î N9 - Support Veranstaltungstechnik

Transcript

ID-No. 16425 Dimmers îN9$ A pplication: Simple dimming of resistive, inductive and capacitive loads that can be controlled using a lighting console (DMX512 or a similar unit) or independently using many control functions. Can be used as a single dimmer pack or in the flight case (rack). D escription: Alex M is a compact rack-mountable dimmer (shown here with 6 x 5 kVA thyristor power modules). Many functions that can be set using menus allow for a wide range of applications. You can use the DMX512 or 0-10V analog for control. When the input signal is lost, you can choose to output the last cue, switch off the outputs or to fade in an auxiliary group. All settings are stored in a non-volatile EEPROM and can be changed at any time. F q eatures: q q q q q q q q q q 12 auxiliary groups operated independently from the lighting console 5 control curves, incl. NONDIM 1 chaser with adjustable hold and fade-times and independent sequence selection Individual 0–30 % preheat setting for each channel Output limit adjustable from 30–100 % for each channel Temperature-controlled forced cooling Operating hours meter Menu-controlled setting with buttons and encoder Luminous display showing the operating status and important settings 1 x DMX-in; 1 x DMX-out; 1 x debug interface for connecting to a PC Individual DMX-Address for each channel Technical data Interfaces DMX (5-pin XLR) RS 232 (9-pin submin-D male connector) Analog (15-pin submin-D female connector ) Multicore output socket, protected with 6 C25 A miniature circuit breakers Connection cable, CEE plug Power supply 3 x 230 V (+15 % –10%); 48–52 Hz; 3 x 32 A Displays Luminous display Dimensions 482 x 380 x 133.5 mm (LxWxH); (19” 3HE) Weight 26 kg Special features q q q q Digital thyristor dimmer Operation of resistive, inductive and capacitive loads Sturdy construction Ideal for operation on the road with the stand-alone operation option Connect only such electronic transformers and ballast's to the dimmer that have been approved by the manufacturer for dimmer operation. Please contact transtechnik when in doubt. Luminous display Function keys and encoder Page CH1 3 4 5 6 Edit Esc Alex M 6x5 6 C25 A miniature circuit breakers Switch for DMX RS 232 interfaces DMX END Link RS 232 Ext Ch 1-3 FI Ch 4-6 Multicore output connectors for dimmer channel 1-6 2 Save Power 3x400V/N/PE Inlet aperture for fan Input: 3 x 230 V power outlet Version: 09.04.99 FI circuit breaker as option DMXout/in 5-pin XLR DMX input/ output transtechnik transtechnik2KPVWUD‰H²'+RO]NLUFKHQ7HO )D[  ,QWHUQHWZZZWUDQVWHFKQLNFRPH0DLOLQIR#WUDQVWHFKQLNFRP