Preview only show first 10 pages with watermark. For full document please download

I378_nvr Wifi Setting

   EMBED

Share

Transcript

I8 DVR WIFI Setting To use the WIFI function, first, you should make sure that there is a WIFI router in the area where your NVR is. Second, you should buy an extra WIFI device (We suggest Tenda W311M & W811M) Below is a picture for your reference: Then pls insert it into the USB port of the NVR, and enter the network setting interface: And then enable WI-FI and click “WI-FI” to enter the WIFI setting interface as shown in the below picture: Then pls click “Refresh” and the wifi information will appear in the above column. And then double click the wifi information. And then fill in the password of your wifi network below. Then modify the IP, subnet mask, default gateway, DNS server address information according to your own network section. After finish all the settings, click OK. Then you can use the IP address to view though network.