Preview only show first 10 pages with watermark. For full document please download

Idec Lumifabrochure2011

   EMBED

Share

Transcript

IDEC LUMIFA Family LED Lighting Solutions LUMIFA Lighting your way For over two decades, IDEC has produced LEDs for applications requiring indicator lights and signaling towers. Which is why it was a natural progression to begin developing lighting products and construct the world’s first building illuminated with 100% of our own LED technology. New LUMIFA LED lights provide a brighter, longer-lasting, cost-effective and more environmentally-friendly lighting source. • Bright: 65.3 Lumens/Watt (LUMIFA Series average) • Long Lasting: 70% of Initial Luminance at 50,000 Hrs • Efficient: 1/3 the energy of Fluorescent Tubes • Compact: Width as narrow as 27.5mm • Rugged: Heavy-duty, durable, water/oil resistant • Variety of Colors: Cool white, warm white, red, and yellow  800.262.4332 2 www.IDEC.com/usa/LED Suitable for Harsh Environments With their IP67/IP67f rating, the LF1D and 2D series can be used in wet and harsh environments. Resistant to water, oil and metal shavings, they are perfect for many industrial applications. In addition, the LF1E series can withstand temperatures down to -40ºC making them ideal for freezers and refrigerated environments. Heat Dissipation Technology 25 Times Longer Life 2.5 Times Longer Life Fluorescent Tube with Vibration 2,000 Hrs 0 Xenon 10,000 Hrs Fluorescent Tube 20,000 Hrs 10,000 20,000 In an LED, only 20% of the energy converts into Light, while 80% is lost in the form of heat. For that reason, proper heat management is critical. IDEC Heat Dissipation Technology (patent pending) uses dissipation pins to transfer heat generated in the LED chip to a heat dissipation plate. This minimizes the buildup of heat in the LED element and results in a longer-lasting LED. IDEC LUMIFA 50,000 Hrs Half Life 30,000 40,000 50,000 Hours CO2 25kg Environmentally-friendly LUMIFA LEDs are made from non-toxic materials and produce 71% less CO2 emissions compared with a 20W/25W fluorescent tube. LUMIFA are also great for green applications such as solar panels, which have a low power requirement and can’t supply the energy necessary for fluorescent bulbs. 22.5kg 20kg 18.0kg 15kg 10kg 5kg 0kg 6.48kg 25W Fluorescent tube 5.22kg 20W Fluorescent tube IDEC LF1A IDEC LF1B 3 LUMIFA LF1B Control Panels • Industrial Equipment LF1B Series LF1B miniature LED lights are enclosed in a thin light strip, and are available in four sizes with a choice of two covers (clear or white). • Brightness: 62.5 Lumens/Watt • Space saving: Width 27.5mm; Thickness 16mm • Four lengths to choose from • Long life: 70% of initial luminance at 40,000 Hrs • UL Listed • RoHS Compliant • Cable length: 10ft • IP54 • 12V DC models available (contact IDEC for details) C R US LED Optical Specifications Color Cool White Warm White Yellow Red Luminous Intensity (Single LED module) 5,000mcd 4,500mcd 2,300mcd 1,800mcd Color Temperature /Dominant Wavelength 5,500K 2,800K 590nm 625nm LED Array 3 x 1 90lx 60lx 20lx 20lx LED Array 6 x 1 170lx 110lx 40lx 40lx LED Array 12 x 1 330lx 200lx 75lx 75lx LED Array 24 x 1 560lx 350lx 125lx 125lx Reference Illuminance at 0.5m (clear cover) General Specifications Model LF1B-A (LED Array 3x1) LF1B-B (LED Array 6x1) Rated Voltage LF1B-D (LED Array 24x1) Input Current (at the rated voltage) 30mA 60mA 120mA 240mA Rated Power (at the rated voltage) 0.8W 1.5W 2.9W 5.8W Insulation Resistance 100 MΩ minimum (500V DC megger) Dielectric Strength 1,000V AC, 1 minute (between live and dead metal parts) Vibration Resistance Frequency: 5 to 55 Hz, Amplitude: 0.5mm Shock Resistance (damage limits) 1000m/s2 Operating Temperature –30 to +55°C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature –35 to +70°C (no freezing) Operating Atmosphere Life No corrosive gas 40,000 hours (The total illumination duration in which the luminance maintains a minimum of 70% of the initial value.) Degree of Protection IP54 End cover, conduit: polyamide Cover: polycarbonate Wire: US20276T AWG24 × 2C Material Weight (approx.) 4 LF1B-C (LED Array 12x1) 24V DC (non-polarized) 95g 125g 165g 255g www.IDEC.com/usa/LED Part Numbers Appearance Color Cool White Warm White Yellow Red LF1B-*3S-2THWW4 LF1B-*3S-2TLWW4 LF1B-*3S-2SHY6 LF1B-*3S-2SHR6 LF1B-*4S-2THWW4 LF1B-*4S-2TLWW4 LF1B-*4S-2SHY6 LF1B-*4S-2SHR6 Clear Cover White Cover Spectrum *LED Array A = 3x1 , B = 6x1, C = 12x1, D = 24x1 Illuminance Chart LF1B-D3S-2THWW4 (Cool White) Part Number Structure (use for interpreting part numbers only) 1000 L F 1 B – C 3 S – 2 THWW4 LED Module Arrangement A:  3 LEDs × 1 row Cover B:  6 LEDs × 1 row 3: Clear plastic C: 12 LEDs × 1 row 4: White plastic D: 24 LEDs × 1 row 10lx 50lx 500 LED Illumination Color THWW4: White TLWW4: Warm white SHY6: Yellow SHR6: Red 100lx 200lx 300lx 400lx 500lx 0 500 1000 1000 Dimensions (mm) Light Distribution at 0.5m LF1B-D3S-2THWW4 35 35 15 LED Module 600 500 27.5 4.2 7 (lx) A (B) 15 1000 (mm) 0 400 300 3000 Cover ±20 200 100 Conduit Dimension Table Part No. A B C LF1B-A 134   64 123 LF1B-B 210 140 199 LF1B-C 330 260 319 LF1B-D 580 510 569 ø3.5 16 2.5 End Cover C (7.4) 9 6 R2.1 0 -1000 -750 -500 -250 0 250 500 750 1000 (mm) Wire  800.262.4332 5 LUMIFA LF1D & LF2D Machine Tools • Food & Beverage Processing Equipment LF1D and LF2D Series (IP67, IP67f) LF1D and LF2D LED units are the brightest in their class. With their rugged construction they are ideal for machine tools, and food and beverage processing equipment. Offered in a wide or slim package, the design of these LED lights provides equally brilliant light at the center or edges of the units. • Brightness: Slim: 66.6 Lumens/Watt Wide: 67.2 Lumens/Watt • Life: 70% of initial luminance at 50,000 Hrs • Rugged & durable for harsh environments • IP67 (Polycarbonate lens) or IP67f (Reinforced glass lens) • Stainless steel cover, diecast aluminum housing • UL Listed (wet locations) C US • RoHS Compliant R LED Optical Specifications LF1D Model LF2D Slim Clear Illumination Surface Wide Diffused Clear Diffused Clear Wide Diffused Clear Diffused Cool White Illumination Color Total Luminous Flux Slim 600lm 840lm 600lm 840lm 5700K Color Temperature 1,100lx Reference Illuminance at 1.0m 1,000lx 1,100lx 1,000lx 1,100lx 1,000lx 1,100lx 1,000lx LED modules and illumination units may vary in color and brilliance. Luminous flux, color temperature, and illuminance values shown above are typical.  800.262.4332 General Specifications LF1D Model LF2D Slim Wide Rated Voltage 24V DC Voltage Range 21.6 to 26.4V DC Rated Power (typ.) 9W 12.5W Insulation Resistance 9W 12.5W 1,000V AC, 50/60Hz, 1 minute Vibration Resistance (damage limits) Frequency 5 to 55Hz, amplitude 0.5mm Shock Resistance (damage limits) 1000m/s2 Operating Temperature –30 to +55°C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature –35 to +70°C (no freezing) Operating Environment Life (Note 1) Wide 1MΩ minimum (500V DC megger) Dielectric Strength No corrosive gases 50,000 hours (The illumination duration in which the illuminance maintains a minimum of 70% of the initial value at 25ºC.) Degree of Protection (Note 2) 6 Slim IP67f (reinforced glass), IP67 (polycarbonate) Material (Note 3) Housing: Diecast aluminum Front cover: Stainless steel Lens: Reinforced glass or polycarbonate Housing & Flange: Diecast aluminum Lens: Reinforced glass or polycarbonate Weight (approx.) LF1D-E**-2W*: 750g LF1D-E**-2W-A*: 950g LF2D-E**-2W*: 850g LF2D-E**-2W-A*: 1000g LF1D-F**-2W*: 800g LF1D-F**-2W-*: 1000g LF2D-F**-2W*: 900g LF2D-F**-2W-A*: 1050g Note 1: LED life depends on the operating environment. Note 2: Waterproof or oil-proof characteristics specified by IEC 60529 and JEM1030. For illumination units without accessories, use a cable gland and cables that satisfy IP67f or IP67 degree of protection. Note 3: The reinforced glass and polycarbonate illumination surfaces have the same appearance, but have different degrees of protection (IP67f or IP67). www.IDEC.com/usa/LED Part Numbers Model Cable Gland Cable Slim Model LF1D-E (10 LEDs × 1 row) Mounting Bracket Wide Model LF1D-F (7 LEDs × 2 rows) Clear Reinforced Glass Clear Polycarbonate Clear Reinforced Glass Clear Polycarbonate Appearance Without (Cable gland hole on the side) — — √ LF*D-E2F-2W LF1D-E2F-2W-101 LF*D-E3G-2W LF1D-E3G-2W-101 LF*D-F2F-2W LF1D-F2F-2W-101 LF*D-F3G-2W LF1D-F3G-2W-101 Without (Cable gland hole on the back) — — √ LF*D-E2F-2W-200 LF1D-E2F-2W-201 LF*D-E3G-2W-200 LF1D-E3G-2W-201 LF*D-F2F-2W-200 LF1D-F2F-2W-201 LF*D-F3G-2W-200 LF1D-F3G-2W-201 — — √ LF*D-E2F-2W-300 LF1D-E2F-2W-301 LF*D-E3G-2W-300 LF1D-E3G-2W-301 LF*D-F2F-2W-300 LF1D-F2F-2W-301 LF*D-F3G-2W-300 LF1D-F3G-2W-301 √ — √ LF1D-E2F-2W-350 LF*D-E2F-2W-A LF1D-E3G-2W-350 LF*D-E3G-2W-A LF1D-F2F-2W-350 LF*D-F2F-2W-A LF1D-F3G-2W-350 LF*D-F3G-2W-A — — √ LF*D-E2F-2W-400 LF1D-E2F-2W-401 LF*D-E3G-2W-400 LF1D-E3G-2W-401 LF*D-F2F-2W-400 LF1D-F2F-2W-401 LF*D-F3G-2W-400 LF1D-F3G-2W-401 √ — √ LF*D-E2F-2W-450 LF1D-E2F-2W-451 LF*D-E3G-2W-450 LF1D-E3G-2W-451 LF*D-F2F-2W-450 LF1D-F2F-2W-451 LF*D-F3G-2W-450 LF1D-F3G-2W-451 With (Side) With (Back) *Insert 1 for surface mount models and 2 for recessed models. Part Number Structure (use for interpreting part numbers only) L F 2 D – E 2 F – 2 W – 3 0 0 Cable Gland Shape 1: Surface mount 2: Recessed mount Cable Cable Gland Gland Hole Location Blank – side A √ side 101 – side 200 – back 201 – back 300 √ side 301 √ side 350 √ side 400 √ back 401 √ back 450 √ back 451 √ back Code Size (LED arrangement) E: Slim Model (10 LEDs × 1 row) F: Wide Model (7 LEDs × 2 rows) Illumination Surface 2: Clear, Reinforced glass 3: Clear, Polycarbonate 5: Diffused, Polycarbonate 9: Diffused, Reinforced glass Degree of Protection F: IP67f G: IP67 Cable – √ – – – – – √ – – – √ Mounting Bracket – √* √* – √* – √* – – √* – √* * Mounting bracket available for LF1D series only. Brightest in its class The optical design ensures extreme brightness. Achieves illuminance specified by EN1837: 1999, 4.2. Cover Stainless steel. The cover is extremely durable, perfect for harsh environments. Glare prevention Diffused model available to prevent glaring light and reflection. (EN1837: 1999, 4.3.) Housing Aluminum. Heat dissipation Heat is dissipated by the aluminum housing. Efficient power circuit Highly efficient, low-heat power circuit. 7 LUMIFA LF1D & LF2D Machine Tools • Food & Beverage Processing Equipment Distribution Characteristics (reference value at 1.0m) (lx) 1100 Slim and Wide Models (Clear Surface) 800 800 400 400 –400 0 (lx) 1100 Clear –400 Slim (Illuminates area directly below) Clear and Diffused Surface (Wide) Clear 800 400 Diffused 0 –800 400 (mm) Wide (Illuminates wide-ranging area) Clear and Diffused Surface (Slim) (lx) 1100 0 400 Diffused 0 –800 800 (mm) –400 0 400 800 (mm) Illuminance Charts Slim Models Y (mm) Clear surface 200 400 200 600 800 1000 0 400 800 0 -200 -200 -400 -200 0 200 X (mm) 400 600 200 -200 0 200 X (mm) 400 600 800 800 1000 0 -400 -400 -200 0 X (mm) 200 -400 400 -200 0 200 X (mm) Connection Example Removable direct plug-in terminal blocks, with spring clamp connections, ensure a high-quality connection. This provides for easy installation or replacement of the LED illumination unit. LF1D Side Cover Cable Terminal Block LF2D Side Cover Cable 8 X: long side Y: short side 0 -200 -400 -400 Easy Maintenance Spring-clamp Terminal Blocks 400 -200 -400 -400 200 400 400 200 600 Diffused surface 200 400 Y (mm) 400 200 Y (mm) Diffused surface 200 Y (mm) Clear surface 400 Wide Models 400 www.IDEC.com/usa/LED Dimensions (mm) LF2D Slim LF1D Slim 2.0 257 R2 310 37.5 2.0 (159) 305 Panel thickness: 5 max. ø5.0 4-M4 Effective thread: 10mm Brown: (+) Blue: (–) Pink: Side Cover (146) 6-M5×10 Hexagon Socket Flat Head Screw + Gasket (supplied with LF2D) Axis Center 28.7 Cable length: 5m 5 max. Front Cover Cable Gland ø5.0 49.8 32 25 Illumination Surface 29.8 1.5 Axis Center Housing P0.7 40 * External diameter of cable gland is ø20mm Cable length: 5m 374 366+0.2 0 ±0.2 4-M5 Screws 65±.2 55+0.2 0 25.0 ±0.2 Brown: (+) Blue: (–) Pink: Waterproof Gasket (supplied with LF2D) • Mounting Hole Layout • Mounting Hole Layout Illumination Surface 4-M5 P0.8 Effective thread: 10mm (120) 227 Housing (107) Front Cover Cable length: 5m Brown: (+) Blue: (–) Pink: Side Cover 60 14.8 6-M5×10 Hexagon Socket Flat Head Screw + Gasket (supplied with LF2D) Axis Center Cable Gland * External diameter of cable gland is ø20mm • Mounting Hole Layout • Mounting Hole Layout 6-M5 Screws ø5.0 Axis Center 25.9 1.5 Mounting Bracket 308 293 105 90 55 305 ±0.2 4-M4 P0.7 Effective thread: 10 mm 24.8 5 max. M8 P1.0 Effective thread: 5 mm 217 35 Panel thickness: 5 max. 74.7 58.6 ±0.2 4040 4 215 ø4 8 .2 12.0 40±0.2 .2 -ø4 ø5.0 2.0 R2 .6 LF2D Wide 374.0 ±2.0 310 292 Without cable 270 gland, mounting bracket, and cable 183.6 2.0 27 40 LF1D Wide 40 15.7 15 30 Mounting Bracket 8 389 374 80 65 30.6 .6 390 374 350 Brown: (+) Blue: (–) Pink: Cable length: 5m Waterproof Gasket (supplied with LF2D) 293 ±0.2 286 +0.2 0 4-M5 P0.8 Effective thread: 10 mm  800.262.4332 12 8 M8 P1.0 Effective thread: 5 mm 60 ±0.2 60 Without cable gland, mounting bracket, and cable 4-ø 2- ø5 .2 60 ±0.2 5.2 8 60 292 ±2.0 6-M5 Screws 90 ±0.2 +0.2 80 0 40 ±0.2 4-M5 Screws 227 ±0.2 9 LUMIFA LF1E Freezers • Refrigerated Display Cases • Testing Chambers LF1E Series The LF1E illumination lights are designed to be used in freezers or refrigerated display cases where the ambient temperature is as low as -40ºC. These energy saving units, with a long service life, compact size and low heat generation make them perfect for illuminating areas with very low temperatures. • Three types of light distribution: no-lens, condensing and dual • Life: 70% of initial luminance at 40,000 Hrs • Available in 4 lengths • Plastic lens suitable for food industry • IP54 protection against dust and water • CE marked, UL Listed (damp locations) C US R LED Optical Specifications Illumination Color Cool White Warm White Color Temperature 5000K 3000K Lens Type No Lens (Note 1) Condensing Lens (Note 2) Dual Lens Unit Length  Reference Illumination 550mm 950lx 750lx 808mm 1,100lx 900lx 1066mm 1,200lx 950lx 1450mm 1,250lx 1,000lx 550mm 1,950lx 1,500lx 808mm 2,000lx 1,550lx 1066mm 2,000lx 1,550lx 1450mm 2,000lx 1,550lx 800.262.4332 See Illumination Distrbution Chart next page Note 1: LED life depends on the operating environment. Note 2: Measured at 0.3m directly below unit. General Specifications Model (length) LF1E-B (550mm) LF1E-C (808mm) Rated Voltage LF1E-E (1450mm) 24V DC Input Current (at rated voltage) 24V DC 350mA (404mA max) 525mA (606mA max) 700mA (807mA max) 950mA (1004mA max) Power Consumption (typ. at rated input) 24V DC 8.4W (9.7W max) 12.6W (14.6W max) 16.8W (19.4W max) 22.8W (26.3W max) Insulation Resistance 100 MΩ minimum (500V DC megger) between input and housing Dielectric Strength 500V AC, 1 minute Vibration Resistance (damage limits) Frequency 5 to 55Hz, amplitude 0.17mm Shock Resistance (damage limits) 300m/s2 Operating Temperature –40 to +40°C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature –40 to +70°C (no freezing) Operating Environment No corrosive gases 40,000 hours (The illumination duration in which the illuminance maintains a minimum of 70% of the initial value at 25ºC.) Life Weight (approx.) (Note 1) Degree of protection Material Note 1: Dual lens type. 10 LF1E-D (1066mm) 275g 390g 515g 690g IP54 End cover, conduit: polyamide, Cover: polycarbonate, Cable: PVC, Mounting bracket: stainless steel www.IDEC.com/usa/LED Part Numbers LF1E-B3S-2*† (550mm) LF1E-C3S-2*† (808mm) LF1E-D3S-2*† (1066mm) cool white shown cool white shown warm white shown LF1E-E3S-2*† (1450mm) cool white shown * N = Cool white, L: Warm white. † Blank = No lens, A = Condensing Lens, B = Dual Lens. Dimensions (mm) Part Number Structure (use for interpreting part numbers only) Conduit Cable Brown: L (+) L F 1 E – B 3 S – 2 N A Ｌ ø5.9 36 Length (mm) B: 550 Light Distribution (Lens type) C: 808 Blank: No Lens LED Color D: 1,066 A: Condensing Lens N: Cool white (5,000K equivalent) E: 1,450 B: Dual Lens L: Warm white (3,000K equivalent) End Cover Cover Cable length: 300 Blue: N (–) 18.8 Partially-stripped (×2) 18 AWG Dimension Table LF1E-B3 L A B C D Mounting Bracket Qty 550 585 30 490 490 2 LF1E-C3 808 843 29 750 375 3 LF1E-D3 1,066 1,101 30.5 1,005 335 4 LF1E-E3 1,450 1,485 32 1,386 462 4 Illuminance Distribution Charts No-lens B Condensing Lens 0 20 40 60 80 100 (%) 90° 90° 45° Dual Lens 0 20 40 60 80 100 (%) 90° 90° （35） ƒ 45° 45° ƒ 0° Y (short side) image Y (short side) image No-lens (LF1E-E3S-2N) Condensing Lens (LF1E-E3S-2NA) -500 Anti-rotation Hole (Use one) ƒ ƒ Y (short side) image 6 ø2 .1 M4 × P0.7 tapped hole or ø4.2 hole -500 -400 -300 600 -100 0 1400 100 1000 1200 400 -400 200 -300 -200 800 Y (mm) -200 Y (mm) X: long side Y: short side 6 Illuminance Charts 300 -200 0 200 X (mm) 400 600 800 1000 1200 1600 2000 100 300 -400 800 0 200 -600 400 -100 200 400 500 -1000 -800     L   ƒ Minimum Radius 24 mm 45° 0° M4 screw Mounting Bracket (supplied) (supplied) Recommended mounting centers (D) C A 20 max. 40 max. Part No. 400 500 -1000 -800 -600 -400 -200 0 200 X (mm) 400 600 800 1000 Dual Lens (LF1E-E3S-2NB) -500 -400 -300 Y (mm) -200 -100 250 500 1000 1500 1250 750 0 100 200 300 400 500 -750-650-550-450-350-250 -150 -50 50 150 250 350 450 550 650 750 X (mm) 11 LUMIFA LF1A Control Panels • Manufacturing Equipment LF1A Series LF1A LED strips use super-bright multi-chip LEDs providing illumination equivalent to a 25W fluorescent lamp, while consuming only one-third the power. They come in a thin housing available in three sizes with four color configurations: cool white (5500K), warm white (2800K), yellow (590nm) and red (625nm). • Brightness: 66.6 Lumens/Watt • Energy saving: One-third of fluorescent lamps • Long life: 40,000 Hrs (Half-life) • UL Listed • RoHS Compliant • IP40 C R US LED Optical Specifications Model LF1A-*-2THWW6 LF1A-*-2TLWW6 LF1A-*-2SHY8 LF1A-*-2SHR8 Illumination Color Cool White Warm White Yellow Red 6,000mcd 4,000mcd 4,000mcd 2,500mcd 5,500K 2,800K 590nm 625nm LED Array 3 x 2 190lx 130lx 130lx 85lx LED Array 6 x 2 380lx 260lx 260lx 170lx LED Array 12 x 2 760lx 520lx 520lx 340lx LF1A-*-2THWW6 LF1A-*-2TLWW6 LF1A-*-2SHY8 LF1A-*-2SHR8 Luminous Intensity (Single LED module) Color Temperature / Dominant Wavelength Reference Illuminance at 0.5m *LED Array A1 = 3x2 , B1 = 6x2, D1 = 12x2 General Specifications Model Rated Voltage Input Current (at rated voltage) Rated Power (at rated voltage) 24V DC (non-polarized) LED Array 3 x 2 75mA 90mA LED Array 6 x 2 150mA 180mA LED Array 12 x 2 300mA 360mA LED Array 3 x 2 1.8W 2.2W LED Array 6 x 2 3.6W 4.4W LED Array 12 x 2 7.2W 8.7W Dielectric Strength Between live and dead parts: 100 MΩ (500V DC megger) Operating Temperature -20 to +50˚C Storage Temperature Operating/Storage Humidity Life (half luminance) Weight (approx.) Degree of Protection *LED Array A1 = 3x2 , B1 = 6x2, D1 = 12x2 12 Between live and dead parts: 1000V AC, 1 minute Insulation Resistance -25 to +70˚C 45 to 85% RH (no condensation) 40,000 hours LF1A-A1: 190g, LF1A-B1: 270g, LF1A-D1: 470g IP40 www.IDEC.com/usa/LED Part Numbers Color Cool White Warm White Yellow Red Part No. LF1A-*-2THWW6 LF1A-*-2TLWW6 LF1A-*-2SHY8 LF1A-*-2SHR8 Appearance Light Spectrum *LED Array A1 = 3x2 , B1 = 6x2, D1 = 12x2 Part Number Structure (use for interpreting part numbers only) Dimensions (mm) L F 1 A – A1 – 2 THWW6 4.5 25 R2.25 ø5 5 3 10 4.5 LED Module Arrangement A1: 3 LEDs × 2 rows B1: 6 LEDs × 2 rows D1: 12 LEDs × 2 rows 10 55 LED Illumination Color THWW6: Cool White TLWW6: Warm white SHY8: Yellow SHR8: Red A Light Distribution at 0.5m LF1A-D1-THWW6 (Cool White) C 14 B (lx) 500 +20 22 750 700 Dimension Table 300 100 0 -750 -500 -250 0 250 500 750 (mm) Part No. A B C LF1A-A1- 120 92 108 LF1A-B1- 180 152 168 LF1A-D1- 300 272 288 11 1 500 Illuminance Chart LF1A-D1-2THWW6 1000 5lx 5lx 10lx 20lx 50lx 100lx 200lx 300lx 400lx 500lx 500 0 500 10lx 5lx 1000 5lx 500 0 500 1000 (mm)  800.262.4332 13 LUMIFA LF1F Visual Inspection Lighting • Elevator Ceiling Lighting LF1F Series Unlike fluorescent lights, LED lights do not flicker and therefore illuminate objects evenly. Uneven surfaces, such as scratches and flaws, are more visible providing more accurate inspections. The LF1F provides steady light regardless of ambient temperature and the narrow profile saves space allowing mounting flexibility. • Energy saving • Long operating life • Maintenance free • 12mm-thin bezel saves space • 300mm square illuminated surface • Wider operating temperature range than fluorescent lighting Applications LED Optical Specifications Model LF1F Ideal for visual inspection, as the LF1F makes it easy to see even the slightest surface flaws. 8,500K Color Temperature 5,800lx minimum (panel center) Reference Illuminance at 1.0m Operating Specifications LF1F Operating Voltage Range 21.6 ~ 26.4V DC Wattage (typ.) 11W Insulation Resistance 100MΩ minimum Dielectric Strength 1,000V, 50/60Hz, 1 minute Vibration Resistance 5 ~ 55Hz, amplitude 0.5mm, 60m/s2 (3 directions, 2 hours each) Shock Resistance 1,000m/s2 Operating Temperature -10° ~ 60 (no freezing) Operating Humidity 45 ~ 85% RH (no condensation) Storage Temperature -20° ~ 70ºC (no freezing) Operating Environment No corrosive gases, no harmful dust Life 40,000 hours Degree of Protection IP20 (IEC60529) Materials Housing: Aluminum Light emitting part: acrylic; Cover: acrylic Weight (approx.) 1.1kg Application examples for product inspections • Detect uneven plastic and rubber part surfaces • Detect dust on glass or plastic plates • Illuminate marks on metal surfaces during cutting and marking • Detect flaws on painted or plated surfaces • Detect scratches and unevenness on embossed materials • Detect scratches and foreign materials on silicon wafers • Elevator illumination Dimensions (mm) 331 315 12 295 1000mm or 3000mm Model Part Numbers Cable Length LF1F-B4-2D1 1m LF1F-B4-2D3 3m 300mm square 8,500K .0 0/ 6 800.262.4332 Color Temperature （21） 4-  Size 245 Model 295 Appearance Light emitting plane （Light emitting plane: 271 x 271） 14 Housing www.IDEC.com/usa/LED Choose Your LUMIFA Comparison Chart Color IP Rating Lens/Cover Mounting Series IP40 Clear Standard LF1A Standard LF1B Standard LF1E Standard LF1B Standard LF1D Flush LF2D Standard LF1D Flush LF2D Standard LF1D Flush LF2D Standard LF1D Flush LF2D Standard LF1B Standard LF1E Standard LF1B Standard LF1A Standard LF1B Clear Standard LF1B White Standard LF1B Clear Standard LF1A Clear Standard LF1B White Standard LF1B Clear Standard LF1A IP54 Clear White Cool white (Color Temp Range: 5000K - 5700K) Clear and Polycarbonate IP67 Diffused & Polycarbonate Clear & Reinforced Glass IP67f Warm white (Color Temp: 2800K-3000K) IP54 Diffused & Reinforced Glass Clear White IP40 Yellow (Dominant Wavelength: 590nm) IP54 Red (Dominant Wavelength: 625nm) IP54 IP40 IP40 Clear 15 Accessories Part No. Mounting Bracket LF9Z-1MB1 Mounting Bracket Mounting Bracket Mounting Bracket LF9Z-1MA1 LF9Z-B12 LF9Z-B11 Applicable Unit LF1B-A, -B and -C LF1A-A, -B and -D LF1D (Wide) (-D not applicable) Material LF1D (Slim) Mounting Bracket LF9Z-1SE1 Cable Gland LF9Z-A11 Cable LF9Z-C05 LF1E LF1D LF1D Brass PVC Stainless Steel 1 pair Left and Right Notes 1 piece M8, applicable wire Length: 5m size (10-12 AWG) PS5R Slim Line Power Supplies • Lightweight and compact in size • Wide power range: 10W-240W • Universal input: 10W to 90W: 85-264V AC/100-370V DC 120W and 240W: 85-264V AC/100-350V DC • Power Factor Correction for 60W to 240W (EN61000-3-2) • Meets SEMI F47 Sag Immunity (120W & 240W only) • UL Listed for Class 1, Div. 2 Hazardous Locations Support Information IDEC LED Illumination www.IDEC.com/usa/LED Technical support: [email protected] 800-262-IDEC www.IDEC.com/usa Need a reliable, lightweight power supply? PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you’ve come to expect from IDEC.  800.262.4332 Think Automation and beyond... www.IDEC.com USA Japan Germany China/Beijing China/Shenzhen IDEC Corporation Tel: (408) 747-0550 [email protected] IDEC Corporation Tel: +81-6-6398-2571 [email protected] IDEC Elektrotechnik GmbH Tel: +49-40-253054-0 [email protected] IDEC (Beijing) Corporation Tel: +86-10-6581-6131 [email protected] IDEC (Shenzhen) Corporation Tel: +86-755-8356-2977 Canada United Kingdom Hong Kong China/Shanghai IDEC Canada Ltd. Tel: (905) 890-8561 [email protected] IDEC Electronics Ltd. Tel: +44-1256-321000 [email protected] IDEC (H.K.) Co., Ltd. Tel: +852-2803-8989 [email protected] IDEC (Shanghai) Corporation Tel: +86-21-5353-1000 [email protected] IDEC Asia Pte. Ltd. Tel: +65-6746-1155 [email protected] Australia IDEC Australia Pty. Ltd. Tel: +61-3-8523-5900 [email protected] ©2011 IDEC Corporation. All Rights Reserved. Catalog No. LF9Y-B100-2 5/11 7.5K Specifications and other descriptions in this catalog are subject to change without notice. Singapore Taiwan IDEC Taiwan Corporation Tel: +886-2-2698-3929 [email protected]