Transcript
IDI-WB02 DP1952/Rev03 - DI
Universal Speaker Wall Mount
Contents: X1
X1
Weight: 0.5 kg / 1.1 lb
www.nexo-sa.com ZA du pre de la Dame Jeanne 60128 PLAILLY-France
- Read t his docum ent before using. - Keep t his docum ent . - Observe all warnings and caut ions.
PAGE 1 OF 3
Dimensions:
Safety Notes: -
Max load capacity: 15kg / 33lb. For use only by trained installers. For use only at proper walls with adequate anchors. Inspect bolted assemblies periodically. For indoor use only.
Assembly: Separate speaker holder from wall plate.
Screw the wall plate with the decorative plate to the wall. Use two or three screws (not supplied).
Screw speaker plate to Nexo Speaker (use screws provided with Nexo Speaker – 10mm wrench).
Place the speaker holder with Nexo Speaker into the wall bracket. Fix by tightening bolted assembly.
Use a 5mm ALLEN wrench for holding the tilt positions.
www.nexo-sa.com ZA du pre de la Dame Jeanne 60128 PLAILLY-France
- Read t his docum ent before using. - Keep t his docum ent . - Observe all warnings and caut ions.
PAGE 2 OF 3
Use :
Pos A
Tilt: -80° to 0°
Pos B
Tilt: -80° to +30°
Pos C
Tilt:
-20° to +60°
-60° to +20°
NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
Please check the web site www.nexo-sa.com for the latest update.
www.nexo-sa.com ZA du pre de la Dame Jeanne 60128 PLAILLY-France
- Read t his docum ent before using. - Keep t his docum ent . - Observe all warnings and caut ions.
PAGE 3 OF 3
