Transcript
Interactive Digital Displays
i DISPLAY Retail Tablet Adjustable Shelf Clip Product Specification & Assembly Instructions
Interactive Digital Displays
i Display’s range of fixtures are the perfect retail accessory for your i Display Retail Tablet and Android Advertising Display. The Shelf clip gives you a complete solution to secure your display to any shelf location within the store. The i Display Retail tablet Shelf clip is made from high-quality materials and is very simple to assemble.
For further information or support, please contact
[email protected]
Interactive Digital Displays
Product Specification L X W X H mm
H
L
W
For further information or support, please contact
[email protected]
Interactive Digital Displays
7” highest hole horizontal position 190 X 300 X 162
7” highest hole vertical position 122 X 300 X 196
7” lowest hole horizontal position 190 X 300 X 147
7” lowest hole vertical position 122 X 300 X 190
For further information or support, please contact
[email protected]
Interactive Digital Displays
10.2” highest hole horizontal position 270 X 296 X 186
10.2” lowest hole horizontal position 270 X 296 X 180
10.2” highest hole vertical position 180 X 296 X 270
10.2” lowest hole vertical position 180 X 296 X 270
For further information or support, please contact
[email protected]
Interactive Digital Displays
Angle rotation range.
highest position
lowest position
Shelf Clip general dimensions.
114.4
244.2
118
104
For further information or support, please contact
[email protected]
Interactive Digital Displays
Components
Shelf clip
Screw (6pc)
Screw driver
Thumb screw (4pc)
For further information or support, please contact
[email protected]
Interactive Digital Displays
Assembly Instructions Step 1 Choose the desired adjustable hole, then connect the Front panel to the base of Shelf Mount using the position screw.
Front panel Angle screw
Base of Shelf mount
Position screw
4 Adjustable holes, to adjust the height of the Retail Tablet.
For further information or support, please contact
[email protected]
Interactive Digital Displays
Step 2 Peel off the protective paper on the 3M stickers, then stick the Shelf mount on the surface of shelf where you want the Retail Tablet placed.
Peel off the protective paper on the 3M sticker
For further information or support, please contact
[email protected]
Interactive Digital Displays
Step 3 If you desire to affix the larger sized Retail Tablet (over 15.6”), we suggest you affix the Shelf mount with screws as described in the picture below, this will increase the stability of the unit.
For further information or support, please contact
[email protected]
Interactive Digital Displays
Step 4 Connect the Retail Tablet with the Shelf mount by using the 4pcs of the thumb screws.
For further information or support, please contact
[email protected]
Interactive Digital Displays
Step 5 Plug in the DC cord to the Retail Tablet. Pass the wire through the wire hole.
Wire hole
For further information or support, please contact
[email protected]
Interactive Digital Displays
Step 6 You can adjust and set the angle of the Retail Tablet by adjusting the angle screw as below.
2 holes for the angle screw location
Adjust the angel screw to set the Tablet angle
For further information or support, please contact
[email protected]
