Transcript
HVT 2601 CCTV TESTER About the CCTC Tester The new CCTV tester is developed for the On-Site installation and maintenan ce of IP camera and network device with video display, PTZ control,DC12v ou tput power, Audio test, Color generator, RS 485 Data searching, Cable testing . Its new function POE power supply testing, PING testing,IP address scan, V ideo screen shot, Video record, image magnification, Port flicker, LED lamp et c.Also built in New TDR cable testing(Only with T models),especially for BNC cable of the Security monitoring system, accurate measure BNC cable & netw ork cable, control cable break-point and shortcircuit location.
CCTV Tester Features: 1. 2. 3. 4. 5. 6. 7.
LED Lamp,easy to operation at night Micro SD card changeable 3.5"TFT-LCD, 480(RGB)x320, global-view display screen Custom shortcut keys(F1 and F2) new LCD screen Brightness/Contrast/Color Saturation adjustable. Automatically adapts and displays the video format of NTSC/PAL. 10xzoom,Video screen can be magnified to look the details, easy to us e new 8. Video record and playback 9. Snapshot and can capture and save the image in the SD card. new 10.PING testing,test IP camera or the Ethernet port of other network devic e whether work normally or the IP address whether right new 11.IP address scan, quickly search the IP address of the connected IP ca mera and the other network device. 12.POE voltage measurement,test the supply voltage of POE switch to IP cameras, wireless AP device 13.Device Port flicker,easy to find the switch port new 14.Link monitor, check the setting IP address whether available. new 15.PTZ address scan, search up the ID of PTZ camera new 16.Support RS232/RS485/RS422,Rate 600 ~ 115200bps adjustable 17.Multi-protocol. Supports more than thirty PTZ protocols. Such as PELC O-P, PELCO-D, SAMSUNG
18.PTZ protocol analysis,control protocol command displays to check RS4 85 transmission whether is normal, easy to find the fault device 19.PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the fo cus, aperture and sets and the preset position 20. Cable scan, search cable by sound. new
Pictures show
Specifications
Model
HVT CCTV TESTER HVT-2602( 6th generation)
Video Test Signal mode Display LCD adjustment Video IN/OUT Video Output Mode
NTSC/PAL (Auto adapt) 3.5 inch digital TFT-LCD ,480（RGB）x 320 resolution Brightness, Contrast, Saturation adjustable 1 channel BNC Input & 1 channel Output 1.0 Vp-p
Video Level test Level test
Video signals measured in IRE or mV
PTZ controller Communication
Support RS232 and RS485 Compatible with more than 30 protocols such as PELCO-D/P, Samsung, PTZ Protocol Panasonic, Lilin, Yaan, etc. Baud Rate 600,1200,2400,4800,9600,19200,57600,115200bps Video Signal Generation Color bar Output one channel PAL/NTSC color bar video signal for testing generator monitor or video cable.(red, green ,blue, white and black color ) UTP CABLE TEST UTP cable test
Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output DC12V power output
Output DC12V1A power for camera
Audio input test Audio input test
test the pickup and other audio equipments on the front-end
RS485 data analysis Data Monitor
Captures and analyzes the command data from controlling device
10 x zoom of image Image 10x zoom
10x zoom image display and video out
Photograph, Video record, Record playback Photograph Video record
snapshot and save the current image as JPG file Video record and storage the file
Record playback Port flicker
To view the storage file in the SD card
Port flicker
Find the connected POE port quickly.
IP scan, Link monitor, PING test Find out the connected IP camera or the other network equipment IP IP scan address quickly. Link monitor
Check the IP address whether is occupied
PING testing
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
POE tester POE tester
Display the power supply voltage and cable connection states
POWER Power Adapter Battery Rechargeable Low Consumption Parameter
DC 5V（1.5A） Built-in 3.7V Lithium polymer battery ,3000mAh After charging 3-4 hour, working time lasts 11 hours Energy saving technology, the battery icon real-time display
Operation setting
English/Chinese and other languages OSD menu
Auto off Keytone General Working Temperature Working Humidity Dimension/ Weight
5-60 (mins) On/Off -10℃---+50℃ 30%-90% 194mm x 112mm x 48mm / 540g
