Transcript
I20 & I30 High-Performance Inwall Loudspeakers
Combining uncompromised Revel
ADVANCED DRIVERS
sound with versatility, the I20 and I30
For decades, speaker engineers have
exceed even the highest expectations
characterized the "ideal diaphragm
for
the
material” as stiff, light, and durable.
acclaimed Revel Ultima and Performa
Constructed with a new material
speakers, the I20 and I30 were sub-
called Organic Ceramic Composite
jected to meticulous listening evalua-
(OCC), the I20 and I30 midrange and
tions. As a result, these in-walls are
woofers
ideal complements to Ultima or
toward the attainment of that ideal.
Performa front speakers in multi-
Stiffer than conventional metal and
channel setups. They are also perfect-
lighter than most plastic or other com-
ly suited as front and surround
posite materials, OCC is a superior
speakers in complete in-wall setups,
material for driver diaphragms. When
or stereo pairs in secondary listening
used in midrange and woofer applica-
spaces.
tions, OCC offers more accurate pis-
in-wall
speakers.
Like
represents
a
milestone
tonic operation over the entire THE REVEL SOUND
frequency spectrum of the driver, dra-
Designed for discerning audiophiles,
matically reducing distortion and elim-
the I20 and I30 offer the superior,
inating coloration due to breakup. The
uncolored sound that is the hallmark
I20 and I30 both feature a 1-inch
of Revel speakers. Capable of much
tweeter with a pure titanium dome.
more than just background music, the
Like the OCC midrange and woofer,
in-walls benefit from Revel’s innova-
the titanium dome behaves like an
tive technologies, rigorous engineer-
ideal piston throughout its frequency
ing standards, and comprehensive
range. Ferrofluid liquid cooling con-
listening evaluations. The I20 and I30
tributes to freedom from dynamic
reproduce realistic, accurate sound with minimal coloration and distortion, making them suitable for the primary listening space.
I20 shown installed
I20 drivers
without grille
(top)
I20 crossovers
compression and helps assure high
The I20 and I30 accommodate even
power handling.
the most demanding listening spaces.
RIGID DESIGN
EASY INTEGRATION AND
To preserve sound quality, the I20 and
FLEXIBLE PLACEMENT
I30 feature rigid cast aluminum baffles
Four front panel controls provide con-
that are far less prone to flexing than
venient access to speaker fine-tuning
their plastic counterparts. The trans-
for integration with other speakers,
ducers feature cast aluminum frames
personal preferences, and placement
optimized to reduce resonance, ensur-
considerations.
ing minimal distortion and high per-
A listener axis control tailors the
formance. Ribs on the woofer frames
speaker characteristics for placement
integrate with the baffle, further
off-axis, allowing for increased place-
strengthening the entire structure.
ment options. A high-frequency tilt control increases the level of the upper
To avoid coloration, the I20 and I30
range of the tweeter while a high-fre-
are designed to maintain consistent
quency level control adjusts the
sound quality over a wide range of
tweeter output level relative to the
angles. Their sonic character off-axis is
other transducers. Together, these
very similar to their on-axis sound. As
controls allow for precise adjustment
a result, both direct and reflected
of the high-frequency balance for
sounds arrive at the listeners’ ears with
integration with other speakers in the
similar timbral signatures.
listening room. A low frequency boundary compensation control tailors the low frequency output of the speaker for installation close to an adjacent wall, ceiling, floor, or corner.
I30 crossovers
I30 drivers
I30 shown installed
(top)
without grille
Specifications I20
I30
Woofer:
7.5” (7.5-inch)
9” (9-inch)
Midrange:
-
3.5”
Tweeter:
1”
1”
System Frequency Response: (±3dB)
40Hz* - 20,000Hz
32Hz* - 20,000Hz
Sensitivity: (2.83V @ 1 meter)
87dB
89dB
Recommended Amplifier Power Range:
15 - 150 Watts
15 - 200 Watts
Nominal Impedance:
8 Ohms
8 Ohms
Crossover Frequency:
2.8kHz; 24dB/octave
Dimensions:
width: height: depth:
300Hz, 2.0kHz; 24dB/octave
13" (330mm) 17.875" (454mm) 3.5" (89mm)
14.875" (378mm) 22.125" (562mm) 3.5" (89mm)
Wall Cutout width: 10.5" (267mm) height: 14.875" (378mm)
12.5" (318mm) 19.125" (486mm)
*will vary depending on installation
Specifications are subject to change without notice.
Revel ® and the Revel logo are registered trademarks of Harman International Industries, Incorporated. Not responsible for typographic errors. Part # 072-16192 Rev. 1
3 Oak Park, Bedford, MA 01730-1413 USA Te l : 7 8 1 - 2 8 0 - 0 3 0 0 | F a x : 7 8 1 - 2 8 0 - 0 4 9 0 www.har manspecialtygroup.com
harman specialty group
