Preview only show first 10 pages with watermark. For full document please download

Ib1550-sfp

   EMBED


Share

Transcript

RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 Features  Telecordia GR-253-GORE and ITU-T Recommendation G.957 application  Industry standard small form pluggable (SFP) package  Simplex LC connector  Single power supply 3.3V  TTL signal detect indicator  Hot Pluggable  Class 1 laser product complies with EN 60825-1 Ordering Information PART NUMBER TX/RX INPUT/OUTPUT LOS TEMPERATURE LD Type IB1550-SFP-LC.S120 1550/1490 AC/AC LVTTL 0C to 70 C 1550 DFB Page 1 of 8 Version 1.0 Date:04/19/2012 TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 Diagnostics Parameter Range Accuracy Unit Module internal temperature Module internal voltage Bias Current -10 to 80 ±3 3.1 to 3.5 ± 0.1 V 0 to 100 ± 10% mA TX Power -4 to +6 ± 3 dB dBm RX Power -30 to -9 ± 3 dB dBm o Calibration C Internal Absolute Maximum Ratings PARAMETER SYMBOL MIN MAX UNITS TS 40 85 C Supply Voltage Vcc 0.5 4.0 V Input Voltage VIN 0.5 Vcc V Optical input power Pin --- -8 dBm @1490nm SYMBOL MIN MAX UNITS NOTE TC 0 70 C Supply Voltage Vcc 3.1 3.5 V Supply Current ITX + IRX --- 300 mA Optical path loss Loss 12 ~ 29 dB Optical fiber --- ITU-T G.652(SMF) --- Distance D --- 120 Km Optical path dispersion penalty --- --- 2 dB Storage Temperature NOTE Recommended Operating Conditions PARAMETER Case Operating Temperature Page 2 of 8 Version 1.0 Date:04/19/2012 TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 Transmitter Electro-optical Characteristics Vcc = 3.1 V to 3.5 V, TC = 0 C to 70 C PARAMETER SYMBOL MIN TYP. MAX UNITS B --- 2488 --- Mbps Output Optical Power 9/125 m fiber Pout -1 --- +3 dBm Extinction Ratio ER 6 --- --- dB Bit Rate Output Eye RIN --- --- 120 dB/Hz Output rise/fall time(20-80%) Tr,f --- --- 160 ps Center Wavelength C 1540 1550 1560 nm Spectral Width (-20dB)  --- --- 0.5 nm SMSR 30 Output Eye dB Compliant with Telcordia GR-253-CORE Issue 3 and ITU-T recommendation G-957 Max. Pout TX-DISABLE Asserted POFF --- --- 45 dBm Differential Input Voltage VDIFF 0.4 --- 2.0 V Page 3 of 8 Version 1.0 Date:04/19/2012 Average Compliant with Telcordia GR-253-CORE Issue 3 and ITU-T recommendation G-957 Relative Intensity Noise Side Mode Suppression Ratio NOTE TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 Receiver Electro-optical Characteristics Vcc = 3.1 V to 3.5 V, TC = 0 C to 70 C PARAMETER SYMBOL MIN TYP. MAX UNITS B --- 2488 --- Mbps Optical Input Power-maximum Optical Input Power-minimum (Sensitivity) PIN -9 --- --- dBm BER < 1010 PIN --- --- 30 dBm BER < 1010 Operating Center Wavelength C 1480 --- 1500 nm ORL 14 --- --- dB Loss of signal -Deasserted PD --- --- 30 dBm Loss of signal -Asserted PA 45 --- --- dBm VDIFF 0.5 --- 1.2 V RX_LOSL 0 --- 0.5 V RX_LOSH 2.4 --- VCC V Bit Rate Optical Return Loss Differential Output Voltage Receiver Loss of Signal Output Voltage-Low Receiver Loss of Signal Output Voltage-High Page 4 of 8 Version 1.0 Date:04/19/2012 TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp NOTE =1480~1500nm RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 Dimensions 8.50¡ Ó 0.1 0.60¡ Ó 0.4 13.40¡ Ó 0.1 Tc point 13.70 55.50 14.6¡ Ó 0.4 45.00 1.80 13.50¡ Ó 0.3 8.00 41.80¡ Ó 0.15 DIMENSIONS ARE IN MILLIMETERS ALL DIMENSIONS ARE 0.2mm UNLESS OTHERWISE SPECIFIED Page 5 of 8 Version 1.0 Date:04/19/2012 TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 SFP host board mechanical layout X Y S XY A 1 LXA S 1 PIN1 LXA S LEGEND A SB S PIN1 1.PADS AND VIAS ARE CHASSIS GROUND 2.THROUGH HOLES, PLATING OPTIONAL 3.HATCHED AREA DENOTES COMPONENT AND TRACE KEEPOUT(EXCEPT CHASSIS GROUND) 4.AREA DENOTES COMPONENT KEEPOUT (TRACES ALLOWED) DIMENSIONS ARE IN MILLIMETERS A SB S A SB S Unit: mm Page 6 of 8 Version 1.0 Date:04/19/2012 TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 Pin Assignment Pin-Out Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PIN 11 PIN 20 PIN 10 PIN 1 Signal Name Description TGND TX_FAULT TX_DISABLE MOD_DEF (2) MOD_DEF (1) MOD_DEF (0) RATE SELECT RX_LOS RGND RGND RGND Transmit Ground Transmit Fault Transmit Disable SDA Serial Data Signal SCL Serial Clock Signal TTL Low Open Circuit Receiver Loss of Signal, TTL High, open collector Receiver Ground Receiver Ground Receiver Ground Receive Data Bar, Differential PECL, ac coupled Receive Data, Differential PECL, ac coupled Receiver Ground Receiver Power Supply Transmitter Power Supply Transmitter Ground Transmit Data, Differential PCEL, ac coupled Transmit Data Bar, Differential PCEL, ac coupled Transmitter Ground RX RX RGND VCCR VCCT TGND TX TX TGND Page 7 of 8 Version 1.0 Date:04/19/2012 TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp RoHS compliant TX-1550/RX-1490 nm Single-mode Bi-directional , 120km SFP LC Simplex Connector , with Diagnostic Monitoring OC48/STM16 Eye Safety Mark The LS4 series singlemode transceiver is a class 1 laser product. It complies with EN 60825-1 and FDA 21 CFR 1040.10 and 1040.11. In order to meet laser safety requirements the transceiver shall be operated within the Absolute Maximum Ratings. Required Mark Class 1 Laser Product Complies with 21 CFR 1040.10 and 1040.11 Caution All adjustments have been done at the factory before the shipment of the devices. No maintenance and user serviceable part is required. Tampering with and modifying the performance of the device will result in voided product warranty. Note : All information contained in this document is subject to change without notice. Page 8 of 8 Version 1.0 Date:04/19/2012 TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp