Transcript
®
ICE 1006 Series Cube ICE Maker
✓ Produces up to 1201 lbs. (546 Kgs.)* of ICE per day ✓ Constructed from sturdy, corrosion-resistant 300 series stainless steel
✓ Ultra-low profile - 26 inches (660 mm) tall ✓ Available with an air-, water- or remote-cooled condenser ICE 1006 on a B55 Bin
ICE-O-Matic is the Best ICE Making Solution for: Hard Water, Food Safety and Tight Spaces ®
Solution
Problem Food Safety
PURE ICE ™ - Exclusively by ICE-O-Matic®
Food safety concerns about slime- and odor-causing bacteria
Built-in antimicrobial protection for the life of the machine prevents bacteria and slime fungus growth. ICE-O-Matic’s® optional water filtration system provides protection against unpleasant tastes, odors and scale formation.
Hard Water
Harvest Assist
Scaling due to hard water slows Ice production
Consistent ICE production 24/7 by pushing the ICE into the bin rather than waiting for gravity to overpower the scale
Tight-Fitting Spaces
Maximum ICE
Inadequate air flow due to tight-fitting spaces reduces Ice production
Maximum ICE production in a minimum amount of space with an ultra-low profile - 30 inches wide / 26 inches tall
Corrosion
Sea Salt Corrosion Protection
Salt air corrosion of outdoor equipment located in coastal regions
All remote condensers are coated with a salt air corrosion protection – FREE
*Rated at 70 ° (21°) Air/50° (10°) Water
Dimensions and Air Flow Air in-rear of icemaker
7/8" (22 mm) DIA. HOLE FOR REMOTE CONNECTIONS 7/8" (22 mm) DIA. HOLE FOR ELECTRICAL CONNECTIONS ELECTRICAL CONNECTION JUNCTION BOX
30.00" (762 mm)
Air Out (side discharge)
24" (610 mm)
30" (762 mm)
ICEMAKER POTABLE WATER IN 3/8" (10 mm) FPT
CONDENSER-WATER OUT 1/2" (13mm) FPT CONDENSER-WATER IN 3/8" (10mm) FPT
26" (660 mm)
22.24" (565 mm) 20.49" (521 mm)
2.00" (51 mm) 5.94" 2.63" (151 mm) (67 mm)
.62" (16 mm)
76" (1930 mm)
5.00" (127 mm) 9.81" (249 mm)
HARDWARE FOR STRAP MOUNTING TO BIN
0.70" (18 mm) 5.00" (127 mm)
ICEMAKER-WATER OUT 3/4" (19 mm) FPT DISCHARGE LINE, 1/2" (13 mm) MALE QUICK CONNECT COUPLING FOR USE WITH RT-325-404 OR RT-340-404 PRECHARGED LINE SET (REMOTE ONLY)
2.31" (59 mm)
REAR VIEW (WATER/REMOTE COOLED)
LIQUID LINE, 3/8" (10 mm) MALE QUICK CONNECT COUPLING FOR USE WITH RT-325-404 OR RT-340-404 PRECHARGED LINE SET (REMOTE ONLY)
22.24" (565 mm) 20.49" (521 mm)
31" (787 mm)
5.94" (151 mm) 2.63" (67 mm)
ICE PRODUCTION CHART POUNDS (KILOGRAMS) PER 24 HOURS ICE 1006 Conds. Unit
Air Temp. °F (°C)
Air Cooled
Water Cooled
Remote Cooled
REAR VIEW (AIR COOLED)
ICE 1005
Water Temp. °F (°C) 80°(27°) 70°(21°) 50°(10°)
Air Temp. °F (°C)
754 (343)
811 (369)
930 (423)
90° (32°)
690 (314)
742 (337)
856 (389)
80° (27°)
862 (392)
927 (421)
1020 (463)
80° (27°)
796 (362)
856 (389)
942 (428)
70° (21°)
938 (426)
1008 (458) 1109 (504)
70° (21°)
868 (395)
934 (424)
1027 (467)
90° (32°)
875 (398)
941 (428)
1013 (460)
90° (32°)
853 (388)
917 (417)
985 (448)
80° (27°)
902 (410)
970 (441)
1067 (485)
80° (27°)
876 (398)
942 (428)
1036 (471)
70° (21°)
948 (431)
1019 (463) 1121 (510)
70° (21°)
919 (418)
988 (449)
1087 (494)
90° (32°)
842 (383)
905 (411)
1023 (465)
90° (32°)
745 (339)
801 (364)
911 (414)
80° (27°)
940 (427)
1011 (460)
1112 (506)
80° (27°)
840 (382)
904 (411)
994 (452)
70° (21°)
1015 (461)
1092 (496) 1201 (546)
70° (21°)
910 (414)
979 (445)
1077 (490)
50° (10°)
1225 (557)
50° (10°)
1099 (499)
30° (-1°)
1250 (568)
30° (-1°)
1121 (509)
1275 (579)
0.70" (18 mm)
Water Temp. °F (°C) 80°(27°) 70°(21°) 50°(10°)
90° (32°)
0° (-18°)
0° (-18°)
1143 (520)
1. 90°/ 70° figures are rated in accordance with ARI Standard 810. All remaining points are mathematical estimates. 2. All specifications and performance data are subject to normal manufacturing variances.
Half Cube 7/8" x 7/8" x 3/8" (22mm x 22mm x 10mm) Full Cube 7/8" x 7/8" x 7/8" (22mm x 22mm x 22mm)
OPERATING LIMITS Ambient Temp. Range Air & Water Remote
50° - 110°F (10° - 43°C) -20° - 110°F (-29° - 43°C)
Water Temp. Range
40° - 100°F (4.5° - 38°C)
Water Pressure Ice Maker Water in
Min. 20 psi (1.4 bar) Max. 60 psi (6.9 bar)
Condenser Inlet Water (Water cooled only)
Min. 20 psi (1.4 bar) Max. 60 psi (6.9 bar)
ORDERING AND SPECIFICATION INFORMATION
Model No.
50 Hz 60 Hz
ICE1006•A ICE1006•W ICE1006•R ICE1005•A ICE1005•W ICE1005•R
Cond. Unit
Air Water Remote Air Water Remote
Ice Production per 24 hrs. at 70° Air/50° Water lbs. (Kgs.)
1109 1121 1201 1027 1087 1077
(504) (510) (546) (467) (494) (490)
Water Used-Gals. (Lits.) per 100 lbs. of Ice 90° Air/70° Water
Ice Production per 24 hrs. at 90° Air/70° Water lbs. (Kgs.)
811 941 905 742 917 801
(369) (428) (411) (337) (417) (364)
20.6 23.7 19.1 21.8 23.6 22.4
(78) (90) (72) (83) (89) (85)
Kilowatts Used per 100 lbs. of Ice 90° Air 70° Water
Btuh
Voltage Characteristics
No. of Wires
Min. Circuit Amp.
Max. Fuse Size
5.4 3.8 5.4 6.0 4.0 5.5
16239 15986 18149 15699 16005 16127
208-230/60/1 208-230/60/1 208-230/60/1 230/50/1 230/50/1 230/50/1
3 3 3 3 3 3
13.8 9.0 13.8 13.3 9.5 15.1
20 20 20 15 15 15
n/a 169.8 (643) n/a n/a 170.5 (645) n/a
ERC-2061 Remote Condenser for 1 model ICE1000R (208-230/50-60/1 voltage) ERC-2062 Remote Condenser for 1 or 2 model ICE1000R (208-230/50-60/1 voltage) RT-325-404 25 ft. (7.6m) Precharged Tubing Kit for R-404A models RT-340-404 40 ft. (12m) Precharged Tubing Kit for R-404A models RT-345-404 45 ft. (13.7m) Precharged Tubing Kit for R-404A models RT-360-404 60 ft. (18.2m) Precharged Tubing Kit for R-404A models See Bin specification sheet for information on ice storage bins
Shipping Weight lbs. (Kgs.)
225 225 225 225 225 225
(102) (102) (102) (102) (102) (102)
95 (43) 125 (57) 13 (6) 18 (8) 19 (9) 26 (12)
• represents cube size. For full cube substitute an “F”, for half cube substitute an “H”. Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust. S
O
0
I
F
0
I
1
9
D
C E
R
T
I
E
ICE 1006 Series Cube ICE Maker
3.44" (87 mm)
We reserve the right to make changes in design and construction at any time without obligation. 2003 ©ICE-O-Matic Rev Code: 1011B-07/03-SS
® ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239 Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com
