Ids-66 Amphe-10g - Amphenol Industrial

Transcript

Amphenol ® IDS-66-1 Amphe-10G Amphenol Industrial Products Group (AIPG) offers many products and solutions for high speed applications. Our new Amphe-10G follows in this tradition with speeds of up to 10Gbps. Using an oval contact system housed in a 38999 shell, end users can achieve the highest data speeds. Available in three shell styles (straight plug, wall mount or jam nut receptacle) and nine insert arrangements from shell sizes 9 through 25 and up to 21 circuits. The Amphe-10G can be integrated with many electrical protocols including but not limited to: 10G Base T, HDMI, Fiberchannel (AI), 40G Base-T, SATA 2.0, 3.0, Serial RapidIO, and PCI Express 3.0. Engineered to Amphenol’s high standards for ruggedness, reliability and speed, there is no slowing down the Amphe-10G. Features: • High Density: contains (4) 100 Ohm differential pairs capable of delivering data transfer of speeds of 10Gbps per pair • Sizes 9 through 25 MIL-DTL-38999 connector shells • Front release rear removable contact system for easy repair • Metal or Composite Shell material • Solder or PCB tail contacts available • Meets environmental requirements of MIL-DTL-38999 • Uses off-the-shelf Mil Spec backshells www.amphenol-industrial.com The Amphe-10G is the newest high speed interconnect product offering by AIPG that provides many advantages for high speed data transmission. Technical Data Data Rate 10Gbps per pair Insertion Loss <0.3 dB up to 5 GHz Return Loss >20 dB up to 5 GHz NEXT and FEXT >40 dB up to 5 GHz Differential to Common Mode Conversion >50 dB up to 5 GHz Mating Cycles 500 minimum Operating Temperature -65 C° to 175 C° Oval Contact System Contact materials and platings consistent with AS39029 How to order 1 10TVP 2 00 3 RZW 4 13-53 5 P 6 B 6 A(24) Connector Type Shell Style Service Class Shell Size - Insert Arrangement Contact Type Alternate Keying Position Cable Order Designator/ Cable Length in Inches See Table A See Table B See Table C See Table D 10TV Tri-Start Series Connector with metal shells 00 Wall Mount Receptacle 10TVP Back panel mounted receptacle with metal shells 06 Straight Plug 10CTV Tri-Start Series Connector with composite shells 07 Jam Nut Receptacle 10CTVP Back panel mounted receptacle with composite shells P Pin S Socket Table B (Shell Size - Insert Arrangement) Table A (Service Class) Threaded Shell Style Integral Shell Style* RZF RYF RGZF RGYF Electroless nickel plated ground plane RZW RYW Olive drab cadmium plate RGZW RGYW RZB RYB RGZB RGYB Description Insert Arrangment # of Contacts Electroless nickel plated 9-51 1 Olive drab cadmium plated ground plane NiAlBronze RZK RYK RGZK RGYK ZDT YDT GZDT GYDT NiAlBronze ground plane 11-52 2 13-53 4 15-54 6 Insert Arrangment # of Contacts Corrosion resistance stainless steel 17-65 8 19-86 10 Stainless steel ground plane Durmalon plated, Nickel-PTFE alternative to cadmium Groundplane Durmalon * Integral Shell Style - an integral backshell connector style that eliminates the need for costly backshell accessories, and allows the user to attach the shield of their cable directly to the connector. The integral shell style also provides superior EMI shielding and ease for overmold applications. 21-57 14 Table C (Alternate Keying Position) Locksmith keying-rotation of minor keys. See Series III Alternate Position below “N” not required for normal position. Tri-Start Alternate Positions A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. MAIN KEYWAY ˚ BR BSC RECEPTACLE (front face shown) Cable Order Designator Cable Part Number Pairs A Thermax MX 10G-24HP Four (4) Bonded Pairs B Thermax MX 10G-24 C Thermax MX 10G-24FLX ˚ MAIN KEYWAY ˚ ˚ CR BSC ˚ AP BSC 25-49 21 Table D (Cable Order Designator/Cable Length in Inches) AR BSC DR BSC 23-58 18 Conductor Insulation Extruded Fluoropolymer 24 AWG Four (4) Extruded 19 x 36 Twisted Pairs silver plated Fluoropolymer copper alloy Four (4) Fluoropolymer Twisted Pairs Temperature Impedance Range -65°C to 150°C -65°C to 150°C 100 Ohms ±15% -65°C to 200°C ˚ BP BSC PLUG (front face shown) Shell Size 13 Key & Keyway Arrangement Identification Letter N A B C D E ˚ CP BSC ˚ DP BSC AR° or AP° BSC BR° or BP° BSC CR° or CP° BSC DR° or DP° BSC 95 113 90 53 119 51 141 156 145 156 146 141 208 182 195 220 176 184 236 292 252 255 298 242 Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. For further information on your individual application requirements, contact: Amphenol Corporation North America: Amphenol Industrial Operations 180 N. Freeport Drive, Plant 4 Nogales, AZ 85621 Tel: (888) 364-9011 Fax: (520) 285-5134 Europe: Amphenol Industrial Operations Europe Via Barbaiana 5 1-20020 Lainate (MI) Italy Tel: +39 02 93254.204 Fax: +39 02 93254.444 Middle East: Amphenol Middle East Enterprises FZE Office C-37 PO Box 21107 Ajman Free Zone, UAE Tel: +9 716-7422494 Fax: +9 716-7422941 Email: [email protected] Email: [email protected] Email: [email protected] Asia: Amphenol Technology Shenzhen Ltd Block 5 Fuan 2nd Industrial Park Dayang Rd, Fuyong Baoan Baoan, Shenzhen, China 518103 Tel: +86 755 2881 8389 Fax: +86 755 2991 8310 Email: [email protected]