Icx400 Series High Performance Managed 802.11ac Access Points

Transcript

ICX400 Series High Performance Managed 802.11ac Access Points Unified Network Device ICX400 Series 802.11ac Access Points Overview ICX400 Series 802.11ac Access Points The explosion in demand for content, expanded use in how wireless mobility devices are used, as well as the variety of devices being used, push the need for higher performing wireless mobility networks. Speed is only one factor. The type of data being processed has also changed. Users now use multiple devices, streaming technology, and high definition resulting in the need for a more intelligent network. ICC is at the forefront of software-driven systems designed to not only keep a connection, but more importantly ensure delivery of content. The ICC ICX400 Series of 802.11ac high performance access points not only ensure advanced 600Mbps 11n and 1.3Gbps on 11a, but also use advanced features to ensure content is secure, routed, and delivered due to the additional levels of efficiency derived within the icXchange solution. Solution Highlights Rear The ICX400G platforms were designed as unified performance devices. There are two versions, ICX400GAP and the ICX420GAP, each designed to meet the needs of different market segments while addressing cost of ownership concerns. The ICX400 is a 2x2 MIMO 802.11ac that meets the needs of education, public sector, hospitality, and multi-location deployments. The ICX420GAP is a 3x3 MIMO 802.11ac that lives up to the high performance and high definition requirements for the most demanding enterprise ecosystem. The ICX400 Series APs software-driven solution apply not only filtering and flow classification, but layer on automatic identification of clients, enhanced multicast, and mapping of data streams to ensure QoS policies are followed. Built to delivery connectivity, these various levels ensure not just connectivity but also delivery of content. www.intcomcorp.com ICX400 Series Technical Specification Unified Network Device IEEE 802.11 Technology IEEE802.11n and 802.11ac Dual mode and Dual band 3 x 3 MIMO 2 x 2 MIMO Interface 10/100 Base-T Ethernet (RJ-45 port) 10/100/1000 Base-T Ethernet (RJ-45 Console port (RJ-45) USB 2.0 Mechanical Dimensions Weight Antenna 2.4GHz 5GHz ICX400GAP ICX420GAP               7.8 W x 6.6L x 1.5H 1.8lbs 7.8 W x 6.6L x 1.5H 1.8lbs Internal at 4bdi Internal at 5dbi Internal at 4bdi Internal at 5dbi Wireless mobility users continue to demonstrate that there’s little limit to their appetite for being and staying connected everywhere. Connectivity is no longer an option, but is mandatory and remains part of the decision of the customer when looking for hotels, coffee shops, neighborhoods, and any other place where we spent any amount of time. This explosion in device use also raises issues of security, bandwidth quality, content delivery, and other potential performance issues. The ICX400 series APs resolve these issues either as a stand-alone AP or as part of the much larger and intelligent Link series ACS platform. At ICC we address these concerns with software-driven systems combined with advanced hardware platforms designed to be flexible to match the needs of any user. Call admission control (CAC) Power saving mode Wireless network VAS Multicast enhancement IP address setting IPv6 forwarding IPv6 portal Security  802.1x authentication  Captive portal authentication  MAC address authentication  LDAP authentication  WAPI encryption and authentication  Wired/wireless integrated authentication and accounting www.intcomcorp.com IP Data Traffic Management  AP load balancing based on traffic  AP load balancing based on the number of users  AP load balancing based on frequency bands  Access control based on signal strength of terminals  User Isolation  WIDS ICX400 Series Technical Specification Unified Network Device Dimensions 200 x 170 x 40 (mm) 7.8 x 6.7 x 1.6 (in) 10/100/1000Base-T port 2 Console port (RJ-45) 1 USB 2.0 port: 1 Power-over-Ethernet: 802.3af /802.3at Local power: External power adapter Input: 100~240V AC , Output: 12 V DC Max power usage: <13W(no USB) Memory: 256MB DDR3 32 MB Flash RF Port: Built-in 2.4 GHz 4 dBi antenna and 5 GHz 5 dBi antenna Built-in 2.4 GHz 4 dBi antenna and 5 GHz 5 dBi antenna Working frequency bands: 802.11a/n: 5.150 GHz to 5.850 GHz 802.11b/g/n: 2.4 GHz to 2.483 GHz 802.11ac: 5.150GHz to 5.250GHz 5.250GHz to 5.350GHz 5.725GHz to 5.850GHz Modulation: 802.11b,BPSK,QPSK,CCK 802.11a/g/n:BPSK,QPSK,16QAM,64-QAM 802.11ac,BPSK,QPSK,16-QAM,64QAM,256-QAM Virtual AP (BSSID) 32 Number of spatial streams ICX400GAP - 2 ICX420GAP - 3 Transmit Power: The maximum transmit power output on each antenna port is 20 dBm for all rate levels and modulation modes. Power adjustment granularity: 1 dBm Working temperature –0°C to + 50°C 32°F to + 122°F Storage temperature –40°C to + 70°C -40°F to + 158°F Working/Storage humidity 5% to 95% (non-condensing) 5% to 95% (non-condensing) NEMA Enclosure IP31 Wireless features: Dynamic channel adjustment (DCA) Transmit power control (TPC) Blind area detection and repair Hidden SSID RTS/CTS RF environment scanning Dynamically shift users for best performance Link integrity maintenance Monitor and transition low performance devices to higher signal performance areas Forced roaming of terminals with weak signals High-density application optimization 802.11N: 40 MHz bundling 300 Mbps (PHY) Frame aggregation (A-MPDU) Maximum likelihood demodulation (MLD) Transmit beam forming (TxBF) Maximum ratio combining (MRC) Space-time block coding (STBC) Low-density parity-check code (LDPC) Forwarding security User isolation Periodic SSID enabling and disabling Access control of free resources Secure admission control of wireless terminals Wireless SAVI ACL Secure access control of APs Forwarding: IP address setting IPv6 forwarding IPv6 portal Local forwarding Multicast Roaming AP switching reference WDS Quality-of-Service: WMM Priority mapping QoS policy mapping L2-L4 packet filtering and flow classification Load balancing Bandwidth limit Call admission control (CAC) Power saving mode Intelligent identification of terminals Wireless network VAS Multicast enhancement Management: Network management Maintenance mode Log function Alarm Fault detection Remote probe analysis Dual-image (dual-OS) backup mechanism Watchdog Security: Encryption 802.11i WAPI MAC address authentication LDAP authentication PEAP authentication WIDS/WIPS Real-time spectrum protection Protection against DoS attacks ICX400GAP: 802.11ac dual radio, 2x2 Gigabit Performance Access Point ICX420GAP: 802.11nac dual radio 3x3 Gigabit Performance Access Point Contact: Phone: 844.242.9246 Email: [email protected] Web: www.intcomcorp.com © 2014 International Communications Corporation, Inc. All Rights Reserved. Printed in USA. icXchange ® is the Trademark of International Communications Corporation, Inc.