Transcript
HR5211C 52mm SDS Max Rotary Hammer
1,500W
MODE SELECTION LEVER To select rotation only, Rotation with Hammering or Hammering only. Located on a low damage risk area. Protected by robust aluminium top. NAME PLATE Located on a low damage risk area. RUBBERIZED SOFT GRIP Provides more operator comfort and control.
HAMMERING ONLY For chipping, scaling or demolition operations, using bull point, cold chisel scaling chisel etc.
AUTO CUT-OUT CARBON BRUSH Protects commutator and indicates time for maintenance
ROTATION WITH HAMMERING For drilling in concrete, masonry etc. using a tungsten-carbide tipped bit
LED Green : Electrified Red : Replace carbon brush
DIAL Variable speed control SLIDE CHUCK Push-in and Go Slide-back and Pull
16 ANGLE SETTINGS OF CHISEL BIT For accurate chisel alignment into the workpiece.
TORQUE LIMITER The Torque Limiter will actuate when a certain torque level is reached. The motor will disengage from the output shaft and the bit will stop turning.
LONGER LIFE OF CARBON BRUSHES Features larger carbon brush, which lasts twice a long as that of the preceding model.
NO HAMMERING WHILE IDLING Ensures machine’s long life.
LONG BARREL PORTION Can be securely held by hand.
85 mm
SPECIFICATIONS: Capacities Concrete with diamond core Concrete with TCT bit Continuous rating input No load speed Blows per minute Overall dimensions (L x W x H) Net weight Power supply cord Joule rating
160mm 52mm 1,500W 130 - 260 r/min 1,075 - 2,150 599 x 149 x 287mm 12.2kg 5.0m 19.7 Joules
FEATURES: Double insulation, variable speed, electronic speed control, soft start, torque limiter, SDS-Max shank & carry case
STANDARD EQUIPMENT: Side handle, side grip, depth gauge & grease vessel. (Tool does not come with bit).
