Transcript
Chapter
IC280A February 2010 MT1000A-85-R4
USB 2.0 CAT5e Extender
Quick Start Guide
BLACK BOX
®
Transmit USB 2.0 device signals up to 328 feet over CAT5e, and power it locally or remotely.
Specifications Before you get started, make sure that all drivers required for your USB device are installed. 1. Place the units where desired, and connect the CAT5e solidcore extension link cabling to the link ports (RJ-45) on the Local Extender and the Remote Extender.
3. Connect the Local Extender to a computer with the included USB cable. Computer
2. Connect the power adapter to the desired unit—either the Local Extender or the Remote Extender. Figure QS-2. Connecting the Local Extender to the computer. 4. Attach the USB device to the Remote Extender.
Local Extender
CAT5e cable (not included), up to 328 ft. (100 m) long
Remote Extender
Figure QS-1. Connecting the Local Extender to the Remote Extender and installing the power adapter.
Figure QS-3. Connecting the USB device to the Remote Extender. IC280A QSG, version 1
© Copyright 2012. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond™ is a trademark of BB Technologies, Inc. Any third-party trademarks appearing in this manual are acknowledged to be the property of their respective owners.
Customer Support Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail:
[email protected]
