Transcript
PARTS LIST FOR
WP-2400-4MHB
Engine Oil Grade: Engine Oil Capacity: Pump Oil Grade: Pump Oil Capacity: Nozzle Size:
SAE10W-30 20 oz. 75W90 Synthetic 4.5 oz. 3.0
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Cold Water Pressure Washer was constructed and designed with quality and performance in mind using over 25 years experience in the pressure washer business. Each component has been rigorously tested to insure the highest level of acceptance. The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice.
WARNING
THIS IS A HIGH PRESSURE, COLD WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER!
1.
NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine Mi-T-M parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty.
2.
NEVER make adjustments on machinery while the unit is connected to the engine without first removing the ignition cable from the spark plug. Turning over the machinery by hand during adjustment or cleaning might start the engine and machinery with it, causing serious injury to the operator.
3.
Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls.
4.
Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. Be especially careful to properly dispose of any flammable materials.
5.
After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving.
SAFETY WARNINGS
Table of Contents SPECIFICATIONS............................................................................................................................................................................................................3 FRAME ASSEMBLY FOR WP-2400-4MHB....................................................................................................................................................................4 PUMP ASSEMBLY (3-0260)............................................................................................................................................................................................6 UNLOADER ASSEMBLY (8-0550)..................................................................................................................................................................................8 LANCE ASSEMBLY (16-0366)........................................................................................................................................................................................10 NOTES.............................................................................................................................................................................................................................11
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
SPECIFICATIONS mOdEL numBER Operating Pressure (PSI/Bar): Water Volume (gPm/lpm): High Pressure nozzle: Engine: Horsepower Engine Type Oil Type Oil Capacity (oz./liter) Fuel Type Fuel Capacity (gallon/liter) Starting Maximum No Load RPM Pump: Oil Type Oil Capacity (oz./liters) Plungers Manifold Valves Unloader Thermal Relief Valve Detergent Injector unit net Weight (Lbs/kg): unit Shipping Weight (Lbs/kg): unit net dimension (In/cm): unit Shipping dimension (In/cm):
WP-2400-4mHB 2400/ 2.3/8.7 3.0 Honda 5.0 4 Stroke, Overhead Cam, Single Cylinder SAE10W-30 20/.6 Unleaded gasoline 8 Octane Minimum .5/2 Recoil 300 Direct Driven, Oil Bath, Triplex Piston 75W-90 Synthetic 4.5 / .13 Stainless Steel Forged Brass Stainless Steel Fixed Relieves heated water during unloader bypass stage Low pressure down stream from pump 7/34 87/39.5 30Lx21Wx26H/76Lx53.5Wx66H 30.5Lx21.5Wx26.5H/77.5Lx54.5Wx67.5H
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
WP-2400-4MHB-071907-RSW
FRAME ASSEMBLY FOR WP-2400-4MHB
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
WP-2400-4MHB-071907-RSW
FRAmE ASSEmBLy FOR WP-2400-4mHB REF. #
dESCRIPTIOn
PART #
QTy.
REF. #
dESCRIPTIOn
PART #
QTy.
decal- die Cut 2000
34-0772
8
Filter
9-000
2
Decal- Work Pro Placard
34-0737
9
Bolt
27-0070
4
3
Decal- Warning/Caution/Operation (See 34-9014)
N/A Sep.
20
Washer
28-0003
8
4
Front Handle Assy
7-094A0
2
Decal- Caution: Risk of Fire(See 34-9014)
N/A Sep.
Locknut
30-07
0
22
Decal- Warning: Risk of Burns (See 34-9014)
N/A Sep.
Isolator
4-0008
2
23
Engine- 5.0 H.P. Honda
-004
7
Bolt
27-008
2
24
Key
43-0073
8
Bolt
27-007
4
2
Pump
3-020
9
decal- data Plate
N/A
2
Lockwasher
29-0007
4
0
Axle Spacer
2-07
2
27
Bolt
27-084
4
Washer
28-0008
28
Thermal Relief Valve
22-0208
2
Wheel
4-007
2
29
Detergent Hose *(Four Feet Required)
-002
3
Hubcap
33-008
2
30
detergent Strainer
9-000
4
grommet
33-000
3
Pressure Hose
-0249
Nozzle- 1503.5
8-00
32
O-ring (Replacement Only)
2-022
-
-
Nozzle- 2503.5
8-0303
33
Decal- Warning: Risk of Injection (See 34-9014)
N/A Sep.
-
Nozzle- 6540
8-048
34
lance Assembly
-03
-023A0
3
Gun/Wand Assembly
-044
23-000
Safety Decal Kit (Inc. 3, 9, 22-23, 35)
34-904
Small JP Frame
7
Garden Hose Swivel
*Must Order in One Foot Lengths
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
3-0260-051404-dlg
PUMP ASSEMBLY (3-0260)
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
3-020-0404-dlg
PumP ASSEmBLy (3-0260) REF. #
dESCRIPTIOn
PART #
QTy.
REF. #
dESCRIPTIOn
PART #
QTy.
8-00
24
Low Pressure Seal
4-0727
3
Unloader Stack Assembly
2
Valve Cap
39-0087
3
2
Retainer Ring
4-0872
3
3
O-ring
2-00
3
2
Spacer
4-0892
3
4
Single Valve Assembly (See 70-0383)
N/A Sep.
3
27
Seal
2-0239
3
Plug
39-009
2
28
O-ring
2-002
O-ring
2-0387
2
29
Screw
27-8432
4
7
Manifold
4-2
30
Case
*CF
8
Bolt
27-890
3
3
O-ring
2-038
9
Lockwasher
29-00
3
32
Plug
39-0203
0
O-ring
2-040
33
Spring
49-042
3
Check Valve
8-08
34
Piston
4-0897
3
2
Spring
49-024
3
Spring Retainer
4-087
3
3
O-ring
2-0407
3
Washer
4-087
4
O-ring
2-09
37
Bearing
48-007
Detergent Injector
4-27
38
Washer
48-00
Hose Barb
4-089
39
Shaft
4-0
7
O-ring
2-037
40
Bearing
48-0083
8
Ball (See 70-0293)
N/A Sep.
4
Oil Seal
2-0279
9
Spring (See 70-0293)
N/A Sep.
42
O-ring
2-003
20
Single Valve Assembly (See 70-0383)
N/A Sep.
3
43
Flange
38-004
2
High Pressure Seal (See 70-0384)
N/A Sep.
3
Valve Kit (Inc. 3 each 4, 20)
70-0383
22
Packing Retainer
4-28
3
High Pressure Seals Kit (Inc. 3 each 21, 23-26)
70-0384
23
O-ring
2-00
3
Injector Repair Kit (Inc. 17-19)
70-0293
*Consult Factory
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
8-0550-051804-DLG
UNLOADER ASSEMBLY (8-0550)
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
8-00-0804-dlg
unLOAdER ASSEmBLy (8-0550) REF. #
dESCRIPTIOn
PART #
QTy.
Nut
30-024
2
Set Screw
27-8000
3
Adjustment Barrel
8-0
4
Spring Button
8-00
2
Unloader Spring
49-04
Piston guide
8-02
7
O-ring
2-038
8
O-ring
2-0403
9
Poppet
8-04
0
Unloader Pin
8-0477
Back-up Ring
2-0404
2
O-ring
2-039
3
Back-up Ring
2-0408
4
O-ring
2-023
2
Piston
8-043
O-ring
2-000
7
Valve Seat
8-003
Unloader Kit (Inc. 1-17)
8-00
©Copyright 2004, Mi-T-M Corporation®
EX-9479-031208
LANCE ASSEMBLY (16-0366)
-03-02700-Rd LAnCE ASSEmBLy (16-0366)
16-0366-102700-RD
REF. #
dESCRIPTIOn
PART #
QTy.
Complete Lance (Inc. 2-4)
-03
2
Coupling
-0378
3
Pipe
-0379
4
Quick Connect
7-000
©Copyright 2004, Mi-T-M Corporation® 10
EX-9479-031208
NOTES
©Copyright 2004, Mi-T-M Corporation® 11
EX-9479-031208
©Copyright 2004, Mi-T-M Corporation® 12
EX-9479-031208
