Transcript
SPECIFICATIONS PERFORMANCE Bucket Capacity (ISO heaped) Travel Speed Swing Speed Gradeability Drawbar Pulling Force WEIGHT Operating Weight Ground Pressure ENGINE Model Type Power Output Max. Torque Displacement HYDRAULIC SYSTEM Pump Max. Discharge Flow Relief Valve Setting Swing Motor Travel Motor Hydraulic Oil Tank
WORKING RANGES
Unit: mm
0.45 m3 5.3/3.0 km/h 11.0 min-1 {rpm} 35° (70%) 157kN {16,000 kgf} (ISO 7467) 14,700 kg 24 kPa (900 mm shoe)
HYDRAULIC EXCAVATORS
MITSUBISHI D04FR-74kW Direct injection, water cooled 4-cylinder. 4-cycle diesel engine with turbocharger, intercooler 74 kW/2,000 min-1 (ISO14396)* 69.2 kW/2,000 min-1 (ISO9249) 375 N•m/1,600 min-1 (ISO14396)* 359 N•m/1,600 min-1 (ISO9249) 4.249 L Two variable displacement pumps + One gear pump 2 x 130 L/min, 1 x 20 L/min 34.3 MPa {350 kgf/cm2} Axial piston motor Two x axial piston, two step motors 172 L system/101 L tank level
Bucket Capacity: Engine Power:
*ISO 14396 meets EU regulation.
DIGGING FORCE (ISO 6015) Arm Length Bucket Digging Force Arm Crowding Force
2.38 m 90.1 kN 64.4 kN
GENERAL DIMENSIONS
Unit: mm
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may reproduce in any manner without notice.
Inquiries To: 17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN Tel: ++81 (0) 3-5789-2146 Fax: ++81 (0) 3-5789-2135 www.kobelco-kenki.co.jp/english_index.html
is the corporate mark used by Kobe Steel on a variety of products and in the names of a number of Kobe Steel Group companies.
Bulletin No. SK130L-101
2010022000 Printed in Japan
Designed with Logging and Wetland Operation in Mind PERFORMANCE Powerful Arm Crowding Force
Wide Shoes Ensure Plenty of Traction
The bucket comes into play when a site needs to be cleaned up before logging. The SK130L provides plenty of arm crowding force and bucket digging force for these kinds of logging applications.
You can count on smooth and dependable travel with the longer crawler and wider shoe that are usually used on machines the next class up.
KOBELCO is proud to announce the SK130L from ACERA GEOSPEC Series, with specifications designed with logging and wetland operation in mind. The SK130L offers a full complement of advanced functions that get the job done no matter what the terrain.
DURABILITY & RELIABILITY Anti-Dirt Guard
New Fuel Filter System
The insides of the engine compartment and both service doors on upper frame are fitted with mesh to keep out dirt and branch.
A new fuel filter system has been installed that can handle the most punishing conditions. It now has a pre-filter (with built-in water separator), an ultra-fine main filter, and additional third filter, to ensure complete removal of dust and other impurities in the fuel.
Arm crowding force:
64.4 kN Bucket digging force:
90.1 kN Ample Work Radius for Collection Scattered Logs A long reach and high dumping height come in handy when loading/unloading a log sled, collecting scattered logs, or working in forested terrain that has lots of obstacles.
MAINTENANCE
Tool box
Longer Crawler Length:
Large-capacity tool box.
3,790 mm Wider Shoe Width:
900 mm
Rock Guard Under-side of arm reinforced with a rock guard to prevent damage to arm.
Parallel cooling units are easy to clean. Air cleaner
Air conditioner condenser
Max. Dumping Clearance:
6,280 mm
Top-class Ground Clearance:
585 mm Max. Digging Reach:
8,340 mm
Bad Roads and Wetlands? No Problem! The Sk130L provides the powerful travel needed to pull log sleds or work in lowlands rough terrain in woods on firms.
Low Ground Pressure Low ground pressure is assured by oversized crawler length and width, for smoother and easier transfer and travel. Ground Pressure:
24 kPa Large Capacity Fuel Tanks One of the largest-capacity fuel tanks in the class delivers longer uninterrupted working. Fuel Tank:
275 L
Top-class Drawbar Pulling Force:
157 kN
Reinforced Undercover Reinforced Undercover protects the piping and other components from damage caused by accidental contact with branch, debris and other obstacles.
Oil cooler
Radiator Intercooler
COMFORT Spacious Cab Among Largest in the Class Being the same as the cab used on the ACERA GEOSPEC SK200, the cab provides all the same advantage: easy access, lots of leg room, a large, comfortable seat and panoramic view of the worksite.
Hydraulic Excavators
■ Bucket Capacity:
0.8 –1.3 m3 ISO heaped ■ Engine Power:
118kW {160 PS}/2,000 min-1{rpm} ■ Operating Weight:
20,400 kg–SK200 20,900 kg–SK210LC
The Power Wave of Change
Announcing ACERA GEOSPEC and the Concept of Beautiful Performance. When we set out to design our new hydraulic excavators, we kept our eyes on the big picture. Of course we wanted machines with greater digging capacity. But they also had to be fuel-efficient and economical, while imposing less of a burden on the local and global environments. Applying our advanced technologies, we developed KOBELCO's new ACERA GEOSPEC series, an entirely new kind of excavator that beautifully balances all the demands of today's construction industry. Lean and efficient with capacity to spare, these sleek powerhouses bring a whole new style to the worksite while setting new standards for environmental responsibility.
Photos in this catalog are the optional specs with 0.93 m3 bucket and 800 mm shoes.
1
Pursuing the “Three E’s” The Perfection of Next-Generation, Network Performance
Enhancement Greater Performance Capacity ●New hydraulic circuitry minimizes pressure loss ●High-efficiency, electronically controlled
Common Rail Fuel Injection Engine travel and arm/bucket digging force
●Powerful
Economy Improved Cost Efficiency ●Advanced
power plant that reduces fuel consumption ●Easy maintenance that reduces upkeep costs ● High structural durability and reliability that retain machine value longer
Environment Features That Go Easy on the Earth ●Auto Idle Stop as standard equipment ●Noise reduction measures (with improvement
of the sound quality) minimize noise and vibration
ACERA GEOSPEC The “GEO” in GEOSPEC expresses our deep respect for our planet, and for the solid ground where excavators are in their element. This is accompanied by SPEC, which refers to the performance specifications needed to get the job done efficiently as we carry on the tradition of the urban-friendly ACERA series.
2
The GEOSPEC Difference:
Efficient Performance! Amazing Productivity with a 20 % Decrease in Fuel Consumption and “Top-Class” Cost-Performance
Fuel Consumption*
20 %
decrease in fuel consumption even when performing more work volume. (S-Mode)
Work Volume *
8%
increase in work volume using the same amount of fuel. (H-Mode)
“Top-Class” Powerful Digging Max. arm crowding force: Max. arm crowding force with power boost: Max. bucket digging force: Max. bucket digging force with power boost:
102 kN {10.4 tf} 112 kN {11.4 tf} 143 kN {14.6 tf} 157 kN {16.0 tf}
Powerful Travel Travel torque: increased by Drawbar pulling force:
16 % 229 kN {23.3 tf}
Greater Swing Power, Shorter Cycle Times Swing torque: increased by Swing speed:
10 % 11 %
faster (12.5 min-1) Significant Extension of Continuous Working Hours The combination of a large-capacity fuel tank and excellent fuel efficiency delivers an impressive 30 % increase in continuous operation hours. One tank of fuel keeps the machine operating under high-load conditions for more than 20 hours.**
Fuel tank:
370 L
30 %
Light Lever Operation It takes 10% less effort to move the control levers, so that operators can work longer hours with less fatigue.
10 % Less
Photos in this catalog are the optional specs with 0.93 m3 bucket and 800 mm shoes.
NEXT-3E Technology New Hydraulic System Rigorous inspections for pressure loss are performed on all components of the hydraulic piping, from the spool of the control valve to the connectors. This regimen, combined with the use of a new, high-efficiency pump, cuts energy loss to a minimum.
*The value shows results from actual measurements taken by KOBELCO when compared with previous KOBELCO models. **The value shows results from actual measurements taken by KOBELCO for continuous operation in S Mode, compared with previous models. Results vary depending on the method of operation and load conditions.
3
Performance NEXT-3E Technology Next-Generation Electronic Engine Control
Simple Select: Two Digging Modes
The high-pressure, common-rail fuel-injection engine features adjustable control to maximize fuel efficiency and provide powerful medium/low-speed torque. The result is a highly fuelefficient engine.
H H-Mode
S S-Mode
For heavy duty when a higher performance level is required. For normal operations with lower fuel consumption.
Optional N&B (crusher and breaker) The operator selects the desired mode from inside the cab, and the selector valve automatically configures the machine accordingly. Attachment Mode Selector Switch There’s a choice of three different hydraulic circuits, to accommodate bucket, crusher or breaker, and the desired attachment mode can be selected with a switch, which automatically configures the selector valve. All attachment modes can be used in either Smode or H-mode.
Seamless, Smooth Combined Operations The GEOSPEC machines have inherited the various systems that make inching and combined operations easy and accurate, with further refinements that make a good thing even better. Leveling and other combined operations can be carried out with graceful ease. ● Electronic Active Control System ● Arm regeneration system ● Boom lowering system ● Variable swing priority system ● Swing rebound prevention system
NEXT-3E Technology Total Tuning Through Advanced ITCS Control The next-generation engine control is governed by a new version of ITCS, which responds quickly to sudden changes in hydraulic load to ensure that the engine runs as efficiently as possible with a minimum of wasted output. ITCS (Intelligent Total Control System) is an advanced, computerized system that provides comprehensive control of all machine functions.
4
The GEOSPEC Difference:
The Value and Quality of Sturdy Construction! Stable Attachment Strength Forged and cast components are used throughout. The arm tip's cross-sectional coefficient is 15 % higher that previous models, giving the arm the same strength as the 3-faced reinforced arm that was offered only as an option before. The strength of the boom foot has also been increased by 18 %.
Integrated cast steel boom top
Pre-air cleaner (optional)
Forged steel arm foot boss
Cast steel boom foot boss
15 %
Enhanced Upper Carbody Strength The structure of the lower portion of the upper frame has been reassessed and the undercover area has been minimized. Also, the side deck’s cross-sectional strength has been boosted by 50 %. Photos in this catalog are the optional specs with 0.93 m3 bucket and 800 mm shoes.
5
strength up around arm top section
Durability That Retains Machine Value Five and Ten Years in the Future ● New operator’s seat covered in durable material ● High-quality urethane paint ● Easily repaired bolted hand rails
Reliability, Durability, Environmental Responsibility Emergency Acceleration (Dial) Permits Continued Operation in the Unlikely Event of Malfunction
The GEOSPEC Difference:
If unexpected trouble is experienced with the ITCS mechatronic control system, the machine can still be operated using the emergency acceleration system. Digging modes are also automatically relayed to an emergency system so that digging can continue temporarily until a service person arrives to repair the primary system.
Designed for the Environment and the Future! Auto Idle Stop Provided as Standard Equipment
Engine throttle Mechatronic controller
Engine Pump Engine ECU
Emergency acceleration
Newly designed MCU alignment and sealed cover gives better protection from water and dust ● Integration in base plate boosts assembly quality ● Reliable fixture to base plate
New MCU
Conventional MCU
Countermeasures Against Electrical System Failure All elements of the electrical system, including controller, have been designed for enhanced reliability.
This function saves fuel and cuts emissions by shutting down the engine automatically when the machine is on stand by. It also stops the hourmeter, which helps to retain the machine’s asset value.
Automatic Acceleration/Deceleration Function Reduces Engine Speed Engine speed is automatically reduced when the control lever is placed in neutral, effectively saving fuel and reducing noise and exhaust emissions. The engine quickly returns to full speed when the lever is moved out of neutral.
Engine Speed
● Vertical
Lever Off (Neutral)
Lever On Lever Stroke
Low Noise Level and Mild Sound Quality The electronically controlled common-rail engine has a unique fuel injection system that runs quietly. Also, the hydraulic pumps have been redesigned to produce a more pleasant sound during pressure relief.
Meets EMC (Electromagnetic Compatibility) Standards in Europe. Measures have been taken to ensure that the GEOSPEC machines do not cause electro-magnetic interference.
6
The GEOSPEC Difference:
“On the Ground” Maintenance! Comfortable "On the Ground" Maintenance
1
The machine layout was designed with easy inspection and maintenance in mind.
Access through the
right side cover
A new fuel filter has been installed that can handle the most punishing conditions. It now has two pre-fuel filters (with built-in water separators), and a highgrade main fuel filter with an ultra-fine 2 micron mesh that removes 95% of dust and other impurities in the fuel.
7 2
8
Main fuel filter
Engine Oil Filter Pre-fuel filter (with built-in water separators)
Main fuel filter
Quick Oil Drain Valves for Quick Maintenance 1
A quick drain valve, which requires no tools, is provided as standard equipment.
2
To facilitate fuel tank cleaning, the fuel drain valve was made larger and fitted with a flange on the bottom.
Quick drain valve
Fuel drain valve
More Efficient Maintenance Inside the Cab Drain Detachable type
3
● Detachable two-
piece floor mat with handles for easy removal. A floor drain is located under the mat.
7
4
● Easy-access fuse
box. More finely differentiated fuses make it easier to locate malfunctions.
5
6
● Air conditioner filter
● Hour meter can be
can be easily removed without tools for cleaning.
checked while standing on the ground.
7
● Large-capacity tool
box can hold up to three pails.
8
● Special crawler frame design is easily
cleaned of mud.
Maintenance
Access through the
left side cover
Highly Durable Super-fine Filter The high-capacity hydraulic oil filter incorporates glass fiber with superior cleaning power and durability. With a replacement cycle of 1,000 hours and a construction that allows replacement of the filter element only, it’s both highly effective and highly economical.
Parallel Cooling Units Are Easy to Clean
● Super-fine filter
Double-Element Air Cleaner as Standard
3 4
The large-capacity element features a double-filter structure that keeps the engine running clean even in dusty environments.
5 6
Oil cooler
Radiator
Intercooler
Air conditioner condenser
Air cleaner (double element)
Monitor Display with Essential Information for Accurate Maintenance Checks ● Displays only the maintenance information that’s
needed, when it’s needed. function that provides earlywarning detection and display of electrical system malfunctions. ● Record previous breakdowns, including irregular and transient malfunctions. ● Self-diagnostic
Choice of 16 Languages for Monitor Display With messages including those requiring urgent action displayed in the local language, users in all parts of the world can work with greater peace of mind.
Chinese
German
English
English (US)
French
Indonesian
ISO
Italian
Japanese
Malay
Myanmar (Brumee) Portuguese
Spanish
Tamil
Thai
Vietnamese
Photos in this catalog are the optional specs with 0.93 m3 bucket and 800 mm shoes.
8
The GEOSPEC Difference:
Designed from the Operator’s Point of View Wide Field of View Liberates the Operator The front field of view easily clears ISO standards, while the peripheral view reduces blind spots to a minimum.
● A long wiper covers a wide area for a broad view in bad weather. ● Back mirrors provide a safe view of the rear. ● Reinforced green glass windows meet European standards.
Wide-Access Cab Ensures Smooth Entry and Exit
+35mm
The left control box lifts up with the safety lock lever to add 10° to the cab entry angle for easy entrance and exit.
10°
Photos in this catalog are the optio
Plenty of Foot Room
Creating a Comfortable Operating Environment
With a total width of 1,005 mm, the cab has 35 mm more frontto-back foot room than previous models. The travel pedal is larger for greater operator comfort.
Reduced Vibration for Fatigue-Free Operation The rigid cab construction and liquid-filled viscous cab mounts minimize cab vibration. In addition, the use of new lower rollers on the crawlers cuts travel vibration in half compared with previous models.
In-Cab Noise is Reduced by 3dB Compared with Previous Models. ●Seat can be reclined to horizontal position
9
Comfort and Safety Newly Designed Information Display Prioritizes Visual Recognition The analog gauge provides information that’s easy to read regardless of the operating environment. The information display screen has been enlarged, and a visor is attached to further enhance visibility.
The GEOSPEC Difference:
Imagining Possible Scenarios and Preparing in Advance Bracket for Attaching a Head Guard Provided as Standard Equipment A bracket is provided as standard equipment that allows the optional head guard to be simply bolted on.
Safety Features That Take Various Scenarios into Consideration
● Firewall separates the pump
● Hammer for emergency exit
compartment from the engine
● Swing
flashers/rear working
lights ● Thermal guard prevents contact with hot components during engine
inspections ● Hand rails meet European standards ● Retractable seatbelt requires no manual adjustment
Optional Features That Further Enhance Safety
onal specs with 0.93 m3 bucket and 800 mm shoes. Bucket is the optional semi HD bucket. ● ● ● ●
Cab working light Rearview camera and monitor Yellow swing rotary light Travel alarm
● Fire extinguisher ● One-way call
Photos in this catalog are the optional specs with 0.93 m3 bucket and 800 mm shoes.
● Double slide seat
● Powerful
automatic air ● Spacious luggage tray conditioner ● Two-speaker FM radio
with station select (Optional) ● New interior design and materials create an elegant feel
● One-touch lock release ● Large cup holder
simplifies opening and closing the front window
10
Specifications Engine
Travel System
Model
HINO J05E Direct injection, water-cooled, 4-cycle diesel engine with turbocharger, intercooler 4 112 mm X 130 mm 5.123 L 118 kW/ 2,000 min-1 (ISO14396:2002) 114 kW/2,000 min-1 (ISO9249:2007)* 592 N•m/1,600 min-1 (ISO14396:2002) 572 N•m/1,600 min-1 (ISO9249:2007)*
Type No. of cylinders:: Bore and stroke: Displacement: Rated power output: Max. torque:
Travel motors: Travel brakes: Parking brakes:
2 X axial-piston, two-step motors Hydraulic disc brake Oil disc brake per motor 46 each side (SK200) 49 each side (SK210LC) 6.0/3.6 km/h 229 kN {23.3 tf} (SAE J 1309) 70 % {35°} 450 mm
Travel shoes: Travel speed: Drawbar pulling force: Gradeability: Ground clearance:
*Previous indication
Cab & Control
Hydraulic System
Cab All-weather, sound-suppressed steel cab mounted on the silicon-sealed viscous mounts and equipped with a heavy, insulated floor mat. Control Two hand levers and two foot pedals for travel Two hand levers for excavating and swing Electric rotary-type engine throttle
Pump Type: Max. discharge flow: Relief valve setting Boom, arm and bucket: Power Boost: Travel circuit: Swing circuit: Control circuit: Pilot control pump: Main control valves: Oil cooler:
Two variable displacement pumps + 1 gear pump 2 X 220 L/min, 1 X 20 L/min 34.3 MPa {350 kgf/cm2} 37.8 MPa {385 kgf/cm2} 34.3 MPa {350 kgf/cm2} 29.0 MPa {296 kgf/cm2} 5.0 MPa {50 kgf/cm2} Gear type 8-spool Air cooled type
Boom, Arm & Bucket Boom cylinders: Arm cylinder: Bucket cylinder:
Refilling Capacities & Lubrications
Swing System Swing motor: Brake: Parking brake: Swing speed: Tail swing radius: Min. front swing radius:
120 mm X 1,355 mm 135 mm X 1,558 mm 120 mm X 1,080 mm
Axial-piston motor Hydraulic; locking automatically when the swing control lever is in the neutral position Hydraulic disc brake 12.5 min-1 {rpm} 2,750 mm 3,540 mm
Fuel tank: Cooling system: Engine oil: Travel reduction gear: Swing reduction gear:
370 L 22 L 22 L 2 X 5.3 L 3.0 L
Hydraulic oil tank:
146 L tank oil level 230 L hydraulic system
Attachments Backhoe bucket and arm combination Backhoe bucket Normal digging
Light-duty
Heavy digging
Slope finishing bucket
Use —
Bucket capacity
Opening width
No. of bucket teeth Bucket weight
0.8 0.59
0.93 0.67
1.05 0.75
1.3 0.9
0.8 0.59
— —
With side cutters
mm
1,160
1,300
1,460
—
1,180
—
Without side cutters
mm
1,060
1,200
1,360
1,630
1,060
2,200 X 1,100
kg
5 730
5 790
6 770
6 820
4 750
— 890
○ ○
◎ 2.40 m short arm ○ ◎ 2.94 m standard arm 3.50 m long arm ◎ Standard ○ Recommend △ Loading only × Not recommended
Combinations
11
m3 m3
ISO heaped Struck
SK200-8
SK210LC-8
Working Ranges Boom
5.65 m Arm
Short 2.4 m
Standard 2.94 m
Long 3.5 m
9.42
9.9
10.34
b- Max. digging reach at ground level
9.24
9.73
10.17
cdef-
6.16 9.51 6.68 2.98
6.7 9.72 6.91 2.43
7.26 9.75 6.97 1.87
Range a- Max. digging reach
a b h 11 m 10 9
Max. digging depth Max. digging height Max. dumping clearance Min. dumping clearance
g- Max. vertical wall digging depth
5.57
6.1
6.47
h- Min. swing radius
3.56
3.54
3.48
i - Horizontal digging stroke at ground level
4.08
5.27
6.08
j - Digging depth for 2.4 m (8') flat bottom
5.95
6.52
7.08
Bucket capacity ISO heaped m3
0.93
0.8
0.7
8 7 6 5
d
4 e
3 2 f
1 0 1
i
2
Digging Force (ISO 6015)
Unit: kN (tf) Short 2.4 m
Arm length
Standard 2.94 m
c
j
3
g
4
Long 3.5 m
Bucket digging force
143 {14.6} 157 {16.0}*
143 {14.6} 157 {16.0}*
143 {14.6} 157 {16.0}*
Arm crowding force
121 {12.3} 133 {13.6}*
102 {10.4} 112 {11.4}*
91.8 {9.36} 101 {10.3}
5 6 7 8m
60)
11 10
9
8
7
6
5
4
3
2
1m
*Power Boost engaged. Short Arm Standard Arm Long Arm
Dimensions Arm length
Short 2.4 m
Standard 2.94 m
Long 3.5 m
A Overall length
9,530
9,450
9,520
B
Overall height (to top of boom)
SK200 SK210LC D Overall height (to top of cab) E Ground clearance of rear end* F Ground clearance* C Overall width
3,160
2,980
3,180
2,800 2,990 3,030 1,060 450
2,800 2,990 3,030 1,060 450
2,800 2,990 3,030 1,060 450
G Tail swing radius G’
Distance from center of swing to rear end
H Tumbler distance I
Overall length of crawler
J Track gauge
SK200 SK210LC SK200 SK210LC SK200 SK210LC
K Shoe width L Overall width of upperstructure
2,750
2,750
Unit: mm 2,750
2,750
2,750
2,750
3,370 3,660 4,170 4,450 2,200 2,390
3,370 3,660 4,170 4,450 2,200 2,390 600/700/800/900 2,710
3,370 3,660 4,170 4,450 2,200 2,390
2,710
2,710
* Without including height of shoe lug.
A
L G, G’
D
B
E F H I
J C
K
Operating Weight & Ground Pressure In standard trim, with standard boom, 2.94 m arm, and 0.8 m3 ISO heaped bucket Shaped Shoe width
mm
Overall width
mm
Ground pressure
kPa (kgf/cm2)
Operating weight
kg
SK200 SK210LC SK200 SK210LC SK200 SK210LC
600 2,800 2,990 46 {0.47} 43 {0.44} 20,400 20,900
Triple grouser shoes (even height) 700 2,900 3,090 40 {0.40} 38 {0.38} 20,800 21,200
800 3,000 3,190 35 {0.36} 33 {0.34} 21,000 21,400
Triangle shoe 900 3,100 3,290 32 {0.32} 30 {0.31} 21,200 21,600
12
Lifting Capacities
A - Reach from swing centerline to bucket hook B - Bucket hook height above/below ground C - Lifting capacities in kilograms • Max. discharge pressure: 34.3 MPa (350 kg/cm2)
Rating over front
Rating over side or 360 degrees
SK200 A
Standard Arm: 2.94 m Bucket: 0.8 m3 ISO heaped 730 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m
6.0 m
7.5 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m
kg kg kg kg kg kg kg kg kg
SK200 A
*6,510 *10,110
*6,510 *10,110
*11,950 *6,280 *7,290 *10,490 *13,520 *10,470
*11,950 *6,280 *7,290 10,470 10,650 *10,470
*7,540 *9,190 9,380 9,240 9,280 *7,450
6,400 5,830 5,480 5,360 5,400 5,590
Standard Arm: 2.94 m Bucket: 0.8 m3 ISO heaped 730 kg Shoe: 800 mm 1.5 m 3.0 m 4.5 m
*5,050 *5,850 6,100 5,870 5,760 5,780
4,300 4,030 3,760 3,560 3,460 3,480
6.0 m
*2,680 4,530 4,400 4,250 4,130 4,080
*2,680 2,880 2,750 2,620 2,510 2,460
7.5 m
*2,780 *2,620 *2,620 *2,750 *3,010 3,460 3,780 4,520 *5,470
*2,780 *2,620 2,420 2,160 2,060 2,090 2,280 2,740 3,920
6.44 m 7.51 m 8.17 m 8.51 m 8.58 m 8.38 m 7.89 m 7.05 m 5.70 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m
kg kg kg kg kg kg kg kg kg
SK200 A
*6,510 *10,110
*6,510 *10,110
*11,950 *6,280 *7,290 *10,490 *13,520 *10,470
*11,950 *6,280 *7,290 *10,490 10,980 *10,470
*7,540 *9,190 9,700 9,560 *9,380 *7,450
6,580 6,010 5,670 5,540 5,580 5,780
Short Arm: 2.4 m Bucket: 0.93 m3 ISO heaped 790 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m
*5,050 *5,850 6,310 6,080 5,980 5,990
4,430 4,160 3,890 3,690 3,590 3,600
6.0 m
*2,680 *4,600 4,560 4,410 4,290 4,240
*2,680 2,970 2,850 2,710 2,600 2,560
7.5 m
*2,780 *2,620 *2,620 *2,750 *3,010 *3,470 3,920 4,690 *5,470
*2,780 *2,620 2,510 2,240 2,140 2,170 2,370 2,850 4,050
6.44 m 7.51 m 8.17 m 8.51 m 8.58 m 8.38 m 7.89 m 7.05 m 5.70 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m
13
kg kg kg kg kg kg kg kg kg
*7,190 *12,030
*7,190 *12,030
*6,370 *11,290 *12,250 *8,650
*6,370 10,490 10,730 *8,650
*6,500 *8,170 9,580 9,270 9,200 *8,810 *6,230
*6,500 6,170 5,650 5,380 5,330 5,430 5,710
*4,980 *5,450 *6,190 6,000 5,810 5,740 5,820
4,350 4,180 3,920 3,670 3,500 3,440 3,510
4,430 4,320 4,190 4,100
2,780 2,680 2,560 2,480
*4,120 *3,870 *3,890 3,830 3,690 3,790 4,200 5,210 *5,480
*4,120 3,280 2,660 2,350 2,240 2,280 2,530 3,160 4,960
5.77 m 6.95 m 7.66 m 8.03 m 8.10 m 7.89 m 7.36 m 6.45 m 4.94 m
SK200-8
SK210LC A
Standard Arm: 2.94 m Bucket: 0.8 m3 ISO heaped 730 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m
6.0 m
7.5 m
SK210LC-8
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m
kg kg kg kg kg kg kg kg kg
SK210LC A
*6,510 *10,110
*6,510 *10,110
*11,950 *6,280 *7,290 *10,490 *13,520 *10,470
*11,950 *6,280 *7,290 *10,490 12,300 *10,470
*7,540 *9,190 *10,100 *10,160 *9,380 *7,450
*5,050 *5,850 *6,680 6,720 6,610 6,630
7,160 6,570 6,220 6,090 6,130 6,330
Standard Arm: 2.94 m Bucket: 0.8 m3 ISO heaped 730 kg Shoe: 800 mm 1.5 m 3.0 m 4.5 m
4,780 4,510 4,230 4,020 3,920 3,940
6.0 m
*2,680 *4,600 4,990 4,840 4,720 4,660
*2,680 3,220 3,090 2,950 2,840 2,800
7.5 m
*2,780 *2,620 *2,620 *2,750 *3,010 *3,470 *4,290 5,160 *5,470
*2,780 *2,620 *2,620 2,440 2,330 2,370 2,590 3,110 4,420
6.44 m 7.51 m 8.17 m 8.51 m 8.58 m 8.38 m 7.89 m 7.05 m 5.70 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m
kg kg kg kg kg kg kg kg kg
SK210LC A
*6,510 *10,110
*6,510 *10,110
*11,950 *6,280 *7,290 *10,490 *13,520 *10,470
*11,950 *6,280 *7,290 *10,490 12,700 *10,470
*7,540 *9,190 *10,100 *10,160 *9,380 *7,450
7,370 6,780 6,430 6,310 6,350 6,550
Short Arm: 2.4 m Bucket: 0.93 m3 ISO heaped 790 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m
*5,050 *5,850 *6,680 6,970 6,860 *6,840
4,930 4,650 4,370 4,170 4,070 4,080
6.0 m
*2,680 *4,600 *5,000 5,020 4,900 4,850
*2,680 3,330 3,200 3,060 2,950 2,910
7.5 m
*2,780 *2,620 *2,620 *2,750 *3,010 *3,470 *4,290 5,360 *5,470
*2,780 *2,620 *2,620 2,540 2,430 2,470 2,690 3,230 4,580
6.44 m 7.51 m 8.17 m 8.51 m 8.58 m 8.38 m 7.89 m 7.05 m 5.70 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m
kg kg kg kg kg kg kg kg kg
*7,190 *12,030
*7,190 *12,030
*6,370 *11,290 *12,250 *8,650
*6,370 *11,290 *12,250 *8,650
*6,500 *8,170 *9,600 *10,180 *9,920 *8,810 *6,230
*6,500 6,920 6,390 6,110 6,060 6,160 *6,230
Notes:
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Bucket lift hook defined as lift point. 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed
*4,980 *5,450 *6,190 6,850 6,660 6,590 *6,390
4,830 4,650 4,390 4,130 3,960 3,900 3,970
*4,720 4,910 4,780 4,680
3,120 3,020 2,900 2,810
*4,120 *3,870 *3,890 *4,090 4,210 4,330 4,800 *5,700 *5,480
*4,120 3,660 2,990 2,660 2,540 2,600 2,880 3,570 *5,480
5.77 m 6.95 m 7.66 m 8.03 m 8.10 m 7.89 m 7.36 m 6.45 m 4.94 m
87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
14
SK200-8
SK210LC-8
STANDARD EQUIPMENT ENGINE ■ Engine, HINO J05E, Diesel engine with turbocharger and intercooler ■ Automatic engine deceleration ■ Auto Idle Stop (AIS) ■ Batteries (2 x 12V - 96Ah) ■ Starting motor (24V - 5 kW), 50 amp alternator ■ Removable clean-out screen for radiator ■ Automatic engine shut-down for low engine oil pressure ■ Engine oil pan drain valve ■ Double element air cleaner CONTROL ■ Working mode selector (H-mode and S-mode) ■ Power Boost SWING SYSTEM & TRAVEL SYSTEM ■ Swing rebound prevention system ■ Straight propel system ■ Two-speed travel with automatic shift down ■ Sealed & lubricated track links ■ Grease-type track adjusters ■ Automatic swing brake HYDRAULIC ■ Arm regeneration system ■ Aluminum hydraulic oil cooler MIRRORS & LIGHTS ■ Two rearview mirrors ■ Two front and two rear working lights ■ Swing flashers
CAB & CONTROL ■ Two control levers, pilot-operated ■ Tow eyes ■ Horn, electric ■ Integrated left-right slide-type control box ■ Cab, all-weather sound suppressed type ■ Ashtray ■ Cigarette lighter ■ Cab light (interior) ■ Coat hook ■ Luggage tray ■ Large cup holder ■ Detachable two-piece floor mat ■ Double slide seat ■ Retractable seatbelt ■ Headrest ■ Handrails ■ Heater and defroster ■ Intermittent windshield wiper with double-spray washer ■ Skylight ■ Tinted safety glass ■ Pull-type front window and removable lower front window ■ Easy-to-read multi-display monitor ■ Automatic air conditioner ■ Emergency escape hammer
OPTIONAL EQUIPMENT ■ Radio, AM/FM Stereo with speakers ■ Wide range of buckets ■ Various optional arms ■ Wide range of shoes ■ Travel alarm ■ Boom safety valve
■ Arm safety valve ■ 7-way adjustable suspension seat ■ Front-guard protective structures ■ Additional hydraulic circuit ■ Pre-air cleaner
Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for specifics.
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. Inquiries To: 17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135 www.kobelco-kenki.co.jp/english_index.html
Bulletin No. ACERA GEOSPEC SUPER SK200/SK210LC-SEASIA-2-102 2009082000 Printed in Japan
ACERA GEOSPEC SK330/350LC SK330-8
SK350LC-8
STANDARD EQUIPMENT ENGINE ■ Engine, HINO J08E, Diesel engine with turbocharger and intercooler ■ Automatic engine deceleration ■ Auto Idle Stop (AIS) ■ Batteries (2 x 12V - 96Ah) ■ Starting motor (24V - 5 kW), 50 amp alternator ■ Removable clean-out screen for radiator ■ Automatic engine shut-down for low engine oil pressure ■ Engine oil pan drain valve ■ Double element air cleaner CONTROL ■ Working mode selector (H-mode and S-mode) ■ Power Boost SWING SYSTEM & TRAVEL SYSTEM ■ Swing rebound prevention system ■ Straight propel system ■ Two-speed travel with automatic shift down ■ Sealed & lubricated track links ■ Grease-type track adjusters ■ Automatic swing brake HYDRAULIC ■ Arm regeneration system ■ Auto warm up system ■ Aluminum hydraulic oil cooler MIRRORS & LIGHTS ■ Two rearview mirrors ■ Three front and two rear working lights ■ Swing flashers
Hydraulic Excavators CAB & CONTROL ■ Two control levers, pilot-operated ■ Tow eyes ■ Horn, electric ■ Integrated left-right slide-type control box ■ Cab, all-weather sound suppressed type ■ Ashtray ■ Cigarette lighter ■ Cab light (interior) ■ Coat hook ■ Luggage tray ■ Large cup holder ■ Detachable two-piece floor mat ■ 7-way adjustable suspension seat ■ Retractable seatbelt ■ Headrest ■ Handrails ■ Heater and defroster ■ Intermittent windshield wiper with double-spray washer ■ Skylight ■ Tinted safety glass ■ Pull-type front window and removable lower front window ■ Easy-to-read multi-display monitor ■ Automatic air conditioner ■ Emergency escape hammer ■ Suspension seat
■ Bucket Capacity:
1.2 –2.3 m3 ISO heaped ■ Engine Power:
200 kW {271 PS} /2,100 min-1{rpm} (ISO14396)
■ Operating Weight:
OPTIONAL EQUIPMENT ■ Wide range of buckets ■ Various optional arms ■ Wide range of shoes ■ Front-guard protective structures ■ Additional track guide ■ Additional hydraulic circuit
■ Arm rest ■ Additional cownterweight ■ Multi-control valve ■ Rain visor ■ Radio, AM/FM Stereo with speakers (Indonesia, Vietnam, Malaysia)
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. Inquiries To: 17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135 www.kobelco-kenki.co.jp/english_index.html
Bulletin No. ACERA GEOSPEC SK330/SK350LC-SEASIA-2-101 2009115000 Printed in Japan
33,700 kg–SK330 34,400 kg–SK350LC
The Power Wave of Change Pursuing the “Three E’s” The Perfection of Next-Generation, Network Performance
Enhancement Greater Performance Capacity ●New hydraulic circuitry minimizes pressure loss ●High-efficiency, electronically controlled
Common Rail Fuel Injection Engine travel and arm/bucket digging force
●Powerful
Economy Improved Cost Efficiency ●Advanced
power plant that reduces fuel consumption ●Easy maintenance that reduces upkeep costs ● High structural durability and reliability that retain machine value longer
Environment Features That Go Easy on the Earth ●Auto Idle Stop as standard equipment ●Noise reduction measures (with improvement
Announcing ACERA GEOSPEC and the Concept of Beautiful Performance.
of the sound quality) minimize noise and vibration
When we set out to design our new hydraulic excavators, we kept our eyes on the big picture. Of course we wanted machines with greater digging capacity. But they also had to be fuel-efficient and economical, while imposing less of a burden on the local and global environments. Applying our advanced technologies, we developed KOBELCO's new ACERA GEOSPEC series, an entirely new kind of excavator that beautifully balances all the demands of today's construction industry. Lean and efficient with capacity to spare, these sleek powerhouses bring a whole new style to the worksite while setting new standards for environmental responsibility.
ACERA GEOSPEC The “GEO” in GEOSPEC expresses our deep respect for our planet, and for the solid ground where excavators are in their element. This is accompanied by SPEC, which refers to the performance specifications needed to get the job done efficiently as we carry on the tradition of the urban-friendly ACERA series.
1
2
Performance
The GEOSPEC Difference:
NEXT-3E Technology Next-Generation Electronic Engine Control
Efficient Performance!
The high-pressure, common-rail fuel-injection engine features adjustable control to maximize fuel efficiency and provide powerful medium/low-speed torque. The result is a highly fuelefficient engine.
Amazing Productivity with a 27 % Increase in Work Volume and “Top-Class” Cost-Performance
H H-Mode
Work Volume *
27 %
S
increase in work volume using the same amount of fuel. (H-Mode)
S-Mode
decrease in fuel consumption even when performing more work volume. (S-Mode)
Max. arm crowding force with power boost: Max. bucket digging force: Max. bucket digging force with power boost:
For normal operations with lower fuel consumption.
Attachment Mode Selector Switch There's a choice of three different hydraulic circuits, to accommodate bucket, crusher or breaker, and the desired attachment mode can be selected with a switch, which automatically configures the selector valve. All attachment modes can be used in either Smode or H-mode.
“Top-Class” Powerful Digging Max. arm crowding force:
For heavy duty when a higher performance level is required.
Optional N&B (crusher and breaker) The operator selects the desired mode from inside the cab, and the selector valve automatically configures the machine accordingly.
Fuel Consumption*
18 %
Simple Select: Two Digging Modes
165 kN {16.8 tf} 181 kN {18.5 tf} 222 kN {22.6 tf} 244 kN {24.9 tf}
Powerful Travel Travel torque: increased by Drawbar pulling force:
13 % 322 kN {32.8 tf}
Seamless, Smooth Combined Operations The GEOSPEC machines have inherited the various systems that make inching and combined operations easy and accurate, with further refinements that make a good thing even better. Leveling and other combined operations can be carried out with graceful ease.
Greater Swing Power, Shorter Cycle Times Swing torque: increased by Swing speed:
7% 16 %
● Electronic Active Control System ● Arm regeneration system ● Boom lowering system ● Variable swing priority system ● Swing rebound prevention system
faster (10.0 min-1) Significant Extension of Continuous Working Hours The combination of a large-capacity fuel tank and excellent fuel efficiency delivers an impressive 22% increase in continuous operation hours.**
Fuel tank:
580L
22 %
Light Lever Operation It takes 10% less effort to move the control levers, so that operators can work longer hours with less fatigue.
10 % Less
NEXT-3E Technology New Hydraulic System Rigorous inspections for pressure loss are performed on all components of the hydraulic piping, from the first spool of the control valve to the connectors. This regimen, combined with the use of a new, highefficiency pump, cuts energy loss to a minimum.
*The value shows results from actual measurements taken by KOBELCO when compared with previous KOBELCO models. **The value shows results from actual measurements taken by KOBELCO for continuous operation in S Mode, compared with previous models. Results vary depending on the method of operation and load conditions.
3
NEXT-3E Technology Total Tuning Through Advanced ITCS Control The next-generation engine control is governed by a new version of ITCS, which responds quickly to sudden changes in hydraulic load to ensure that the engine runs as efficiently as possible with a minimum of wasted output. ITCS (Intelligent Total Control System) is an advanced, computerized system that provides comprehensive control of all machine functions.
4
Reliability, Durability, Environmental Responsibility
The GEOSPEC Difference:
The Value and Quality of Sturdy Construction! Stable Attachment Strength
The GEOSPEC Difference: Designed for the Environment and the Future!
Emergency Acceleration (Dial) Permits Continued Operation in the Unlikely Event of Malfunction
Forged and cast steel components are used throughout. The standard arm and boom also meet specifications that were classified as “reinforced” on previous KOBELCO models to ensure reliable strength.
If unexpected trouble is experienced with the ITCS mechatronic control system, the machine can still be operated using the emergency acceleration system. Digging modes are also automatically relayed to an emergency system so that digging can continue temporarily until a service person arrives to repair the primary system.
Pre-air Cleaner (optional) The optional pre-air cleaner prolongs a replacement cycle of main air cleaner.
Auto Idle Stop Provided as Standard Equipment
Integrated cast steel boom top
HD boom Engine throttle Mechatronic controller
Engine Pump
Emergency acceleration
Newly designed MCU ● Vertical
alignment and sealed cover gives better protection from water and dust ● Integration in base plate boosts assembly quality ● Reliable fixture to base plate
Forged steel arm foot boss Cast steel boom foot boss
HD arm
New MCU
Conventional MCU
Countermeasures Against Electrical System Failure All elements of the electrical system, including controller, have been designed for enhanced reliability.
This function saves fuel and cuts emissions by shutting down the engine automatically when the machine is on stand by. It also stops the hourmeter, which helps to retain the machine’s asset value.
Automatic Acceleration/Deceleration Function Reduces Engine Speed Engine speed is automatically reduced when the control lever is placed in neutral, effectively saving fuel and reducing noise and exhaust emissions. The engine quickly returns to full speed when the lever is moved out of neutral.
Engine Speed
ENGINE ECU
Lever Off (Neutral)
Lever On Lever Stroke
Large-Capacity Pump Resists Overheating The pump capacity has been increased by compared with previous models.
22 % ●Reinforced arm
Low Noise Level and Mild Sound Quality The electronically controlled common-rail engine has a unique fuel injection system that runs quietly. Also, the hydraulic pumps have been redesigned to produce a more pleasant sound during pressure relief. In short, the GEOSPEC series meets all requirements cited in latest EU stage II.
Meets EMC (Electromagnetic Compatibility) Standards in Europe. Measures have been taken to ensure that the GEOSPEC machines do not cause electromagnetic interference.
Enhanced Upper Carbody Strength The structure of the lower portion of the upper frame has been reassessed and the undercover area has been minimized for further strength.
5
Durability That Retains Machine Value Five and Ten Years in the Future ●New operator’s seat covered in durable, material ●High-quality urethane paint ●Easily repaired bolted hand rails
6
Maintenance
The GEOSPEC Difference:
Highly Durable Super-fine Filter
“On the Ground” Maintenance!
Access through the
left side cover
The high-capacity hydraulic oil filter incorporates glass fiber with superior cleaning power and durability. With a replacement cycle of 1,000 hours and a construction that allows replacement of the filter element only, it’s both highly effective and highly economical.
Parallel Cooling Units Are Easy to Clean Comfortable "On the Ground" Maintenance
1
The machine layout was designed with easy inspection and maintenance in mind.
● Super-fine filter
Double-Element Air Cleaner as Standard The large-capacity element features a double-filter structure that keeps the engine running clean even in dusty environments.
3 4
Oil cooler
5
Air cleaner (double element)
6 Access through the
right side cover
A new fuel filter has been installed that can handle the most punishing conditions. It now has two pre-fuel filters (with built-in water separators), and a highgrade main fuel filter with an ultra-fine 2 micron mesh that removes 95% of dust and other impurities in the fuel.
Radiator
Air conditioner condenser
Intercooler
Monitor Display with Essential Information for Accurate Maintenance Checks ● Displays only the maintenance information that’s
needed, when it’s needed. function that provides earlywarning detection and display of electrical system malfunctions. ● Record previous breakdowns, including irregular and transient malfunctions. ● Self-diagnostic
7 2
Choice of 16 Languages for Monitor Display With messages including those requiring urgent action displayed in the local language, users in all parts of the world can work with greater peace of mind.
8
Main fuel filter
Engine Oil Filter Pre-fuel filter (with built-in water separators)
Main fuel filter
Chinese
German
English
English (US)
French
Indonesian
ISO
Italian
Japanese
Malay
Myanmar(Brumese) Portuguese
Spanish
Tamil
Thai
Quick Oil Drain Valves for Quick Maintenance 1
A quick drain valve, which requires no tools, is provided as standard equipment.
Quick drain valve
2
To facilitate fuel tank cleaning, the fuel drain valve was made larger and fitted with a flange on the bottom.
Vietnamese
Fuel drain valve
More Efficient Maintenance Inside the Cab Drain Detachable type
3
● Detachable two-
piece floor mat with handles for easy removal. A floor drain is located under the mat.
7
4
● Easy-access fuse
box. More finely differentiated fuses make it easier to locate malfunctions.
5
6
● Air conditioner filter
● Hour meter can be
can be easily removed without tools for cleaning.
checked while standing on the ground.
7
● Large-capacity tool
box can hold up to three pails.
8
● Special crawler frame design is easily
cleaned of mud.
8
Comfort and Safety
The GEOSPEC Difference:
Designed from the Operator’s Point of View
Newly Designed Information Display Prioritizes Visual Recognition The analog gauge provides information that’s easy to read regardless of the operating environment. The information display screen has been enlarged, and a visor is attached to further enhance visibility.
The GEOSPEC Difference: Imagining Possible Scenarios and Preparing in Advance Bracket for Attaching a Head Guard Provided as Standard Equipment
Wide Field of View Liberates the Operator
A bracket is provided as standard equipment that allows the optional head guard to be simply bolted on.
The front field of view easily clears ISO standards, while the peripheral view reduces blind spots to a minimum.
Safety Features That Take Various Scenarios into Consideration
● Firewall separates the pump
● Hammer for emergency exit
compartment from the engine
●A long wiper covers a wide area for a broad view in bad weather. ●Back mirrors provide a safe view of the rear. ●Reinforced green glass windows meet European standards.
Wide-Access Cab Ensures Smooth Entry and Exit
● Swing
+35 mm
The left control box lifts up with the safety lock lever to add 10° to the cab entry angle for easy entrance and exit.
flashers/rear working
lights ● Thermal guard prevents contact with hot components during engine
inspections ● Hand rails meet European standards ● Retractable seatbelt requires no manual adjustment
10° Photo includes optional pedals for N&B and rotation.
Plenty of Foot Room
Creating a Comfortable Operating Environment
With a total width of 1,005 mm, the cab has 35 mm more frontto-back foot room than previous models. The travel pedal is larger for greater operator comfort.
Reduced Vibration for Fatigue-Free Operation ● Double slide and suspen- ● Powerful
The rigid cab construction and liquid-filled viscous cab mounts minimize cab vibration. In addition, the use of new lower rollers on the crawlers cuts travel vibration in half compared with previous models.
sion seat
automatic air ● Spacious luggage tray conditioner ● New interior design and
materials create an elegant feel
In-Cab Noise is Reduced by 4dB Compared with Previous Models. ●Seat can be reclined to horizontal position
9
● One-touch lock release ● Large cup holder
simplifies opening and closing the front window
10
Specifications
SK330-8
Engine
Working Ranges
Travel System
Model
HINO J08E Direct injection, water-cooled, 4-cycle diesel engine with turbocharger, intercooler 6 112 mm X 130 mm 7.684 L 200 kW/2,100 min-1 (ISO14396:2002)* 188 kW/2,100 min-1 (ISO9249:2007) 998 N•m/1,600 min-1 (ISO14396:2002)* 969 N•m/1,600 min-1 (ISO9249:2007)
Type No. of cylinders:: Bore and stroke: Displacement: Rated power output: Max. torque:
Travel motors: Travel brakes: Parking brakes
Travel speed: Drawbar pulling force: Gradeability: Ground clearance:
*ISO 14396 meets EU regulation
Two variable displacement pumps + 1 gear pump 2 X 294 L/min, 1 X 20 L/min 34.3 MPa {350 kgf/cm2} 37.8 MPa {385 kgf/cm2} 34.3 MPa {350 kgf/cm2} 29.0 MPa {296 kgf/cm2} 5.0 MPa {50 kgf/cm2} Gear type 8-spool Air cooled type
Brake: Parking brake: Swing speed: Tail swing radius: Min. front swing radius:
10.35
10.61
11.26
11.97
b - Max. digging reach at ground level
10.14
10.4
11.06
11.79
cdef-
6.51 10.28 7.05 3.73
6.86 10.26 7.06 3.32
7.56 10.58 7.37 2.62
8.41 10.7 7.53 1.77
5.28
5.84
6.61
7.15
4.48
4.45
4.37
4.43
3.4
4.21
5.82
7.21
6.31
6.67
7.4
8.27
2.3
1.6
1.4
1.2
Axial-piston motor Hydraulic; locking automatically when the swing control lever is in the neutral position Hydraulic disc brake 10.0 min-1 {rpm} 3,500 mm 4,370 mm
Max. digging depth Max. digging height Max. dumping clearance Min. dumping clearance
g - Max. vertical wall digging depth h - Min. swing radius i - Horizontal digging stroke at ground level
a b h
d e f
j - Digging depth for 2.4 m (8') flat bottom Bucket capacity ISO heaped m3
i
Digging Force (ISO 6015)
Unit: kN (tf) Super Short 2.25 m
Arm length
Short 2.6 m
Standard 3.3 m
Long 4.15 m
Bucket digging force
220 {22.4} 241 {24.6}*
221 {22.5} 244 {24.9}*
222 {22.6} 244 {24.9}*
221 {22.5} 243 {24.8}*
Arm crowding force
231 {23.6} 255 {26.0}*
205 {20.9} 225 {22.9}*
165 {16.8} 181 {18.5}*
140 {14.3} 154 {15.7}*
g c j
14 13 12 11 10 9 8 7 6 5 4 3 2 1m
*Power Boost engaged.
140 mm X 1,550 mm 170 mm X 1,788 mm 150 mm X 1,193 mm
Fuel tank: Cooling system: Engine oil: Travel reduction gear: Swing reduction gear:
580 L 31.1 L 28.5 L 2 X 9.5 L 7.4 L
Arm length
Super Short 2.25 m
Short 2.6 m
Standard 3.3 m
Long 4.15 m
A Overall length
11,410
11,280
11,200
11,230
Hydraulic oil tank:
280 L tank oil level 353 L hydraulic system
B
Overall height (to top of boom)
SK330 SK350LC D Overall height (to top of cab) E Ground clearance of rear end* F Ground clearance* C Overall width
12 m 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8m
Super Short Arm Short Arm Standard Arm Long Arm
Dimensions
Refilling Capacities & Lubrications
Swing System Swing motor:
Long 4.15 m
Super Short 2.25 m
Range a - Max. digging reach
Boom, Arm & Bucket Boom cylinders: Arm cylinder: Bucket cylinder:
6.5 m Short Standard 2.6 m 3.3 m
Arm
Cab All-weather, sound-suppressed steel cab mounted on the silicon-sealed viscous mounts and equipped with a heavy, insulated floor mat. Control Two hand levers and two foot pedals for travel Two hand levers for excavating and swing Electric rotary-type engine throttle
Pump
Max. discharge flow: Max. discharge pressure Boom, arm and bucket: Power Boost: Travel circuit: Swing circuit: Control circuit: Pilot control pump: Main control valves: Oil cooler:
Boom
Cab & Control
Hydraulic System Type:
Unit: m
2 X axial-piston, two-step motors Hydraulic brake per motor Oil disc brake per motor 45 each side (SK330) 48 each side (SK350LC) 5.6/3.3 km/h 322 kN (ISO7464) 70 % {35°} 500 mm
Travel shoes:
SK350LC-8
3,760
3,640
3,420
3,590
3,200 3,200 3,160 1,190 500
3,200 3,200 3,160 1,190 500
3,200 3,200 3,160 1,190 500
3,200 3,200 3,160 1,190 500
G Tail swing radius G’
Distance from center of swing to rear end
3,500
3,500
3,500
Unit: mm 3,500
3,500
3,500
3,500
3,500
SK330 SK350LC SK330 SK350LC SK330 SK350LC
3,730 4,050 4,650 4,980 2,600 2,600
3,730 4,050 4,650 4,980 2,600 2,600
K Shoe width L Overall width of upperstructure
2,950
3,730 3,730 4,050 4,050 4,650 4,650 4,980 4,980 2,600 2,600 2,600 2,600 600/800 2,950 2,950
H Tumbler distance I
Overall length of crawler
J Track gauge
2,950
* Without including height of shoe lug.
A L
G, G’
Attachments B
Backhoe bucket and arm combination
D
Backhoe bucket Use Bucket capacity Opening width No. of bucket teeth Bucket weight
Combinations
ISO heaped Struck With side cutter Without side cutter
m3 m3 mm mm
kg 2.25 m super short arm 2.6 m short arm 3.3 m standard arm 4.15 m long arm
Light-duty
F
Heavy digging
1.2 0.84 1,240 1,110 4 930
1.4 1.0 1,420 1,300 5 1,070
1.6 1.2 1,570 1,450 5 1,100
2.3 1.84 1,930 1,760 6 1,500
1.8 1.4 — 1,680 5 1,200
1.4 1.0 1,390 1,330 5 1,300
○ ○ ○ ○
○ ○ ○
○ ○ ○
○
○
○ ○ ○
○ Recommended Loading only Not recommended
11
E
Normal digging
K
H
J
I
C
Operating Weight & Ground Pressure In standard trim, with standard boom, 3.3 m arm, and 1.4 m3 ISO heaped bucket Shaped Shoe width
mm
Triple grouser shoes (even height)
Overall width
mm
Ground pressure
kPa (kgf/cm2)
Operating weight
kg
SK330 SK350LC SK330 SK350LC SK330 SK350LC
600 3,200 3,200 68 {0.70} 64 {0.66} 33,700 34,400
800 3,400 3,400 53 {0.54} 50 {0.51} 34,700 35,500
12
Lifting Capacities
SK330-8
A - Reach from swing centerline to bucket hook B - Bucket hook height above/below ground C - Lifting capacities in kilograms • Max. discharge pressure: 37.8 MPa (385 kgf/cm2)
Rating over front
Rating over side or 360 degrees
3
SK330 A
Standard Arm: 3.3 m Bucket: 1.4 m ISO heaped 1,070 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m 6.0 m
7.5 m
9.0 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg
*12,590 *7,080 *10,390 *10,760 *10,760 *14,890 *15,190 *15,190 *20,250 *20,200 *20,200 *16,970
*12,590 *7,080 *10,390 *14,890 *20,250 *16,970
*7,320 *11,730 *11,730 *8,630 *13,950 12,320 *9,850 *15,020 11,670 *10,670 *15,030 11,460 *10,920 *14,170 11,530 *10,500 *12,270 11,820 *9,150 *8,560 *8,560
*7,320 *8,630 8,010 7,570 7,360 7,340 7,530
*5,640 *5,840 *6,370 *7,070 *7,760 7,930 7,770 7,770
*5,640 *5,840 *6,370 6,030 5,680 5,410 5,260 5,260
*5,840 *6,180 6,110 5,960 5,890
4,570 4,390 4,200 4,050 3,990
*3,650 *3,600 *3,690 *3,920 *4,320 *4,980 5,870 6,740 *7,250 *7,090
*3,650 *3,600 *3,690 3,830 3,680 3,720 3,980 4,580 5,890 *7,090
8.05 m 8.88 m 9.41 m 9.67 m 9.70 m 9.49 m 9.02 m 8.26 m 7.10 m 5.29 m
3
SK330 A
Standard Arm: 3.3 m Bucket: 1.4 m ISO heaped 1,070 kg Shoe: 800 mm 1.5 m 3.0 m 4.5 m 6.0 m
7.5 m
9.0 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg
*12,590 *7,080 *10,390 *10,760 *10,760 *14,890 *15,190 *15,190 *20,250 *20,200 *20,200 *16,970
*12,590 *7,080 *10,390 *14,890 *20,250 *16,970
*7,320 *11,730 *11,730 *8,630 *13,950 12,710 *9,850 *15,020 12,060 *10,670 *15,030 11,850 *10,920 *14,170 11,920 *10,500 *12,270 12,220 *9,150 *8,560 *8,560
*7,320 *8,630 8,280 7,840 7,620 7,610 7,790
*5,640 *5,840 *6,370 *7,070 *7,760 8,220 8,060 *8,040
*5,640 *5,840 *6,370 6,230 5,880 5,610 5,460 5,460
*5,840 *6,180 6,340 6,180 6,120
4,730 4,550 4,360 4,210 4,150
*3,650 *3,600 *3,690 *3,920 *4,320 *4,980 *6,070 *6,990 *7,250 *7,090
*3,650 *3,600 *3,690 *3,920 3,820 3,870 4,140 4,750 6,100 *7,090
8.05 m 8.88 m 9.41 m 9.67 m 9.70 m 9.49 m 9.02 m 8.26 m 7.10 m 5.29 m
SK350LC A
Standard Arm: 3.3 m Bucket: 1.4 m3 ISO heaped 1,070 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m 6.0 m
7.5 m
9.0 m
SK350LC-8
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg
SK350LC A
*12,590 *7,080 *10,760 *10,760 *10,390 *15,190 *15,190 *14,890 *20,200 *20,200 *20,250 *16,970
*12,590 *7,080 *10,390 *14,890 *20,250 *16,970
*7,320 *11,730 *11,730 *8,630 *13,950 12,580 *9,850 *15,020 11,930 *10,670 *15,030 11,720 *10,920 *14,170 11,790 *10,500 *12,270 12,080 *9,150 *8,560 *8,560
*7,320 *8,630 8,190 7,750 7,530 7,520 7,700
Standard Arm: 3.3 m Bucket: 1.4 m3 ISO heaped 1,070kg Shoe: 800 mm 1.5 m 3.0 m 4.5 m 6.0 m
*5,640 *5,840 *6,370 *7,070 *7,760 *8,270 *8,430 *8,040
*5,640 *5,840 *6,370 6,160 5,810 5,540 5,390 5,390
7.5 m
*5,840 *6,180 *6,530 *6,770 *6,370
4,680 4,490 4,310 4,160 4,100
9.0 m
*3,650 *3,600 *3,690 *3,920 *4,320 *4,980 *6,070 *6,990 *7,250 *7,090
*3,650 *3,600 *3,690 *3,920 3,770 3,820 4,080 4,690 6,030 *7,090
8.05 m 8.88 m 9.41 m 9.67 m 9.70 m 9.49 m 9.02 m 8.26 m 7.10 m 5.29 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg
SK350LC A
*12,590 *7,080 *10,390 *10,760 *10,760 *14,890 *15,190 *15,190 *20,250 *20,200 *20,200 *16,970
*12,590 *7,080 *10,390 *14,890 *20,250 *16,970
*7,320 *11,730 *11,730 *8,630 *13,950 12,980 *9,850 *15,020 12,330 *10,670 *15,030 12,120 *10,920 *14,170 12,190 *10,500 *12,270 *12,270 *9,150 *8,560 *8,560
*7,320 *8,630 8,460 8,020 7,800 7,790 7,970
Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m 6.0 m
*5,640 *5,840 *6,370 *7,070 *7,760 *8,270 *8,430 *8,040
*5,640 *5,840 *6,370 6,360 6,010 5,740 5,600 5,590
7.5 m
*5,840 *6,180 *6,530 *6,770 *6,370
4,840 4,660 4,470 4,320 4,260
9.0 m
*3,650 *3,600 *3,690 *3,920 *4,320 *4,980 *6,070 *6,990 *7,250 *7,090
*3,650 *3,600 *3,690 *3,920 3,920 3,970 4,240 4,870 6,250 *7,090
8.05 m 8.88 m 9.41 m 9.67 m 9.70 m 9.49 m 9.02 m 8.26 m 7.10 m 5.29 m
At Max. Reach Radius
SK330 A
Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 600 mm 1.5 m 3.0 m 4.5 m 6.0 m
7.5 m
9.0 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg
SK330 A
*6,110 *6,110 *9,500 *9,500 *12,990 *12,990 *16,880 *16,880
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*10,040 *10,040 *7,650 *12,620 *12,620 *9,030 *14,280 11,750 *10,090 *14,880 11,310 *10,650 *14,560 11,210 *10,620 *13,300 11,380 *9,830 *10,720 *10,720 *7,800
*7,650 8,170 7,600 7,260 7,140 7,210 7,530
Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 800 mm 1.5 m 3.0 m 4.5 m 6.0 m
*5,630 *6,390 *7,180 *7,830 7,680 7,590 *7,430
*5,630 6,150 5,740 5,390 5,170 5,080 5,160
7.5 m
*4,670 *5,220 *5,640 *6,090 5,910 5,780 5,760
*4,670 4,670 4,440 4,210 4,000 3,870 3,860
9.0 m
*2,830 *2,780 *2,850 *3,020 *3,310 *3,780 *4,520 5,710 *6,700 *7,000
*2,830 *2,780 *2,850 *3,020 3,230 3,230 3,410 3,830 4,700 6,760
8.85 m 9.62 m 10.11 m 10.35 m 10.38 m 10.18 m 9.74 m 9.04 m 8.00 m 6.46 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
13
kg kg kg kg kg kg kg kg kg kg
*6,110 *6,110 *9,500 *9,500 *12,990 *12,990 *16,880 *16,880
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*10,040 *10,040 *7,650 *12,620 *12,620 *9,030 *14,280 12,140 *10,090 *14,880 11,700 *10,650 *14,560 11,610 *10,620 *13,300 11,780 *9,830 *10,720 *10,720 *7,800
*7,650 8,440 7,870 7,520 7,400 7,480 7,800
*5,630 *6,390 *7,180 *7,830 7,970 7,870 *7,430
*5,630 6,350 5,930 5,590 5,370 5,280 5,360
*4,670 *5,220 *5,640 *6,090 6,140 6,000 5,980
*4,670 4,830 4,600 4,370 4,160 4,030 4,020
*2,830 *2,780 *2,850 *3,020 *3,310 *3,780 *4,520 *5,830 *6,700 *7,000
*2,830 *2,780 *2,850 *3,020 *3,310 3,370 3,550 3,980 4,880 *7,000
8.85 m 9.62 m 10.11 m 10.35 m 10.38 m 10.18 m 9.74 m 9.04 m 8.00 m 6.46 m
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg
SK350LC A
*6,110 *6,110 *9,500 *9,500 *12,990 *12,990 *16,880 *16,880
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*10,040 *10,040 *7,650 *12,620 *12,620 *9,030 *14,280 12,010 *10,090 *14,880 11,560 *10,650 *14,560 11,470 *10,620 *13,300 11,640 *9,830 *10,720 *10,720 *7,800
*7,650 8,350 7,780 7,440 7,310 7,390 7,710
Long Arm: 4.15 m Bucket: 1.2 m3 ISO heaped 930 kg Shoe: 800 mm 1.5 m 3.0 m 4.5 m 6.0 m
*5,630 *6,390 *7,180 *7,830 *8,210 *8,160 *7,430
*5,630 6,280 5,870 5,520 5,300 5,210 5,290
7.5 m
*4,670 *5,220 *5,640 *6,090 *6,460 *6,630 *6,310
*4,670 4,780 4,550 4,310 4,110 3,980 3,960
9.0 m
*2,830 *2,780 *2,850 *3,020 *3,310 *3,780 *4,520 *5,830 *6,700 *7,000
*2,830 *2,780 *2,850 *3,020 *3,310 3,320 3,500 3,930 4,820 6,920
8.85 m 9.62 m 10.11 m 10.35 m 10.38 m 10.18 m 9.74 m 9.04 m 8.00 m 6.46 m
At Max. Reach Radius
B 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg
*6,110 *6,110 *9,500 *9,500 *12,990 *12,990 *16,880 *16,880
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*15,930 *12,530 *11,720 *14,260 *18,060 *19,250 *15,020
*10,040 *10,040 *7,650 *12,620 *12,620 *9,030 *14,280 12,410 *10,090 *14,880 11,960 *10,650 *14,560 11,870 *10,620 *13,300 12,040 *9,830 *10,720 *10,720 *7,800
Notes:
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Bucket lift hook defined as lift point.
*7,650 8,620 8,050 7,700 7,580 7,660 *7,800
*5,630 *6,390 *7,180 *7,830 *8,210 *8,160 *7,430
*5,630 *6,390 6,070 5,730 5,500 5,410 5,490
*4,670 *5,220 *5,640 *6,090 *6,460 *6,630 *6,310
*4,670 4,940 4,710 4,480 4,270 4,140 4,120
*2,830 *2,780 *2,850 *3,020 *3,310 *3,780 *4,520 *5,830 *6,700 *7,000
*2,830 *2,780 *2,850 *3,020 *3,310 3,460 3,650 4,090 5,010 *7,000
8.85 m 9.62 m 10.11 m 10.35 m 10.38 m 10.18 m 9.74 m 9.04 m 8.00 m 6.46 m
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
14
Hydraulic Excavators
■ Bucket Capacity:
2.8 – 5.4 m3 ISO heaped ■ Engine Power:
370 kW {503 PS} /1,800 min-1{rpm} (ISO14396)
■ Operating Weight:
78,200 kg – 80,500 kg
The Power Wave of Change
Announcing ACERA GEOSPEC and The Concept of Beautiful Performance When we set out to design our new ACERA GEOSPEC hydraulic excavators, we kept our eyes on the big picture. Of course we wanted machines that would sell well, but we didn’t want to emphasize one aspect of performance at the expense of other features. So, instead of narrowly focusing on fuel-efficient, economical operation, for example, or on environmental compatibility, or on any other particular feature, we sought to develop well-rounded machines that can balance seemingly contradictory demands. Now, we're proud to introduce the latest member of the ACERA GEOSPEC family— the 80-ton SK850LC. This machine has it all: the highest productivity in its class; a resilient power plant; outstanding durability proven in the field in large building demolition machines; easy transportability; and an environmentally responsible design that reduces fuel consumption and operating costs. In short, the SK850LC satisfies all of the tough conditions that must be met by a large excavator engaged in demanding, continuous operations. So welcome to the birth of a new standard of performance: the 80-ton ACERA GEOSPEC SK850LC. With its efficient, sleek design, it brings a whole new excavating style to the worksite that's tuned to the natural beauty of our world. 1
Pursuing the “Three E’s” The Perfection of Next-Generation, Network Performance
Enhancement Greater Performance Capacity ●New hydraulic circuitry minimizes pressure loss ●High-efficiency, electronically controlled
Common Rail Fuel Injection Engine ●Powerful travel and arm/bucket digging force ●High-power engine and high swing torque
Economy Improved Cost Efficiency ●Advanced
power plant that reduces fuel consumption ●Easy maintenance that reduces upkeep costs ●Maintenance walk ensures easy access and maintenance ● High structural durability and reliability that retain machine value longer
Environment Features That Go Easy on the Earth ●Auto
Idle Stop as standard equipment ●Noise reduction measures (with improvement of the sound quality) minimize noise and vibration
ACERA GEOSPEC The "GEO" in GEOSPEC expresses our deep respect for our planet, and for the solid ground where excavators are in their element. This is accompanied by SPEC, which refers to the performance specifications needed to get the job done efficiently as we carry on the tradition of the urban-friendly ACERA series.
2
The GEOSPEC Difference:
Efficient Performance!
Great Productivity and Low Fuel Costs Advanced hydraulic technology keeps fuel costs low matches pump output with a high efficiency engine that conserves fuel, resulting in great productivity and low fuel costs.
High Swing Torque The use of high swing torque delivers a smoother, stronger and swing for faster, more efficient cycle times. It also provides plenty of start-up swing power for safe operation on slopes.
Swing torque: Swing speed:
268 kN m 8.4 min-1 •
Plenty of Digging Force Digging is smoother than ever with the newly shaped bucket. New bucket
Previous bucket
The sharp edge penetrates more easily.
Max. bucket digging force: Max. arm crowding force: 3
403 kN {41.1 tf} 311 kN {31.7 tf}
Strongest Travel Power and Drawbar Pulling Force in Its Class! The large-capacity motor delivers the strongest travel power and drawbar pulling force in the machine's class, making it ideal for large civil engineering projects, rock-crushing work, and other power-intensive applications.
Travel speed: Drawbar pulling force:
4.2/2.7 km/h 637 kN {65.0 tf}
Excellent Lateral Stability The SK850LC has the widest crawlers in its class for outstanding lateral stability. Fitted with a 5.4 m3 bucket, it can safely lift a maximum of 9.92 tons over the side, the most in its class. (Condition: rating over side, 10.7 m reach at G. L., 900 mm shoe)
“Top-class” lifting capacity
9.92t in its class
Widest crawlers in its class
Performance
2
Extended Continuous Operation (Large-Capacity Fuel Tank) The large-capacity fuel tank, combined with higher fuel efficiency, enables the SK850LC to operate continuously for twelve hours.
Fuel tank:
960L
NEXT-3E Technology
Next-Generation Electronic Engine Control
The high-pressure, common-rail fuel-injection engine features adjustable control to maximize fuel efficiency and provide powerful medium/low-speed torque. The result is a highly fuel-efficient engine.
* Continuous digging in S mode. Length of continuous operation will vary with type of operation and load on engine.
New Cooling System The patented Maintenance Walk as air duct is another KOBELCO innovation that further enhances the cooling system's effectiveness.
Oil cooler
Air
Intercooler
Maintenance Walk (air duct)
Air intake
Radiator
The cooling fan changes speed automatically according to the temperature of the cooling water in the radiator. This prevents overheating when the water temperature rises, allowing continuous, high-load operation. When the water temperature falls, the cooling system operates very quietly, contributing to both low noise and low fuel consumption.
Engine
Light-Touch Levers The operating levers are light and easy to move, reducing operator fatigue over long hours of operation.
Seamless, Smooth Combined Operations The GEOSPEC machines have inherited the various systems that make inching and combined operations easy and accurate, with further refinements that make a good thing even better. Leveling and other combined operations can be carried out with graceful ease.
3
NEXT-3E Technology
Total Tuning Through Advanced ITCS Control
The next-generation engine control is governed by a new version of ITCS, which responds quickly to sudden changes in hydraulic load to ensure that the engine runs as efficiently as possible with a minimum of wasted output. ITCS (Intelligent Total Control System) is an advanced, computerized system that provides comprehensive control of all machine functions.
Simple Select: Two Digging Modes H-Mode: For heavy duty when a higher performance level is required. S-Mode: For normal operations with lower fuel consumption. Two additional modes for specialized applications:
●The arm cylinder heads are arrang-
ed in a double row to reduce pressure loss in the return line and enhance fuel efficiency. The double row also enables faster arm retraction for better productivity. ●Electronic active control system ●Arm regeneration system ●Boom lowering regeneration system ●Variable swing priority system ●Swing rebound prevention system
1
Arm extension
Double-row head cylinders
NEXT-3E Technology
New Hydraulic System
Rigorous inspections for pressure loss are performed on all components of the hydraulic piping, from the first spool of the control valve to the connectors. This regimen, combined with the use of a new, high-efficiency pump, cuts energy loss to a minimum.
Attachment Mode Selector Switch (Optional) There's a choice of three different hydraulic circuits, to accommodate bucket, crusher or breaker, and the desired attachment mode can be selected with a switch, which automatically configures the selector valve. All attachment modes can be used in either Smode or H-mode.
Dump Counter Is Available Using the dump counter switch, which operates in tandem with the motor, the operator can display on the monitor and record the number of dumps made.
4
The GEOSPEC Difference:
The Value and Quality of Sturdy Construction! Large excavators are often used on steep, rough roads in mountains and quarries where they are expected to operate continuously for many hours at a time. They have to be durable. The high-strength construction of the SK850LC has already been proven through use in large KOBELCO building demolition machines, and has been carefully scrutinized through 30,000 hours of additional durability testing. It has the tough durability required in all of its components, including the upper and lower body and attachment.
Stable Attachment Strength All components are either cast or forged, with HD type boom and arm provided as standard equipment. The balanced design ensures excellent durability even when using a large bucket, providing highly reliable attachment strength.
•Arm HD arm (standard) Cast arm foot boss High-strength lock guard
Upper Frame with High Structural Strength FEM* analysis was used determine the best materials, select the steel plate, and create a high-strength design to resulting in an upper frame that features high structural strength.
*FEM (Finite Element Method) Method of numerical analysis used in structural mechanics
Strong Carbody Structure
•Bucket Front-edge angle and "R" shape optimize digging performance
•Boom HD boom (standard) Cast boom foot boss (Self-lubricant bush with high lubricating ability)
Large Components Used in the Crawler Frame
New shape
Previous model
Strength is especially crucial in the carbody. The swing mechanism on the SK850LC is mounted without a column, thereby increasing the carbody's crosssection size for greater strength. 5
•Reinforced Travel Reduction Gear Cover
•Track Guides Installed in Three Places
A high-strength protective cover enhances the durability of the travel reduction gear.
Track guides installed in three different places improve travel stability and help prevent the crawlers from coming off the rollers. More track guides can be installed as an option.
Reliability, Durability, Environmental Responsibility
Emergency Acceleration (Dial) Permits Continued Operation in the Unlikely Event of Malfunction If the mechatronic system should happen to malfunction, the ECU will automatically put the engine into high idle (maximum RPM), allowing the operator to continue working until a service specialist can come to repair the machine. During emergency operation, the hydraulic pumps automatically sense any trouble and control hydraulic flow accordingly. •Reinforcement Rib FEM analysis was used to add reinforcement ribs in strategic locations where the boom cylinder is attached to help prevent cylinder damage.
Engine throttle Mechatronic controller
Engine Pump
Normal Emergency
ENGINE ECU
•Easily detachable bolt-on type Undercover for upper carriage
Newly designed MCU ● Vertical
alignment and sealed cover gives better protection from water and dust ● Integration in base plate boosts assembly quality ● Reliable fixture to base plate
New MCU
Conventional MCU
Countermeasures Against Electrical System Failure All elements of the electrical system, including controller, have been designed for enhanced reliability.
Excellent Transportability Counterweight Device The counterweight device operates both vertically and horizontally for safe and efficient onsite assembly and disassembly.
Four Disassembly and Transport Patterns The SK850LC can be disassembled and transported in four different ways, including: no counterweight, with boom attached; main body only; main body without crawler frame; etc.
Variable Gauge Crawler The variable gauge crawler extends the crawlers to a maximum width of 4,300 mm (with 750 mm shoes) for extremely stable operation, and retracts them to a compact minimum width of 3,500 mm for easier transport. 6
The GEOSPEC Difference:
Easy Maintenance That Supports Large-Scale Operation! Daily maintenance checks are essential for the successful operation of large, continuously operating excavators. Inspections and maintenance must be quick and easy to maximize productivity. With its maintenance walk, the SK850LC provides easy access to essential components and systems so that more time is spent on the job.
Handrails on top of upper frame and top of counterweight are customized equipment. (Available for Japanese market only)
Maintenance Walk Serves as an Air Duct During Operation Kobelco's unique design covers the maintenance walk to create an air duct that helps to keep the radiator cool during machine operation.
7
Easy Inspection of Swing Bearing, Gear and Bolt A small access port is located in front of the upper frame to make it easier to inspect the swing bearing, gear and bolt.
Maintenance
Auto-Coil Grease Gun Holder • Grease tank • Lubrication hose • Fuel tank drain valve
Bolted Double Service Doors Open and Close Easily • Intercooler • A/C condenser • Fuel cooler • Radiator • Oil cooler
Around the engine compartment
• Air cleaner
• Fuel filter
• Fuel pre-filter with water separator
• Engine oil drain valve • Engine oil filter Simple Filtration • Hydraulic oil filter x 3
• Cat walk
• Suction filter •Large tool box • Drain filter • Battery
High-Grade Fuel Filter with Superior Filtration Performance
Drain Detachable type
The high-performance, large capacity filter is designed specially for the common-rail fuel injection engine.
More Efficient Maintenance Inside the Cab
● Detachable two-piece
Highly Durable Super-fine Filter The high-capacity hydraulic oil filter incorporates glass fiber with superior cleaning power and durability. With a replacement cycle of 1,000 hours and a construction that allows replacement of the filter element only, it’s both highly effective and highly economical.
● Super-fine filter
Long-life hydraulic oil filter:
1,000 hours
floor mat with handles for easy removal. A floor drain is located under the mat.
● Easy-access fuse
box. More finely differentiated fuses make it easier to locate malfunctions.
● Air conditioner filter
can be easily removed without tools for cleaning.
Monitor Display with Essential Information for Accurate Maintenance Checks ● Displays only the maintenance information that’s
needed, when it’s needed. function that provides earlywarning detection and display of electrical system malfunctions. ● Record previous breakdowns, including irregular and transient malfunctions. ● Self-diagnostic
8
The GEOSPEC Difference:
Designed from the Operator’s Point of View
Plenty of Foot Room
Creating a Comfortable Operating Environment ● Seat can be reclined to horizontal position
Comfortable 1,005 mm-Wide Cab. Wide Field of View Liberates the Operator The front field of view easily clears ISO standards, while the peripheral view reduces blind spots to a minimum. ● A long wiper covers a wide area for a broad view in bad weather. ●Back mirrors provide a safe view of the rear. ●Reinforced green glass windows meet European standards.
Wide-Access Cab Ensures Smooth Entry and Exit
● Double slide suspension seat
and
● Powerful airconditioner
automatic
The left control box lifts up with the safety lock lever to add 10° to the cab entry angle for easy entrance and exit.
Reduced Vibration for Fatigue-Free Operation The rigid cab construction and liquid-filled viscous cab mounts minimize cab vibration. In addition, the use of new lower rollers on the crawlers cuts travel vibration in half compared with previous models. 9
● Spacious luggage tray
● Two-speaker FM radio with station select (Optional) ● New interior design and materials create an elegant feel ● One-touch lock release simplifies opening and closing the front window
● Large cup holder
Comfort and Safety
The GEOSPEC Difference: Imagining Possible Scenarios and Preparing in Advance
The GEOSPEC Difference: Designed for the Environment and the Future! Auto Idle Stop Provided as Standard Equipment This function saves fuel and cuts emissions by shutting down the engine automatically when the machine is on stand by. It also stops the hourmeter, which helps to retain the machine’s asset value.
Safety Features That Take Various Scenarios into Consideration
Automatic Acceleration/Deceleration Function Reduces Engine Speed ● Swing
flashers/rear working
● Hammer for emergency exit
lights Engine Speed
Engine speed is automatically reduced when the control lever is placed in neutral, effectively saving fuel and reducing noise and exhaust emissions. The engine quickly returns to full speed when the lever is moved out of neutral.
Lever Off (Neutral)
● Thermal guard prevents contact with hot components during engine
inspections ● Hand rails meet European standards ● Retractable seatbelt requires no manual adjustment Lever On Lever Stroke
Low Noise Level and Mild Sound Quality The electronically controlled common-rail engine has a unique fuel injection system that runs quietly. Also, the hydraulic pumps have been redesigned to produce a more pleasant sound during pressure relief. In short, the GEOSPEC series meets all requirements cited in latest EU stage II.
Meets EMC (Electromagnetic Compatibility) Standards in Europe. Measures have been taken to ensure that the GEOSPEC machines do not cause electromagnetic interference.
Photo shows previous model.
10
Specifications Engine Model Type: No. of cylinders: Bore and stroke: Displacement: Rated power output: Max. torque: Electrical system: Starter: Alternator: Batteries:
Travel System KOMATSU SAA6D14OE-5 Direct injection, water-cooled, 4-cycle electrically-controlled common rail system type diesel engine with turbocharger, intercooler 6 140 mm X 165 mm 15.24 L 370 kW {503 PS} SAE NET at 1,800 min-1{rpm} (ISO14396: 2002) 2,197 N•m at 1,350 min-1{rpm} D.C. 24V 24 V, 11 kW 60 AMP 2 X 12 V – 190Ah
Hydraulic System
Travel motors: Travel brakes: Parking brakes: Travel shoes: Travel speed: Drawber pulling force: Gradeability Ground clearance:
2 X axial-piston motor, two-step motors Hydraulic disc brake Oil disc brake per motor 51 each side 4.2/2.7 km/h 637 kN {65,000 kgf} (J1309) 70 % (35°) 850 mm
Cab & Control Cab All-weather, sound-suppressed steel cab mounted on the silicon-sealed viscous mounts and equipped with a heavy, insulated floor mat. Control Two hand levers and two foot pedals for travel Two hand levers for excavating and swing Electric rotary-type engine throttle
Pump Type: Max. discharge flow: Relief valve setting Boom, arm and bucket: Travel circuit: Swing circuit: Control circuit: Pilot control pump: Main control valves: Oil cooler:
Two variable displacement pumps + 1 gear pump 2 X 504 L/min, 1 X 30 L/min 33.0 MPa {337 kgf/cm2} 33.0 MPa {337 kgf/cm2} 30.0 MPa {306 kgf/cm2} 5.0 MPa {50 kgf/cm2} Gear type 6-spool Air cooled type
Swing System Swing motor: Brake: Parking: Swing speed: Swing torque: Tail swing radius: Min. front swing radius:
11
Axial-piston motor Hydraulic; locking automatically when the swing control lever is in the neutral position Hydraulic disc brake 8.4 min-1{rpm} 268 kN•m 4,600 mm 6,340 mm
Boom, Arm & Bucket Boom cylinders: Arm cylinder: Bucket cylinder:
210 mm X 1,800 mm 220 mm X 2,175 mm 200 mm X 1,570 mm
Refilling Capacities & Lubrications Fuel tank: Cooling system: Engine oil: Travel reduction gear: Swing reduction gear:
960 L 76 L 58 L 2 X 22 L 2 X 21.5 L
Hydraulic oil tank:
473 L tank oil level 856 L hydraulic system
Boom, Arm and Bucket Combination Arm
Bucket
2.9 m
5.4 m3
Weight: 8,060 kg
Weight: 4,130 kg
Weight: 3,630 kg
Application
Mass Excavation Application
1,380 mm
2,390 mm
Boom 7.25 m Short boom
4,430 mm
7,620 mm
2,500 mm 2.9 m
4.6 m3
Weight: 8,440 kg
Weight: 4,130 kg
Weight: 3,270 kg
1,380 mm
8.25 m Standard Boom
Short Arm Application
4,430 mm 2,200 mm 3.5 m3
3.5 m3 HD
Weight: 4,240 kg
Weight: 2,610 kg
Weight: 3,700 kg
1,380 mm
2,340 mm
3.6 m
Standard Arm Application
5,190 mm
2,000 mm
1,990 mm
4.4 m
2,,8 m3
Weight: 4,730 kg
Weight: 2,380 kg
1,390 mm
8,620 mm
Long Arm Application
5,990 mm 1,680 mm
Backhoe bucket and arm combination Use Bucket capacity Opening width No. of bucket teeth Weight
Combinations
ISO heaped Struck With side cutter Without side cutter
m3 m3 mm mm
kg 2.9 m short arm 3.6 m standard arm 4.4 m long arm 2.9 m short arm + 7.25 m short boom
2.8 2.1 1,680 1,580 5 2,370 ○ ○ ◎ −
Backhoe bucket 3.5 2.6 2,000 1,900 5 2,610 ○ ◎ △ −
4.6 3.4 2,200 2,100 6 3,270 ◎ △ − −
5.4 4.0 2,500 2,400 6 3,630 △ − − ◎
12
Specifications Dimensions Unit: mm
Application Arm length Boom length A Overall length B Overall height (to top of boom)
Short Arm 2.9 m 14,600 4,830
with 750 mm shoe C
Overall width
D E F F' G G' H I
Overall height (to top of cab) Ground clearance of rear end* Ground clearance* Ground clearance* Tail swing radius Distance from center of swing to rear end Tumbler distance Overall length of crawler
with 900 mm shoe
with 750 mm shoe J
Track gauge
K L M
Shoe width Overall width of upperstructure Overall length of upperstructure
with 900 mm shoe
(Extended ) (Retracted) (Extended ) (Retracted)
(Extended ) (Retracted) (Extended ) (Retracted)
Standard Arm Long Arm 3.6 m 4.4 m 8.25 m Standard Boom 14,530 14,480 4,760 5,160 4,440 3,500 4,450 3,800 3,590 1,560 850 580 4,600 4,480 5,140 6,370 3,550 2,750 3,550 2,900 650/750/900 3,350 6,170
Mass Excavator 2.9 m 7.25 m Short Boom 13,590 4,850
*Without including height of shoe lug. A L
M
H
K
I
F'
F
E
D
B
G, G’
J C
Operating Weight & Ground Pressure Short Arm Application (In standard trim, with 8.25 m standard boom, 2.9 m short arm, and 4.6 m3 bucket) Shoe width Overall width Ground pressure Operating weight
mm mm kPa {kgf/cm2} kg
650 4,440 107 {1.09} 78,700
Triple grouser shoe (even height) 750 4,440 93 {0.95} 79,300
900 4,440 79 {0.80} 80,500
Standard Arm Application (In standard trim, with 8.25 m standard boom, 3.6 m standard arm, and 3.5 m3 bucket) Shoe width Overall width Ground pressure Operating weight
mm mm kPa {kgf/cm2} kg
650 4,440 106 {1.08} 78,200
Triple grouser shoe (even height) 750 4,440 92 {0.94} 78,800
900 4,450 78 {0.80} 79,900
Long Arm Application (In standard trim, with 8.25 m standard boom, 4.4 m long arm, and 2.8 m3 bucket) Shoe width Overall width Ground pressure Operating weight
mm mm kPa {kgf/cm2} kg
650 4,440 106 {1.08} 78,400
Triple grouser shoe (even height) 750 4,440 93 {0.95} 79,100
900 4,450 78 {0.80} 80,200
Mass Excavator Arm Application (In standard trim, with 7.25 m short boom, 2.9 m short arm, and 5.4 m3 bucket) Shoe width Overall width Ground pressure Operating weight
13
mm mm kPa {kgf/cm2} kg
650 4,440 107 {1.09} 78,700
Triple grouser shoe (even height) 750 4,440 93 {0.95} 79,300
900 4,450 79 {0.80} 80,400
Transportation Plan
4,480 mm
Configuration Plan 1
Description
Total weight
Base machine without counterweight and bucket, with lower structure, 8.25 m standard boom and 3.6 m standard arm.
62,700 kg
Base machine without counterweight, bucket and arm, with lower structure and 8.25 m standard boom.
58,500 kg
Base machine with lower structure, without counterweight, bucket, arm and boom.
48,800 kg
Base machine with carbody, without counterweight, bucket, arm,boom and lower structure.
24,900 kg
13,840 mm Transportation width: 3,500 mm
3,580 mm
Plan 2
12,130 mm Transportation width: 3,500 mm
3,590 mm
Plan 3
6,990 mm Transportation width: 3,500 mm
2,700 mm
Plan 4
5,680 mm
Transportation width: 3,350 mm *Counterweight: 13,400 kg
14
Specifications a b h 15m 14 13 12 11 10 9
d
8 7
e
h'
6 5 4
f
3 2 1 0 1
i
c j
g
2 3
8' (2.4 m) 15m 14 13 12 11 10 9 8 7 6 5 4 3 2 1
4 5
Short Arm (2.9 m)
6
Standard Arm (3.6 m)
7 8
Long Arm (4.4 m)
9 10m
Mass Excavator (Short Boom 7.25 m + Short Arm 2.9 m)
Working Ranges
Unit: m
Application Arm length Boom length a - Max. digging reach b - Max. digging reach at ground level c - Max. digging depth d - Max. digging height e - Max. dumping clearance f - Min. dumping clearance g - Max. vertical wall digging depth h - Min. swing radius h'- Height at min. swing radius i - Horizontal digging stroke at ground level j - Digging depth for 2.4 m (8') flat bottom Bucket capacity ISO heaped m3
Short Arm 2.9 m 13.48 13.19 8.3 12.34 8.41 4.31 5.16 5.74 10.89 4.36 8.15 4.6
Standard Arm 3.6 m 8.25 m Standard Boom 13.83 13.55 8.9 12.11 8.34 3.67 6.74 6.34 10.87 5.67 8.75 3.5
Long Arm 4.4 m 14.56 14.29 9.7 12.35 8.57 2.86 7.48 6.34 10.87 6.80 9.58 2.8
Digging Force (ISO 6015)
Unit: kN {kgf}
Application Arm length Boom length
15
Mass Excavator 2.9 m 7.25 m Short Boom 12.45 12.13 7.38 11.69 7.77 3.66 4.42 5.47 10.24 4.39 7.23 5.4
Short Arm 2.9 m
Standard Arm 3.6 m 8.25 m Standard Boom
Long Arm 4.4 m
Mass Excavator 2.9 m 7.25 m Short Boom
Bucket digging force
kN {kgf}
432 {44,100}
403 {40,900}
403 {41,100}
432 {44,100}
Arm crowding force
kN {kgf}
351 {35,800}
311 {31,600}
272 {27,700}
351 {35,800}
Lifting Capacities
A - Reach from swing centerline to bucket hook B - Bucket hook height above/below ground C - Lifting capacities in kilograms • Max. discharge pressure: 36.0 MPa (367 kgf/cm2)
Rating over front
Rating over side or 360 degrees
Short Arm Application SK850LC A
Boom: 8.25 m Arm: 2.9 m Bucket: 4.6 m3 ISO heaped 3,160 kg Shoe: 650 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
12.0 m
Max. Reach Radius
B 10.5 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg kg kg
*22,670 *33,200
*22,670 *33,200
*22,200 *32,630 *30,680 *25,010
*22,200 *32,630 *30,680 *25,010
*21,870 *25,290 *27,410 *28,130 *27,770 *26,450 *23,980 *19,780
*21,870 *25,290 24,280 23,620 23,470 23,680 *23,980 *19,780
*14,790 *16,900 *18,940 *20,520 *21,400 *21,510 *20,790 *18,980 *15,300
*14,790 *16,900 18,340 17,320 16,700 16,430 16,470 16,820 *15,300
*11,850 *12,870 *14,120 *15,380 *16,440 *17,110 *17,250 *16,670 *14,920
*11,850 *12,870 *14,120 13,710 13,050 12,590 12,370 12,390 12,720
*11,200 *11,690 *12,400 *13,160 *13,820 *14,210 *14,160
*11,200 11,450 11,010 10,540 10,130 9,840 9,710
*11,710
8,200
*11,550 *11,250 *11,200 *11,290 *11,480 *11,760 *12,100 *12,490 *12,910 *13,320 *13,630 *13,540
*11,550 *11,250 10,570 9,340 8,590 8,180 8,070 8,270 8,840 9,940 11,980 *13,540
9.07 m 10.19 m 10.98 m 11.52 m 11.85 m 11.97 m 11.90 m 11.63 m 11.15 m 10.43 m 9.40 m 7.96 m
Standard Arm Application SK850LC A
Boom: 8.25 m Arm: 3.6 m Bucket: 3.5 m3 ISO heaped 2,610 kg Shoe: 650 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg kg
*16,210 *25,830 *34,370 *35,580
*18,170 *25,830 *34,370 *35,580
*20,070 *27,080 *35,680 *32,370 *27,020
*20,070 *27,080 *35,680 *32,370 *27,020
*21,290 *24,940 *27,400 *28,460 *28,360 *27,250 *25,030 *21,200
*21,290 *24,940 24,840 24,050 23,790 23,890 24,310 *21,200
*16,670 *18,820 *20,550 *21,600 *21,890 *21,350 *19,790 *16,600
*16,670 18,790 17,730 17,040 16,710 16,680 16,940 *16,600
*12,770 *14,060 *15,390 *16,530 *17,310 *17,580 *17,170 *15,740
*12,770 *14,060 14,090 13,400 12,900 12,630 12,590 12,830
*11,170 *11,700 *12,450 *13,260 *13,980 *14,460 *14,530
*10,280 *10,380 *10,760 *11,410 *11.960 *12,420 *12,960 *13,590 *14,290 *15,040 *15,700
*11,170 *11,700 11,390 10,890 10,450 10,130 9,960
*10,280 *10,380 10,060 9,210 8,730 8,560 8,700 9,210 10,260 12,270 *15,700
10.07 m 10.87 m 11.42 m 11.75 m 11.87 m 11.80 m 11.53 m 11.04 m 10.31 m 9.28 m 7.81 m
Long Arm Application SK850LC A
Boom: 8.25 m Arm: 4.4 m Bucket: 2.8 m3 ISO heaped 2,380 kg Shoe: 650 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
12.0 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m -7.5 m
kg kg kg kg kg kg kg kg kg kg kg kg
*16,120 *22,270 *29,150 *37,520
*16,210 *22,270 *29,150 *37,520
*26,910 *19,100 *20,730 *25,320 *31,750 *34,720 *30,320 *23,500
*26,910 *19,100 *20,730 *25,320 *31,750 *34,720 *30,320 *23,500
*22,800 *25,870 *27,650 *28,210 *27,710 *26,150 *23,230 *18,170
*22,800 25,290 24,120 23,570 23,460 23,700 *23,230 *18,170
*15,100 *17,410 *19,420 *20,830 *21,530 *21,450 *20,460 *18,230
*15,100 *17,410 17,950 17,070 16,560 16,370 16,480 16,900
*11,540 *12,900 *14,350 *15,670 *16,670 *17,230 *17,200 *16,370
*11,540 *12,900 14,290 13,490 12,880 12,480 12,320 12,410
*9,760 *10,040 *10,670 *11,500 *12,420 *13,280 *13,940 *14,280 *14,100
*9,760 *10,040 *10,670 *11,500 10,990 10,470 10,050 9,790 9,700
*9,500 *10,600 *11,140 *11,650 *12,010
9,260 8,950 8,600 8,280 8,030
*8,080 *8,100 *8,320 *8,740 *9,400 *10,350 *11,670 *12,240 *12,900 *13,630 *14,400 *14,990
*8,080 *8,100 *8,320 8,210 7,780 7,610 7,680 8,050 8,820 10,230 12,960 *14,990
10.95 m 11.69 m 12.20 m 12.51 m 12.62 m 12.56 m 12.30 m 11.85 m 11.17 m 10.23 m 8.92 m 7.06 m
Mass Excavator Application SK850LC A
Boom: 7.25 m Arm: 2.9 m Bucket: 5.4 m3 ISO heaped 3,570 kg Shoe: 650 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg kg
*21,140 *31,710 *41,720
*21,140 *31,710 *41,720
*30,130
*30,130
*27,360 *36,280 *36,250 *30,930 *22,110
*27,360 *36,280 *36,250 *30,930 *22,110
*21,760 *25,450 *28,110 *29,310 *29,060 *27,320 *23,680 *16,500
*21,760 *25,450 26,150 25,210 24,870 25,000 *23,680 *16,500
*15,580 *17,600 *19,690 *21,400 *22,370 *22,390 *21,180 *18,040
Notes:
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Bucket lift hook defined as lift point.
*15,580 *17,600 19,400 18,410 17,740 17,420 17,460 17,910
*13,290 *14,040 *15,160 *16,370 *17,400 *17,980 *17,830 *16,450
*13,290 *14,040 14,980 14,310 13,720 13,290 13,100 13,200
*13,660 *14,260 *14,750 *14,840
11,220 10,870 10,550 10,340
*11,770 *11,540 *11,690 *12,190 *13,050 *14,230 *14,690 *15,190 *15,640 *15,820 *14,900
*11,770 *11,540 11,540 10,530 10,020 9,910 10,220 11,080 12,790 *15,820 *14,900
8.93 m 9.83 m 10.43 m 10.79 m 10.93 m 10.85 m 10.55 m 10.02 m 9.20 m 8.02 m 6.25 m
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
16
Lifting Capacities
A - Reach from swing centerline to bucket hook B - Bucket hook height above/below ground C - Lifting capacities in kilograms • Max. discharge pressure: 36.0 MPa (367 kgf/cm2)
Rating over front
Rating over side or 360 degrees
Short Arm Application SK850LC A
Boom: 8.25 m Arm: 2.9 m Bucket: 4.6 m3 ISO heaped 3,160 kg Shoe: 750 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
12.0 m
Max. Reach Radius
B 10.5 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg kg kg
*22,670 *33,200
*22,670 *33,200
*22,200 *32,630 *30,680 *25,010
*22,200 *32,630 *30,680 *25,010
*21,870 *25,290 *27,410 *28,130 *27,770 *26,450 *23,980 *19,780
*21,870 *25,290 24,510 23,850 23,700 23,910 *23,980 *19,780
*14,790 *16,900 *18,940 *20,520 *21,400 *21,510 *20,790 *18,980 *15,300
*14,790 *16,900 18,510 17,490 16,870 16,600 16,640 16,990 *15,300
*11,850 *12,870 *14,120 *15,380 *16,440 *17,110 *17,250 *16,670 *14,920
*11,850 *12,870 *14,120 13,850 13,190 12,730 12,500 12,520 12,850
*11,200 *11,690 *12,400 *13,160 *13,820 *14,210 *14,160
*11,200 11,560 11,120 10,650 10,240 9,950 9,820
*11,710
8,290
*11,550 *11,250 *11,200 *11,290 *11,480 *11,760 *12,100 *12,490 *12,910 *13,320 *13,630 *13,540
*11,550 *11,250 10,670 9,440 8,690 8,280 8,170 8,370 8,940 10,050 12,100 *13,540
9.07 m 10.19 m 10.98 m 11.52 m 11.85 m 11.97 m 11.90 m 11.63 m 11.15 m 10.43 m 9.40 m 7.96 m
Standard Arm Application SK850LC A
Boom: 8.25 m Arm: 3.6 m Bucket: 3.5 m3 ISO heaped 2,610 kg Shoe: 750 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg kg
*18,170 *25,840 *34,380 *35,580
*18,170 *25,840 *34,380 *35,580
*20,080 *27,080 *35,680 *32,370 *27,010
*20,080 *27,080 *35,680 *32,370 *27,010
*21,290 *24,940 *27,400 *28,460 *28,360 *27,250 *25,020 *21,200
*21,290 *24,940 24,570 23,780 23,520 23,620 24,040 *21,200
*16,670 *18,820 *20,550 *21,600 *21,890 *21,350 *19,790 *16,600
*16,670 18,590 17,530 16,850 16,510 16,480 16,740 *16,600
*12,770 *14,060 *15,390 *16,540 *17,310 *17,580 *17,170 *15,730
*12,770 *14,060 13,930 13,240 12,750 12,470 12,440 12,680
*11,170 *11,700 *12,450 *13,260 *13,980 *14,460 *14,530
*10280 *10,380 *10,760 *11,410 *11.960 *12,420 *12,960 *13,590 *14,290 *15,040 *15,700
*11,170 *11,700 11,260 10,760 10,320 10,000 9,830
*10280 *10,380 9,940 9,100 8,620 8,450 8,580 9,090 10,130 12,120 *15,700
10.07 m 10.87 m 11.42 m 11.75 m 11.87 m 11.80 m 11.53 m 11.04 m 10.31 m 9.28 m 7.81 m
Long Arm Application SK850LC A
Boom: 8.25 m Arm: 4.4 m Bucket: 2.8 m3 ISO heaped 2,380 kg Shoe:750 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
12.0 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m -7.5 m
kg kg kg kg kg kg kg kg kg kg kg kg
*16,210 *22,270 *29,150 *37,520
*16,210 *22,270 *29,150 *37,520
*26,910 *19,100 *20,730 *25,320 *31,750 *34,720 *30,320 *23,500
*26,910 *19,100 *20,730 *25,320 *31,750 *34,720 *30,320 *23,500
*22,800 *25,870 *27,650 *28,210 *27,710 *26,150 *23,230 *18,170
*22,800 25,530 24,350 23,800 23,690 23,930 *23,230 *18,170
*15,100 *17,410 *19,420 *20,830 *21,530 *21,450 *20,460 *18,230
*15,100 *17,410 18,120 17,240 16,730 16,540 16,650 17,070
*11,540 *12,900 *14,350 *15,670 *16,670 *17,230 *17,200 *16,370
*11,540 *12,900 *14,350 13,620 13,010 12,620 12,450 12,540
*9,760 *10,040 *10,670 *11,500 *12,420 *13,280 *13,940 *14,280 *14,100
*9,760 *10,040 *10,670 *11,500 11,100 10,580 10,160 9,900 9,810
*9,500 *10,600 *11,140 *11,650 *12,010
9,360 9,040 8,700 8,370 8,120
*8,080 *8,100 *8,320 *8,740 *9,400 *10,350 *11,670 *12,240 *12,900 *13,630 *14,400 *14,990
*8,080 *8,100 *8,320 8,300 7,870 7,700 7,770 8,140 8,920 10,350 13,100 *14,990
10.95 m 11.69 m 12.20 m 12.51 m 12.62 m 12.56 m 12.30 m 11.85 m 11.17 m 10.23 m 8.92 m 7.06 m
Mass Excavator Application SK850LC A
Boom: 7.25 m Arm: 2.9 m Bucket: 5.4 m3 ISO heaped 3,570 kg Shoe: 750 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. 1.5 m 3.0 m 4.5 m 6.0 m
17
kg kg kg kg kg kg kg kg kg kg kg
*21,140 *31,710 *41,720
*21,140 *31,710 *41,720
*30,130
*30,130
*27,360 *36,280 *36,250 *30,930 *22,110
*27,360 *36,280 *36,250 *30,930 *22,110
*21,760 *25,450 *28,110 *29,310 *29,060 *27,320 *23,680 *16,500
*21,760 *25,450 26,380 25,440 25,100 25,230 *23,680 *16,500
*15,580 *17,600 *19,690 *21,400 *22,370 *22,390 *21,180 *18,040
*15,580 *17,600 19,570 18,580 17,910 17,590 17,630 *18,040
*13,290 *14,040 *15,160 *16,370 *17,400 *17,980 *17,830 *16,450
*13,290 *14,040 15,120 14,450 13,850 13,430 13,230 13,330
*13,660 *14,260 *14,750 *14,840
11,330 10,980 10,660 10,450
*11,770 *11,540 *11,690 *12,190 *13,050 *14,230 *14,690 *15,190 *15,640 *15,820 *14,900
*11,770 *11,540 11,650 10,640 10,120 10,010 10,330 11,190 12,920 *15,820 *14,900
8.93 m 9.83 m 10.43 m 10.79 m 10.93 m 10.85 m 10.55 m 10.02 m 9.20 m 8.02 m 6.25 m
Short Arm Application SK850LC A
Boom: 8.25 m Arm: 2.9 m Bucket: 4.6 m3 ISO heaped 3,160 kg Shoe: 900 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
12.0 m
Max. Reach Radius
B 10.5 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg kg kg
*22,670 *33,200
*22,670 *33,200
*22,200 *32,630 *30,680 *25,010
*22,200 *32,630 *30,680 *25,010
*21,870 *25,290 *27,410 *28,130 *27,770 *26,450 *23,980 *19,780
*21,870 *25,290 24,910 24,240 24,090 24,300 *23,980 *19,780
*14,790 *16,900 *18,940 *20,520 *21,400 *21,510 *20,790 *18,980 *15,300
*14,790 *16,900 18,800 17,780 17,150 16,880 16,920 17,270 *15,300
*11,850 *12,870 *14,120 *15,380 *16,440 *17,110 *17,250 *16,670 *14,920
*11,850 *12,870 *14,120 14,070 13,410 12,950 12,730 12,750 13,080
*11,200 *11,690 *12,400 *13,160 *13,820 *14,210 *14,160
*11,200 *11,690 11,300 10,830 10,420 10,130 10,010
*11,710
8,450
*11,550 *11,250 *11,200 *11,290 *11,480 *11,760 *12,100 *12,490 *12,910 *13,320 *13,630 *13,540
*11,550 *11,250 10,850 9,610 8,850 8,440 8,330 8,530 9,110 10,240 12,320 *13,540
9.07 m 10.19 m 10.98 m 11.52 m 11.85 m 11.97 m 11.90 m 11.63 m 11.15 m 10.43 m 9.40 m 7.96 m
Standard Arm Application SK850LC A
Boom: 8.25 m Arm: 3.6 m Bucket: 3.5 m3 ISO heaped 2,610 kg Shoe: 900 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. 1.5 m 3.0 m 4.5 m 6.0 m
kg kg kg kg kg kg kg kg kg kg kg
*18,170 *25,830 *34,370 *35,580
*18,170 *25,830 *34,370 *35,580
*20,700 *27,080 *35,680 *32,370 *27,020
*20,700 *27,080 *35,680 *32,370 *27,020
*21,290 *24,940 *27,400 *28,460 *28,360 *27,250 *25,030 *21,200
*21,290 *24,940 25,470 24,670 24,410 24,520 24,940 *21,200
*16,670 *18,820 *20,550 *21,600 *21,890 *21,350 *19,790 *16,600
*16,670 *18,820 18,180 17,500 17,160 17,130 17,390 *16,600
*12,770 *14,060 *15,390 *16,530 *17,310 *17,580 *17,170 *15,740
*12,770 *14,060 14,450 13,760 13,260 12,990 12,950 13,190
*11,170 *11,700 *12,450 *13,260 *13,980 *14,460 *14,530
*10,280 *10,380 *10,760 *11,410 *11.960 *12,420 *12,960 *13,590 *14,290 *15,040 *15,700
*11,170 *11,700 11,690 11,190 10,750 10,420 10,260
*10,280 10,380 10,320 9,470 8,990 8,820 8,960 9,490 10,560 12,610 *15,700
10.07 m 10.87 m 11.42 m 11.75 m 11.87 m 11.80 m 11.53 m 11.04 m 10.31 m 9.28 m 7.81 m
Long Arm Application SK850LC A
Boom: 8.25 m Arm: 4.4 m Bucket: 2.8 m3 ISO heaped 2,380 kg Shoe:900 mm 3.0 m 4.5 m 6.0 m 7.5 m
9.0 m
10.5 m
12.0 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m -7.5 m
kg kg kg kg kg kg kg kg kg kg kg kg
*16,210 *22,270 *29,150 *37,520
*16,210 *22,270 *29,150 *37,520
*26,910 *19,100 *20,730 *25,320 *31,750 *34,720 *30,320 *23,500
*26,910 *19,100 *20,730 *25,320 *31,750 *34,720 *30,320 *23,500
*22,800 *25,870 *27,650 *28,210 *27,710 *26,150 *23,230 *18,170
*22,800 *25,870 24,740 24,190 24,080 24,320 *23,230 *18,170
*15,100 *17,410 *19,420 *20,830 *21,530 *21,450 *20,460 *18,230
*15,100 *17,410 18,410 17,530 17,020 16,830 16,940 17,350
*11,540 *12,900 *14,350 *15,670 *16,670 *17,230 *17,200 *16,370
*11,540 *12,900 *14,350 13,850 13,230 12,840 12,680 12,760
*9,760 *10,040 *10,670 *11,500 *12,420 *13,280 *13,940 *14,280 *14,100
*9,760 *10,040 *10,670 *11,500 11,280 10,760 10,350 10,080 10,000
*9,500 *10,600 *11,140 *11,650 *12,010
*9,500 9,200 8,860 8,530 8,280
*8,080 *8,100 *8,320 *8,740 *9,400 *10,350 *11,670 *12,240 *12,900 *13,630 *14,400 *14,990
*8,080 *8,100 *8,320 8,450 8,020 7,850 7,930 8,310 9,090 10,540 13,320 *14,990
10.95 m 11.69 m 12.20 m 12.51 m 12.62 m 12.56 m 12.30 m 11.85 m 11.17 m 10.23 m 8.92 m 7.06 m
Mass Excavator Application SK850LC A
Boom: 7.25 m Arm: 2.9 m Bucket: 5.4 m3 ISO heaped 3,570 kg Shoe: 900 mm 3.0 m 4.5 m 6.0 mm 7.5 m
9.0 m
10.5 m
Max. Reach Radius
B 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m G. L. -1.5 m -3.0 m -4.5 m -6.0 m
kg kg kg kg kg kg kg kg kg kg kg
*21,140 *31,710 *41,720
*21,140 *31,710 *41,720
*30,130
*30,130
*27,360 *36,280 *36,250 *30,930 *22,110
*27,360 *36,280 *36,250 *30,930 *22,110
*21,760 *25,450 *28,110 *29,310 *29,060 *27,320 *23,680 *16,500
*21,760 *25,450 26,770 25,840 25,500 25,620 *23,680 *16,500
*15,580 *17,600 *19,690 *21,400 *22,370 *22,390 *21,180 *18,040
Notes:
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Bucket lift hook defined as lift point.
*15,580 *17,600 *19,690 18,870 18,190 17,880 17,910 *18,040
*13,290 *14,040 *15,160 *16,370 *17,400 *17,980 *17,830 *16,450
*13,290 *14,040 *15,160 14,670 14,080 13,650 13,460 13,560
*13,660 *14,260 *14,750 *14,840
11,520 11,170 10,850 10,630
*11,770 *11,540 *11,690 *12,190 *13,050 *14,230 *14,690 *15,190 *15,640 *15,820 *14,900
*11,770 *11,540 *11,690 10,820 10,300 10,190 10,520 11,390 13,140 *15,820 *14,900
8.93 m 9.83 m 10.43 m 10.79 m 10.93 m 10.85 m 10.55 m 10.02 m 9.20 m 8.02 m 6.25 m
4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
18
STANDARD EQUIPMENT ENGINE ■ Engine, SAA6D140E-5, diesel engine with turbocharger and intercooler ■ Automatic engine deceleration ■ Auto Idle Stop (AIS) ■ Batteries (2x12V - 190Ah) ■ Starting motor (24V - 11kW), 60 amp alternator ■ Removable clean-out screen for radiator ■ Automatic engine shut-off for low engine oil pressure ■ Engine oil pan drain valve ■ Double element air cleaner x 2 ■ Fuel filters ■ Fuel pre-filter ■ Engine oil filter ■ Corrosion register ■ Radiator reserve tank CONTROL ■ Working mode selector (H-mode and S-mode) SWING SYSTEM & TRAVEL SYSTEM ■ Swing rebound prevention system ■ Straight propel system ■ Two-speed travel with automatic shift down ■ Sealed & lubricated track links ■ Grease-type track adjusters ■ Automatic swing brake HYDRAULIC ■ Arm regeneration system ■ Auto warm up system ■ Aluminum hydraulic oil cooler ■ Hydraulic oil filter ■ Drain filter MIRRORS & LIGHTS ■ Two rearview mirrors ■ Four front and two rear working lights ■ Swing flashers
CAB & CONTROL ■ Two control levers, pilot-operated ■ Tow eyes ■ Horn, electric ■ Integrated left-right slide-type control box ■ Cab, all-weather sound suppressed type ■ Ashtray ■ Cigarette lighter ■ Cab light (interior) ■ Coat hook ■ Luggage tray ■ Large cup holder ■ Detachable two-piece floor mat ■ 7-way adjustable suspension seat ■ Retractable seatbelt ■ Headrest ■ Handrails ■ Heater and defroster ■ Intermittent windshield wiper with double-spray washer ■ Sunshade ■ Skylight ■ Tinted safety glass ■ Pull-type front window and removable lower front window ■ Easy-to-read multi-display monitor ■ Automatic air conditioner ■ Emergency escape hammer ■ Radio, AM/FM Stereo with speakers
OPTIONAL EQUIPMENT ■ Wide range of buckets ■ Various optional arms ■ Wide range of shoes ■ Travel alarm
■ Boom safety valve ■ Front-guard protective structures ■ Additional hydraulic circuit
Note: Standard and optional equipment may vary. Consult your KOBELCO dealer for specifics.
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. Inquiries To: 17-1, Higashigotanda 2-chome, Shinagawa-ku, Tokyo 141-8626 JAPAN Tel: +81 (0) 3-5789-2146 Fax: +81 (0) 3-5789-2135 www.kobelco-kenki.co.jp/english_index.html
Bulletin No. ACERA GEOSPEC SUPER SK850LC-SEASIA-2-101 2009092000 Printed in Japan
