Transcript
Hardware
Software
Training
Applications
ibaNet750-BM In brief ■■ Decentralized input and output system ■■ Bus connection for WAGO-I/O-System 750 ■■ 32 analog inputs and outputs per station ■■ 32 digital inputs and outputs per station ■■ Line topology for input and output functions ■■ Ring topologies for input and output processes ■■ Stand-alone mode ■■ Interface control ■■ Robust plastic enclosure ■■ Assembly on the mounting rail
Characteristics ibaNet750-BM is a device designed to extend the iba I/O functionality range using the I/O modules series 750 produced by WAGO/Beckhoff. The device acts as a gateway between the serial KBUS and the deterministic fiber optic ibaNet network. The device is mostly used in ibaLogic Soft-PLC applications. ibaNet750-BM is the ideal supplement for the range of the peripheral devices. Incremental encoders, SSI-inputs, RTDs, thermocouples and measuring bridges can be integrated into these processes. Different actuator outputs are available.
Realization of a variety of applications
Characteristics of fiber optical interface
■■ I/O-expansion for VMEbus systems with ibaLink-SM128V-i-2o master interfaces (ring or star)
■■ Performs input and output functionality at the same time ■■ Star- and ring topology, can also be used to replace bundles of copper wiring without a PC involved (ring)
■■ Process data acquisition in star-shaped topology with daisy-chain of devices (like ibaPADU-8) ■■ I/O system for ibaLogic Soft-PLC (ring) ■■ I/O-expansion of Siemens Simatic S5 115U, 135U, 155U and 150U with ibaLink-SM-64-io as master interface (needs only 1 slot within the rack) ■■ I/O-expansion of Siemens Simicro MMC216 with ibaLink-SM-64-io
■■ Replacement for copper wires (up to 8 x 136 binary signals in each direction) with only 2 optical fibers over up to 1.28 mls (2 km) distance between single devices
■■ 32 + 32 analog inputs/outputs plus 32 + 32 binary inputs/ outputs per device
ibaNet750-BM devices are usually connected to ibaFOB-4i resp. ibaFOB-4o cards which are installed in a PC. These intelligent fiber optic interface cards provide the process image in a dual-ported ram. The software (e. g. ibaPDA) may read and write the data in its own scan cycle down to 1 ms.
■■ Or up to 512 + 32 binary inputs plus 512 + 32 binary outputs
The following devices exist within the large I/O product family of iba
■■ Or 8 complex terminals, e.g. SSI or incremental encoders + 32 binary inputs plus 8 binary outputs
■■ ibaPADU-8 (±10 V inputs)
■■ Integrated power supply for I/O-modules (max. 1.5 A internal load)
■■ ibaPADU-8-I (±20 mA inputs)
■■ Up to 1.28 mls (2 km) distance between devices ■■ Up to 8 device addresses per ring or star; fiber optic compatible to ibaPADU-8 and ibaPADU-8-O
■■ There are restrictions in combination with ibaPDA concerning the sampling time of the terminals. Due to the internal serial bus of the device (KBUS) no simultaneous process image can be guaranteed below 10 ms sampling time (ibaPADU-8 guarantees 1 ms) ■■ Device can be used as copper wire replacement without a PC involved ■■ All devices on the ibaNet bus will be updated in exact 1 ms cycles
■■ ibaPADU-8-HI (±10 V, 500 Ω) ■■ ibaPADU-16 (16A & 16D) ■■ ibaPADU-32 (32A & 32D, table version) ■■ ibaPADU-32-R (19”rackmount version) ■■ ibaPADU-8-O (output device for open and closed loop control applications) ■■ ibaBM-FOX-i-3o splits 1 optical input to 3 optical outputs, signal regenerations for distances greater than 1.28 mls (2 km) ■■ ibaBM-SLM (SIMOLINK monitor) ■■ ibaBM-DDCSM (ABB DDCS bus monitor) ■■ ibaLink-SM-64-io (SIMATIK S5 (all), MMC216 and ibaLink-SM-128V-i-2o (VME buses)
www.iba-ag.com
Technical data
Description
ibaNet750-BM, Coupling system for WAGO I/O-System 750
Order number
15.140000
Dimensions
1.97 inch x 3.94 inch x 3.15 inch (50 mm x 100 mm x 80 mm)
Weight (incl. packaging)
0.3 kg
Power supply
DC +24 V (±10 %), 24 V load power supply external
Current consumption – integrated 24 V supply
80 mA ±20 % operating, cold start consumption up to 4 times higher (without load power supply and without terminals)
Temperature conditions
32 °F to 122 °F (0 °C to 50 °C) (In use)/-13 °F to 149 °F ( -25 °C to 70 °C) (Storage)
I/O-modules Binary inputs (BI)
Typ. 32 BI Maximum: 32 + up to 512 BI
Max. by replacing 32 analog inputs (1 AI = 16 BI, interpretation with ibaLogic only)
Order number
Module type
Short description
15.144000
ibaNet750-BM 2-Chan DI 3 ms
2-Channel Digital Input 24 V, 3 ms input filter
15.144010
ibaNet750-BM 2-Chan DI 0.2 ms
2-Channel Digital Input 24 V, 0.2 ms input filter
15.144020
ibaNet750-BM 4-Chan DI 3 ms
4 Channel Digital Input 24 V, 3 ms input filter
15.144030
ibaNet750-BM 4-Chan DI 0.2 ms
4 Channel Digital Input 24 V , 0.2 ms input filter
Analog Inputs (AI)
Maximum 32 AI
Each unused analog input can be replaced by 16 digital inputs
15.144560
ibaNet750-BM 2-Chan AI
2-Channel analog input; ±10 V differential input
15.144610
ibaNet750-BM 2-Chan PT100
2-Channel analog input RTD (all types)
15.144620
ibaNet750-BM 2-Chan Thermo couple
2-Channel thermo couple inputs (all types)
Binary Outputs (BO)
Typical 32 BO Maximum: 32 + up to 512 BO
Max. by replacing 32 analog inputs (1 AO = 16 BO, interpretation with ibaLogic only)
15.145010
ibaNet750-BM 2-Chan DO 0.5 A
2-Channel digital output 0.5 A/24 V
15.145020
ibaNet750-BM 2-Chan DO 2 A
2-Channel digital output 2 A/24 V
15.145040
ibaNet750-BM 4-Chan DO 0.5 A
4-Channel digital output 0.5 A/24 V
Analog Outputs (AO)
Maximal 32 AO
15.145560
ibaNet750-BM 2-Chan AO
Analog output ±10 V
Complex Terminals
Maximum 8
A complex terminal replaces 4 analog inputs (= 2 modules)
15.146300
ibaNet750-BM SSI Input
SSI input module 1 channel
15.146310
ibaNet750-BM Incr. Encoder
Incremental encoder 0 degrees/90 degrees, 1 channel
15.146000
ibaNet750-BM End-Terminal
End-terminal for ibaNet750-BM, always needed
15.146120
ibaNet750-BM Power Supply
Supply terminal 230 V/24 V
15.146140
ibaNet750-BM Power Distr. Mod
Power supply distribution module
ibaLink-SM-64-io
ibaLink-SM-128V-i-2o
Diverse terminals
Front view and connectors S1: Device address (1..B), S2: Device mode, (0 = Run; 1 = Ring master; F = Ring slave)
Fiber optic connectors
2 connectors ST-type
Transmitter and receiver
Power supply
DC 24 V, 6 to 9 V Aux.-power (optical ring buffering)
2 pole jack (Phoenix)
Status displays
LEDs: Run (Green) Link (Yellow) Error (Red) (for ibaNet bus side) IO Error (Red) and IO Run (Green) (for module bus side (KBUS))
Data transmission Transmission speed
3.3 Mbit/s
Net data per block
Max. 64 analog plus 64 binary signals per link
Update rate
1 ms (64 + 64 signals/ms)
ibaFOB-4o
Note: The range of available module types is beeing extended continuously!
iba AG Koenigswarterstr. 44 • 90762 Fuerth • Germany • Phone: +49 911 97282 0 • Fax: +49 911 97282 33 • E-Mail:
[email protected] • www.iba-ag.com
Messtechnik- und Automatisierungssysteme Measurement and Automation Systems
Flyer_ibaNet750-BM_v1.4_en 02/2013 Technical changes reserved
Decade switches
