Transcript
MAGIC CONTROLLING WiFi MODULE Keep your heat pump in hand
CONTENT 1. Spare parts of WiFi module
1
2. Description of the magic controlling
1
3. Using WiFi module to control the device 3.1 Connecting by simple mode. 3.2 Connecting by home router. 3.3 Connecting by internet mode 3.4 Installation.
2 2 2 2 3
4. Instruction of APP 4.1 Connecting the WiFi module in simple mode 4.2 Connecting the WiFi module to your home router 4.3 Connecting the WiFi module in remote mode
4 5 7 10
5. The main controlling screen
12
6. Other functions instruction
19
7. Frequently Asked Questions
20
Using Instructions 1.Contents of the accessory pack
(
1)
(
1)
(
2.Description of the magic controlling
1
4
3
5
2
1
LED lights( on = green )
2
Simple mode selection button
3
Magic Controlling identification
4
Bar code
5
Password
1.Indicator of simple mode 2.Indicator of Router connection. 3.Indicator of Internet connection. 4.Indicator of timer.
1
1)
Using Instructions 3.Using WiFi module to control the device. Note
Y ou can control the P ool Heater by your smart terminal(such as mobile phone, tablet PC, computer and so on.) There are three controlling ways between the Pool Heater and smart terminal. 3.1 Connecting by simple mode. Green
3.2 Connecting by Router connection
Green
3.3 Connecting by Internet mode.
Green
2
Using Instructions 3.4 Installation 3.4.1. Opening the heat pump
1
3.4.2. Connection 2 1 3
C A
3
B A
2
1
2 B
3 Without WiFi module
With WiFi module
3
Using Instructions
5
4
4. Instruction of APP
Search Pool Heater
Download Pool Heater from App Store.
4
Using Instructions 4.1 Connecting the WiFi module in simple mode Press the AP Mode button for two seconds until the indicator is on .
2s
1
1
2
2 5
Using Instructions
4
3
5
6
Till here, you can control your heat pump all you want in the simple mode.
6
Using Instructions 4.2 Connecting the WiFi module to your home router with your phone. Restart the Pool Heater APP.
1 Tap
2
1
3
2
Input your network name and password.
3
4 Tap
7
Tap
Using Instructions
5
6
Attention: Your phone must select your home router, before you enter next step!
Around 30s Automatically
After the connection to the router, back to the login interface, firstly select Local and then tap the search icon.
1 Tap this to search the Pool Heater name.
2
7 6
Tap the name
8
Using Instructions Input the device bar code and verification code.
Tap"Now"
8
9
11
10
9
Using Instructions
30s
4.3 Connecting the WiFi module in remote mode Login your device by remote mode directly. Open the APP in your terminal, select remote icon, tap the device name to login (the device name has been added when you register).
Tap the device name to login
1
2
4
3 10
Using Instructions Using the device barcode for remote login to control the device. In the login screen, tap the Login icon to enter the bar code and verification code and select Login.
1
Tap
3
1
2
2
Input bar code and verification code.
3
4
11
Using Instructions 5. The main controlling screen.
1 Setting Menu 2 Power ON/OFF 3 Mode Setting 4 Ambient Temp. 5 Target Temp.
6 Current Mode
7 Inlet Water Temp.
5.1 Startup & Shutdown Slide the Power ON/OFF icon to startup/shutdown the Pool Heater.
12
Using Instructions 5.2 Mode Switch Tap the Mode Setting icon to select the mode you need and then save it.
After change mode.
5.3 Target Temperature Setting Tap the Target Temp. icon to select the temperature you need and then save it.
Tap it to set the target temperature
13
Using Instructions 5.4 Setting Menu
Tap it to go to the user interface.
Temperature curve:The blue one shows Inlet Water temp.the orange one shows Outlet Water temp. Drag up/down or left/ right to scroll the graph. You can also zoom in/out the graph.
Timer setting Temperature unit
5.4.1 Timer (1) Tap "TimerOne" icon to timer setting interface (2) Select Timer on to set the start time and save it, and Timer off is the same as Timer on set.
Note: (1)Timing setting method of TimerTwo is the same as that of TimerOne. (2)When the timer is set, the Timer indicator light of WiFi module will be lighted on.
14
Using Instructions 5.4.2 Temperature unit switch Slide the orange icon to switch the temperature unit.
Temperature unit is changed accordingly
Slide to left or right to switch.
5.5 In the menu interface, tap "USER" icon to enter user interface.
Tap "USER" to enter user interface.
Tap"Rename device"
15
Using Instructions 5.5.1 Tap the Rename device icon to enter the Rename interface.
Input the new name and save it.
5.5.2 Tap Instruction manual icon to get the instruction information. (Four pages in total)
Slide left or right can scan the instruction pictures.
16
Using Instructions 5.5.3 Tap Authorization icon to provide authorization for the manufacturer.
Tap to provide authorization.
Tap Yes icon to provide authorization
The time left for authorization. The default time is 48h.
Cancel the authorization at any time.
17
Using Instructions 5.6 The fault interface 5.6.1 When the device breaks down, there is a fault symbol in the main interface. 5.6.2 Tap the fault symbol to get the details of the fault.
Tap fault symbol to check the details of the fault.
Code and name of the fault.
The symbol will disappear when the fault removed.
18
Using Instructions 6. Other functions instruction . In the login interface, tap Info icon to scan the instruction of all these icons. Slide left or right to scan different pages.
Tap
Slide the interface left or right to scan these two pages.
19
Using Instructions 7. Frequently Asked Questions 7.1. Connected AP mode successfully: AP mode indicator is on, router link indicator" and "Internet link indicator is off. 7.2. Connected internet mode successfully: AP mode indicator is off, router connection indicator" and "Internet connection indicator is on. (If the Internet connection indicator is off, it means that the connection to the remote server is failed.) 7.3. FAQ:7.3.1. When the AP mode indicator is on, why the smart terminal cannot search the Pool Heater? (1). Make sure the smart terminal is connected to Simple-WiFi wireless network; (2). Try to search Pool Heater in shorter distance, and avoid obstacles which cause signal decreasing;
7.3.2. Why the router connection indicator is on, while the Internet connection indicator is off? (1). Check whether the router has access to the Internet or not; (2). Use the smart terminal to switch to the internet mode once again; 7.3.3. Why the router indicator is off when the unit is not at the AP mode connection? (1). Check whether the router has access to the Internet; (2). Use the smart terminal to switch to the internet mode once again, make sure you've typed the correct network name and password; (3). Try to shorten the distance between the Pool Heater and the router to avoid too much obstacles which cause signal decreasing; 7.3.4.How to solve the problem that the distance between the device and the router is too far, resulting in signal instability? (1)Try to add new wireless router between the original router and the Pool Heater, as well as terminal and the Pool Heater.
20
