) resolution program. The frame rate can be set to 25p / 50i, 29.97p / 59.94i, 30p / 60i. The HDMI signal video format from the camera must meet this specification. Please refer to the camera documentation to set the resolution and frame rate of the camera. Note 2: In this Demo Guide, we use “Live Seminar” application template, which use two video files as video sources. You can practice how to operate and use HQP-Live functions without connecting to physical cameras. 2.3. Connect to Large Display Screen via HDMI HQP-Live can broadcast the program to the TV via HDMI/SDI interface card, as well as through the computer's second display screen to broadcast Full HD program. For details on how to set up a large display screen, see section XXX. 2.4. Connect to the Internet HQP-Live can use the OBS software to stream to YouTube / Facebook via the Internet and broadcast to a wide range of Internet users. For details on how to set up YouTube/Facebook Live Streaming, please refer to section XXX. Note: If you just want to try this software functions without broadcasting the program, you don’t have to connect HDMI large display screen or connect to the network to broadcast. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 4 HQP-LIVE Demo Guide Part 1 2.5. Install/Update HQP-Live-EZ Software HQP-Live-EZ software must be installed on Drive D of Window-7/10 computer. There should be at least 20GB of storage space in Drive D. Users can use the USB flash disk in the software box to install HQP-Live-EZ software, or download the latest version of HQP-Live-EZ software from JU-SOFT website. The installation procedures are not different from general Windows software installation. Please follow the on-screen instructions to complete the installation or reinstall. 1. If you are using USB installation method, just directly click the HQP-Live installer icon as follows: 2. If you download the installation file from website/internet, you need to unzip/extract the file and then install. The installation screen is as follows: 2 1 3 JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 5 HQP-LIVE Demo Guide Part 1 After installation finished, there will be two new folders in Drive D, as follows: D:\HQP_Sys\ : stores the execute files required for HQP-Live-EZ software D:\HQP_Data\ : stores the HQP-Live-EZ generated files, including application templates If the path is not specified, user operation files generated by HQP-Live will be automatically stored in D:\HQP_Data\ Folder or its subdirectories. After installation, you will see four HQP-Live-EZ execute files, as follows: Start with blank template, the contents cannot be changed <@Default> Start with blank template, the contents can be changed and saved. Live seminar template, the contents cannot be changed <@Lecture01>. Starting with Live seminar template, the contents can be changed and saved . JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 6 HQP-LIVE Demo Guide Part 1 7 3. Main Window Introduction HQP-Live-EZ provides two types of main window:  VS6 main window with 1920x1080 display resolution, which provides six video source windows.  VS6s main window with 960x720 display resolution, which also provides six video source windows, but in smaller size. It is suitable for 1366x768 small screen operation, and also suitable for 1920x1080 screen. If you use 1920x1080 screen. You can use one part of the screen for showing online operating instructions, while the other part can be used for operating the HQP-Live software. 3.1. Full-Screen Main Window (VS6) The codename is VS6, displayed in 1920x1080 Full-screen window. The interface is shown as below: (1) 4-channel Audio Mixer (2) Broadcast Monitor (3)Logo/Crawl/Clock/Date/Timer/Score Control area (4) Transition Effects and Video Recording (5) Clip Mark Button (6) 6 Video Source Windows (7) 5-Grid CG Window (1) Four-channel Audio Mixer with adjustable input, output volume, and audio delay time. It can be set to mix mode or bundle mode. (2) Broadcast Monitor Window to monitor the current output. You can also enlarge the monitor. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW HQP-LIVE Demo Guide Part 1 (3) Special Control Area includes logo, crawling text, date/clock CG, Timer/Score CG and Setup. (4) Transition Effect Shortcuts and Video Recording Toolbar. There are 6-9 special effects shortcuts can be selected from total 20 effects. Video recording toolbar includes video record start/split/pause/resume/stop control buttons. (5) Clip Mark button. It allows users to mark the [good] and [bad] part of the current live video when recording, for later purpose or review. (6) Six Video Source Windows, to display camera inputs and use special features such as Virtual PTZ cameras, Picture in Picture, Split Screen, and so on. (7) Five-grid CG Window, consisting 20 CG Pages in total, 5 CG Pages per display list. 3.2 Half-Screen Main Window (VS6s) The codename is VS6s, displayed in 960x1080 half-screen window. VS6s is a smaller version of VS6 with the same function. The right side of the display screen can be used to perform/display other software. HQP-Live can capture other software screens and broadcast it as a TV program. It can be operated on a 1366x768 small computer screen. 960 720 JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 8 HQP-LIVE Demo Guide Part 1 3.3 Broadcast Video Format Settings HQP-Live in different countries may use different video formats, such as 50i, 60i, and so on. In this HQP-Live Demo version, the default broadcast video frame rate is 59.94i. Please notice that the video files you want to open must also have the same frame rate. HQP-Live main window displays software version, broadcast format, user name, and copyright statement as follows: Software Version Broadcast Format User Name Copyright If the broadcast format is different from your camera, please change your camera format or the HQP-Live broadcast format. The procedure is as follows: 1. Left click Setup icon [ ]to open Setup Menu. 2. Click the box near Video Format. 3. Select the frame rate that matches your camera. (1) Left click here to open Setup Menu (2)Left click the box here (3) Select the Frame Rate (4) Click here to confirm 4. Click [OK] button to confirm the changes. HQP-Live will be restarted. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 9 HQP-LIVE Demo Guide Part 1 4. Main Window Application Template 4.1 Seminar Template Files HQP-Live main window template can be set according to your needs. For example, the software comes with a template named "@ Lecture01". Doubleclick the "@ lecture01" icon on the desktop to launch HQP-Live with seminar application template. 4.2 Template Main Points “@Lecture01” template application: The use of two cameras, one camera is filming the stage of experts and scholars, whereas the other camera is filming the audiences. The main points of this template are as follows: 1. Two cameras can be set in advance with fixed shooting angle, so it doesn’t require cameraman/operator. But the template file uses video files to simulate two cameras for trial operation. Please refer to section XXX for the operation of connecting the camera. 2. You can use HQP-Live "PTZ Clone" function, to copy the live video/camera, resulting in two close-up lens screen. So, in total, there are four shooting screens to choose. 3. You can set Picture in Picture and Split Screen, then sent to output screen. 4. The Audio Mixer can receive sounds from computer system audio, Line-in, Mic-in, and camera audio. 5. There are 9 transition effect shortcuts which can be set to enhance the broadcast. 6. You can set the position of the virtual lens capture area. 7. Allows the virtual camera to automatically pan the auditorium area, with better pan stability compared to manual cameraman operation. 8. You can click on any seats in the audience, then the system will quickly zoom the audience and display it at the center of the screen. 9. 5 CG Pages per list. You can create/edit the contents and display it on output screen. There are some preset CG templates, including:  Title and subtitle templates, including seminar name, sponsor/coorganizer, seminar date/location  Speaker name/title CG  Seminar topic CG 10. You can set the texts for Crawl/running texts JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 10 HQP-LIVE Demo Guide Part 1 11. One trademark/logo, which can be chosen from static image or image sequence file. 12. The output can be recorded into 8-25Mbps MP4 files, suitable for postediting. 13. You can mark the timecode of live recorded file which has "good/bad" scene for future purpose. 14. Can be connected to the OBS, then stream to YouTube / Facebook. 4.3 Template Contents Video source windows are configured as follows:       1st window - shows the 1st camera shooting on the stage of the experts and scholars (simulated using a video file) 2nd window - shows the 2nd camera shooting the audiences (simulated using a video file) 3rd window – shows the virtual camera taken by zooming the 2nd camera screen. 4th window - shows the virtual camera taken by zooming the 1st camera screen. 5th window – Split screen combination of the fourth and third cameras 6th window – Picture in Picture, creating a subpicture from 2nd camera screen. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 11 HQP-LIVE Demo Guide Part 1 The Audio Mixer is set as follows:     1st channel – 1st camera audio 2nd channel– 2nd camera audio 3rd channel– Sound from computer Mic-In. 4th channel – Capture the sound of the computer. CG Window is configured as follows:    No. 1 - Clock and Date CG Template No. 2 - Seminar Location Image No. 3 – Seminar Topic CG template   No. 4 - Current speech title No. 5 - Current speaker name Other CG:  LOGO template  Crawl texts template JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 12 HQP-LIVE Demo Guide Part 1 4.4 Video Switching and Sources Settings After executing this HQP-Live version then, you can use mouse to switch the broadcast screen. 4.4.1 Use middle mouse button to broadcast the screen 1. Try to click the middle mouse button on the 2nd frame to broadcast the screen. 2. Broadcast monitor will show the output 3. The broadcasted frame will be marked with red mark and “on air” title. 1. Click middle button on 2nd frame 2. The 2nd frame video will be broadcasted 3. Red mark, showing it’s being broadcasted 4. Try to click 1-4 frame to switch between one another. 4.4.2 Zoom the camera screen If you want to display the camera screen in larger view, you can click left mouse button on the frame title. For example, the operation is as follows: 1. Try to click left button on the 3rd frame title to display the image in larger size. 2. Click left button again to return. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 13 HQP-LIVE Demo Guide Part 1 4.4.3 Adding Digital Transition Effect Digital transition effect can make the broadcast better and smoother. Users need to select the type of special effects, and then click the video window to broadcast. Transition effects can be added only on the first 1-4 camera lens/video source. We suggest not using the effects too frequently. HQP-Live provides two transition effect modes, which are single mode and continuous mode.  Single Mode. Click left mouse button once on the icon to display green   border, the transition effect will only be applied for one time. Continuous Mode. Click left mouse button twice on the icon to display red border and it will lock your selection, the transition effect will be applied continuously. Change shortcut. Right-click on one of the effects buttons to change the shortcut or change the speed. There are 20 available effects can be chosen. Please see below examples: Try to click button [5] once, it will be applied once. Try to double click button [7], it will be applied continuously. (1) Left click on no. [5] effect button, then use the middle button to another video, then observe the transition effect. No.5 effect starts Half-time Near the end of transition (2) Left click on no. [6] effect button, then use the middle button to another video, then observe the transition effect. You can see the transition direction is : Green  White. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 14 HQP-LIVE Demo Guide Part 1 (3) Transition effects is good to use occasionally, but should not be used too much. That’s why HQP-Live also provides single mode. Normally, only Fade [F] effect is often used continuously. (4) Double-click on No. [7] Effect (F = fade out), and switch to another video continuously to observe the effect. Fade transition effect 4.4.4 Adjust the virtual camera lens position manually The virtual camera screen on 3rd frame is taken from the second camera. The user can move the lens position in the following manner: (1) Click the lower right corner of the 3rd frame [ED] to enable editing. (2) The red (+) symbol appears on the screen. It is called the frame core, marked from the original drawing position. (3) Use the left mouse button to drag the (+) symbol to different location to move the virtual lens. (4) External image can also be dragged to the lens to move the lens position, but the image will in the opposite direction of the (+) symbol. (5) The following picture is showing the effect of dragging the red (+) symbol to different positions. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 15 HQP-LIVE Demo Guide Part 1 (1) 2nd frame: Real Camera input fmwylm lgwm why (2) Virtual Lens red (+) symbol position (3) Move the (+) symbol to the left (4) Move the (+) symbol to the right (5) Move (+) symbol to upper right (6) Move (+) symbol to upper left JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 16 HQP-LIVE Demo Guide Part 1 4.4.5 Activate Auto Pan/Scanning HQP-Live can control the virtual camera pan to scan the audience automatically. (1) Keep [ED] button activated (in Red), then right click to open the following menu: (2) There are three panning direction:  Pan Hori. - move the virtual lens in horizontal direction  Pan Z-Loop - move the virtual lens in Z direction  Pan Rect. - move the virtual lens in square direction (3) There are three speed modes: H(high), M(Middle), L(Low) (4) Please select “Pan Hori. Speed L” for example. After one second, it will start move horizontally (5) When user changes the auto pan to another direction, the pan will be paused for one second, then change to the new direction. (6) You can try to move the (+) symbol manually and observe the auto pan response. (7) Please try to set to “Z or Rect.” direction and observe the result. Horizontal Auto Pan Wait 1 sec before it starts/ change direction You can manually drag the screen to Z - Shape Auto Pan JU-SOFT CO., LTD Rectangular Auto Pan 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 17 HQP-LIVE Demo Guide Part 1 4.4.6 Point Quick Zoom and Focus During the live broadcast, if audiences ask a question, the camera can be immediately aimed at the audience, and zoom it. The 2nd camera stays the same, but we can use HQP-Live feature to do this. (1) Click middle button on 3rd frame (Virtual Camera) to broadcast it. (2) Go to the 2nd frame and click left button on [ED], then it will turn red. (3) Please see the image below, when you left click on the woman on 2nd frame, the 3rd frame will quickly display this woman and zoom her. (4) Left click at the man with white shirt and it will be broadcasted on 3rd frame. (5) Left click at the man near the window and it will be broadcasted on 3rd frame. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 18 HQP-LIVE Demo Guide Part 1 4.4.7 Adjust the Split Screen (PNP) ratio and position You can first broadcast the first 1-4 frame, while adjusting the 5th frame (Split Screen). After adjustment finishes, then you can switch to the 5th frame. 1. Go to the 5th frame. Click the [ED] button at the bottom right to enable the editing mode. 2. Drag the dividing line to the left or right, and observe the change of dividing ratio. 3. Go to the 4th frame. Drag the red box to the left or right to change the left screen position of Split Screen. 4. Go to the 3rd frame. Drag the red box to the left or right to change the right screen position of Split Screen. 5. Click the [ED] button again to disable editing mode. 6. Click middle mouse button on the 5th frame to broadcast the screen. Note: The transition effect cannot be applied when switching to Split Screen. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 19 HQP-LIVE Demo Guide Part 1 4.4.8 Broadcast subpictures (Picture in Picture/PIP) The 6th frame in this template is set to PIP. This function will display a video source as subpicture. Compared to the first 1-5 frame (full-screen video), PIP will overlay the current broadcast screen. Try to broadcast or remove the PIP. The operation is as follows: 1. Click middle button on the 1st frame to broadcast it. 2. Click middle button on the 6th frame to display the subpicture on broadcast screen. 3. Click left mouse button on the 6th frame to remove the subpicture from broadcast screen. Tip: Click middle button to display, click left button to remove. 4.4.9 Adjust the subpicture positon/size 1. Click the [ED] button at the bottom right of the 6th frame and it will turn red, indicating that the settings can be changed 2. Red border will appear in both PIP source channel (2nd frame) and PIP channel (6th frame), indicating the display, size and position of the subpicture. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 20 HQP-LIVE Demo Guide Part 1 This template sets the 2nd frame as PIP source PIP frame. Adjustable Size/Position 3. Go to the 6th frame. Click left mouse button and drag the center of red box to move its position. 4. Click left mouse button and drag the corner of red box to resize the subpicture. 5. Click the [ED] button on 6th frame again to disable editing mode. 6. Click middle mouse button on the 6th frame to broadcast the screen. 4.4.10 Adjust the PIP Source This template sets the 2nd frame as PIP source. The user can capture some part of the 2nd frame image as a subpicture. Try to do the following: 1. Click the [ED] button at the 6th frame to enable editing mode 2. Use the left button to drag the center of the red box on 2nd frame to adjust its position. 3. Use the left button to drag the four corners of the red box to adjust the image capture area. This frame shows the PIP source captured area The adjustment of PIP source will take effect immediately on the 6 th frame JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 21 HQP-LIVE Demo Guide Part 1 4. Click the [ED] again to disable editing and red border will disappear. Cancel the edit mode and red border disappear 5. Click middle button on 6th frame to display PIP, click left button on it to remove it. 4.4.11 Change the 5th frame into another PIP 1. Use middle button to play any of 1-4 frame, do not broadcast the 5th frame. 2. Right click on the 5th frame to display the menu. Then, select “Set PiP Mode”. 3. Next, you need to select PIP source channel. Select “1-Live channel’” to use 1st frame screen as subpicture/PIP. 4. Click the [ED] button at the bottom right of the 5th frame to enable the editing mode. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 22 HQP-LIVE Demo Guide Part 1 5. Go to the 1st frame. Drag the center of the red box to move its positon, then drag each corner to resize. The screen behind the red box will be captured as subpicture. 6. Drag the box in the 5th frame to adjust the size and position of the subpicture 7. Click the [ED] button again to disable editing mode. 8. Click middle mouse button on the 5th frame to broadcast the screen. Tip: Click middle button to display, click left button to remove, click right button to show the menu. 4.4.12 Close HQP-Live software 1. Press the [X] button at upper right corner of the main window 2. Press [OK] when confirmation dialog appears. 3. It will take 2-3 seconds before HQP-Live is closed. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 23 HQP-LIVE Demo Guide Part 1 5. User Name and Application Template When you exit HQP-Live, the main window appearance and settings will be changed based on last use. So, in the next use, you can continue your operation quickly. If more than one person use the same HQP-Live, maybe there are a lot of settings to modify. If you want to save your own last settings, you can create a user name or save as a template. The difference between user name and template is as below: - User name: the last main window settings will be saved. - Template: the last main window settings will not be saved after each operation. You need to add “@” in front of the user name, such as: “@Lecture01”. 5.1.1 Save the HQP-Live window settings as a new user name 1. On computer desktop, click HQP-Live icon named "@lecture01". You will notice that the “@” will be removed in user name to avoid overwriting the template content. 2. Check the name of the template on the main window. User Name / Application template Name Note: "@lecture01" and "lecture01" will be the name of the folder, which stores the HQP-Live settings. Saved path is as follows: D:\HQP_Data\User\@ lecture01\ D:\HQP_Data\User\lecture01\ JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 24 HQP-LIVE Demo Guide Part 1 3. Click right button on broadcast monitor window to open a menu. Then, select “Change User/App Name”. 4. Type “@lecture01-test1” on the following dialog, then press [OK] HQP-Live will automatically be restarted. The last settings will be saved in “@lecture01-test1” folder. 5. When HQP-Live is opened, the user name shown will be “lecture01-test1” [“@” will be removed] -------------------------------------------------------------------------------------- This is the end of HQP-Live Demo Guide Part 1. In the next part, we will teach you how to use the CG function, Audio Mixer, Logo, Crawl, and so on. JU-SOFT CO., LTD 10F.-2, NO.25, LN. 169, KANGNING ST., XIZHI DIST., NEW TAIPEI CITY 221, TAIWAN (R.O.C) WWW.JUSOFT.COM.TW 25