Transcript
LAN Test Solutions Copper Cabling
End Customers
Domestic Installers
Network Installers
Network Technicians
Maintenance & Repair
Tel: +44 (0)1925 44 44 46 Email:
[email protected] Website: www.europe.idealindustries.de
Amplifier Probe & Tone Generator Device interfaces with RJ11/RJ12, RJ45 and coaxial cabling Tone Generator Amplifier Probe Detects short circuits Adjusts tone and volume
wiring integrity and checks for proper Integrated RJ11/RJ12, RJ45 and coaxial cabling interfaces Detects cabling faults Device acts as a tone generator Convenient internal storage for remote
Re f.
Re f.
33-864 62-164 62-160
33-856
Kit : 62-160 tone generator and 62-164 amplifier probe Amplifier probe Tone generator
SecuriTEST™ PRO of analogue video surveillance systems. Colour LCD Screen PTZ Camera controller
33-859
VDV PRO - IENet™ PRO Instantly verifies wiring integrity and checks of networks. VDV PRO supports RJ-11/12, RJ-45, Coax F, BNC and RCA connectors IENet™ PRO supports RJ-45 and Detects and pinpoints cabling faults
PTZ Protocol Analyser Camera Programmer
Tone Generator on cables Checks the full length of a cable Dockable Remote
Ref. 33-892
Ref. SecuriTEST™ PRO - Tester for CCTV systems, analogue
33-770
VDV PRO w/one remote and terminator
33-772
IENet™ PRO w/single remote
33-780
VFF5 Visual Fault Finder
FiberMASTER™
.
of red light laser.
Pinpoints breaks and crimps through light loss across the sheath
1550nm and at 1490nm for FTTH cabling
Quick on-site checks of pre-built fibre cable connector switches
Power meter with removable universal
over a 5km (3 miles) length
Unique "docking" of light source within the power meter
Non-Roll Design Rugged metal housing protected by Santoprene® (rubber) over-sleeve
Ref. 33-927 Ref. VFF5 33-963-10 33-963-11
33-928 - VISUAL FAULT LOCATOR (SC, ST, FC)
33-929
+ FTTx 1490nm mode/FTTx (850/1310/1490/1550nm) power meter light source.
33-931
(LC, MU)
SignalTEK™ / SignalTEK™ FO
OTDR
SignalTEK™ and SignalTEK™ FO devices test and document the network performance of Gigabit
(Voice, Data, Video) against IEEE 802.3ab\ Gigabit Ethernet standard. colour screen
Ethernet services Detects cable faults Detects length of cable and delay by pair (2 pair or 4 pair)
fibre connectors PING test on IP or URL address
Ref.
Re f. 33-960-3 33-960-3MB 33-960-2
1310/1550nm for Singlemode Fibre Quad Micro OTDR with Macro Bend and PASS/FAIL Firmware
33-975
SIGNALTEK™ Copper Performance Tester
33-984
SIGNALTEK™-FO W/ 2 850nm MODULES
33-985
SIGNALTEK™-FO W/ 2 13X0nm MODULES
33-986
SIGNALTEK™-FO W/ 2 850nm & 2 13X0nm MODULES
33-988
SIGNALTEK™-FO (FIBRE READY-NO MODULES)
LanXPLORER Netmap, Netverify, In-line, Colour screen (touchscreen on PRO version)
Performs comparisons between two network diagrams Detailed analysis of network traffic Best-in-class Wiremapper - tests cables by pin as well as by pair Data exportable to PC via USB flash drive
Re f. 150001 150003 150005
Description 2 in LanXPLORER PRO – PREMIUM Package includes 1 xavec LanXPLORER PRO Test Unit & 1 x Remote Unit #1 * LanXPLORER – PREMIUM Package includes 1 x LanXPLORER Test Unit & 1 x Remote Unit #1 * LanXPLORER PLUS – PREMIUM Package includes 1 x LanXPLORER PLUS Test Unit & 1 x Remote Unit #1*
Kit Premium
LanTEK® II / FiberTEK® FDX carried out by the user. Channel and Permanent Link tests using the same universal measurement adaptor
Industrial M12 Ethernet adaptor , 10Gbits Alien Crosstalk 3 models : 350, 500 and 1000MHz Possibility of hardware upgrade via factory return (LanTEK II 350 → 500; LanTEK II 350 → 1000 ; LanTEK II 500 → 1000)
one single test
Ref.
Description
33-991 33-992 33-993 TRADE992 TRADE993 33-990-FA01 33-990-FA02 33-990-FA05 0012-00-0656
Category 6A High Performance RJ45 Universal Link Adaptors (2) - Lantek & LanTEK II IDEAL INDUSTRIES reserves the right to change product specifications without prior notice
