Transcript
ADV101
10/100M Ethernet Media Converter
Overview Due to its unique function of link failure alert between electrical port and optical one, the intelligent 10/100M adaptive fast Ethernet media converter can replace the media converter with network management to greatly reduce the system cost. ADV101 Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base–TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120 km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber. Features ●10/100Mbps auto-sensed, facilitating network upgrade ●Built-in efficient switching core to implement flow control and reduce broadcast packets ●Full-duplex and half-duplex auto-sensed ●Supporting
automatic cross
connection
of
twisted
pair interfaces,
facilitating
system
commissioning and installation ●Supporting Link Failure Alert (LFA) ●Supporting half /full-duplex of FX and link failure alert with optional dip-switch ●Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch(unique) ●Supporting low-timelag transmission ●Supporting the transmission of extra-long packets up to1600 bytes ●Supporting the transmission of extra-long VLAN packets ●Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets ●Supporting STP to form a redundant network ●Extremely low power consumption (less than 5W), low heat, reliable and stable performance, and
long lifetime; ●Options in single mode dual fiber, multi-mode dual f fiber, and single mode in single fiber Application 10/100Mbps fast optical Ethernet long-distance transmitting network
Specifications Parameter
Specifications
Access mode
Wavelength
10/100Mbps IEEE802.3 10Base-T IEEE802.3u,100Base-TX/FX Fast Ethernet, control,IEEE802.1q VLAN,IEEE802.1p Spanning Tree 850nm/1310nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2 km;
Standard
Ethernet, IEEE802.3x Flow QoS,IEEE802.1d
Dual-fiber single mode: 20/40/60/80/100/120 km Single fiber single mode: 20/40/60/80//100/120 km Category-5 twisted pairs: 100m Port
One RJ45 por: For connecting STP/UTP category-5 twisted pairs One optical port: Multi-mode, dual fiber: SC or ST (50, 62.5/125μm) Single mode, dual fiber: SC or FC (9/125μm) Single mode Single fiber: SC or FC (9/125μm)
Conversion method
store-and-forward/cut-through
MAC address table
1K
Buffer space
1Mbit
Flow control
Full duplex: flow control; Half duplex: back pressure
Delay
Store-and-forward: 9.6μs cut-through: 0.9μs
BER
<19-9
MTBF
100,000 hours
LED indicator
PWR, TXLink/ACT, FDX, FEF, FXLink/ACT, SPD
Power supply
DC5V 1A (external), AC220 15A/DC-48(internal)
Power consumption
<5W
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~70℃
Storage humidity
5% ~ 90% non-condensing
Dimensions
71mm (W) * 94mm (D) * 26 mm (H) (external power supply) 140 mm (W) * 110 mm (D) * 40 mm (H) (internal power supply) 25 mm (W) * 152 mm (D) * 128 mm (H) (card type)
Weight
0.45kgs(external), 0.8kgs(internal)
Optical parameters Fiber: 62.5/125, 50/125, 100/140μm Output power: >﹣18dBm MM 2Km
Receiving sensitivity: <﹣31dBm Distance: 0～2km or 0～5km Connector: SC(standard)／FC(optional) /ST(optional) Type: dual-fiber Wavelength: 850nm/1300nm/1310nm Fiber:9/125, 8.3/125, 8.7/125 or 10/125μm Distance: 0～20km Output power:-13～﹣8dBm
SM 20km
Receiving sensitivity: <﹣34dBm Connector: SC(standard)／FC(optional) /ST(optional) Type: single-fiber / dual-fiber Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) Distance: 0～40km Output power:﹣11～﹣6dBm
SM 40km
Receiving sensitivity: < ﹣34dBm Connector: SC(standard)／FC(optional) /ST(optional) Type: single-fiber / dual-fiber Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) Distance: 0～60km (when less than 15km, use attenuator) Output power:﹣5～0dBm
SM 60km
Receiving sensitivity: < ﹣36dBm Connector: SC(standard)／FC(optional) /ST(optional) Type: single-fiber / dual-fiber Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) Distance: 0～80km (when less than 15km, use attenuator) Output power:﹣8～-3dBm
SM 80km
Receiving sensitivity: < ﹣36dBm Connector: SC(standard)／FC(optional) /ST(optional) Type: single-fiber / dual-fiber Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) Distance: 0～120km (when less than 15km, use attenuator) Output power:﹣3～5dBm
SM 120km
Receiving sensitivity: < ﹣39dBm Connector: SC(standard)／FC(optional) /ST(optional) Type: dual-fiber Wavelength: 1550nm
Ordering information
Model No.
Description
ADV101-3M02
10/100M
Dual Fiber Multi-mode
1310nm
2km
ADV101-3S20
10/100M Dual Fiber Single-mode
1310nm
20km
ADV101-3S40
10/100M Dual Fiber Single-mode
1310nm
40km
ADv101-3S60
10/100M Dual Fiber Single-mode
1310nm
60km
ADV101-5S80
10/100M Dual Fiber Single-mode
1550nm
80km
ADv101-5S120
10/100M Dual Fiber Single-mode
1550nm
120km
ADV101-3S25B/5S20B
10/100M
Single-mode
WDM
1310/1550nm
25km
ADV101-3S40B/5S40B
10/100M
Single-mode
WDM
1310/1550nm
40km
ADV101-3S80B/5S80B
10/100M
Single-mode
WDM
1310/1550nm
80km
