Transcript
Aluminum Raceway
HBLALU3800 and HBLALU4800 Series Features and Benefits
Single and Two Channel • Single and two channel aluminum raceways. • Satin anodized finish. • Resists oxidation, corrosion and fading. • Can be installed as recessed or surface mounted. • UL Listed and CSA Certified.
Wide Selection of Fittings • External, internal, flat and tee fittings available to accommodate all types of applications. • Available in both single and two channel versions.
Split Covers • Single and two channel raceways utilize common cover. • Split covers allow access to one service at a time. • Common aesthetics throughout line.
Device Cover Plates • Cover plates can be used for both HBLALU3800 and HBLALU4800 Raceways. • Cover plates offer option for most common power device applications. • Low profile bezel cover accommodates Hubbell iSTATION Modules. • Open System data option available. • Base mounted cover plates available for added strength.
www.hubbell-wiring.com
®
Wiring Device-Kellems
R-37
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Aluminum Raceway
HBLALU3800 Series
Fittings
End Fittings
Elbows and Tees
HBLALU3800 Series
Aluminum Raceway and Fittings
Description
Color
Catalog Number
Description
Color
Catalog Number
Single Channel Base Satin anodized finish. Packed 40 ft. (12.19m) per carton, 10 ft. (3m) lengths.
Anodized Aluminum
HBLALU3800B10 A: 2.10" (53.34) B: 3.00" (76.20)
Cover Satin anodized finish. Packed 40 ft. (12.19m) per carton, 5 ft. (1.5m) lengths.
Anodized Aluminum
HBLALUC5 A: 3.00" (76.20)
Assembled cover and base dimensions. W: 3.00" (76.20) H: 2.25" (57.15)
Description
Color
Catalog Number
Description
Color
Catalog Number
Internal Elbow For making a 90° internal turn in a raceway run.
Anodized Aluminum
HBLALU3817* A: 6.00" (152.40) B: 6.00" (152.40)
Inverted Internal Elbow For connecting a vertical run of HBLALU3800 with a horizontal run with its cover facing up.
Anodized Aluminum
HBLALU3817N* A: 6.00" (152.40) B: 5.98" (151.89)
External Elbow For making a 90° external turn in a raceway run.
Anodized Aluminum
HBLALU3818* A: 6.00" (152.40) B: 6.00" (152.40)
Tee For branch connections of two runs of HBLALU3800 Raceway.
Anodized Aluminum
HBLALU3815* A: 6.00" (152.40) B: 6.00" (152.40)
Flat Elbow For making a 90° flat turn in a raceway run.
Anodized Aluminum
HBLALU3811* A: 6.00" (152.40) B: 6.00" (152.40)
Entrance End Fitting For feeding raceway, has concentric ½ in. and ¾ in. trade size KOs.
Anodized Aluminum
HBLALU3810B1 A: 3.00" (76.20) B: 2.31" (58.74)
Blank End Fitting For closing end of raceway.
Anodized Aluminum
HBLALU3810B A: 3.00" (76.20) B: 2.31" (58.74)
Cover Clip To cover seam where lengths of HBLALU3800 Raceway come together.
Stainless Steel
HBLALU3806 A: 1.38" (34.92)
Wire Clip Anodized For holding conductors in place. Aluminum Can be used for either HBLALU3800 or HBLALU4800 Raceway.
Internal Corner Coupling For butting two raceway sections to form an internal 90° turn in a raceway run.
Anodized Aluminum
HBLALU17A A: 4.00" (101.80) B: 2.00" (50.83)
Grounding Adapter For connection of equipment grounding. #10-32 Locking screws included.
Couplings (Pair) To join lengths of HBLALU3800 or HBLALU4800 base.
Aluminum
HBLALU01 A: 2.85" (72.39) B: 4.00" (101.80)
HBLALUWC A: 1.00" (25.40)
Galvanized HBLALU09 Steel A: 4.00" (101.80) B: 2.00" (50.83)
Note: *HBLALU01 couplings included. See page R-40 for cover plates. Dimensions in Inches (mm)
R-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Aluminum Raceway
HBLALU4800 Series
Fittings
End Fittings
Elbows and Tees
HBLALU4800 Series
Aluminum Raceway and Fittings
Description
Color
Catalog Number
Description
Color
Catalog Number
Two Channel Base Satin anodized finish. Packed 40 ft. (12.19m) per carton, 10 ft. (3m) lengths.
Anodized Aluminum
HBLALU4800B10 A: 2.10" (53.34) B: 6.00" (152.40)
Cover Satin anodized finish. Packed 40 ft. (12.19m) per carton, 5 ft. (1.5m) lengths.
Anodized Aluminum
HBLALUC5 A: 3.00" (76.20)
Assembled cover and base dimensions. W: 6.00" (152.40) H: 2.25" (57.15)
Description
Color
Catalog Number
Description
Color
Catalog Number
Internal Elbow (Two Channel) For making a 90° internal turn in a raceway run.
Anodized Aluminum
HBLALU4817* A: 6.00" (152.40) B: 6.00" (152.40)
Inverted Internal Elbow (Two Channel) For connecting a vertical run of HBLALU4800 with a horizontal run with its cover facing up.
Anodized Aluminum
HBLALU4817N* A: 6.00" (152.40) B: 5.98" (151.89)
External Elbow (Two Channel) For making a 90° external turn in a raceway run.
Anodized Aluminum
HBLALU4818* A: 6.00" (152.40) B: 6.00" (152.40)
Tee (Two Channel) For branch connections of two runs of HBLALU4800 Raceway.
Anodized Aluminum
HBLALU4815* A: 9.00" (228.60) B: 9.00" (228.60)
Flat Elbow (Two Channel) For making a 90° flat turn in a raceway run.
Anodized Aluminum
HBLALU4811* A: 9.00" (228.60) B: 9.00" (228.60)
Entrance End Fitting (Two Channel) For feeding raceway, has two concentric ½ in. and ¾ in. trade size KOs.
Anodized Aluminum
HBLALU4810B2 A: 6.00" (152.40) B: 2.31" (58.74)
Blank End Fitting (Two Channel) For closing end of raceway.
Anodized Aluminum
HBLALU4810B A: 6.00" (152.40) B: 2.31" (58.74)
Cover Clip Stainless To cover seam where lengths of Steel HBLALU4800 Raceway come together.
HBLALU4806 A: 1.38" (34.92)
Wire Clip Used for holding conductors in place on raceway. Can be used for either HBLALU3800 or HBLALU4800 Raceway.
Anodized Aluminum
HBLALUWC A: 1.00" (25.40)
Internal Corner Coupling Anodized For butting two raceway sections Aluminum to form an internal 90° turn in a raceway run.
HBLALU17A A: 4.00" (101.80) B: 2.00" (50.83)
Grounding Adapter For connection of equipment grounding. #10-32 Locking screws included.
Galvanized HBLALU09 Steel A: 4.00" (101.80) B: 2.00" (50.83)
Couplings (Pair) To join lengths of HBLALU3800 or HBLALU4800 base.
HBLALU01 A: 2.85" (72.39) B: 4.00" (101.80)
Aluminum
Note: *HBLALU01 couplings included. See page R-40 for cover plates. Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
R-39
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Aluminum Raceway
HBLALU3800 and HBL4800 Series
Cover Plates
Cover Plates and Base Mount Cover Design
Description
Color
Catalog Number
Description
Color
Catalog Number
Duplex Receptacle Cover For duplex receptacles and duplex communication frames shown on page R-45.
Anodized Aluminum
HBLALUDR A: 3.00" (76.20) B: 12.00" (304.80) HBLALU34DRBM (Base Mounted Device) A: 3.00" (76.20) B: 12.00" (304.80)
Toggle Switch Cover For single pole, two pole, three way or four way switches.
Anodized Aluminum
HBLALUN A: 3.00" (76.20) B: 12.00" (304.80) HBLALU34NBM (Base Mounted Device) A: 3.00" (76.20) B: 12.00" (304.80)
Rectangular Style Line ® Cover For Style Line rectangular duplex receptacle, GFCI, surge device or rectangular communication frames shown on page R-45.
Anodized Aluminum
HBLALUG A: 3.00" (76.20) B: 12.00" (304.80) HBLALU34GBM (Base Mounted Device) A: 3.00" (76.20) B: 12.00" (304.80)
Single Receptacle Cover For single receptacle with face diameters of 1.38 in. to 1.39 in. (35.05 to 35.31).
Anodized Aluminum
HBLALUE A: 3.00" (76.20) B: 12.00" (304.80) HBLALU34EBM (Base Mounted Device) A: 3.00" (76.20) B: 12.00" (304.80)
Single Receptacle Cover For single receptacle with face diameters of 1.56 in. to 1.59 in. (39.62 to 40.39).
Anodized Aluminum
HBLALUF A: 3.00" (76.20) B: 12.00" (304.80) HBLALU34FBM (Base Mounted Device) A: 3.00" (76.20) B: 12.00" (304.80)
Single Receptacle Cover For single receptacle with face diameter of 2.13 in. (54.10).
Anodized Aluminum
HBLALUJ A: 3.00" (76.20) B: 12.00" (304.80) HBLALU34JBM (Base Mounted Device) A: 3.00" (76.20) B: 12.00" (304.80)
Blank Cover To cover 12 in. (305.00) section of raceway.
Anodized Aluminum
HBLALUBL A: 3.00" (76.20) B: 12.00" (304.80)
Ortronics® Cover Plate For two Ortronics TracJack® or one Series II® datacom insert. Both bezels included.
Anodized Aluminum
HBLALUABRT A: 3.00" (76.20) B: 12.00" (304.80)
Hubbell iSTATION Cover For mounting Hubbell iSTATION Modules. For the HBLALUPB use the KPIMBZGY on page R-45 with modules from page R-46. For the HBLALULPBA use the IMF1GY on page R-46 or any IFPxxGY plates on page R-45.
Anodized Aluminum
HBLALULPB A: 3.00" (76.20) B: 12.00" (304.80) C: 1.90 (48.26) D: 4.21 (106.93) HBLALULPBA A: 3.00" (76.20) B: 12.00" (304.80) C: 1.90 (48.26) D: 3.00" (76.20)
Base Mounted Device Cover Design
No exposed screw holes. Receptacle is securely mounted to the raceway base rather than the cover.
Ortronics®, Series II® and TracJack® are registered trademarks of The Ortronics Company. Dimensions in Inches (mm)
R-40
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
