Transcript
ILD-300E-MVD and ILD-310E-MVD
1.3 megapixel resolution minidome network camera Camera Image sensor Sensitivity Shutter Time Day/Night mode Lens options Compression Video Compression Bit Rate Streaming Image Resolution EPTZ Frame Rate
PoE Image Settings streaming
Main features
Encoder Settings
• On-board VCA • 5 megapixel sensor - EPTZ • Effective resolution: 1280×960 • Intellio Video Codec / H.264 / MJPEG • Camera-side bandwidth management • Vandal resistant, metal dome housing
Optional accessories
ILA-PS-24-H-EU
ILA-PS-24-L-EU
(only for ILD-300E-MVD)
Power Consumption Weight Certificates Camera software Motion Detection ILA-PS-24-M-EU
ILA-WMC-MVD wall mount
Intelligent video Detectors
Angle of view Horizontal view angle range
Vertical view angle range
2,8 mm
98°
74°
3,6 mm
76°
57°
6 mm
46°
34°
8 mm
34°
26°
Focal lenght
Network Protocols Security Interface Ethernet Reset Button General Environmental Protection Vandal Resistance Operating Temperature Installation Environment Power
Object Tracker
ILD-300E-MVD
ILD-310E-MVD
Aptina 5MP 1/2.5" CMOS Progressive Scan Day/Night: 1 lux / 0.4 lux Day/Night: 1 lux / 0.01 lux 1/6s - 1/20.000s Software True 2.8 / 3.6 (default) / 6 / 8mm Intellio Video Codec (IVC), H.264, Motion JPEG 32Kbps - 12Mbps Intellio Video Streaming, Dual streaming over RTSP 1280×960; 640×480 1280x960 pixels window of the 5 MP sensor 13fps (IVC 1280×960), 18fps (IVC 640×480) 10fps (MJPEG 1280×960), 15fps (MJPEG 640×480) 8fps (H.264 1280×960), 15fps (H.264 640×480) Brightness, Exposure Control, Gain Control, Anti Flickering (50Hz/60Hz), Saturation, Contrast, Gamma, Day/Night mode (Auto/Day/Night), Preferred Day/Night Mode, Sharpness, Noise Filtering, Image Mirroring Codec Type, Quality, I-frame Distance, Block Sensitivity, Resolution, Frame Limit, Reduced Frame Rate Control, Bandwidth Limit, Pre- and Post-alarm NTP, TCP/IPv4, DHCP, DNS Camera User Name and Password 10BaseT/100BaseTX, RJ-45 Reset To Factory Defaults (IP Address Reset) IP66 0 °C - 50 °C Indoor
IK10
-30 °C - +50 °C Indoor/Outdoor
PoE support (IEEE 802.3af) - PoE PoE support (IEEE 802.3af) - PoE Class 1 (max. UTP cable range 100m) Class 0 (max. UTP cable range 100m) 22-50V DC 200mA (max. UTP cable 22-50V DC 350mA (max. UTP cable range on Cat5e 80m) range on Cat5e 50m) Max. 4W Max. 8W 460g CE: EN 55022, EN 55024, RoHS Compliant 64 polygon per mask, 8 masks, All masks with adjustable sensitivity and motion percent parameters, Separated motion detector for monitoring and for recording Motion Detector Tampering detectors: Covering detection, Rotation detection Tracker based detectors: Intelligent motion detection, Tripwire detection, Entry detection, Direction detection Object based detector: Object removal / theft detection IO port input detector 64 polygon for masking, Object behavior settings, Day-time/Night-time sensitivity, Environmental settings
Dimensions
Smartcameras | 17
