Hypercardioid - Samson Technologies

Transcript

S12 HYPERCARDIOID M I C R O P H O N E The Samson S12 is a professional dynamic microphone which is specially designed for use in live performance and public address environments where unwanted ambient sound is occurring from many different directions. Its dynamic design enables it to tolerate high sound pressure levels (SPLs) such as those generated by drums and amplified instruments, and its tight hypercardioid pattern ensures maximum feedback rejection while delivering a strong, crisp signal from the audio source directly in front of the mic capsule. • Full range frequency response allows natural reproduction of all audio sources. • Tight hypercardioid polar pattern minimizes feedback problems. • High energy rare earth Neodymium element delivers high output and 6 dB of noiseless gain. • Rugged dynamic capsule enables usage with high sound pressure level signals (such as drums and amplified instruments). • Low impedance 600 ohm output enables strong, full bandwidth signal to be sent over long cable runs. • Lightweight and compact, the S12 can be easily handheld for long periods without inducing fatigue. • Mic-clip included. Contact: Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 • Phone: (516) 364-2244 • Fax: (516) 364-3888 • www.samsontech.com ARCHITECT’S & ENGINEER’S SPECIFICATION S12 SPECIFICATIONS Type: The microphone shall be of a dynamic type with hypercardioid polar pattern. The microphone shall provide its output on a male XLRtype connector. Output impedance shall be 600 ohms ±30%. The microphone shall contain a high-output Neodymium element with 6 dB of noiseless gain. The microphone shall have frequency response from 60 Hz to 18 kHz, sensitivity of -70 dB ± 3 dB, and a maximum input level of 130 dB SPL. Dimensions shall be 2" (51.5 mm) head length, 4.75″ (120.5 mm) main unit length and 6.75″ (172 mm) total length. Weight shall be 8.7 oz. (250 g). The microphone shall carry a three-year warranty. The microphone shall be a SAMSON S12. Dynamic Polar pattern: Hypercardioid Frequency response: 60 Hz - 18 kHz Sensitivity (0 dB = 1 V / 94 dB SPL@ 1 kHz): -70 dB ± 3 dB Max. input level (1 kHz, < 0.5% noise ratio): 130 dB SPL 600 Ω ±30% Output impedance (@ 1 kHz): Connector: 3-pin XLR male Dimensions 2″ / 51.5 mm Head length: Main unit length: 4.75″ / 120 mm Total length: 6.75″ / 172 mm Weight: 8.7 oz. / 250 g 0° 330° 30° 300° 60° 90° 270° 120° 240° 150° 210° 180° 300Hz 1000Hz 3000Hz A•B Span range : ___ B 0 Ref. 0dB Level : ___dB Writing Speed : ____sec. 0.5 Scale is 5 decibels per division 10 Paper Speed :____mm/sec. LINEAR SAMSON 5 10 1.0 Measuring Obj.; S-12 0 0 0.8 -5 -10 0.6 -10 -20 0.4 -15 -30 0.2 Date; 4/26/95 LC-056 -20 -40 dB 20 50 100 200 500 2000 1000 FREQUENCY Hz 5000 10000 0 20000 (Hz) V S/N Specifications subject to change without notice. © 1998 SAMSON