Transcript
ATX server board supports 32nm LGA2011 Intel® Xeon® E5 series up to 8 cores CPU per Intel® C604 with DDR3, VGA, Dual Intel® PCIe GbE, PCIe Gen 3.0, SAS 3Gb/s, SATA 6Gb/s, SATA 3Gb/s, USB 2.0, HD Audio and RoHS
IMBA-C604EP Quick Installation Guide Version 1.0 Jun 24, 2013.
Package List IMBA-C604EP-R10 package includes the following items: 1 x IMBA-C604EP Single Server Board Computer 1 x I/O Shielding (P/N: 45014-0039C0-00-RS) 4 x SATA Cable (P/N: 32000-062800-RS) 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG (Quick Installation Guide) 1 x One Key Recovery CD
©2013 Copyright by IEI Technology corp. All rights reserved. 1
Specifications CPU: LGA2011 socket supports Intel® Xeon® E5-16xx, E5-26xx, E5-46xx series processor up to eight cores Chipset: Intel® C604 BIOS: UEFI BIOS System Memory: Eight 240-pin 1600/1333MHz dual-channel DDR3 SDRAM UDIMMs w/ ECC or non-ECC/RDIMMs/LRDIMMs supported (system max. 64GB w/ UDIMMs, 128GB w/RDIMMs, 256GB w/ LRDIMMs) Graphic Engine: ASPEED AST1300 PCIe VGA/2D controller, 1920x1200@60Hz 32bpp Display Output: 1 x VGA (driver form AST1300) Ethernet: Dual Intel® 82574L PCIe controller Server Management: 1 x RJ-45 for Intelligent Platform Management Interface (IPMI) v.2.0 IPMI 2.0 with virtual media over LAN and iKVM-over-LAN support I/O Interface: 1 x RS-232 1 x PS/2 KB/MS 11 x USB 2.0 (4 on rear, 6 by pin header, 1 by type A) 2 x USB 3.0 (on rear I/O) 4 x SATA 3Gb/s (RAID 0,1,10,5 support) 2 x SATA 6Gb/s (RAID 0,1,10,5 support) 4 x SAS 3Gb/s (RAID 0,1,10 support) Super I/O: Fintek F81866 Digital I/O: 8-bit Digital I/O (4-bit input / 4-bit output) 2
Expansion: 4 x PCIe x8 slot Audio: Realtek ALC662 HD audio codec (Line-out, Mic) Front Audio: 2 x 5-pin header Front Panel: 1 x Front panel connector (power LED, HDD LED, speaker, power button, reset button) SMBus: 1 x 4-pin wafer I2C: 1 x 4-pin wafer PSMI: 1 x 5-pin box header Watchdog Timer: Software programmable support 1~255 sec. system reset FAN: 1 x 4-pin CPU fan connector 5 x 4-pin system fan connector Power supply: ATX/AT power supply Power Consumption:
[email protected],
[email protected],
[email protected],
[email protected],
[email protected] (Intel® Xeon® E5-2658 2.1GHz with four 1333 MHz 4 GB DDR3 memory) Operation Temperature: -10°C ~ 60°C Operation Humidity: 5% ~ 95%, non-condensing Dimensions: 244mm x 305mm Weight GW/NW: 1200g / 700g
3
Ordering Information
IMBA-C604EP-R10: ATX server board supports 32nm LGA2011 Intel® Xeon® E5 series up to 8 cores CPU with Intel® C604, DDR3, VGA, dual Intel® PCIe GbE, PCIe Gen 3.0, SAS 3Gb/s, SATA 6Gb/s,SATA 3Gb/s, USB 2.0, HD Audio and RoHS
CB-USB02-RS: Dual-port USB cable with bracket
19800-000051-RS: RS-232 cable, 230mm
32102-000100-200-RS: SATA power cable
CF-2011A-RS: High performance LGA2011 cooler kit, 1U chassis compatible, 130W
CF-2011B-RS: High performance LGA2011 cooler kit, 2U chassis compatible, 130W
TPM-IN01-R11: 20-pin Infineon TPM module, software management tool, firmware V3.17
4
Jumpers setting and connectors LABEL
FUNCTION
AT mode or ATX mode Selection JATX_AT1 USB_PWR1-6 Select +5v or +5v_dual CMOS State Setting CMOS_CLR1 SATA1,2,3,4,5,6 Serial ATA 3.0 & 2.0 Connector SSI_F_PANEL1
Front Panel connector
TPM1
Trusted Platform Module connector
COM2
Internal
DIO1
Digital I/O Connector
Serial Port DB-9 Connectors
FP_AUDIO1
Front Panel Audio Connector
AUDIO_CV1
HD AUDIO Connector
ATX1 CPU12V1 CPU_FAN1 SYS_FAN1-5
24Pin ATX Power Supply Connector +12V Power Source Connector CPU FAN SYSTEM FAN
KB_MS1
PS/2 MOUSE & KEYBOARD Connector
USB1-3
Internal USB2.0 Connectors
VGACOM1
External
Serial Port DB-9 Connector & VGA
LAN2_USB01_2 RJ45 LAN and USB2.0 Connector LAN1_USB3_1
RJ45 LAN and USB3.0 Connector
LAN2_USB01_1 USB2.0 Connector I2C_1
I2C connector
SMBUS_1
SMBUS connector
USB4
USB2.0 Connector
JCHASSIS1
Chassis connector
SAS_LED1
SAS_LED connector
SAS_SMBUS1 PMBUS1
SAS_SMBUS1 connector PMBUS connector
SAS1-4
SAS/SATA Connector
IPMB1
IPMB connector
5
JATX_AT1: AT/ATX mode select PIN NO. DESCRIPTION Open Short (default)
AT Mode ATX Mode
USB_PWR1-6: Select +5v or +5v_dual PIN NO. DESCRIPTION 1-2 (default)* +5V_Dual Short 2-3 +5V CMOS_CLR1 : Clear CMOS Setup PIN NO. DESCRIPTION OPEN Keep CMOS Setup(default) (default) (Normal Operation) Short Clear CMOS Setup SATA1、 、SATA2 : Serial ATA 3.0 Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 5 RXN GND 2 TXP 6 RXP 3 TXN 7 GND 4 GND 8 N/C SATA3~6 : Serial ATA 2.0 Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 2 3 4 9 11 13
GND TXP_A TXN_A GND TXP_B GND RXP_B
5 6 7 8 10 12 14
RXN_A RXP_A GND GND TXN_B RXN_B GND
6
SSI_F_PANEL1 : PWR & RST Buttons and Indicators panel PIN DESCRIPTION PIN DESCRIPTION 1 +3.3V_DSW 2 +3.3V_DSW PWR_LED 3 NC 4 V_5P0_A 5 PWRLED# 6 ID_LED#_FP 7 +3.3V 8 GR_LED_FP# HDD_LED 9 HDD_LED# 10 AM_LED_FP# PWRBTN_SW#_ 12 11 +V3.3LAN1 LAN1_LED PWR_BTN C 13 GND 14 LAN1_LED# 15 EXTRST16 SMB_FRU_T_3 VSB_DATA RESET 17 GND 18 SMB_FRU_T_3 VSB_CLK 19 ID_BT_FP# 20 CHASSIS_OPE N 21 +3.3V_DSW 22 +V3.3LAN2 LAN2_LED 23 NMI_BT_FP# 24 LAN2_LED# TPM1:Trusted Platform Module connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 LCLK 2 GND2 3 LERAME# 4 KEY 5 LRESRT# 6 +5V 7 LAD3 8 LAD2 9 +3V 10 LAD1 11 LAD0 12 GND3 13 SCL 14 SDA 15 SB3V 16 SERIRQ 17 GND1 18 GLKRUN# 19 LPCPD# 20 LDRQ# COM1~2 : External Serial Port Connector PIN NO. DESCRIPTION PIN NO. 1 -NDCD1 6 2 -NDSR1 7 3 NSIN1 8 4 -NRTS1 9 5 NSOUT1 10
DESCRIPTION -NCTS1 -NDTR1 -XRI1 GND GND 7
DIO1 : Digital Input / Output Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 VCC 3 Output 3 4 Output 2 5 Output 1 6 Output 0 7 Input 3 8 Input 2 9 Input 1 10 Input 0 FRONT-PANEL1 : Audio Source Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 2 AUD GND LMIC2_L 3 LMIC2_R 4 PRESENCE# 5 LLINE2-R 6 MIC2-JD 7 F_SENSE 8 NC 9 LLINE2-L 10 LINE2-JD AUDIO_CV1: HD Audio Connector PIN NO. DESCRIPTION Line-out Connect this port to headphone or speaker Microphone Connect this port to microphone ATX1: 24Pin ATX Power Supply Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 13 +3.3V +3.3V 2 14 +3.3V -12V 3 15 GND GND 4 16 +5V -IO_PSON 5 17 GND GND 6 18 +5V GND 7 19 GND GND 8 20 PWRGD_PS NC 9 21 V_5P0_A +5V 10 22 +12V +5V 11 23 +12V +5V 12 24 +3.3V GND
8
ATX12V1 : +12V MAIN POWER Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 GND 3 GND 4 GND 5 +12V 6 +12V 7 +12V 8 +12V CPU_FAN1 : CPU Fan Connector PIN NO. DESCRIPTION 1 GND 2 +12V 3 FANIO1 4 PWM SYS_FAN1-5 : SYS Fan Connector PIN NO. DESCRIPTION 1 GND 2 +12V 3 FANIO1 4 PWM KB_MS1: PS/2 Keyboard & Mouse Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 Keyboard Data 7 Mouse Data 2 NC 8 NC 3 GND 9 GND 4 VCC 10 VCC 5 Keyboard Clock 11 Mouse Clock 6 NC 12 NC USB1~3: Internal USB Connectors PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 VCC 2 VCC 3 DATA4 DATA5 DATA+ 6 DATA+ 7 GND 8 GND 9 KEY 10 NC 9
COM1: External Serial Port Connector PIN NO. DESCRIPTION 1 DATA CARRIER DETECT (DCD1) 2 RECEIVE DATA (RXD1) 3 TRANSMIT DATA (TXD1) 4 DATA TERMINAL READY (DTR1) 5 GND (GND1) 6 DATA SET READY (DSR1) 7 REQUEST TO SEND (RTS1) 8 CLEAR TO SEND (CTS1) 9 RING INDICATOR (RI1) VGA1 : 15-pin Female Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RED 2 GREEN 3 BLUE 4 NC 5 GND 6 GND 7 GND 8 GND 9 VCC 10 GND 11 NC 12 DDCDAT 13 HSYNC 14 VSYNC 15 DDCCLK LAN2: LAN Port Connector PIN NO. DESCRIPTION PIN NO. 1 MDIA35 2 MDIA3+ 6 3. MDIA27 4. MDIA18
DESCRIPTION MDIA1+ MDIA2+MDIA0MDIA0+
USB01_2: USB2.0 Port Connector PIN NO. DESCRIPTION 1 2 3 4
VCC DATADATA+ GND
10
LAN2: LAN Port Connector PIN NO. DESCRIPTION PIN NO. 1 MDIA35 2 MDIA3+ 6 3. MDIA27 4. MDIA18 USB3_1: USB3.0 Port Connector 1 VBUS 2 3 D+ 4 5 STDA_SSRX_N 6 7 GND_DRAIN 8 9 STDA_SSTX_P
DESCRIPTION MDIA1+ MDIA2+MDIA0MDIA0+
DGND STDA_SSRX_P STDA_SSTX_N
LAN2_USB01_1 : External USB Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 USB_VCC 2 USB_VCC 3 DATA4 DATA5 DATA+ 6 DATA+ 7 GND 8 GND
PIN NO. 1 2 3 4
I2C_1: I2C Connector DESCRIPTION +5V_DUAL I2C_DATA_GPIO I2C_CLK_GPIO GND
SMBus_1: SMBus Connector PIN NO. DESCRIPTION 1 +5V_DUAL 2 SMBCLK 3 SMBDATA 4 GND
11
USB4: USB2.0 Connector PIN NO. 1 2 3 4
DESCRIPTION VCC DATADATA+ GND
JCHASSIS1: Open Chassis Connector PIN NO. DESCRIPTION 1 CHASSIS_OPEN 2 GND SAS LED1: SAS LED Connector PIN NO. DESCRIPTION 1 GPIO_CLK1 2 SGPIO_LD1 3 SGPIO_DIN1 4 SGPIO_DO1 SAS_SMBus1: SAS SMBus Connector PIN NO. DESCRIPTION 1 +3.3V L 2 SMB_SASCLK0 3 SMB_SASDATA0 4 GND PMBUS1: PMBUS Connector PIN NO. DESCRIPTION 1 PMBUS_CLK 2 PMBUS_DAT 3 PMBUS_ALERT# 4 GND 5 +3.3V
12
SAS1-4 : SAS Connector PIN NO. DESCRIPTION 1 GND 2 TXP 3 TXN 4 GND
PIN NO. 5 6 7 8
DESCRIPTION RXN RXP GND N/C
IPMB1: IPMB Connector PIN NO. DESCRIPTION 1 SMB_IPMB_3VSB_DATA 2 GND 3 SMB_IPMB_3VSB_CLK 4 V_5P0_A
13
Board Layout: Jumper and Connector Locations
（Unit: mm） ）
14
