Transcript
SWISSBIT Memory Modules Memory
PATA/SATA INDUSTRIAL SOLID STATE DRIVES P-120
The P-120 series is designed for long-term inudstrial usage and supports key requirements such as long data retention, no compromise power fail safety and long product life cycles. This lines uses the most reliable SLC Flash in combination with rugged hardware designed and approved firmware technologies in order to provide the best performance in quality, reliability and data integrety. Up to medium density ranges and especially in harsh conditions, Swissbit's SSDs P-120 is the HDD of choice.
Features:
• 200-pin 64-bit Small Outline • Module organization: single rank 128M x 64
MOUSER STOCK NO.
Swissbit
This page of product is RoHS compliant.
922-603888 922-603889 922-603890 922-603891
• 1.8V I/O (SSTL_18 compatible) • VDD = 1.8V ±0.1 V, V DDQ 1.8V ±0.1 V
Swissbit Part No.
Memory Series Size
SFPA4096Q1BO2TO-I-DT-243-STD SFPA8192Q1BO2TO-I-QT-243-STD SFPA16GBQ1BO4TO-I-QT-243-STD SFPA32GBQ1BO8TO-I-QT-243-STD
P-120 P-120 P-120 P-120
4GB 8GB 16GB 32GB
• Auto Refresh (CBR) and Self Refresh 8k Refresh every 64ms • Serial Presence Detect with EEPROM
Interface
Red/Write (MB/s)
Supply Voltage
Active Mode
IED/ATA 133 IED/ATA 133 IED/ATA 133 IED/ATA 133
40/35 40/35 40/35 37/32
5 5 5 5
160 160 160 160
For quantities greater than listed, call for quote.
Operating Temperature (Cº) -40 to +85 -40 to +85 -40 to +85 -40 to +85
Connector 44-pin, 44-pin, 44-pin, 44-pin,
2 2 2 2
mm mm mm mm
pitch pitch pitch pitch
Price Each
1
89.38 154.62 269.55 461.10
25
79.58 140.00 246.04 428.59
X-200/500/55 The X-200/500/55 Series Solid State Drives (SSD) are drop-in replacements for traditional 2.5“ hard disk drives (HDD). The X-200 Series SSDs are offered in both, Parallel ATA (PATA) and Serial ATA (SATA) interfaces. This line is designed for industrial usage and does not support dedicated optimization techniques commonly used in ""Enterprise SSDs“. Critical factors like long data retention, no compromise power fail safety and long product lifecycles are key for industrial customers. The X-500 Series Industrial SATA II SSD 2.5” storage solutions are designed for demanding applications. The Swissbit X-55 SATA SSDs offer many similar features and industrial capabilities at a lower price point using EM-MLC Flash technology. The Solid State Drive is a rugged, high performance and extremely reliable storage solution. The data rate reaches up to 240MB/sec and an impressive 14,500 IOPS with 4 KB random accesses. The high end architecture utilizes up to 8 channels with the most reliable SLC NAND Flash (X-200/X-500) on the market.
X-200 Features:
• 100.2mm x 70.0mm x 9.0mm • Low Power CMOS technology, less than 500mA • S.M.A.R.T., HPA, Security and 48bit feature set • Number of connector insertions/removals: >1,000 • Max. PIO mode 4, MDMA2 supported
X-500 Features:
X-55 Features:
• 100mm x 70mm x 9.2mm • Mechanical robustness (MIL-STD810) • Low Power CMOS technology, less than 1W (idle) / 2.5W (operation) average current • Max. PIO mode 4, MDMA2 supported • TRIM and NCQ support
MOUSER STOCK NO.
Swissbit Part No.
Series
Memory Size
Interface
922-604435 922-604433 922-604431 922-604429 922-603777 922-603778 922-603779 922-604244 922-604246 922-604642 922-604641 922-604640 922-604639 922-604638 922-604531
SFSA030GQ1BJ2TO-I-LB-216-STD SFSA060GQ1BJ4TO-I-LB-216-STD SFSA120GQ1BJ8TO-I-LB-216-STD SFSA240GQ1BJ4TO-I-OC-216-STD SFSA4096Q1BR4TO-I-MS-226-STD SFSA8192Q1BR4TO-I-DT-226-STD SFSA16GBQ1BR8TO-I-DT-226-STD SFSA4096Q1BR4TO-I-MS-236-STD SFSA8192Q1BR4TO-I-DT-236-STD SFSA016GQ1BJ8TO-I-DT-226-STD SFSA032GQ1BJATO-I-DT-226-STD SFSA064GQ1BJATO-I-QT-226-STD SFSA128GQ1BJ8TO-I-NU-226-STD SFSA256GQ1BJATO-I-NU-226-STD SFSA512GQ1BJATO-I-NC-226-STD
X-55 X-55 X-55 X-55 X-200 X-200 X-200 X-200 X-200 X-500 X-500 X-500 X-500 X-500 X-500
30GB 60GB 120GB 240GB 4GB 8GB 16GB 4GB 8GB 16GB 32GB 64GB 128GB 256GB 512GB
SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA II - 3Gbit/s ATA8 SATA II - 3Gbit/s ATA8 SATA II - 3Gbit/s ATA8 SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA II - 3Gbit/s ATA8 SATA II - 3Gbit/s ATA8 SATA II - 3Gbit/s ATA8 SATA II - 3Gbit/s ATA8 SATA II - 3Gbit/s ATA8 SATA II - 3Gbit/s ATA8
Red/ Write (MB/s) 240/160 240/160 240/160 240/160 100/46 110/87 110/87 120/95 120/95 221/146 225/156 227/160 240/200 228/192 236/220
• 100mm x 70mm x 9.2mm • Max. UDMA6 supported • Max. PIO mode 4, MDMA2 supported • Endurance Managed NAND Flash (EM-MLC) • Hardware BCH-code ECC (40 Bit correction per 2 sectors) • Low-power CMOS technology For quantities greater than listed, call for quote.
Supply Active Voltage Mode 5 5 5 5 3.0/5.0 3.0/5.0 3.0/5.0 5 5 5 5 5 5 5 5
Connector
400, 500 400, 500 400, 500 400, 500 260 260 260 320 320 300 300 300 300 300 960
22-pin SATA 22-pin SATA 22-pin SATA 22-pin SATA 15+7 pin serial ATA w/Latch 15+7 pin serial ATA w/Latch 15+7 pin serial ATA w/Latch 7-pin signal, 15-pin power 7-pin signal, 15-pin power 15+7 pin serial ATA w/Latch 15+7 pin serial ATA w/Latch 15+7 pin serial ATA w/Latch 15+7 pin serial ATA w/Latch 15+7 pin serial ATA w/Latch 22-pin, SATA
Operating Price Each Temperature 1 25 (Cº) -40 to +85 205.52 186.08 -40 to +85 272.50 248.73 -40 to +85 396.14 368.21 -40 to +85 651.45 605.51 -40 to +85 96.92 86.30 -40 to +85 159.70 144.60 -40 to +85 251.47 229.53 -40 to +85 97.23 86.57 -40 to +85 159.70 144.59 -40 to +85 265.73 242.55 -40 to +85 397.24 369.23 -40 to +85 662.34 -40 to +85 1245.73 -40 to +85 2473.63 -40 to +85 4774.01 4774.01
X-200m Swissbit's x-200m Industrial mSATA Solid State Drives (SSD) are small form factor 50.8mm x 29.85 mm x 3.3mm) non-volatile memory drives which provide high capacity data storage. The SSDs are designed after the JEDEC MO-300 full size standard. They have a standard combined connector with SATA and power/control part. The connector is mechanical identical with eeePC card connector, but has different pinout. The card works at a supply voltage of 3.3V. The drive with the SATA interface operates in Mode 2.0 (1.5 or 3.0 Gb/s burst). The drive has an internal intelligent controller which manages interface protocols, data storage and retrieval as well as hardware BCH-code Error Correction Code (ECC), defect handling, diagnostics and clock control. The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time. The hardware BCH-code ECC allows to detect and correct 8 random bits per 528 Bytes. The drive has a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down. For quantities greater than listed, call for quote.
922-603805 922-603806 922-604260 922-604261 922-604262 922-604263 922-604264
SFSA8192U1BR4TO-I-DT-226-STD X-200m 8GB SATA II - 3Gbit/s ATA7 SFSA16GBU1BR4TO-I-QT-226-STD X-200m 16GB SATA II - 3Gbit/s ATA7 SFSA2048U1BR2TO-I-MS-236-STD X-200m 2GB SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SFSA4096U1BR4TO-I-MS-236-STD X-200m 4GB SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SFSA8192U1BR4TO-I-DT-236-STD X-200m 8GB SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SFSA16GBU1BR4TO-I-QT-236-STD X-200m 16GB SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SFSA32GBU1BR4TO-I-NC-236-STD X-200m 32GB SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible)
110/87 3.3/5.0 280 52-pin PCI mini 110/87 3.3/5.0 280 52-pin PCI mini 56/25 3.3 280, 400 52-pin PCI Express mini 100/46 3.3 280, 400 52-pin PCI Express mini 110/87 3.3 280, 400 52-pin PCI Express mini 110/87 3.3 280, 400 52-pin PCI Express mini 93/76 3.3 280, 400 52-pin PCI Express mini
-40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85
133.28 235.15 49.69 76.61 123.28 220.89 402.89
120.68 214.63 44.24 68.21 111.62 200.00 374.48
X-200s The x-200s Industrial slimSATA Solid State Drives (SSD) are small form factor 54mm x 39mm x 4mm non-volatile memory drives which provide high capacity data storage. They have a standard combined connector with SATA and power/control part. The connector is in the plane of the connector as specified in the JEDEC MO-297 specification. The card works at a supply voltage of 5V with an optional 3.3V available. The drive with the SATA interface operates in Mode 2.0 (1.5 or 3.0 Gb/s burst). The drive has an internal intelligent controller which manages interface protocols, data storage and retrieval as well as hardware BCH-code Error Correction Code (ECC), defect handling, diagnostics and clock control. The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time. The hardware BCH-code ECC allows to detect and correct 8 random bits per 528 Bytes. The drive has a voltage detector and a powerful power-loss management feature to prevent data corruption after power-down.
922-603818 922-604277 922-604278 922-604279 922-604280 922-604281 922-604284 922-604286
SFSA32GBV1BR4TO-I-NC-226-STD SFSA2048V1BR2TO-I-MS-236-STD SFSA4096V1BR4TO-I-MS-236-STD SFSA8192V1BR4TO-I-DT-236-STD SFSA16GBV1BR4TO-I-QT-236-STD SFSA32GBV1BR4TO-I-NC-236-STD SFSA8192V1BR4TO-C-DT-236-STD SFSA32GBV1BR4TO-C-NC-236-STD
X-200s X-200s X-200s X-200s X-200s X-200s X-200s X-200s
32GB 2GB 4GB 8GB 16GB 32GB 8GB 32GB
SATA II - 3Gbit/s ATA7 SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible)
93/76 56/25 100/46 110/87 110/87 93/76 110/87 93/76
5 5 5 5 5 5 5 5
For quantities greater than listed, call for quote.
300 260 260 260 260 260 260 260
15+7 pin serial ATA 7-pin signal, 15-pin power 7-pin signal, 15-pin power 7-pin signal, 15-pin power 7-pin signal, 15-pin power 7-pin signal, 15-pin power 7-pin signal, 15-pin power 7-pin signal, 15-pin power
USB FLASH DRIVE MODULES MOUSER STOCK NO.
Swissbit Part No.
922-604435 SFSA030GQ1BJ2TO-I-LB-216-STD 922-604433 SFSA060GQ1BJ4TO-I-LB-216-STD 922-604431 SFSA120GQ1BJ8TO-I-LB-216-STD
X-55 X-55 X-55
30GB 60GB 120GB
Interface
Red/Write (MB/s)
Supply Voltage
Active Mode
SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible) SATA Rev 2.6 - 3Gbit/s (1.5Gbit/s compatible)
240/160 240/160 240/160
5 5 5
400, 500 400, 500 400, 500
380.77 46.30 70.27 113.64 201.89 376.53 107.29 358.59
Operating Temperature (Cº) -40 to +85 -40 to +85 -40 to +85
Price Each 1 205.52 272.50 396.14
25 186.08 248.73 368.21
For quantities greater than listed, call for quote.
MOUSER STOCK NO.
Swissbit Part No.
Series
Memory Size
922-603408 922-604500 922-604502 922-604515 922-604504
SFU21024E1BP2TO-I-MS-111-STD SFU22048E3BP2TO-I-MS-121-STD SFU24096E3BP2TO-I-DT-121-STD SFUI4096J3BP2TO-I-DT-221-STD SFU28192E3BP2TO-I-QT-121-STD
unitedCONTRAST II unitedCONTRAST II unitedCONTRAST II unitedCONTRAST II unitedCONTRAST II
1GB 2GB 4GB 4GB 8GB
© Copyright 2015 Mouser Electronics
409.66 52.00 78.92 125.52 222.98 405.10 118.50 385.79
For quantities greater than listed, call for quote.
Memory Series Size
USB FLASH DRIVES
3140
-40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85
mouser.com/swissbit
Interface USB USB USB USB USB
2.0 2.0 2.0 2.0 2.0
Red/Write (MB/s)
Supply Voltage
Active Mode
Operating Temperature (Cº)
32/23 32/23 32/23 32/23 32/23
5.25 5 5 5 5
120 120 120 180 120
-40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85
(800) 346-6873
Price Each 1 32.18 45.15 64.76 68.46 129.10
25 28.61 40.13 57.67 60.95 116.89
© Copyright 2015 Mouser Electronics
