Transcript
HRTL-One DVR Quick Start Guide Step 3: Install hard drive
Step 1: Unpack everything
5. Ensure hard drive is configured as Master. Refer to the documentation that came with the hard drive for the jumper settings.
Your HRTL-One comes with the following items: • One single channel HRTL-One Digital Video Recorder • One hard drive cartridge (hard drive not included) and a key for the cartridge (located inside drive carrier) • One power converter and power cord • One rack mounting kit • HRTL-One Digital Video Recorder User Guide • External I/O connector • 80 GB Hard Drive (included with HRTL-One-80 DVR, not included with HRTL-One DVR)
6. Insert cables on hard drive. New HD Carrier
Original HD Carrier
PC power cable
PC power cable IDE ribbon cable
IDE ribbon cable
Step 2: Remove the hard drive cartridge 7. Secure the hard drive into the hard drive cartridge using the four #6-32 screws supplied.
Ensure HRTL-One is powered off. PAUSE / Up HDD
Hard drive cartridge frame
HDD Full ALARM TIMER
PLAY
REC
REW Left MENU
ENTER
SEARCH
New HD Carrier
FF Right
SLOW
REC
Original HD Carrier
POWER
STOP / Down
New HD Carrier
Original HD Carrier
1. Pull handle towards you.
Key
8. Replace top cover and insert the carrier body into the HRTL-One cartridge frame.
New HD Carrier
2. Insert key and turn to B position.
Active handle
A
Original HD Carrier B
Top Cover
3. Remove carrier body from cartridge frame. Set aside. Cartridge frame Original HD Carrier Carrier body
Cartridge frame
Carrier body
New HD Carrier
9. Turn the key lock to the A position before powering on. This will ensure that the hard drive functions normally.
A Carrier body
B
A = ON (Locked, hard drive cannot be removed) B = OFF (Unlocked, hard drive can be removed)
Step 4: Connect equipment
4. Remove top cover. Original HD Carrier
Figure 1 Single camera installation New HD Carrier
Release Latch
Release Latch
DVR
For Front Panel Operation, see over.
HRTL-One DVR Quick Start Guide
Figure 2 Multiple cameras via multiplexer
LEDs The red light is ON, when: HDD HDD FULL ALARM TIMER PLAY REC
The hard drive is activated. The hard drive is full. When alarm enable is set to Yes and an alarm is triggered, the LED flashes red. When timer enable is Yes. The HRTL-One is in play mode. The HRTL-One is in record mode.
Record Video • • • •
Switch out
When an alarm triggers recording When an external trigger starts recording As scheduled on the Timer screen Manually, when you press REC on the front panel
Play Back Video
Step 5: Program the HRTL-One 1. After powering up, press MENU on the HRTL-One and enter your password (default 0000). 2. Program the HRTL-One: Setting
Path to menu screen
Internal alarm buzzer
Main Menu ➤ System
On-screen display (Date display)
Main Menu ➤ System
Date and Time
Main Menu ➤ System
HDD Overwrite (select Yes or No) Main Menu ➤ System Yes = Continue to record newest image over oldest when hard drive is full (optional) Change your password (optional)
Main Menu ➤ System
Timed daily recording and holiday schedules (Timer Enable; select Yes to use timed recording)
Main Menu ➤ Timer
Images per second ratio, record quality, recording mode (select Frame or Field)
Main Menu ➤ Record
How system responds to an alarm event
Main Menu ➤ Alarm
Control HRTL-One from a remote device
Main Menu ➤ Remote
1. Press PLAY to display the last recorded video clip. 2. Press SLOW for slow play back, REW to play video in reverse at high speed, or FF to play video forward at high speed.
Play Back Single Images 1. Press PLAY, then press PAUSE to lock the current image on the screen. 2. Press to select single image play. Continue to press to move forward, image by image. To view single images in reverse, press
.
Search for Video Clips 1. Press SEARCH. Last Record Full List Alarm List Time Search
Step 6: Operate the HRTL-One LEDs PAUSE / Up HDD
HDD Full ALARM TIMER
PLAY
REC
REW Left MENU
ENTER
SEARCH
FF Right
SLOW
REC
POWER
STOP / Down
2. Select from: Controls
Field
Displays
Last Record The last recorded video
HRTL-One Recorder Functions Control
Press to …
MENU
Enter the Main menu setup, enter the password (default: 0000).
ENTER
Accept changes that you make in menu setup.
SEARCH
Search for previously recorded video.
SLOW
Slow down the speed of Play mode. (X1/2, X1/4, X1/8, X1/16, X1/32)
STOP
Stop recording or playing.
REC
Start recording in manual recording mode. Manual recording overrides timed recording configured in the menu setup.
POWER
Power up the HRTL-One. Press again to power off the HRTL-One.
REW (Left)
Play video backward at high speed. Continue pressing to adjust the speed (1X, 2X, 4X, 8X, 16X, 32X).
FF (Right)
Play video forward at high speed. Continue pressing to adjust the speed (1X, 2X, 4X, 8X, 16X, 32X).
PAUSE
Pause the video at the currently displayed image.
PLAY
Play recorded video.
Full List
Complete list of recorded video, sorted by time.
Alarm List
Recorded alarms, sorted by time.
Time Search Enter time parameters to search for video.
3. Press Enter to play the desired video.
www.honeywellvideo.com +1.800.796.CCTV © 2004 Honeywell International Inc. Document 900.0260 Rev 1.00 10/04 Specifications subject to change without notice. Imperial conversions are approximate.
