Transcript
ZAXIS-3 series
HYDRAULIC EXCAVATOR Model Code : ZX210-3 / ZX210LC-3 / ZX210LCN-3 Engine Rated Power : 122 kW (164 HP) Operating Weight : ZX210-3 : 20 300 kg - 22 000 kg ZX210LC-3 : 20 900 kg - 22 600 kg ZX210LCN-3 : 21 000 kg - 22 100 kg Backhoe Bucket : SAE, PCSA Heaped : 0.51 - 1.20 m3 CECE Heaped : 0.45 - 1.00 m3
KS-EN023EU.indd 1
6/21/2006 1:34:18 PM
The Power to Perform The ZAXIS-3 series is a new generation of excavators designed to provide more efficient power, productivity and improved operator comfort. By listening carefully to the wishes of the end-user, HITACHI not only understands your business, but also provides the reliable solutions you’ve been looking for.
NEW AND IMPROVED Performance: 12% higher production Comfort: Excellent visibility Enhanced controllability Lower noise level New equipment: Standard rear view camera Standard theft deterrent system Reduced running costs: Lower fuel consumption per m3 Improved durability and reliability
2 KS-EN023EU.indd 2
6/21/2006 1:34:36 PM
Productivity
Multi function monitor
Safety measures
New E-mode
Maintenance support
CRES II cab
New hydraulic system HIOS III
Attachment support system
Cab right protection bars
Hydraulic boosting system
Rear view camera
Pilot control shut-off lever
Enhanced boom recirculation system
Theft deterrent system
Engine shut-off switch
New electronic controlled diesel engine
Fuel consumption monitoring
Page 14
Page 4-5
Page 8-9
Operator comfort
Durability and reliability
Array of low noise mechanisms
High visibility inside cab
Strengthened undercarriage
Ecological design
Short stroke levers
Strengthened X beam
Page 15
Wide foot space
Improved idler brackets
Comfort designed seat
Strengthened front attachment
Parts & service
Improved controlability and operator
Page 10-11
Page 16-17
Maintenance
Specifications
Conveniently located inspection points
Page 18-27
Environment measures
comfort Page 6-7
Parallel arrangement of the cooling pack Page 12-13
The new engine complies with the Emission Regulations U.S EPA Tier 3, and EU Stage III A The advanced low noise design complies with the coming EU noise regulation 2000 / 14 / EC, STAGE II
Notes : Some of the pictures in this catalog show an unmanned machine with attachments in an operating position. These were taken for demonstration purposes only and the actions shown are not recommended under normal operating conditions.
KS-EN023EU.indd 3
3 6/21/2006 1:34:45 PM
Boosted Productivity New hydraulic system HIOS III and new OHC 4-valve diesel engine were developed for ZAXIS-3. These advanced technologies are at work to yield bigger output with higher fuel efficiency.
4 KS-EN023EU.indd 4
6/21/2006 1:34:46 PM
More production, less fuel consumption Increased Production
New E-mode
Increase in Swing Torque and Traction Force
A combination of the hydraulic system
The new E mode, H/P mode and
(HIOS*III) and new OHC** 4-valve engine
P mode can be selected to suit job
Swing torque and traction force are
allows the efficient use of hydraulic
needs. The new E mode can save fuel
increased significantly.
pressure to increase speeds of
consumption by up to 13% compared
-Swing torque 13% UP
actuators and boost production with
to the previous model’s P mode, while
-Traction force 11% UP
higher fuel efficiency. The productivity
yielding similar production.
Sophisticated Travel Control;
is increased 12% in comparison to
At climbing or steering, when the
previous model ZAXIS-1.
machine needs more traction force, the engine speed automatically
*Human & Intelligent Operation System
increases which makes the machine
**OverHead Camshaft
faster.
Efficient hydraulic control - HIOS III ZAXIS-1 adapted HIOS II hydraulic system that is suitable for fine controllability by the operators. Continuously HITACHI developed new advanced hydraulic technology HIOS III for ZAXIS-3. In addition to the fine controllability this new system increases the efficiency of hydraulic circuit and increases speed of actuators.
The Hydraulic Boosting System
Enhanced Boom Recirculation System
In arm roll-in and boom raise operation,
In combined operation of boom lower
excess pressure oil is delivered
and arm, pressure oil from boom
from boom cylinder rod side to arm
cylinder bottom side is delivered to
cylinder bottom side to increase flow
boom cylinder rod side, assisted by
rate for higher arm roll-in speed with
boom weight, for boom lowering. At the
20%. Excess pressure oil from boom
same time, pressure oil from the pump
cylinder rod side is delivered to arm
is delivered to the arm cylinder for arm
cylinder bottom side through a
movement.
regenerative valve to increase flow rate
This mechanism allows an increase of
for productive operation.
speed in combined operation of 15%.
Development concept of new engine OHC 4-Valve Engine
Common Rail Type Fuel Injection System
Cooled EGR** System
The new OHC 4-valve diesel engine is
Exhaust gas is partially mixed with
developed and built to comply with the
Electronic control common rail type fuel
intake air to lower combustion
rigorous Emission Regulations enforced
injection system drives an integrated
temperature for reducing NOx and fuel
in 2006 in U.S and EU. This new
fuel pump at an ultrahigh pressure to
consamption.
engine contributes to environmental
distribute fuel to each injector per
What’s more, the EGR cooler cools
preservation. At the same time it
cylinder through a common rail.
down exhaust gas to increase air
realizes high durability and low fuel
This enables optimum combustion to
concentration for complete combustion,
consumption by adapting the latest
generate big horsepower, and reduce
reducing PM* (diesel plume).
advanced engine technology.
PM* (diesel plume) and fuel
*Particulate Matter
consumption.
**Exhaust Gas Recirculation
Fuel Filter Fuel Pump
Common Rail Pressure Sensor Common Rail
Coolant
Control Unit
EGR Cooler EGR Control Valve
Intake Cylinder Head
Fuel Tank
Control Unit
Injector
Exhaust
5 KS-EN023EU.indd 5
6/21/2006 1:34:55 PM
A New Standard in Operator Comfort The operator's seat of the ZAXIS-3 series gives the operator an excellent view of the jobsite. On the widescreen colour LCD monitor the operator can see what is behind the machine. Ample legroom, short stroke levers and a large seat ensure optimum working conditions for the operator during long hours.
6 KS-EN023EU.indd 6
6/21/2006 1:35:04 PM
The ZAXIS-3 series cab has been redesigned to meet demands of customers. From the operator’s seat the operator has an excellent view of the jobsite. On the widescreen color LCD monitor the operator can see machine conditions and with the rear view camera, what is behind the machine. Ample legroom, short stroke levers and a suspension seat with heating ensure optimum working conditions. The seat features horizontal, vertical adjustments and has a backrest contoured for comfort, with a HITACHI logo.
Wide adjustable armrests and a retractable seat belt are included. Short stroke levers allow for continuous operation with less fatigue. Three switches on the lever (optional) can be set to operate attachments other than buckets. The cab is pressurized to keep out dust. Noise and vibrations are kept to a minimum due to the elastic mounts, filled with silicone oil, the cab rests on. Visibility is improved especially for the right downward view. Sliding windows on the front and side enable direct communication between operator and other workers. Foot space has increased and travel pedals have been redesigned for easier operation. A flat floor allows for easy cleaning. Ergonomic controls and switches, fully automatic air conditioner and a radio complete the package.
7 KS-EN023EU.indd 7
6/21/2006 1:35:57 PM
Embedded Information Technology The ZAXIS-3 series is equipped with a widescreen color LCD monitor with adjustable contrast for day and night shifts. With the monitor the operator can check maintenance intervals, select work modes, monitor fuel consumption, and connect to the rear view camera. A theft deterrent system and multilanguage selection is also available.
Multi function monitor
Attachment support system (work mode selector)
The color LCD monitor, located in the cab, indicates coolant temperature, fuel level, and maintenance data. It also allows one-touch adjustment of the attachment. The display can also be
When replacing the attachment, oil flow
adjusted to day or night shift.
adjustment can automatically be done by one touch on the work mode
Maintenance support
selection display on the LCD monitor. Minor adjustments of oil flow is possible if necessary.
Multi-language selection
Replacement timing of hydraulic oil and fuel filters is alerted to the operator through the LCD monitor according to the schedule preset by the user each time when turning the key switch.
The menu allows selection from 12
The scheduled maintenance can
languages.
prevent the failure of the machine.
8 KS-EN023EU.indd 8
6/21/2006 1:36:55 PM
Rear view camera
Theft deterrent system
The widescreen color LCD, teamed up with the rear view camera on the counterweight provides rearward viewing. The electronic immobiliser requires the
The rear view camera automatically
entry of an encryption code to the
works when traveling, and can also be
multifunctional monitor each time when
manually turned on with a select switch
starting the engine to prevent theft and
on the monitor.
vandalism.
Fuel consumption monitoring
Fuel consumption per operating hour is computed, and the result is displayed on the LCD monitor. This information suggests refuelling timing, and guides energy-saving operation and efficient job management.
9 KS-EN023EU.indd 9
6/21/2006 1:37:15 PM
A Solid Base for a Long Life HITACHI’s technology is built on a wealth of experience and know-how from limestone sites and quarries around the world. The undercarriage of the ZAXIS 210 has become much stronger. Improved construction and enlarged box sections, a track undercover plate that protects the center joint and hydraulic hoses make this machine more durable.
10 KS-EN023EU.indd 10
6/21/2006 1:37:25 PM
Strengthened undercarriage Upper rollers and upper roller brackets are increased in size for higher durability. Track links are thickened and reshaped for higher durability and rigidity.
Strengthened X beam and side frames The X-beam is strengthened by the improved construction and enlarged box sections. The section is increased in strength up to 35 % (maximum). Top and bottom plates of the X-beam use monolithic plates, instead of conventional welded four plates. This eliminates welding to strengthen the X-beam.
Improved idler brackets Idler bracket reinforcing plate
The idler bracket reinforcing plate is thickened greatly for higher durability to prevent the opening of the idler bracket. The track link disengagement preventive plate, located immediately behind the idle bracket, extends its top to prevent track link
Increased bracket width
disengagement and increase durability.
Track link disengagement preventive plate
Strengthened front attachment The boom top bracket is strengthened by using high-tensile steel. At arm-bucket joint, the arm top is hardened with WC thermal spraying (TungstenCarbide) for greater wear resistance at its contact surface with bucket, reducing jerking. Reinforced resin thrust plates designed to reduce noise and resist wear. The new HN bushings, containing “solid molybdenum-based lubricant”, are utilized at the boom-arm joint and arm cylinder mounting area for better lubrication and higher durability. (At other joints, conventional HN bushings are also utilized.) The boom foot is enlarged for higher strength. This improvement increases the durability and reliable under heavy-duty operation. New HN bushing
WC Thermal spraying
Reinforced resin thrust plates
11 KS-EN023EU.indd 11
6/21/2006 1:37:40 PM
Simplified Maintenance The ZAXIS-3 series meet customer demands for simplied maintenance. Regular maintenance is the key for keeping equipment in top condition, which can help to prevent costly downtime. In addition, a regular serviced machine has higher residual value. There are many service features to be found on the ZAXIS-3 series.
12 KS-EN023EU.indd 12
6/21/2006 1:37:57 PM
Conveniently located inspection points
Wide doors give access, from ground level, to the fuel filter, water separator and
The fresh air filter for the air conditioner
engine oil filter. A large handrail, steps and anti-skid plates lead to the engine cover.
is relocated to cab door side from
The engine oil pan is fitted with a drain coupler. When draining, an associated drain
conventional location behind the
hose is connected to the drain coupler. The drain coupler is reliable, avoiding oil
operator seat. This allows easy cleaning
leakage and vandalism.
and replacement of the fresh air filter, like the air circulation filter inside the cab.
Parallel arrangement of the cooling pack Easy removal of debris and dirt from blower, etc. Engine
Oil Cooler
Radiator
Intercooler
The oil cooler, radiator and intercooler are laid out in a parallel arrangement, instead of the conventional in-line arrangement. This parallel arrangement is significantly Parallel Arrangement
easier to clean around the engine. The air conditioner condenser can be opened for easy cleaning of the condenser and the radiator located behind.
Extended oil and filter change intervals The oil and filter change intervals have
Front Pin Lubricating Intervals and Consumables Replacement
been extended considerably, New ZAXIS 210 Lubricant
reducing maintenance time and
Bucket
500 h
expenses. Engine oil consumption is
Boom Foot
500 h
lower. Hydraulic oil can be used up to
Front
500 h
Consumables Engine Oil Engine Oil Filter
500 h 500 h
Hydraulic Oil
5 000 h
Hydraulic Oil Filter
1 000 h
Fuel Filter
5 000 hours.
500 h
13 KS-EN023EU.indd 13
6/21/2006 1:38:53 PM
Safety Features Ensuring the safety of the operator and other workers on the jobsite is an important concern for HITACHI. That is why the ZAXIS-3 series has a number of safety features including a new reinforced cab and shut-off mechanisms for engine and pilot controls.
CRES II cab withstanding load : 2.5-fold increase
The CRES II cab is designed to help with “just in case” protection for the operator. Safety in case of tipping is improved. The upper side rails of the cab offer 2.5 times more impact resistance than previous models, absorbing up to 200 mm deformation.
Additional features Cab right protection bars
Evacuation hammer
Engine shut-off switch
Pilot control shut-off lever
FOPS guard
Retractable seat belt
(optional)
Other features include a retractable seatbelt, evacuation hammer and emergency engine shut-off switch. A shut-off lever for pilot control helps to prevent unintentional movements. In addition a Falling Object Protective Structure (FOPS) guard is optionally available. For the cab windows there is a choice of laminated or tempered glass.
14 KS-EN023EU.indd 14
6/23/2006 2:51:15 PM
Environmental Features HITACHI takes its responsibility when it comes to the environment. Our production facilities have ISO 14001 certification. The HITACHI machine is lead free and has a low-noise design, therefore HITACHI customers get one of the most environmentally considerate hydraulic excavators available today.
A cleaner machine The ZAXIS-3 series is equipped with a clean but powerful engine to comply with Tier 3, and Stage III A. An engine emission regulations effective in the U.S. EPA and European Union from 2006. Exhaust gas is partly re-combusted to reduce particulate matter (PM) output and lower nitrogen oxide (NOx) levels.
A quieter machine A number of features make this machine quieter. First, isochronous control of the engine speed means a restriction of engine speed during no-load and light-duty operation to suppress sound. A fan with curved blades reduces air resistance and air flow noise. Third, a time-tested muffler suppresses engine noise significantly. This advanced low noise design complies with the 2000 / 14 / EC, Stage II, directive effective in the European Union from 2006.
A recyclable machine Over 97% of the ZAXIS-3 series can be recycled. All resin parts are marked to facilitate recycling. The machine is completely lead-free. The radiator and oil cooler are made from aluminium and all wires are lead-less. In addition, biodegradable hydraulic oil is available for jobsites where special environmental care is required.
15 KS-EN023EU.indd 15
6/23/2006 2:24:45 PM
Parts & Service Over the years, we have gained experience in one of the most competitive service markets in the world - Japan. Using our know-how in dealing directly with customers, we have created a worldwide support system that is highly capable.
Machine includes optional equipment installed by customer.
16 KS-EN023EU.indd 16
6/21/2006 1:40:23 PM
Parts HITACHI only offers genuine high quality parts. We guarantee that these parts have high performance and long life. We manage around 1 000 000 types of parts all around the world. They are designed and built to be the best match for your HITACHI equipment. HITACHI has a global parts distribution network that makes sure you get what you need as quickly as possible. We have more than 150 dealers worldwide who provide the closest support for your needs. In most cases, your dealer will have the replacement part that you require. If a dealer does not have a certain part, he can order it from four fully stocked parts depots located across the world. These distribution centres are all connected by a on-line system that gives them access to shared information on stocks, such as the number and type of available parts. The depots, which in turn are stocked by a parts center in Japan, minimize delivery time and enable you to get your parts as efficiently and quickly as possible.
Service Our goal is to “keep customer
To minimize downtime during
If you would like more information
equipment at a maximum performance
troubleshooting, we developed a PDA
regarding parts and/or service, please
level”. To fulfil this goal, we have
based diagnostic system called “Dr.ZX”.
ask your nearest HITACHI dealer. Not all
set more than 150 dealers all over
To keep our customers’ equipment
programs and/or services are
the world. They have highly trained
in top running shape, good service is
available in every market or region.
technicians, and provide a number of
indispensable. We believe personnel
support programs.
training is the key to providing the best
HITACHI provides a unique extended
service.
warranty program called HITACHI Extended Life Program, or HELP.
17 KS-EN023EU.indd 17
6/21/2006 1:40:32 PM
EQUIPMENT UPPERSTRUCTURE
ENGINE Model ........................ Type .......................... Aspiration .................. No. of cylinders ......... Rated power ISO 9249, net ........ EEC 80/1269, net .. SAE J1349, net ..... Maximum torque ....... Piston displacement .. Bore and stroke ........ Batteries ....................
Isuzu AI-4HK1X 4-cycle water-cooled, direct injection Turbocharged, intercooled 4 122 kW (164 HP) at 2 000 min (rpm) 122 kW (164 HP) at 2 000 min-1 (rpm) 122 kW (164 HP) at 2 000 min-1 (rpm) 655 N·m (67 kgf·m) at 1 500 min-1 (rpm) 5.193 L 115 mm x 125 mm 2 x 12 V / 88 Ah
HYDRAULIC SYSTEM
Axial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row, shear-type ball bearing with induction-hardened internal gear. Internal gear and pinion gear are immersed in lubricant. Swing parking brake is spring-set/hydraulic-released disc type. Swing speed ............. 13.3 min-1 (rpm)
Operator's Cab Independent spacious cab, 1 005 mm wide by 1 675 mm high, conforming to ISO* Standards. Reinforced glass windows on 4 sides for visibility. Front windows (upper and lower) can be opened. Reclining seat with armrests; adjustable with or without control levers. * International Standardization Organization
UNDERCARRIAGE
2 variable displacement axial piston pumps 2 x 212 L/min 1 gear pump 30 L/min
Hydraulic Motors Travel ........................ 2 variable displacement axial piston motors Swing ........................ 1 axial piston motor
Tracks Tractor-type undercarriage. Welded track frame using selected materials. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals. Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs.
Numbers of Rollers and Shoes on Each Side Upper rollers .............. 2 Lower rollers ............. 7 : ZX210-3 8 : ZX210LC-3 / ZX210LCN-3 Track shoes ............... 46 : ZX210-3 49 : ZX210LC-3 / ZX210LCN-3 Track guard ............... 1
Relief Valve Settings Implement circuit ....... Swing circuit .............. Travel circuit .............. Pilot circuit ................ Power boost .............
Welded sturdy box construction, using heavy-gauge steel plates for ruggedness. D-section frame for resistance to deformation.
Swing Device -1
• Work mode selector Digging mode / Attachment mode • Engine speed sensing system Main pumps .............. Maximum oil flow .. Pilot pump ................. Maximum oil flow ..
Revolving Frame
34.3 MPa (350 kgf/cm2) 34.3 MPa (350 kgf/cm2) 34.3 MPa (350 kgf/cm2) 3.9 MPa (40 kgf/cm2) 36.3 MPa (370 kgf/cm2)
Travel Device Hydraulic Cylinders High-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom and arm cylinders to absorb shock at stroke ends.
Dimensions Quantity
Bore
Rod diameter
Boom
2
120 mm
85 mm
Arm
1
135 mm
95 mm
Bucket
1
115 mm
80 mm
Positioning
1
150 mm
100 mm
Each track driven by 2-speed axial piston motor through planetary reduction gear for counterrotation of the tracks. Sprockets are replaceable. Parking brake is spring-set/hydraulic-released disc type. Travel shockless relief valve built in travel motor absorbs shocks when stopping travel. Automatic transmission system: High-Low. Travel speeds ............. High : 0 to 5.5 km/h Low : 0 to 3.5 km/h Maximum traction force .. 203 kN (20 710 kgf) Gradeability ................ 35° (70%) continuous
Hydraulic Filters Hydraulic circuits use high-quality hydraulic filters. A suction filter is incorporated in the suction line, and full-flow filters in the return line and swing/travel motor drain lines.
CONTROLS Pilot controls. Hitachi's original shockless valve. Implement levers ....... 2 Travel levers with pedals ....................... 2
18 KS-EN023EU.indd 18
6/21/2006 1:40:41 PM
WEIGHTS AND GROUND PRESSURE
SERVICE REFILL CAPACITIES
ZX210-3 WITH MONOBLOCK BOOM: Equipped with 5.68 m monoblock boom, 2.91 m arm and 0.80 m3 bucket (SAE, PCSA heaped). Shoe type
Triple grouser
Shoe width
Operating weight
Ground pressure
600 mm
20 300 kg
45 kPa (0.46 kgf/cm2)
700 mm
20 700 kg
40 kPa (0.41 kgf/cm2)
800 mm
21 000 kg
35 kPa (0.36 kgf/cm2)
900 mm
21 500 kg
32 kPa (0.33 kgf/cm2)
Equipped with 5.68 m monoblock boom, 2.91 m arm and 0.80 m3 bucket (SAE, PCSA heaped).
Triple grouser
Shoe width
Operating weight
BUCKETS
Ground pressure 2
600 mm
20 900 kg
43 kPa (0.44 kgf/cm )
700 mm
21 300 kg
38 kPa (0.39 kgf/cm2)
Capacity SAE, PCSA heaped
Width without side cutters
Weight
800 mm
21 600 kg
33 kPa (0.34 kgf/cm2)
0.56 m3
700 mm
498 kg
900 mm
22 100 kg
30 kPa (0.31 kgf/cm2)
0.68 m
3
800 mm
548 kg
0.80 m
3
1 030 mm
660 kg
0.90 m3
1 000 mm
608 kg
3
1 100 mm
658 kg
1.13 m3
1 200 mm
688 kg
3
1 300 mm
718 kg
ZX210LCN-3 WITH MONOBLOCK BOOM: Equipped with 5.68 m monoblock boom, 2.91 m arm and 0.80 m3 bucket (SAE, PCSA heaped). Shoe type Triple grouser
BACKHOE ATTACHMENTS Boom and arms are of welded, box-section design. 5.68 m monoblock boom, 2-piece boom and 2.03 m, 2.42 m and 2.91 m arms are available.
ZX210LC-3 WITH MONOBLOCK BOOM:
Shoe type
Fuel tank ................................................................................... 400.0 L Engine coolant ............................................................................. 26.0 L Engine oil ..................................................................................... 23.0 L Swing device ................................................................................. 6.2 L Travel device .................................................................................. 6.8 L (each side) Hydraulic system ....................................................................... 240.0 L Hydraulic oil tank ....................................................................... 135.0 L
Shoe width 500 mm
Operating weight 21 000 kg
1.02 m
Ground pressure 2
52 kPa (0.53 kgf/cm )
1.25 m
ZX210-3 WITH 2-PIECE BOOM: Equipped with 2-piece boom, 2.03 m arm and 0.80 m3 bucket (SAE, PCSA heaped). Shoe type
Triple grouser
Shoe width
Operating weight
Ground pressure
600 mm
20 900 kg
47 kPa (0.48 kgf/cm2)
700 mm
21 300 kg
41 kPa (0.42 kgf/cm2)
800 mm
21 600 kg
36 kPa (0.37 kgf/cm2)
900 mm
22 000 kg
32 kPa (0.33 kgf/cm2)
ZX210LC-3 WITH 2-PIECE BOOM: Equipped with 2-piece boom, 2.03 m arm and 0.80 m3 bucket (SAE, PCSA heaped). Shoe type
Triple grouser
Shoe width
Operating weight
Ground pressure
600 mm
21 500 kg
44 kPa (0.45 kgf/cm2)
700 mm
21 900 kg
39 kPa (0.40 kgf/cm2)
800 mm
22 100 kg
34 kPa (0.35 kgf/cm2)
900 mm
22 600 kg
31 kPa (0.32 kgf/cm2)
ZX210LCN-3 WITH 2-PIECE BOOM: Equipped with 2-piece boom, 2.03 m arm and 0.80 m3 bucket (SAE, PCSA heaped). Shoe type
Shoe width
Operating weight
Ground pressure
Triple grouser
500 mm
21 600 kg
54 kPa (0.55 kgf/cm2)
Weight of the basic machines [including 4 750 kg or 5 500 kg counterweight and triple grouser shoes, excluding front-end attachment, fuel, hydraulic oil, engine oil and coolant etc.] are: ZX210-3 .................... 15 900 kg with 600 mm shoes ZX210LC-3 ................ 16 500 kg with 600 mm shoes ZX210LCN-3 ............. 16 700 kg with 500 mm shoes
19 KS-EN023EU.indd 19
7/5/2006 3:23:32 PM
SPECIFICATIONS DIMENSIONS : MONOBLOCK BOOM
Unit: mm A Distance between tumblers B Undercarriage length * C Counterweight clearance D Rear-end swing radius D’ Rear-end length E Overall width of upperstructure F Overall height of cab * G Min. ground clearance H Track gauge I Track shoe width J Undercarriage width K Overall width L Overall length With 2.03 m arm With 2.42 m arm With 2.91 m arm M Overall height of boom With 2.03 m arm With 2.42 m arm With 2.91 m arm N Track height with triple grouser shoes * Excluding track shoe lug
ZX210-3 3 370 4 170 1 030 2 750 2 750 2 710 2 950 450 2 200 G 600 2 800 2 860
ZX210LC-3 3 660 4 460 1 030 2 750 2 750 2 710 2 950 450 2 390 G 600 2 990 2 990
ZX210LCN-3 3 660 4 460 1 020 2 750 2 740 2 480 2 950 450 1 980 G 500 2 480 2 500
9 610 9 610 9 520
9 610 9 610 9 520
9 680 9 680 9 580
3 150 3 180 2 940 920
3 150 3 180 2 940 920
3 150 3 180 2 940 920
G: Triple grouser shoe
WORKING RANGES Unit: mm ZX210-3 / ZX210LC-3 / ZX210LCN-3
meter
5.68 m Monoblock boom Arm length
Ground Line
meter
2.03 m
2.42 m
2.91 m
A Max. digging reach
9 300
9 500
9 990
A’ Max. digging reach (on ground)
9 110
9 320
9 820
B Max. digging depth
5 800
6 180
6 670
B’ Max. digging depth (8' level)
5 580
5 950
6 480
C Max. cutting height
9 850
9 670
10 040
D Max. dumping height
6 940
6 830
7 180
E Min. swing radius
3 480
3 350
3 250
F Max. vertical wall
5 210
5 300
5 990
Bucket digging force** ISO
151 kN (15 400 kgf)
Bucket digging force** SAE : PCSA
129 kN (13 200 kgf)
Arm crowd force** ISO Arm crowd force** SAE : PCSA
145 kN (14 800 kgf) 134 kN (13 700 kgf)
133 kN (13 600 kgf) 124 kN (12 700 kgf)
109 kN (11 100 kgf) 102 kN (10 400 kgf)
Excluding track shoe lug ** At power boost
20 KS-EN023EU.indd 20
7/5/2006 3:23:44 PM
DIMENSIONS : 2-PIECE BOOM
Unit: mm A Distance between tumblers B Undercarriage length * C Counterweight clearance D Rear-end swing radius D’ Rear-end length E Overall width of upperstructure F Overall height of cab * G Min. ground clearance H Track gauge I Track shoe width J Undercarriage width K Overall width L Overall length With 2.03 m arm With 2.42 m arm With 2.91 m arm M Overall height of boom With 2.03 m arm With 2.42 m arm With 2.91 m arm N Track height with triple grouser shoes * Excluding track shoe lug
ZX210-3 3 370 4 170 1 030 2 750 2 750 2 710 2 950 450 2 200 G 600 2 800 2 860
ZX210LC-3 3 660 4 460 1 030 2 750 2 750 2 710 2 950 450 2 390 G 600 2 990 2 990
ZX210LCN-3 3 660 4 460 1 020 2 750 2 740 2 480 2 950 450 1 980 G 500 2 480 2 500
9 570 9 550 9 490
9 570 9 550 9 490
9 640 9 620 9 560
3 010 3 060 2 910 920
3 010 3 060 2 910 920
3 010 3 060 2 910 920
G: Triple grouser shoe
WORKING RANGES Unit: mm ZX210-3 / ZX210LC-3 / ZX210LCN-3
meter
2-piece boom Arm length
Ground Line
meter
2.03 m
2.42 m
2.91 m
A Max. digging reach
9 280
9 500
10 000
A’ Max. digging reach (on ground)
9 090
9 320
9 820
B Max. digging depth
5 420
5 720
6 230
B’ Max. digging depth (8' level)
5 300
5 610
6 120
C Max. cutting height
10 590
10 640
11 080
D Max. dumping height
7 670
7 700
8 150
E Min. swing radius
2 700
2 700
2 390
F Max. vertical wall
4 560
4 720
5 280
Bucket digging force** ISO
151 kN (15 400 kgf)
Bucket digging force** SAE : PCSA
129 kN (13 200 kgf)
Arm crowd force** ISO Arm crowd force** SAE : PCSA
145 kN (14 800 kgf) 134 kN (13 700 kgf)
133 kN (13 600 kgf) 124 kN (12 700 kgf)
109 kN (11 100 kgf) 102 kN (10 400 kgf)
Excluding track shoe lug ** At power boost
21 KS-EN023EU.indd 21
7/5/2006 3:23:45 PM
LIFTING CAPACITIES Metric measure Notes: 1. Ratings are based on ISO 10576. 2. Lifting capacity of the ZAXIS Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. *Indicates load limited by hydraulic capacity. 5. 0 m = Ground.
A: Load radius
A
B: Load point height C: Lifting capacity
B C
ZX210-3 MONOBLOCK BOOM
Rating over-front
Rating over-side or 360 degrees
Load radius Conditions
Boom 5.68 m Arm 2.03 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
6.0
At max. reach
7.5
meter
6.0 m 4.5 m 3.0 m 1.5 m
*6 251 *7 491 *9 244
*6 251 7 005 6 491
0 (Ground) -1.5 m -3.0 m
9 770 9 788 *8 787
6 001 6 016 6 144
*11 571
*11 571
*5 880 *6 246 6 640 6 431 6 311 6 298 *6 205
4 701 4 575 4 370 4 183 4 075 4 063 4 197
4 752 4 670 4 628
3 170 3 095 3 056
*5 955 5 059 4 593 4 456 4 600 5 116 *6 138
Load radius Conditions
Boom 5.68 m Arm 2.42 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
6.0
Boom 5.68 m Arm 2.91 m Counterweight 4 750 kg Shoe 600 m
6.50 7.27 7.67 7.75 7.54 6.99 6.03
meter
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
*9 909 *12 496
Load point height
*9 909 11 444
1.5
*6 955 *8 722 9 929 9 710 9 687 *9 195 *6 488
3.0
*6 955 6 555 6 126 5 940 5 921 6 023 6 310
*5 451 *5 901 6 654 6 418 6 268 6 227 6 316
4.5
4 744 4 597 4 375 4 164 4 030 3 993 4 073
4 747 4 644 4 576
3 161 3 066 3 003
*5 478 4 850 4 410 4 268 4 382 4 828 5 930 *6 077
6.0
3 910 3 252 2 936 2 823 2 882 3 159 3 849 5 924
6.74 7.48 7.87 7.95 7.74 7.21 6.28 4.71
At max. reach
7.5
meter
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
4 102 3 392 3 065 2 958 3 039 3 365 4 177 At max. reach
7.5
Load radius Conditions
Unit : kg
*5 484 *9 973
*5 484 *9 973
*4 848 *9 103 *13 611 *10 626
*4 848 *9 103 11 285 *10 626
*6 274 *8 079 *9 717 9 736 9 651 *9 670 *7 669
*6 274 6 700 6 218 5 957 5 885 5 944 6 148
*4 954 *5 437 *6 294 6 455 6 272 6 194 6 231
4 817 4 658 4 426 4 193 4 030 3 960 3 993
4 881 4 771 4 648 4 556 4 527
3 281 3 180 3 067 2 982 2 956
*4 047 *3 993 4 023 3 903 3 988 4 331 5 137 *5 899
3 456 2 937 2 677 2 579 2 621 2 836 3 347 4 666
7.32 8.01 8.37 8.45 8.25 7.76 6.90 5.52
ZX210LC-3 MONOBLOCK BOOM Load radius Conditions
Boom 5.68 m Arm 2.03 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
6.0
At max. reach
7.5
meter
6.0 m 4.5 m 3.0 m 1.5 m
*6 251 *7 491 *9 244
*6 251 *7 491 7 313
0 (Ground) -1.5 m -3.0 m -4.5 m
*10 705 *10 168 *8 787
6 810 6 825 6 957
*11 571
*11 571
*5 880 *6 246 *6 955 7 389 7 264 7 251 *6 205
5 226 5 098 4 889 4 698 4 588 4 576 4 712
5 413 5 329 5 286
3 546 3 469 3 430
*5 955 5 756 5 232 5 082 5 253 5 853 *6 138
Load radius Conditions
Boom 5.68 m Arm 2.42 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
6.0
4 566 3 786 3 429 3 315 3 411 3 777 4 689
6.50 7.27 7.67 7.75 7.54 6.99 6.03
At max. reach
7.5
meter
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
*9 909 *12 496
*9 909 *12 496
*6 955 *8 722 *10 148 *10 637 *10 318 *9 195 *6 488
*6 955 7 381 6 940 6 748 6 729 6 834 6 488
*5 451 *5 901 *6 660 7 378 7 223 7 180 6 765
5 272 5 122 4 895 4 680 4 543 4 506 4 587
5 410 5 304 5 234
3 537 3 441 3 377
*5 478 *5 500 5 024 4 870 5 009 5 528 *6 302 *6 077
4 351 3 630 3 288 3 168 3 240 3 554 4 330 *6 077
6.74 7.48 7.87 7.95 7.74 7.21 6.28 4.71
Load radius Conditions
Boom 5.68 m Arm 2.91 m Counterweight 4 750 kg Shoe 600 m
At max. reach
Load point height
1.5
3.0
4.5
7.5 meter
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
6.0
*5 484 *9 973
*5 484 *9 973
*4 848 *9 103 *13 611 *10 626
*4 848 *9 103 13 094 *10 626
*6 274 *8 079 *9 717 *10 525 *10 490 *9 670 *7 669
*6 274 7 532 7 036 6 767 6 693 6 753 6 964
*4 954 *5 473 *6 294 *7 119 7 228 7 147 *7 176
*4 954 5 185 4 948 4 711 4 544 4 473 4 506
*5 107 5 435 5 310 5 215 5 185
3 660 3 557 3 443 3 356 3 329
*4 047 *3 993 *4 103 *4 381 4 558 4 956 5 890 8 396
3 848 3 282 3 001 2 898 2 950 3 193 3 767 5 253
7.32 8.01 8.37 8.45 8.25 7.76 6.90 5.52
22 KS-EN023EU.indd 22
7/5/2006 3:23:46 PM
ZX210LCN-3 MONOBLOCK BOOM
Rating over-front
Rating over-side or 360 degrees
Load radius Conditions
Boom 5.68 m Arm 2.03 m Counterweight 5 500 kg Shoe 500 m
Load point height
1.5
3.0
4.5
6.0
At max. reach
7.5
meter
6.0 m 4.5 m 3.0 m 1.5 m
*6 281 *7 581 *9 418
*6 281 6 917 6 405
0 (Ground) -1.5 m -3.0 m -4.5 m
*10 877 *10 311 *8 907
5 934 5 952 6 076
*11 710
11 271
*5 883 *6 283 *7 023 *7 695 7 608 7 594 *6 363
4 698 4 568 4 362 4 175 4 068 4 056 4 179
5 674 5 585 5 537
3 187 3 109 3 066
*5 955 *5 892 5 410 5 259 5 435 6 046 *6 138
Load radius Conditions
Boom 5.68 m Arm 2.42 m Counterweight 5 500 kg Shoe 500 m
Load point height
1.5
3.0
4.5
6.0
Boom 5.68 m Arm 2.91 m Counterweight 5 500 kg Shoe 500 m
6.57 7.34 7.74 7.82 7.61 7.06 6.01
meter
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
*9 559 *12 683
Load point height
*9 559 11 049
1.5
*7 028 *8 874 *10 343 *10 819 *10 473 *9 325 *6 614
3.0
7 001 6 468 6 047 5 870 5 856 5 956 6 230
*5 456 *5 933 *6 722 *7 473 7 566 7 523 *6 874
4.5
4 738 4 589 4 366 4 155 4 023 3 986 4 062
*5 501 5 670 5 560 5 487
3 258 3 176 3 079 3 014
*5 478 *5 500 5 197 5 043 5 186 5 716 *6 302 *6 077
6.0
3 855 3 221 2 914 2 804 2 861 3 129 3 791 5 746
6.81 7.55 7.94 8.02 7.81 7.28 6.35 4.78
At max. reach
7.5
meter
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
4 041 3 358 3 041 2 937 3 016 3 330 4 107
At max. reach
7.5
Load radius Conditions
Unit : kg
*5 426 *9 865
*5 426 *9 865
*4 514 *8 804 *13 855 *10 797
*4 514 *8 804 10 893 *10 797
*6 328 *8 207 *9 900 *10 713 *10 659 *9 813 *7 788
*6 328 6 612 6 136 5 885 5 819 5 878 6 075
*4 956 *5 499 *6 349 *7 201 7 571 7 490 *7 275
4 808 4 649 4 416 4 184 4 022 3 954 3 985
*5 115 *5 476 5 566 5 469 5 437
3 297 3 194 3 080 2 994 2 966
*4 047 *3 993 *4 103 *4 381 4 726 5 134 *5 903 *5 899
3 417 2 915 2 662 2 566 2 608 2 815 3 309 4 566
7.39 8.08 8.44 8.52 8.32 7.83 6.97 5.59
23 KS-EN023EU.indd 23
7/5/2006 3:23:46 PM
LIFTING CAPACITIES Metric measure Notes: 1. Ratings are based on ISO 10576. 2. Lifting capacity of the ZAXIS Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. *Indicates load limited by hydraulic capacity. 5. 0 m = Ground.
A: Load radius
A
B: Load point height C: Lifting capacity
B C
ZX210-3 2-PIECE BOOM
Rating over-front
Rating over-side or 360 degrees
Load radius Conditions
2-Piece Boom Arm 2.03 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
At max. reach
7.5
meter
9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m
6.0
*11 097 *19 564 *29 453
11 097 19 564 29 453
*7 947 *10 924 *12 514 *14 734 *16 471 *16 723 *15 218
7 947 10 924 12 514 12 818 11 978 11 691 11 751
*7 398 *7 395 *8 461 *10 091 10 176 *10 258 10 215 *9 217
7 398 7 395 7 331 7 167 6 967 6 534 6 298 6 167
*6 206 *6 369 6 827 6 729 6 559 6 386
4 744 4 789 4 678 4 474 4 242 4 087
4 748 4 673 4 607
3 124 3 055 2 994
*11 812 *6 657 *5 472 *4 994 4 586 4 446 4 595 *5 018 *5 136
Load radius Conditions
2-Piece Boom Arm 2.42 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
6.0
*11 812 5 898 4 075 3 347 3 012 2 903 2 987 3 322 4 353
2.56 5.17 6.48 7.25 7.65 7.73 7.52 6.97 5.77
At max. reach
7.5
meter
9.0 m 7.5 m
*9 084
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
Unit : kg
*12 345 *18 413 *24 611
*12 345 *18 413 *24 611
*9 084
*11 542 *12 969 *14 641 *16 257 *16 548 *15 840
*11 542 *12 762 *12 681 12 065 11 648 11 586
*6 865 *6 982 *7 922 *9 737 10 113 *10 149 10 191 *9 788
*6 865 *6 982 7 333 7 173 7 054 6 567 6 268 6 063
*5 803 *6 059 *6 716 6 700 6 562 6 342 *5 589
4 850 4 865 4 738 4 504 4 238 4 040 4 021
4 785 4 681 4 572
3 153 3 057 2 957
*8 694 *5 893 *4 970 *4 590 4 387 4 242 4 357 4 810 *4 640
*8 694 5 436 3 866 3 197 2 875 2 759 2 819 3 099 3 821
3.19 5.50 6.74 7.49 7.87 7.95 7.74 7.21 6.25
Load radius Conditions
2-Piece Boom Arm 2.91 m Counterweight 4 750 kg Shoe 600 m
At max. reach
Load point height
1.5
3.0
4.5
0 (Ground) -1.5 m -3.0 m -4.5 m
7.5 meter
9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
6.0
*10 980 *8 834 *11 176 *15 159 *19 211 *20 979
10 980 8 834 11 176 15 159 19 211 20 979
*8 240 *13 613 *14 176 *15 792 *16 399 *16 471 *12 128
8 240 12 843 12 664 12 329 11 724 11 581 11 611
*6 088 *6 219 *7 319 *9 102 *10 113 10 083 10 257 9 965 *6 770
6 088 6 219 7 319 7 176 6 963 6 674 6 319 6 071 6 107
*5 066 *5 431 *5 714 *6 341 *6 698 6 593 6 397 6 273
4 822 4 990 4 935 4 793 4 622 4 347 4 086 3 975
*4 789 4 876 4 759 4 614 4 523
3 303 3 248 3 127 2 993 2 909
*5 426 *4 432 *4 096 *4 010 4 000 3 876 3 963 4 311 *4 411 *6 594
*5 426 *4 432 3 410 2 883 2 618 2 518 2 560 2 777 3 295 5 976
4.30 6.20 7.32 8.01 8.37 8.45 8.25 7.76 6.91 4.57
ZX210LC-3 2-PIECE BOOM Load radius Conditions
2-Piece Boom Arm 2.03 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
At max. reach
7.5
meter
9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m
6.0
*11 098 *19 565 *29 452
*11 098 *19 565 *29 452
*7 949 *10 932 *12 526 *14 747 *16 485 *16 737 *15 230
*7 949 *10 932 *12 526 14 223 13 863 13 560 13 621
*7 401 *7 399 *8 467 *10 101 *10 581 *10 599 *10 823 *9 227
*7 401 *7 399 8 043 7 895 7 825 7 381 7 138 7 004
*6 210 *6 374 *7 051 *7 541 7 546 7 367
5 284 5 330 5 218 5 010 4 775 4 617
*5 414 5 351 5 283
3 512 3 442 3 381
*11 814 *6 660 *5 476 *4 998 *4 844 *4 925 *5 255 *5 025 *5 144
Load radius Conditions
2-Piece Boom Arm 2.42 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
6.0
2.56 5.17 6.48 7.25 7.65 7.73 7.52 6.97 5.77
At max. reach
7.5
meter
9.0 m 7.5 m
*9 085
6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m
4.5
*11 814 6 581 4 554 3 754 3 389 3 274 3 372 3 750 4 916
*12 347 *18 415 *24 612
*12 347 *18 415 *24 612
*11 550 *12 980 *14 654 *16 271 *16 562 *15 852
*9 085
*11 550 *12 980 *14 106 13 957 13 518 13 452
*6 869 *6 985 *7 927 *9 745 *10 479 *10 497 *10 644 *9 798
*6 869 *6 985 *7 927 7 858 7 678 7 416 7 109 6 898
*5 807 *6 064 *6 722 7 484 7 500 7 324 *5 597
5 394 5 373 5 240 5 042 4 772 4 571 4 552
*5 328 5 360 5 249
3 542 3 445 3 344
*8 696 *5 896 *4 974 *4 594 *4 484 *4 581 *4 904 *5 194 *4 647
*8 696 *5 896 4 320 3 587 3 239 3 117 3 189 3 507 4 321
3.19 5.50 6.74 7.49 7.87 7.94 7.74 7.21 6.25
24 KS-EN023EU.indd 24
7/5/2006 3:23:47 PM
ZX210LC-3 2-PIECE BOOM
Rating over-front
Rating over-side or 360 degrees
Load radius Conditions
2-Piece Boom Arm 2.91 m Counterweight 4 750 kg Shoe 600 m
Load point height
1.5
3.0
4.5
0 (Ground) -1.5 m -3.0 m -4.5 m
At max. reach
7.5
meter
9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m
6.0
Unit : kg
*10 981 *8 835 *11 177 *15 160 *19 212 *20 980
*10 981 *8 835 *11 177 *15 160 *19 212 *2 098
*8 244 *13 624 *14 189 *15 794 *16 413 *16 483 *12 140
*8 244 *13 624 14 061 14 165 13 600 13 448 *12 140
*6 091 *6 222 *7 323 *9 110 *10 304 *10 454 *10 526 *10 428 *6 779
*6 091 *6 222 *7 323 7 874 7 725 7 527 7 162 6 908 *6 779
*5 068 *5 435 *5 719 *6 347 *7 266 7 448 7 382 *6 910
*5 068 *5 435 5 396 *5 267 5 106 4 883 4 618 4 505
*4 794 *5 045 *5 401 5 293 5 200
3 694 3 639 3 516 3 381 3 296
*5 428 *4 435 *4 098 *4 012 *4 009 *4 085 *4 340 *4 856 *4 418 *6 603
*5 428 *4 435 3 814 3 239 2 953 2 848 2 901 3 146 3 728 *6 603
4.30 6.20 7.32 8.01 8.37 8.45 8.25 7.76 6.91 4.57
ZX210LCN-3 2-PIECE BOOM Load radius Conditions
2-Piece Boom Arm 2.03 m Counterweight 5 500 kg Shoe 500 m
Load point height
1.5
3.0
6.0
At max. reach
7.5
meter
9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m
4.5
*10 934 *19 212 *28 531
*10 934 *19 212 *28 531
*7 766 *11 008 *12 750 *14 966 *16 900 *17 170 *15 632
*7 766 *11 008 *12 457 12 273 11 494 11 235 11 306
*7 451 *7 482 *8 612 *10 253 *10 753 *10 780 *11 008 *9 445
*7 451 7 408 7 255 7 078 6 858 6 434 6 212 6 085
*6 232 *6 439 *7 155 7 797 *7 854 7 712
4 741 4 779 4 669 4 465 4 232 4 077
*5 571 5 610 5 534
3 143 3 069 3 002
*11 814 *6 660 *5 476 *4 998 *4 844 *4 925 *5 255 *5 025 *5 144
Load radius Conditions
2-Piece Boom Arm 2.42 m Counterweight 5 500 kg Shoe 500 m
Load point height
1.5
3.0
6.0
At max. reach
7.5
*9 200
*12 100 *18 078 *24 096
*12 100 *18 078 *24 096
*9 200
*11 644 *13 131 *14 901 *16 653 *17 000 *16 274
*11 644 *12 439 12 382 11 569 11 187 11 146
*6 927 *7 056 *8 052 *9 911 *10 661 *10 676 *10 823 *9 990
*6 927 *7 056 7 254 7 094 6 941 6 463 6 182 5 978
*5 845 *6 126 *6 818 *7 693 *7 745 7 667 *5 816
4 841 4 853 4 727 4 495 4 228 4 028 4 002
*4 751 *5 389 5 620 5 504
3 203 3 170 3 070 2 968
*8 696 *5 896 *4 974 *4 594 *4 484 *4 581 *4 904 *5 194 *4 647
Load radius Conditions
2-Piece Boom Arm 2.91 m Counterweight 5 500 kg Shoe 500 m
Load point height 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m -4.5 m
2.63 5.24 6.55 7.32 7.72 7.80 7.59 7.04 5.84
meter
9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 (Ground) -1.5 m -3.0 m
4.5
*11 814 5 725 4 002 3 304 2 981 2 875 2 957 3 279 4 261
1.5
3.0
4.5
6.0
*8 696 5 290 3 801 3 158 2 847 2 735 2 792 3 062 3 753
3.26 5.57 6.81 7.56 7.94 8.02 7.81 7.28 6.32
At max. reach
7.5
meter
*9 230 *8 030 *10 863 *14 854 *18 816 *20 439
*9 230 *8 030 *10 863 *14 854 *18 816 *20 439
*8 245 *13 741 *14 414 *16 122 *16 848 *16 901 *12 466
*8 245 12 509 12 338 11 816 11 255 11 126 11 166
*6 090 *6 214 *7 424 *9 311 *10 486 *10 632 *10 707 *10 636 *7 000
*6 090 *6 214 7 292 7 093 *6 877 6 567 6 221 5 992 6 018
*5 176 *5 475 *5 775 *6 432 *7 395 *7 690 7 729 *7 072
4 817 4 971 4 916 4 775 4 636 4 337 4 076 3 962
*4 844 *5 087 *5 475 5 551 5 449
3 321 3 261 3 141 3 005 2 915
*5 428 *4 435 *4 098 *4 012 *4 009 *4 085 *4 340 *4 856 *4 418 *6 603
*5428 4 431 3 363 2 854 2 597 2 500 2 541 2 750 3 249 5 768
4.37 6.27 7.39 8.08 8.44 8.52 8.32 7.83 6.98 4.64
25 KS-EN023EU.indd 25
7/5/2006 3:23:47 PM
EQUIPMENT STANDARD EQUIPMENT
Standard equipment may vary by country, so please consult your Hitachi dealer for details.
ENGINE
CAB
MONITOR SYSTEM
UNDERCARRIAGE
• H/P mode control • E mode control • 50 A alternator • Dry-type air filter with evacuator valve (with air filter restriction indicator) • Cartridge-type engine oil filter • Cartridge-type fuel double filters • Air cleaner double filters • Radiator, oil cooler and intercooler with dust protective net • Radiator reserve tank • Fan guard • Isolation-mounted engine • Auto idle system • Fuel cooler • Electrical fuel feed pump • Engine oil drain coupler
• CRES II (Center pillar reinforced structure) cab • OPG top guard fitted Level I (ISO10262) compliant cab • All-weather sound suppressed steel cab • Equipped with reinforced, tinted (green color) glass windows • 4 fluid-filled elastic mounts • Front windows on upper, lower and left side can be opened • Intermittent windshield wipers • Front window washer • Adjustable reclining seat with adjustable armrests • Footrest • Electric double horn • AM-FM radio with digital clock • Seat belt • Drink holder • Cigarette lighter • Ashtray • Storage box • Glove compartment • Fire extinguisher bracket • Floor mat • Short wrist control levers • Pilot control shut-off lever • Engine shut-off switch • Auto control air conditioner • Transparent roof with slide curtain • Mechanical suspension seat with heater
• Display of meters: water temperature, hour, fuel rate, clock • Other displays: work mode, auto-idle, glow, rearview monitor, operating conditions, etc • Alarms: overheat, engine warning, engine oil pressure, alternator, minimum fuel level, hydraulic filter restriction, air filter restriction, work mode, overload, etc • Alarm buzzers: overheat, engine oil pressure, overload
• Travel parking brake • Travel motor covers • 1 track guard (each side) and hydraulic track adjuster • Bolt-on sprocket • Upper and lower rollers • Reinforced track links with pin seals • 4 tie down hooks
HYDRAULIC SYSTEM • Work mode selector • Power boost • Auto power lift • Control valve with main relief valve • Extra port for control valve • Suction filter • Full-flow filter • Pilot filter • Swing dampener valve
LIGHTS • 2 working lights UPPER STRUCTURE • Undercover • 4 750 kg counterweight (ZX210-3, ZX210LC-3) 5 500 kg counterweight (ZX210LCN-3) • Fuel level float • Electric fuel refilling pump with auto stop • Rear view camera • 150 Ah batteries • Hydraulic oil level gauge • Tool box • Utility space • Rear view mirror (right & left side) • Swing parking brake
FRONT ATTACHMENTS • HN bushing • WC (tungsten-carbide) thermal spraying • Reinforced resin thrust plate • Flanged pin • Casted bucket link A • Centralized lubrication system • Dirt seal on all bucket pins MISCELLANEOUS • Standard tool kit • Lockable machine covers • Lockable fuel refilling cap • Skid-resistant tapes, plates and handrails • Travel direction mark on track frame • Onboard information controller
26 KS-EN023EU.indd 26
7/5/2006 3:23:48 PM
OPTIONAL EQUIPMENT
Optional equipment may vary by country, so please consult your Hitachi dealer for details.
CAB
UNDERCARRIAGE
OTHERS
• Laminated round glass window • FOPS guard • Air suspension seat with heater • Rain guard • Sun visor • 12 V power source
• 2 track guards • Track undercover
• Hose rupture valve • Overload warning device • Pre-cleaner • 5 350 kg heavy counterweight (ZX210-3, ZX210LC-3) • Biodegradable oil
LIGHTS • Additional cab roof front lights • Additional cab roof rear lights • Rotating lamp • Additional boom light with cover
ATTACHMENTS • Hammer and crusher piping • Parts for hammer and crusher • 2 pump combined flow assist piping • Additional pump (30 L/min) • Pilot accumulator • High mesh full flow filter with restriction indicator • Welded bucket link A with welded hook
27 KS-EN023EU.indd 27
7/5/2006 3:23:48 PM
These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in colour and features. Before use, read and understand the Operator’s Manual for proper operation.
Hitachi Construction Machinery www.hitachi-c-m.com
KS-EN023EU.indd 28
KS-EN023EU
7/5/2006 3:23:48 PM
