Transcript
Features and Benefits
®
w w w.apc.com
I
Wireless Mobile Router Quick Installation Guide Model WMR1000B
Note: The
purchaser must use APC's Wireless Mobile Router in full compliance with Federal Law and guidelines established by the local service provider.
Introduction Thank you for purchasing APC’s Wireless Mobile Router (Figure 1). This device provides connectivity up to 11 Mbps. It is designed for wireless mobile users needing internet sharing and networking in mobile and home/small office applications.
• Internet connection to DSL or cable modem via a 10/ 100 Mbs ethernet port • IEEE 802.11b compliant – interoperable with multiple vendor’s equipment • Provides roaming within 802.11b WAN/LAN environment • Dynamic Host Configuration Protocol (DHCP) for dynamic Internet Protocol (IP) configuration, and Domain Name Servicer/Service (DNS) for domain name mapping • Stateful Packet Inspection (SPI) firewall with client privileges, hacker prevention, and Network Address Translation (NAT) • NAT also enables multi-user access with a single-user account, and virtual server functionality (providing protected access to Internet services such as web, File Transfer Protocol (FTP), electronic mail and Telnet) • Virtual Private Network (VPN) support using PPTP, L2TP or IPSec pass-through • Easy setup through a web browser on any operating system that supports TCP/IP • Compatible with all popular Internet applications • USB or AC powered. • Integrates with APC’s TravelPower® Case (Figure 2) and is compatible with APC’s TravelPower Adapter. The TravelPower Case is sold separately and includes the TravelPower Adapter. For more information, go to www.apc.com. Wireless Mobile Router
TravelPower Case
• For wireless LAN connections, each computer must have a wireless network adapter installed • Internet access from your Internet Service Provider (ISP) using a Digital Suscriber Line (xDSL), cable modem, or Large Area Network (LAN) Dynamic Host Configuration Protocol (DHCP) service (protocol for automating the configuration of computers that use TCP/IP) • Transmission Control Protocol/Internet Protocol (TCP/IP) network protocol installed on each PC that needs to access the Internet
The Wireless Mobile Router can be powered using a USB cable (Step 1a), or by A/C power (Step 1b).
• Wireless Mobile Router (Model WMR1000B) • 5-Volt, 1-Amp AC/DC Power Adapter • Category 5 (CAT5) Ethernet Cable • Quick Installation Guide • Documentation CD • Universal Serial Bus (USB) Power Cable Please contact the reseller if any of the listed items are missing from the packaging.
5. 6. 7.
to the USB port of your laptop computer. Failure to comply may result in damage to your laptop computer.
Step 1a - Connect Power (USB Powered)
Power the Wireless Mobile Router using the USB cable (provided), as follows: 1. Connect one end of the USB cable to the APC TravelPower Adapter. 2. Connect the other end of the USB cable to the Wireless Mobile Router.
Figure 5. Wireless Mobile Router Connected to a DSL or Cable Modem Step 3 - Router Configuration
Before using the Wireless Mobile Router, it must be configured to the proper settings. To configure the Router, proceed as follows: 1. Open a web browser, such as Microsoft Internet Explorer or Netscape Navigator. 2. In the Address Line, enter an IP Address of 192.168.2.1. and press the Enter key (APC recommends setting up a password - see the User’s Manual on the software CD for more details). 3. The system will load the Login screen (Figure 6). By default, there is no password.
Troubleshooting Prior to contacting Technical Support, please refer to the User’s Manual located on the software CD, and to the technical information available at: www.apc.com.
Warranty The standard warranty is two (2) years from the date of purchase. APC’s standard procedure is to replace the original unit with a factory reconditioned unit. APC will ship the replacement unit once the defective unit has been received by the repair department, or crossship upon the receipt of a valid credit card number. The customer pays for shipping the unit to APC. APC pays ground freight transportation costs to ship the replacement unit to the customer.
Warranty Registration
Power the Wireless Mobile Router using the 230-volt power adapter provided with the router (Figure 4), as follows:
To register this product for purposes of the warranty, please go to warranty.apc.com.
1.
APC Contact Information
Connect one end of the adapter power cord to the Wireless Mobile Router. Connect the transformer block to a 230-volt power source.
System Requirements To use the Wireless Mobile Router, required system elements are as follows:
Figure 6. Login Screen
• A computer that runs a Microsoft® Windows®-based Operating System (OS) or Apple Macintosh OS • A web browser, such as Microsoft Internet Explorer® 5.0 or above, installed on one PC at the site for configuring the Router
Click on the Setup Wizard. Select your time zone and click Next. Select your broadband type and complete the on-screen instructions. For advanced setup features, refer to the User’s Manual on the software CD. Note: APC recommends using WEP security to protect against unauthorized access to the Router. For details on setting up WEP security, refer to the User’s Manual located on the documentation CD.
Step 1b - Connect Power (A/C Powered)
2. Figure 2. Wireless Mobile Router Connecter to APC’s TravelPower Adapter
Figure 7. Overview Screen
Caution: Do not connected the Wireless Mobile Router
Figure 3. Wireless Mobile Router Connected to APC’s TravelPower Adapter Using the USB Cable
Package Contents
Connect a DSL or cable modem on an existing network to the RJ-45 LAN/WAN port of the Wireless Mobile Router.
Three Step Installation
TravelPower Adapter
Figure 1. Wireless Mobile Router (Model WMR1000B)
Step 2 - Network Connection
4. Figure 4. Wireless Mobile Router AC/DC Adapter Connected to Wall Outlet
Press the Enter key to access the Overview screen (Figure 7).
Technical Support Internet USA and Canada France Asia-Pacific China Europe/Middle East/ Africa Worldwide
www.apc.com/support www.apc.com 800-800-4272 0800 906 483 (+65) 3896 823 (+86) (10) 8529 9888 (+353) 91 702020 (+1) 401 789 5735
990-1786A Copyright © 2004 American Power Conversion. All rights reserved. APC is a registered trademark of American Power Conversion. All other trademarks are the property of their respective owners.
