Iei Ups Battery Total Solution

Transcript

IEI UPS Battery Total Solution ►Providing Emergency Power ►Providing Wide Range DC Power Input A B AFOLUX PPC with Intelligent UPS Module VESA Mount UPS Module UPS Industrial Motherboard c UPS Embedded System ries 00 se M O-ATO eKIN 2 2/915 O-910 eKIN M A-ATO eNOV IBX-6 www.ieiworld.com AUPS Applications power for certain period of time after a power fail has occurred. IEI AUPS Sub-system Benefit: •• Provides Continue to provide stable power to equipment during line sags & spikes. • Absorb power surges & transients. • Smooth out noisy power sources. A.Power Bank Solution AUPS modules act as power input regulator to prevent unstable power input damage and avoid protect against unexpected power loss. B.Mobile System Solution AUPS provides backup power for the data sensitive part of movable equipment, allowing charging and battery replacement of the primary power without shutting down the data terminal. C.Other Relative Applications Production Line Blue Screen Power Fail With AUPS sub-system The IEI Smart Battery is immediately enabled when power failed, and provides stable power so the operator can save important system parameter. Without AUPS sub-system System shuts down or hangs-up suddenly and all data is lost because no backup power is available. Other Fields: Network Surveillance  Medical UPS batter y solution-V1.0 ATM Machine Portable Equipment Point of Sale System What is AUPS? AUPS modules act as power input regulator to prevent unstable power input damage and avoid protect against unexpected power loss. e IEI complete UPS solution equipped with an AUPS sub-system acts as a simple UPS system and provides emergency power when the utility power is not available. IEI motherboard with AUPS sub-system provides wide range DC power input for regulator function to prevent unstable power input damage, and avoid unexpectedly power lost. What is IEI Complete UPS Solution? Economy 2. Efficiency 3. Easy Management 4. Emergency power backup 1. 1. Economy Traditional UPS system is combined by expensive charger circuit, huge battery and many complicated cables. + OLD Expensive charger board + = Complicated cables Huge battery UPS The IEI motherboard integrated with on-board battery charger circuit and a smart battery kit can act as a compact and simple UPS system. It is the best choice for those who are looking for a highly reliable industrial system with UPS function. = + NEW • AUPS charger on board • Wide range DC input • Full function motherboard AUPS Battery kits Compact embedded system with UPS function 2.Efficiency AC Power event Traditional UPS Traditional UPS 70% Power Efficiency Power supply 80% efficiency DC Only 56% DC power input DC 90~95% DC power input AC Plug IEI AUPS Sub-system IEI AUPS Sub-system DC in DC Power event IEI on board DC power module UPS batter y solution-V1.0  3.Easy Management Network Remote Management Anywhere AUPS IP address Network Remote Management Software Battery Capacity Status Power On/OFF Email Status Report UPS Status Monitoring Remote control DC output ON/OFF via web interface. Intelligent Softwrae Utility The remote management software utility and application program allows users to easily get the status of the AUPS and to control the AUPS power functions from anywhere with an Internet connection. Click ALARM to get each AUPS status via internet • STATUS • Send E-mail • Board configuration Network Remote Management Software  UPS batter y solution-V1.0 Battery Monitoring Utility Monitor The Most Critical Battery Functions on the Local Machine The battery monitoring utility allows AUPS status monitoring and provides the ability to change the settings Uninterruptible Power Systems is a significant product that serves as emergency power when you suffer from electric event DC Input Detection Battery Status Detection AUPS STATUS • STATUS shows DC / Battery power input detection Battery Type Battery usage remaining time Battery capacity bar Real time information updating BATTERY STATUS • BAT.A shows Battery status real time monitoring IEI smart battery software • Battery detection • Battery capacity status • Battery charge • DC Input Indicator • Battery Indicator • Temperature warning • Low battery alarm • Connection port status LAN CONFIGURATION DC Input only Normal Icon Charging 50% Capacity 50% Charging 100% Capacity 100% • LAN shows system IP Address information Auto-Scan Connection port Auto Shutdown System shuts down condition by battery capacity setting SETTING • SETTING shows Connection Detection port In addition, the utility software provide the following functions: • Current Power source. • Battery status. • Charging status. • Percentage remaining ABOUT • shows AUPS Utility information Meanwhile, IEI also provides AUPS API SDK and command list for customer programming under DOS or Linux system AUPS API Content AUPS API SDK Inti() AUPS Close() WriteCommand() ReadCommand() Error Code Definition() AUPS API SDK/Content UPS batter y solution-V1.0  AUPS Battery Kits Connection board PN:13ZD337-00-101-RS Connection cable PN: 32100-186100-RS Length 180mm IEI AUPS Battery Kits includes: Battery screw PN:44003-030062-RS M3*6 screw PN: 44003-020101-RS M2*10 screw IEI provides two type AUPS Battery kits for user to choose. • Battery pack Base board Connection board screw BAT-LI-2S2P3800 for BATKIT-2S2P3800-R10 Type1: BATKIT-2S2P3800-R10 (7.4V 3800mAH) BAT-LI-4S2P3800 for BATKIT-4S2P3800-R10 Type2: BATKIT-4S2P3800-R10 (14.8V 3800mAH) Base board • Base board 41024-0125C2-00-RS for BATKIT-2S2P3800-R10 41024-0126C2-00-RS for BATKIT-4S2P3800-R10 • Connection board (PN:13ZD337-00-101-RS) PN: 41024-0125C2-00-RS • Connection cable (PN: 32100-186100-RS) PN: 41024-0126C2-00-RS • Battery screw (PN: 44003-020101-RS) • Base board screw (PN:44003-030062-RS) BAT-LI-4SP3800 BAT-LI-2SP3800 BATKIT-2S2P3800-R10 Battery Model Name BATKIT-4S2P3800-R10 BAT-LI-2S2P3800 BAT-LI-4S2P3800 Li-Ion 2S2P 7.4V Li-Ion 4S2P 14.8V 7.4V 3800mAH 14.8V, 3800mAH Maximum charge voltage 8.4V 16.8V The end of discharging voltage 5.6V 11.2V Battery type Battery capacity Suggestive charging current (Max.) System continuous discharging current(Max) The end of charge condition 2A 2A 7.6A 7.6A 250mA/1Minutes 200mA/1Minutes Battery charge time ( Power off ) 2.5hrs 5hrs Battery charge time ( Power on ) 6.5hrs 13hrs Discharge protection Under Voltage Protection / Over Current Protection Charge protection Over Voltage Protection / Over Current Protection Ambient temperature 0°C~40°C 0°C~40°C Storage temperature -20°C~60°C -20°C~60°C Self-discharge rate Dimensions Weight 340uA~440uA 139mm(L) * 47mm(W)*26mm(H) 165mm(L) * 76mm(W)*26mm(H) 236g 450g Cycle life Backup 300 charge/discharge cycles 60W/10Minutes Safety class Used on eNOVA-ATOM eKINO-ATOM eKINO-9102/9152 Note: Suggest to replace Battery Module every 2 years.  100W/10Minutes CE,UL,TUV UPS batter y solution-V1.0 eNOVA-ATOM eKINO-ATOM (DC input voltage should be over 18V) UPS Industrial Motherboard eKINO-9102/9152 Mini-ITX Motherboard with AUPS sub-system, Intel® Pentium®M/ Celeron®M CPU, Wide range 9-28VDC input DC-In 9~28V IEEE1394a port with bracket to 8pin(1x8) connector CF card LVDS Intel ®910GMLE DDR2 400 Solder Side PCIe Mini card IEEE 1394a DIO 2 x USB Intel® ICH6M Intel® Celeron ®M 1GHz SATA PCI-E 1x KB/MS 5V power IEEE 1394a DC-In COM 1/2 COM 3 VGA Networking UPS Management Port by RJ45 GbE 4 x USB2.0 19800-000103-RS IEI AUPS sub-system Benefit: ● Provides power immediately and maintains power for certain period of time. ● Continues to provide stable power to equipment and absorbs power surges ● Smooth out noisy power sources. IEI motherboard with AUPS sub-system kits BATKIT-2S2P3800-R10 BAT-LI-2S2P3800 2S2P 7.4V 3800mAH Base board Connection board Connection cable Audio Specifications Form Factor Mini ITX CPU On board Intel® Celeron® M 1GHz with 512K L2 Cache CPU Socket479 Intel® Pentium®M/ Celeron®M CPU with 400/533MHz FSB System Chipset Intel 910GMLE+ ICH6-M Intel 915GME+ ICH6-M BIOS AMI BIOS Memory One 200-pin DDR2 400MHz SDRAM SO-DIMM supported (eKINO-9102 system max. 2GB) One 200-pin DDR2 400/533MHz SDRAM SO-DIMM supported (eKINO-9152 system max. 2GB) Ethernet 1 x RTL8111CP PCIe GbE LAN controller Display Output VGA Integrated in Intel ® 910GMLE/915GME 24-bits dual-channel LVDS by Intel® 910GMLE/915GME Graphic Intel® Graphics Media Accelerator 900 I/O Interfaces 6 x USB2.0 2 x SATA with 5V DC output 2x RS-232 1x RS-232/422/485 2 x IEEE1394a(1 port by Rear IO, 1 port by CN3) 1 x 6pin box header (2.0mm pitch) for KB/MS Expansion 1x PCI 1x PCIe mini card 1 x PCIe x1 Digital I/O 8-bit digital I/O, 4-bit input/ 4-bit output Super IO ITE IT8718F Audio AC'97 with Realtek ALC655 codec DC connector 2pcs 1x4pin 5V power connector (Major for 2.5" HDD used) SSD CompactFlash Type II WDT Software programmable supports 1~255 sec. system reset Power Supply Maximum input voltage range 9V~28V Recommend operating input voltage range 12V~24V 1x external DIN 4pin DC jack 1x internal 2x2pin power connector Power Consumption 2.57A@12V(Intel® Celeron®M 1GHz with 2GB DDR2) Temperature Operation: 0°C ~ 40°C with AUPS sub-system Operation: 0°C ~ 60°C without AUPS sub-system Humidity Operation: 5% ~95% non-condensing Dimensions 170mm x 170mm Weight GW: 1100 g / NW: 400g PCI-E Features 1. Equipped AUPS sub-system as a simple UPS system 2. IBX600 Series Embedded System 3. Intel® Pentium®M and Celeron®M FSB400/533 MHz CPU 4. Single voltage wide range 9~28VDC input 5. Support DDR2 400/533MHz SO-DIMM Memory up to 2GB 6. Support PCI Express Mini Card 7. VGA, 24 bits LVDS for Dual Display output 8. CF Socket for SSD Storage Expansion Packing List 1 x eKINO-9102/eKINO-9152 single board computer 1 x KB/MS Y cable (PN:32000-023800-RS) 1 x I/O shielding (P/N:45014-0024C0-00-RS ) 1 x Dual USB cable(PN:32000-070301-RS) 2 x SATA 5V power output cable Kits (P/N:32000-123000-RS ) 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG (Quick Installation Guide) Ordering Information Part No. CF-479B-RS Description Mini-ITX Motherboard with AUPS sub-system, Intel® Celeron® M 1GHz 512K Cache CPU, 910GMLE, Wide range 9-28VDC input Mini-ITX Motherboard with AUPS sub-system, Intel® Celeron® M 1GHz 512K Cache CPU, 910GMLE, Wide range 9-28VDC input, CF Card Mini-ITX Motherboard with AUPS sub-system, Intel® Pentium®M/ Celeron®M CPU, 915GME, Wide range 928VDC input Mini-ITX Motherboard with AUPS sub-system, Intel® Pentium®M/ Celeron®M CPU, 915GME, Wide range 928VDC input, CF Card Embedded system with UPS function, Intel® Celeron® M 1 GHz 512K cache CPU,910GMLE,1GB DDR2,802.11b/g wireless, Li-ion Battery(2S2P), 9~28VDC in, 60W adaptor, white, RoHS CPU Cooler (50mm x 50mm x 26mm, 50W) WMPCIE-V01-R10 PCIe Mini card wireless LAN Module BAT-LI-2S2P3800 2S2P 7.4V 3800mAH SMART BATTERY BATKIT-2S2P3800-R10 2S2P 7.4V 3800mAH AUPS BATTERY KIT 19800-000103-RS Single port IEEE1394a Cable 63000-FSP0601AD101C746-RS 60W/12V Power Adaptor 90VAC~260VA, DIN 4 PIN SAIDE-KIT01-R10 SATA to IDE/CF Converter board eKINO-9102-1G512-R10 eKINO-9102CF-1G512-R10 eKINO-9152-R10 eKINO-9152CF-R10 IBX-600-9102UPS-R10/CM373/1GB UPS batter y solution-V1.0  eKINO-ATOM DIO Intel® 945GSE Mini-ITX SBC with AUPS sub-system, Intel® Atom™ N270 1.6GHz, Wide range 9-28VDC input, VGA/DVI/TV Network AUPS Management Port COM1/2 VGA Dual GbE 5V output COM3~4 KB/MS DC-In Intel® Atom™ Processor HDTV PCI-E 2x SATA PCIe Mini card IDE 2 x USB LVDS BATKIT-2S2P3800-R10 BAT-LI-2S2P3800 2S2P 7.4V 3800mAH Base board Connection board Connection cable Intel® ICH7M Specifications Form Factor Mini ITX CPU Intel® Atom™ Processor N270 1.6GHz with 533MHz FSB 512K L2 Cache System Chipset Intel® 945GSE + Intel® ICH7M BIOS AMI BIOS Memory One 200-pin 400/533 DDR2 SDRAM SO-DIMM supported (system max. 2GB) Ethernet Dual Realtek PCIe 8111CP GbE Controller I/O Interface 6 x USB2.0 3 x RS-232 1 x IDE 2 x SATA with 5V DC output 1 x RS-232/422/485 1 x 6pin header for KB/MS Graphic On Intel® Graphics Media Accelerator 950 (Intel® GMA 950) Display Output VGA integrated in Intel® 945GSE Support HDTV resolution up to 1080i by component interface 18-bits dual-channel LVDS by Intel® 945GSE DVI-D support by Silicon image Sil1362 Expansion 1x PCI 1x PCIe mini card DC connector 2pcs 1x4pin 5V power connector (Major for 2.5" HDD used) Digital I/O 8-bits digital I/O, 4-bits input/ 4-bits output Infrared Interface 1x 5pin pin header SSD 1 x CF Type II Super IO ITE IT8718F Audio Realtek ALC655 AC'97 Codec WDT Software programmable supports 1~255 sec. system reset Power Supply Maximum input voltage range 9V~28V Recommend operating input voltage range 12V~24V 1x external DIN 4pin DC jack 1x internal 2x2pin power connector Power Consumption 1A@12V (Intel Atom N270 with 1GB DDR2) Temperature Operation: 0°C ~ 40°C with AUPS sub-system Operation: 0°C ~ 60°C without AUPS sub-system Humidity Operation: 5% ~95% non-condensing Dimensions 170mm x 170mm Weight GW: 1100g / NW: 400 g  4x USB2.0 Audio DVI UPS batter y solution-V1.0 BATKIT-4S2P3800-R10 BAT-LI-4S2P3800 Base board 4S2P 14.8V 3800mAH Connection board Connection cable (DC input voltage should be over 18V) Features 1. Intel® Atom™ N270 1.6GHz for ultra low voltage fan-less support 2. Wide range 9-28V DC input 3. Equipped with AUPS sub-system acts as a simple UPS system 4. Dual-display supported by VGA + DVI-D, LVDS + VGA, LVDS + DVI-D 5. IBX 600 Embedded System 6. Support 6 x USB2.0, 2 x SATA, 4x COM Packing List 1 x eKINO-ATOM single board computer 1 x Dual RS-232 cable (P/N: 32200-028401-RS) 2 x SATA 5V power output Cable Kit (P/N: 32000-106100-RS) 1 x I/O shielding (P/N: 45014-0023C0-00-RS) 1 x KB/MS Y cable (PN:32000-023800-RS) 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG (Quick Installation Guide) Ordering Information Part No. WMPCIE-V01-R10 Description Mini-ITX SBC with AUPS sub-system, Intel® Atom™ N270 1.6GHz, Wide range 9-28VDC input, VGA/DVI/TV Dual USB cable HDTV Cable Set with S-Video, Composite and Component Interfaces PCIe Mini card wireless LAN Module BATKIT-2S2P3800-R10 2S2P 7.4V 3800mAH AUPS BATTERY KIT BAT-LI-2S2P3800 2S2P 7.4V 3800mAH SMART BATTERY BATKIT-4S2P3800-R10 4S2P 14.8V 3800mAH AUPS BATTERY KIT BAT-LI-4S2P3800 63000FSP0601AD101C746-RS 32200-000009-RS 4S2P 14.8V 3800mAH SMART BATTERY 60W/12V Power Adaptor 90VAC~260VA, DIN 4 PIN 44pin 2.5" IDE cable eKINO-ATOM-N270-R10 CB-USB02-RS HDTVCABLESET-01 eNOVA-ATOM 5.25" SBC with AUPS sub-system, Intel® Atom™ N270 1.6GHz, Wide range 9-28VDC input, Dual PCIe Mini card DDR2 533 Network UPS Management DIO COM1~4 Port by RJ45 CF Type II IDE 5V output Intel® Atom™ Processor PCI-E BATKIT-2S2P3800-R10 Dual PCIe Mini card Intel® 945GSE Base board BAT-LI-2S2P3800 2S2P 7.4V 3800mAH Connection board Connection cable 6x USB2.0 LVDS KB/MS CRT HDTV Intel® ICH7M Audio BATKIT-4S2P3800-R10 Specifications CPU Intel® Atom™ Processor N270 1.6GHz with 533MHz FSB 512K L2 Cache System Chipset Intel® 945GSE / Intel® ICH7M BIOS AMI BIOS Memory One 200-pin 400/533 DDR2 SDRAM SO-DIMM supported (system max. 2GB) Ethernet Dual Realtek PCIe 8111CP GbE Controller Graphic On Intel® Graphics Media Accelerator 950 (Intel® GMA 950) I/O Interface 3 x RS-232 1 x RS-232/422/485 6 x USB2.0 1 x LPT 2 x SATA with 5V DC output 1 x IDE 1 x 6pin header for KB/MS Expansion 1 x PC/104+ (ISA+PCI bus) 2 x PCIe mini card DC connector 2pcs 1x2pin 5V power connector (Major for 2.5" HDD used) Digital I/O 8-bit digital I/O (4-bit input, 4-bit output) Infrared Interface 1x 5pin pin header Super IO ITE8718F Display Output Analog CRT Support for CRT Hot plug Support HDTV by component interface 18-bit dual-channel LVDS Support up to UXGA (1600x 1200) Audio AC'97 ALC655 codec SSD CF Type II TPM 1x 20pin pin header WDT Software programmable supports 1~255 sec. system reset Power Supply Maximum input voltage range 9V~28V Recommend operating input voltage range 12V~24V 1x internal 2x2pin power connector Power Consumption 1.19A@12V (Intel Atom N270 with 1GB DDR2) Temperature Operation: 0°C ~ 40°C with AUPS sub-system Operation: 0°C ~ 60°C without AUPS sub-system Humidity Operation: 5% ~ 95%, non-condensing Dimension 203mm x 146mm Weight GW:1000g, NW:400g BAT-LI-4S2P3800 Base board 4S2P 14.8V 3800mAH Connection board Connection cable (DC input voltage should be over 18V) Features 1.Intel® Atom™ N270 1.6GHz for ultra low voltage fan-less support 2.Equipped with AUPS sub-system acts as a simple UPS system 3.Support Dual PCIe mini Card for expansion 4.Wide range 9-28V DC input 5.Support LVDS, TV-out, VGA display output 6.CF socket for storage expansion 7.TPM support Packing List 1 x eNOVA-ATOM Single Board Computer 1 x VGA cable (P/N: 32000-033804-RS) 1 x KB/MS Y cable (P/N: 32000-023800-RS) 1 x Audio cable (P/N: 32000-072100-RS) 4 x RS-232 cable (PN: 32200-000049-RS) 2 x SATA 5V power output Cable Kit (PN:32000-114000-RS) 1 x USB cable (PN:32000-070301-RS) 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG Ordering Information Part No. Description eNOVA-ATOM-N270-R10 HDTVCABLESET-01 5.25" SBC with AUPS sub-system, Intel® Atom™ N270 1.6GHz, Wide range 9-28VDC input, Dual PCIe Mini HDTV Cable Set with S-Video, Composite and Component Interfaces 32100-088600-RS SATA Power cable 32200-015100-RS LPT cable WMPCIE-V01-R10 802.11b+g PCIe mini card wireless LAN module with Atheros WMUSB-V01-R10 802.11b+g USB embedded module with VIA TPM-WI01-R10 20-pin WINBOND TPM Module, S/W management Tool TPM-IN01-R10 20-pin INFINEON TPM Module, S/W management Tool BATKIT-2S2P3800-R10 2S2P 7.4V 3800mAH AUPS BATTERY KIT BAT-LI-2S2P3800 2S2P 7.4V 3800mAH SMART BATTERY BATKIT-4S2P3800-R10 4S2P 16.8V 3800mAH AUPS BATTERY KIT BAT-LI-4S2P3800 4S2P 14.8V 3800mAH SMART BATTERY UPS batter y solution-V1.0  UPS Embedded System IBX-600-ATOM Mini ITX Intel® Atom™ Solution with AUPS sub-system Battery Support Features 1. Intel® Atom™ N270 1.6GHz Mini ITX solution 2. Supports Slim ODD, 2.5” hard drive 3. UPS function by Li-ion battery with easy assembly design 4. Built-in 802.11b/g wireless with PIFA antenna IEI Smart Battery Monitoring Software. Can support remote monitoring from RJ-45. 5. 12 VDC ~ 24 VDC wide range input Specifications IBX-600-ATOM Model IBX-600-ATOMUPS SBC eKINO-ATOM Processor Intel® AtomTM N270 1.6GHz with 533 FSB Chipset Intel® 945GSE + Intel® 82801GBM/ICH7M System Memory 200-pin 1GB DDR2 SDRAM SO-DIMM Ethernet Dual Realtek RTL8111CP GbE controllers Wireless built in 802.11b/g wireless, PCIe mini card form factor with USB interface VGA interface intergrated in 945GSE DVI -D support by Silicon Image Sil1362 6 x USB 2.0 Display USB Serial Port 2x RS-232 Audio 1 x mic in , 1 x speaker out Storage Power Input UPS Function N/A 1 x slim type ODD, 1 x 2.5” SATA HDD 12 VDC ~ 24 VDC in with 4 pin DC power DIN connector Ship with 60W power adaptor 7.4V 2S2P 3800mAH Li-Ion smart battery Chassis Construction Heavy duty metal with plastic front panel Operating Temperature 0°C~45°C Operating shock 0°C~40°C Half-sine wave shock 3G; 11ms; 3 shocks per axis MIL-STD-810F 514.5C-1 (HDD) MIL-STD-810F 514.5C-2 (CompactFlash) Operating Vibration Weight (Net/Gross) 2.1 kg / 3.9 kg Dimensions (DxWxH) 2.8kg / 4.6kg 306.8mm x 209.8mm x 65mm Mounting Desktop, wall mount EMC/Safety CE, FCC class A Packing List 1 x QIG 1 x screw set with mini jumper 1 x wall mount kit 1 x power adaptor 1 x power cord 1 x SATA CD-ROM cable 1 x driver & manual CD 4 x foot pad 10 Ordering Information Part No. Description IBX-600-ATOM-R10/N270/1GB Embedded system, Intel N270 1.6GHz CPU, Intel 945GSE, built in 1GB DDR2 memory, built-in 802.11b/g wireless, 12~24VDC in, with 60W adaptor, white, RoHS IBX-600-ATOMUPS-R10/N270/1GB Embedded system with UPS function, Intel N270 1.6GHz CPU, Intel 945GSE, built in 1GB DDR2 memory, built-in 802.11b/g wireless, Li-ion Battery(2S2P); 7.4V;3800mAh, 12~24VDC in, with 60W adaptor, white, RoHS UPS batter y solution-V1.0 IBX-600-9102 Mini ITX Intel® Celeron® M Solution with AUPS sub-system Support Features 1. Intel® Celeron® M 1.0GHz Mini ITX solution 2. Supports Slim ODD, 2.5” hard drive and CompactFlash and CompactFlash 3. UPS function by Li-ion battery with easy assembly design 4. Built-in 802.11b/g wireless with PIFA antenna IEI Smart Battery Monitoring Software. Can support remote monitoring from RJ-45. 5. 12 VDC ~ 24 VDC wide range input Specifications Model IBX-600-9102 IBX-600-9102UPS SBC eKINO-9102 Processor Intel® Celeron® M 1GHz 512K cache with 400 MHz FSB Chipset Intel® 910GMLE + Intel® ICH6M System Memory 200-pin 1GB DDR2 SDRAM SO-DIMM Ethernet Realtek RTL8111CP GbE controllers Wireless built in 802.11b/g wireless, PCIe mini card form factor with USB interface Display VGA interface intergrated in 910GMLE USB 6 x USB 2.0 Firewire 1 x IEEE 1394 Serial Port 3x RS-232 Audio 1 x mic in , 1 x speaker out Storage Power Input UPS Function N/A 1 x slim type ODD, 1 x 2.5” SATA HDD, 1 x CompactFlash slot 12 VDC ~ 24 VDC in with 4 pin DC power DIN connector Ship with 60W power adaptor 7.4V 2S2P 3800mAH Li-Ion smart battery Chassis Construction Operating Temperature Heavy duty metal with plastic front panel 0°C~45°C Operating shock Operating Vibration Weight (Net/Gross) 0°C~40°C Half-sine wave shock 3G; 11ms; 3 shocks per axis MIL-STD-810F 514.5C-1 (HDD) MIL-STD-810F 514.5C-2 (CompactFlash) 2.1 kg / 3.9 kg Dimensions (DxWxH) 2.8kg / 4.6kg 306.8mm x 209.8mm x 65mm Mounting Desktop, wall mount EMC/Safety Packing List 1 x QIG 1 x screw set with mini jumper 1 x wall mount kit 1 x power adaptor 1 x power cord 1 x SATA CD-ROM cable 1 x driver & manual CD 4 x foot pad CE, FCC class A Ordering Information Part No. Description IBX-600-9102-R10/CM373/1GB Embedded system, Intel Celeron M 1 GHz 512K cache CPU, Intel 910GMLE, built in 1GB DDR2 memory, built-in 802.11b/g wireless, 12~24VDC in, with 60W adaptor, white, RoHS IBX-600-9102UPS-R10/CM373/1GB Embedded system with UPS function, Intel Celeron M 1 GHz 512K cache CPU, Intel 910GMLE, built in 1GB DDR2 memory, built-in 802.11b/g wireless, Li-ion Battery(2S2P); 7.4V;3800mAh, 12~24VDC in, with 60W adaptor, white, RoHS UPS batter y solution-V1.0 11 Panel PC with Intelligent UPS Module Intelligent UPS Module High Energy Density / Lightweight / Compact DC to DC UPS & Power Module Protect your panel PC from electrical damage and greatly reduce the risk of losing data. The UPS module serves as temporary power during a short break in power and allows a safe system shutdown for longer periods of power loss. D. Networking UPS Management Port by RJ-45 Ethernet 1.DC 9V~36V input by terminal block (Only AUPS-A20 / AUPS-B20) A. Dual Power Input Connector B. Battery Status USB Console Port 2. (1) Only 12V input by DC jack (AUPS-A10 / AUPS-B10) (2) Wide 9V~36V input by DC jack (AUPS-A20 / AUPS-B20) Features • 60W (5A @ 12V) or 100W (8.3A @ 12V) output • 28Wh or 56Wh, for more than 140 minutes operation time (dependent on panel PC power requirements) • Rugged metal enclosure for standard VESA 75/100 mounting • Web-based, remote network management, no software installation required • Local PC-based monitoring software for input detection and battery status monitoring • Auto shut down when battery low • Remote DC output ON/OFF switch for external switch installation • Provides stable power to the PC during line sags and spikes and absorbs power surges and transients, protecting expensive equipment Dimension Battery Capacity Output Power AUPS-A10-R10 AUPS-A20-R10 AUPS-A10-R10 12V AUPS-A20-R10 9~36V 150x95x34mm 28 Wh (Watt/H our) 60W (5A@12V) VESA Support 75x75 mm Model Name Input Power AUPS-B10-R10 AUPS-B20-R10 AUPS-B10-R10 12V AUPS-B20-R10 9~36V 170x150x34mm 56 Wh (Watt/Hour) 100W (8.3A@12V) 75 x 75 mm 100 x 100 mm C.DC Power button DC Remote Power button LED Signal Table 　 Color Function Dark Light Blinking LED 1 Green Power Input DC Power Out DC Power In 　 LED 2 Yellow Charger Status 　 Discharging Charging LED 3 Orange Battery Status 　 Battery Full Battery Low Applications Provide standard VESA mounting to fit in all kind of situations in any application. The fanless embedded system, IBX-530-ATOM which only consumes 15 watts, applied with the AUPS-A20-R10 offers reliable wide range DC input, economical power protection and more than 140 minutes operation time Embedded System IBX-530-ATOM VESA 75/100 Compliance + AUPS-A20-R10 12 UPS batter y solution-V1.0 AUPS module Spec Model Name VESA Type Input voltage Uinated/range AUPS-A10 AUPS-A20 AUPS-B10 AUPS-B20 VESA 75 VESA 75 VESA 75 and 100 VESA 75 and 100 DC +12V DC +9V~+36V DC +12V DC +9V~+36V 1. Adapter is 12V--6A (Load is 60W) 1. Adapter is 12V--9A (Load is 100W) 2. Battery is 6V--12A (Load is 60W) 2. Battery is 12V--9A (Load is 100W) 0.3A (0.2A if Network Management disabled) 500mA 6W 10W 8hrs / 2hrs (Battery empty) DC +12V +/-5% 6~8.4V DC6 V (exhaustive discharge protection) 12~16.8V DC12 V (exhaustive discharge protection) 0A~5A 0A~8.3A Input current rated Input Data Output Data Protection Monitoring Standby power consumption Operation with charging current Operation with charging power consumption Charging time with system ON/OFF Output voltage for normal operation Output voltage for battery operation, approx. output current Efficiency(nominal operation)/power lossat Vin=12V, Iout=80% of full loading short-circuit protection 89% 93% 95% 94% Yes 1.Battery low is 10% of Battery capacity 2.Shuntdown 5% of Battery capacity (Default) 3.The end of Battery discharge voltage is 6V UL, TUV. CE, FCC Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series "mini B" connector to DC-UPS 152mm(L) * 96mm(W)*28mm(H) 174mm(L) * 147mm(W)*35mm(H) 1.2kg 1.8kg DC power input Battery charging Bettery discharging 0°C~40°C -20°C~50°C Exhaustive discharge protection EMC / Safety certification Ethernet interface USB interface Dimensions Weight Green LED Indicator Yellow Orange Operating Tem. Environment Storage Tem. Physical Note1: Suggest to connect DC input constantly. Battery will be drained after 14 hours. Note2: System power consumption + AUPS charging power consumption = Total watts of power source Battery Module spec Model Name AUPS-A10 Battery Model Name AUPS-A20 BAT-LI-2S2P3800 battery type Battery capacity Maximum charge voltage The end of discharging voltage Suggestive charging current (Max.) System continuous discharging current(Max) The end of charge condition Discharge protection Battery Charge protection Ambient temp Storage Tem Self-discharge rate Dimensions Weight Cycle life Backup Safety class Note: Suggest to replace Battery Module every 2 years. AUPS-B10 AUPS-B20 BAT-LI-4S2P3800 Li-Ion 2S2P 7.4V Li-Ion 4S2P 14.8V 7.4V 3800mAH 14.8V, 3800mAH 8.4V 16.8V 5.6V 11.2V 2A 2A 7.6A 7.6A 250mA/1Min 200mA/1Min Under Voltage Protection / Over Current Protection Over Voltage Protection / Over Current Protection 0°C~40°C 0°C~40°C -20°C~60°C -20°C~60°C 340uA~440uA 139mm(L) * 47mm(W)*26mm(H) 165mm(L) * 76mm(W)*26mm(H) 236g 450g 300 charge/discharge cycles 60W/10Min 100W/10Min CE,UL,TUV Selection table for UPS modules and mains buffering time AFOLUX PPC AUPS-A10 AUPS-A20 AUPS-B10 AUPS-B20 Under 50W solution AFL-057-LX (15W~20W) 145min 145min 290min 290min AFL-07A-ATOM (20W~25W) 100min 100min 200min 200min AFL-08AH-ATOM (25W~30W) 70min 70min 140min 140min AFL-10A-ATOM (25~30W) 70min 70min 140min 140min AFL-10A-9103 (40W~45W) 50min 50min 100min 100min AFL-10A-LX (25W~30W) 70min 70min 140min 140min AFL-12A-LX (25W~30W) 70min 70min 140min 140min AFL-12B-CX2 (38W~42W) 50min 50min 100min 100min AFL-12A-ATOM (25W~30W) 70min 70min 140min 140min AFL-12B-9103 (45W~48W) 45min 45min 90min 90min 50W ~ 100W solution AFL-15B-915-CM370 (58W~63W) - - 35min 35min AFL-15C-9652-T7500 (65W~70W) - - 30min 30min AFL-17B-915-CM370 (75W~80W) - - 25min 25min AFL-17C-9652-T7500 (85W~90W) - - 20min 20min AFL-19B-915-CM370 (75W~80W) - - 25min 25min AFL-19C-9652-T7500 (85W~90W) - - 20min 20min BAT-LI-2S2P3800 BAT-LI-4S2P3800 Note: The backup time could be varied on different models or operating temperature. UPS batter y solution-V1.0 13 AFOLUX All-in-One VESA Mount Panel PC Small Size 5.6”~7” Compact All-in-One Touch Panel PC Fanless small size AFOLUX Panel PC is specially focused on interactive control device. Particularly through x86 PC base architecture provides quick developing application software, time to market, and highly compatible to all kind of OS benefits. User can easily choose. AFL-056A AFL-057A AFL-07A Applications: ►Door Access Control System ►Car PC ►Home Automation ►Building Control Terminal 5.6” QVGA 5.7” VGA • QVGA Touch Panel PC • Fanless Design Medium Size 7” WVGA • VGA higher resolution offers more detail • LED-backlight delivers better image and power efficiency \Fanless Design • 16:10 wide screen for better viewing 8.4”~12.1” Medium All-in-One Touch Panel PC Middle size AFL Panel PC is specially focused on human and graphic interface control device. From embedded processor to dual core platform, IEI provides various performance level for different applications and solutions. AFL-08A AFL-10A Light Industrial IP 64 PPCs AFL-12A Applications: ►HMI (Human Machine Interface) ►MES ►POS System ►Shop-flow ►Factory Automation ►Parking System 8.4” SVGA ►ATM Machine 10.4” SVGA • 450 nits high brightness • Fanless Design Large Size 12.1” XGA • Fanless Design • XGA (1024 x 768) High Resolution • Fanless Design • 12.1” Fanless POS System Available 15”~19” Large Size All-in-One Touch Panel PC Big size AFL Panel PC is specially focused on information display and broadcast devices. With many value added accessories, IEI big size AFL panel PC could be easily applied to dedicated applications such as POS, KIOSK, and digital signage solutions. AFL-15A AFL-19A AFL-17A Applications: ►Digital Signage ►Surveillance ►KIOSK ►Gaming ►Vending Machine Control System ►Bus Stop Information Center 15” XGA 17” SXGA • Intel, AMD and VIA complete platform support • Fanless POS System Available • Super expansion capability KIOSK System Available 19” SXGA • Super expansion capability KIOSK System Available • 19" large screen for better viewing Widescreen Small Size Performance Level Platform AMD LX800 5.7" W7" Industrial Solution Industrial Solution Industrial Solution AFL056A-LX AFL-057AAFL-07A-LX LX VIA CX700M AFL-07ACX2 Embedded Computing Single CoreComputing Medium Size 5.6" Intel 945GSE AFL-057A- AFL-07AATOM-R10 ATOM-R10 Intel 915GME / 910GMLE 　 8.4" Industrial Solution In-wall application RFID solution AFL-08AH-LX AFL-08AHCX2 ACT-08A-CX2 AFL-08AHATOM-R10 AFL-408AATOM-R10 ACT-08AATOM-R10 AFL-08BATOM-R10 AFL-408BATOM-R10 ACT-08BATOM-R10 ACT-08A-9103 10.2" 10.4" In-wall application Industrial Solution Industrial Solution AFL-10A-LX AFL-12A-LX AFL-10A-CX AFL-12B-CX AFL-10A-CX2 AFL-12B-CX2 AFL-W410A- AFL-10AATOM-R10 ATOM-R10 12.1" AFL-12AATOM-R10 AFL-10A-9103 AFL-12B-9103 In-wall application 15" POS Industrial Solution application AFL-12BLXPOS AFL-15A-CX AFL-412AATOM-R10 AFL-15AATOM-R10 AFL-15A-915-R11 AFL-15B-915-R11 AFL-315A945-R11 Intel 945G Intel GME965 Dual CoreComputing AFL-15C-9652 　 Intel GM45 AMD 690E 14 KIOSK application UPS batter y solution-V1.0 　 AFL-15B-AM2 3-series KIOSK Panel PC Feature: AFL-315A ►15” and 17” TFT LCD with resistive touch screen ►Sophisticated high reflection surface with black or white color ►Multiple functions and connectors built in the one unit system fits all self service solutions and not only decreases maintenance time but also saves the space considerably ►Versatile mounting solutions and back IO design allows installed in minutes 4-series In-wall Panel PC Feature: AFL-4xxA ►7”~15” fanless system with resistive touch screen ►Changeable face plate sticker available to match diverse decoration styles ►In-wall mounting allows easy installation in minutes Removable Face Plate 5-series Fanless Dual Core Panel PC AFL-517A Feature: ►17” TFT LCD with Intel GM45 chipset and 45nm mobile Core 2 Duo processor support ►High performance fanless with optical drive design AFL-26A Feature: ►42” 1366 x 768 HD large screen with anti-reflection tempered glass protection ►WiFi 802.11b/g/n connection ►Built-in Bluetooth technology rids systems of cables and allows wireless connection to peripheral devices AFL-642A RFID Panel PC Feature: ACT-08A ►8.4” SVGA intelligent access control terminal ►Integrated RFID reader in front of the panel for MIFARE 13.56 MHz or EM 125 KHz RFID tag ►Built-in 300K pixel camera and digital microphone ►WiFi 802.11 b/g connection ►Bluetooth Connectivity Widescreen Widescreen Large Size W15" In-wall application POS application Industrial Solution Vertical Market PPCs 6-series Large Screen Panel PC TV Size 17" Industrial Solution KIOSK application 19" Fanless dual cores Industrial Solution Fanless dual cores W19" 26" 42" 65" Industrial Solution Industrial Solution Large size solution Large size solution AFL-26A-965-R10 AFL-642A-965-R10 AFL-15A-LXPOS AFL-17A-CX AFL-415AATOM-R10 AFL-415AEATOM-R10 AFL-W15AATOM-R10 AFL-19A-CX AFL-W19A-ATOM-R10 AFL-17D-ATOM-R10 AFL-W19B-ATOM-R10 AFL-17A-915-R11 AAFL-19A-915-R11 AFL-17B-915-R11 AFL-19B-915-R11 AFL-317A945-R11 　 AFL-17C-9652 AFL-17D-GM45-R10 AFL-17B-AM2 AFL-19C-9652 AFL-517AGM45-R10 AFL-519A-GM45-R10 AFL-19B-AM2 AFL-W19A-GM45-R10 AFL-665A-GM45-R10 AFL-W19B-GM45-R10 AFL-26A-AM2-R10 AFL-642A-AM2-R10 UPS batter y solution-V1.0 15 eKINO-9102/9152 eKINO-ATOM eNOVA-ATOM IBX-600 Series AFOLUX PPC Series AUPS Series Headquarters 威強工業電腦股份有限公司 IEI Technology Corp. America IEI Technology USA Corp. No. 29, Jhongsing Rd.,Sijhih City,Taipei County, 221, Taiwan TEL : +886-2-86916798 FAX : +886-2-66160028 [email protected] www.ieiworld.com 168 University Parkway, Pomona, CA 91768 TEL : +1-909-595-2819 FAX : +1-909-595-2816 [email protected] www.usa.ieiworld.com China 威強工業電腦 IEI Technology (Shanghai) Co., Ltd. 上海市閔行區宜山路 1728 號 3 樓. 3F No. 1728 Yi-Shan Road, Min-Hang, ShangHai, China TEL : +86-21-3462-7799 FAX : +86-21-3462-7798,3462-7797 [email protected] www.ieiworld.com.cn 2008.11 2008.06