Transcript
iANT216 Dual Band Wi-Fi Antenna
Use in hazardous areas The iANT216 has been assessed by Extronics engineers as meeting the international intrinsic safety standards for simple apparatus. This means it’s safe to use in hazardous areas when connected to a suitable certified wireless device with an intrinsically safe RF output, such as the iWAP107 or other solutions using the iSOLATE501. The iANT216 antenna cannot be used in the hazardous area when connected to an RF source that is not intrinsically safe. Easy to mount The antenna can be easily mounted and positioned either an aluminium or a 316 stainless steel bracket.
Assessed as simple apparatus Omni-directional 2.4GHz and 5GHz antenna Suitable for Groups I, II, III IP67 and highly rugged
Optimised for WLAN applications The iANT216 is optimised for use in WLAN installations in the 2.4GHz/5.8GHz spectrum for IEEE802.11 b/g/n/ac wireless networks or 2.4GHz/5.8GHz wireless mesh Ethernet networks. The dual band functionality ensures users can install the latest hardware which utilises both the 2.4 & 5GHz frequencies at the same time, or change their wireless device operating frequency without the need to replace antennas. Indoor and outdoor use The iANT216 can be used both indoors and outdoors. It’s made from durable UV-resistant ABS plastic with good thermal shock resistance. Rated to IP66 and with a temperature range of -20°C to +70°C, the iANT217 is suitable for most applications.
Extronics Limited 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail:
[email protected] Web: www.extronics.com
403446-2.0
Copyright © Extronics Ltd 2016. The information contained in this document is subject to change without notice. Extronics cannot be held responsible for an y errors or inaccuracies within this document.
Specification Frequency band
2.4-2.5GHz 4.94-5.925GHz
Gain
5dBi @ 2.4GHz 7dBi @ 5GHz
VSWR
<2
Polarisation
Vertical
Horizontal plane beam width
360° 2.4GHz Omni 5GHz
Vertical plane beam width
25° 2.4Ghz 15° 5GHz
Composite power max
75W @ 25°C
Nominal input impedance
50 Ohm
Wind speed
125mph
Temperature range
-40° C to +70° C
Radome material
White UV-resistant ABS
Ingress protection
IP67
Dimensions
260 mm x 30 mm
Weight
300g
RF connection
N-type male
Ordering Information iANT216 dual band Wi-Fi antenna
IANT216
Aluminium pole mount bracket for iANT216
IANTMB07
Extronics Limited 1 Dalton Way, Midpoint 18, Middlewich, Cheshire, UK. CW10 0HU Tel: +44 (0) 845 277 5000 Fax: +44 (0)845 277 4000 E-mail:
[email protected] Web: www.extronics.com
403446-2.0
Copyright © Extronics Ltd 2016. The information contained in this document is subject to change without notice. Extronics cannot be held responsible for an y errors or inaccuracies within this document.