Transcript
Seria Przemysłowa konwertery mediów
IMC-1000M/1000M-E
10/100/1000Base-T(X) to 100/1000Base SX/LX OAM and Web Management Fiber Converter
IMC-1000MS/1000MS-E
10/100/1000Base-T(X) to 100/1000BaseX SFP OAM and Web Management Fiber Converter
IMC-1000M(-E) oraz IMC-1000MS(-E) to konwertery klasy przemysłowej wyposażone w port miedziany 10/100/1000Base-T(X)oraz wolny slot SFP 100/1000Base-X lub dostępny w wersj z zabudowaną optyką ze złączem SC. Urządzenia posiadają solidną metalową obudowę wytrzymałą na uszkodzenia mechaniczne oraz długi MTBF gawarantujący stabilną i niezawodną jakość pracy. Sprzęt w wersji (-E) przeznaczony jest do pracy w rozszerzonym zakresie temperatur oraz do montażu na ścianie lub szynie DIN. Konwerter ma możliwość zazrądzania Web Smart OAM, które to zapewnia prostą kontrolę nad urządzeniem, gdzie ma mozliwość kontrolowania pasma, prękości konfiguracji sieci VLAN. Urządzenia są zgodne ze standardem IEEE802.3ah, dzięki czemu przy komnukacji z przełącznikiem również zgodnym z tym standardem wpiera funkcję "loop back" oraz "dying gasp".
Features Conversion between 10/100/1000Base-T(X) and 100/1000BaseX Fiber cable interface Supports Dual Rate (100/1000) SFP for selectable Fast or Gigabit speed on fiber Redundant dual DC input Power 12/24/48VDC (9.6 ~ 60VDC) IP30 rugged metal housing Wide operating temperature -20~75°C (IMC-1000M-E, IMC-1000MS-E ) UL508, CE, FCC, RailWay traffic EN50121-4 certification Industry grade EMS,EMI EN61000-6-2 ,EN61000-6-4 certification Support Jumbo frame 9K bytes packet Ingress/Egress Bandwidth control
Supports IEEE802.3ah OAM management (In-band management) Remote loop back test Dying gasp (remote power failure detection) SNMP alarm trap for Power loss and Port link down Auto laser shutdown (ALS) Digital Diagnostic DDM for SFP Support Web management on stand-alone. Supports 16 IEEE802.1Q Tag VLAN Group RMON counters
Specifications Standard
Fiber Ports
RJ45 Ports CPU watch dog Push button Jumbo frame Fiber Parameters
Link Lose Forward
Connector
IEEE802.3 10Base-T IEEE802.3u 100Base-T(X) IEEE802.3ab 1000Base-T(X) IEEE802.3z 1000BaseSX/LX IEEE802.3x Flow Control and Back pressure IEEE802.3ah OAM management IEEE802.1q Tag VLAN 1000Base SX/LX (IMC-1000M, IMC-1000M-E), 100M /1000M Speed set by Web (IMC-1000M, IMC-1000M-E )
Support Auto laser shutdown (ALS) Set by Web SFP Speed (100Base-X or 1000Base-X) Set by Web (IMC-1000MS, IMC-1000MS-E ) 10/100/1000Base-T(X)
Present Reset, Load default seting 9K bytes Fiber Cable (Multi-mode): 50/125um,62.5/125um Fiber Cable (Single-mode): 9/125um Wavelength: 1310nm (Multi-mode/Single-mode) Available distance: 500M (Multi-mode SX) 20KM (Single-mode) 40KM (Single-mode) (IMC-1000M , IMC-1000M-E) SFP, Distance depend on plug Fiber Tranceiver (IMC-1000MS, IMC-1000MS-E) TX-- Fiber: If TX port link down, the media converter will force Fiber port to link down Fiber--TX: If Fiber port link down, the media converter will force TX port to link down Fiber: SC (Multi-mode, 500M), SC (Single-mode, 20KM, 40KM) (IMC-1000M, IMC-1000M-E)
SFP Slot (IMC-1000MS, IMC-1000MS-E ) RJ-45: CAT 5 (10/100/1000Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support
LED
Per Unit : Power 1 (Green ), Power 2 (Green), Fault (Amber ) Fiber LNK/ACT (Green): ON: Connected to network OFF: Not connected to network BLK: Receive /Transmit Data Fiber speed (Yellow) :On : 1000BaseX Off: 100 Base X RJ-45 port: Speed: 10 (OFF), 100 (Green), 1000 (Yellow) LNK/ACT for RJ45(Green): ON : Connected to network/ OFF: Not connected to network/ BLK: Networking is active
IMC-1000M/1000M-E, IMC-1000MS/1000MS-E
Reverse polarity protectionPresent for Power Input Overload current protectionPresent 12/24/48VDC (9.6~60VDC) , Redundant power with Power Supply polarity reverse protect function and removable terminal block Provide DC Power JACK adapter cable for external power adapter Relay outputs with current carrying capacity of 1 A Alarm Relay @24VDC Relay Alarm Output for Power Fail or Port link down Removable terminal block Provide 2 Redundant power ,Alarm relay contact, 7 Pin TBD Power Consumption 5% ~ 95% (Non-condensing ) Operating Humidity Operating Temperature 0° ~ 60°C (IMC-1000M, IMC-1000MS ) -20 ~ 75°C (IMC-1000M-E, IMC-1000MS-E ) Storage Temperature -40 ~ 85°C Rugged Metal ,IP30 Protection Housing 38.6 x 106 x 142mm (W x D x H) Case Dimension TBD Weight DIN Rail mounting and Wall Mounting Installation FCC Part 15 Subpart B Class A, EN 55022 Class A EMI EN 61000-6-4 - Emission for industrial environment EN 61000-6-2 – Immunity for Industrial environment EMS EN61000-4-2 (ESD) Level 3,Criteria B EN61000-4-3 (RS) Level 3,Criteria A EN61000-4-4 (EFT) Level 3,Criteria A EN61000-4-5 (Surge) Level 3,Criteria B EN61000-4-6 (CS) Level 3,Criteria A EN61000-4-8 (Magnetic Field) Level 3,Criteria A UL508 (pending) Safety EN 50121-4 RailWay Traffic IEC 60068-2-27 Shock IEC 60068-2-32 Freefall IEC 60068-2-6 Vibration TBD (Above 30 years ) MTBF 5 years Warranty
CTC UNION TECHNOLOGIES CO., LTD.
w w w.c tcu.com
Ethernet Media Converters Software Specifications Management
Supports in-band remote management from FRM220 rack management OAM Function: IEEE802.3ah configuration, Loopback test, IEEE802.3ah status
Ingress/Egress Bandwidth control with 64K granularity Supports IEEE802.3ah OAM management, loop back and dying gasp (Remote power failure detection ) Firmware upgrade via Web
OAM
Web management on stand-alone (Local ) Support SNMP ,MIB for management OAM In band management (Remote ) Supports DHCP client for automatic TCP/IP configuration
Diagnostic & Monitor Remote loop back test Dying gasp (remote power failure detection) Supports Link Fault Pass-Through ( LFPT ) Function Supports DDM Diagnostic function for SFP fiber transceiver Baoadcast/Muticast/Unicast storm filter
SNMP alarm trap for Power loss and Port link down
Remote Configuration : IP Configuration, Converter Configuration, Port Configuration, MIB Counter, VLAN group Configuration, Alarm configuration
Application
Central Office (CO) EMS (Element Management System)
Fiber
Gigabit Ethernet
~ ~
Gigabit Ethernet LAN
LAN
IMC-1000M or IMC-1000MS
Central Office (CO)
Customer Premise Equipment (CPE)
EMS (Element Management System)
IP Networking
Fiber OAM Remote Management (In-Band Management )
Router/Switch
Fiber
FRM220-1000MS Inserts in FRM220-CH20 chassis
Gigabit Ethernet IMC-1000M or IMC-1000MS
LAN
Gigabit Ethernet
OAM Remote Management (In-Band Management )
IMC-1000M or IMC-1000MS
LAN
Dimensions
30.00 38.60 15.20
106.00
45.72
38.60
15.20
184.00
50.53
142.10
142.10
14.50
30.00
4.57
IMC-1000M Side View
IMC-1000MS
Front View
Rear View
Ordering Information Description
IMC-1000M
Industrial OAM and Web Management 10/100/1000Base-T(X) to 100/1000Base SX/LX Fiber Converter (0 ~ 60˚C) Industrial OAM and Web Management 10/100/1000Base-T(X) to 100/1000Base SX/LX Fiber Converter (-20 ~ -75˚C)
Fiber Connector Type
Connectivity Distance
SC
001:500M (M/M) 020:20km (S/M) 040:40km (S/M) 020A: WDM 20km A type (TX:1310nm) 020B: WDM 20km B type (TX: 1550nm)type
Ordering Information (Use for SFP model ) Model Name
Description
IMC-1000MS
Industrial OAM and Web Management 10/100/1000Base-T(X) to 100/1000Base SFP Fiber Converter (0 ~ 60˚C) Industrial OAM and Web Management 10/100/1000Base-T(X) to 100/1000Base SFP Fiber Converter (-20 ~ -75˚C)
IMC-1000MS-E
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
CTC UNION TECHNOLOGIES CO., LTD.
Wall-Mount Kit View
Temperature
Model Name IMC-1000M-E
DIN-Rail Kit View
Connector Type
Connectivity Distance
IMC – 1000M – □– □□□□□ Example: IMC – 1000M – E – SC002
Temperature
IMC – 1000MS – □ Example: IMC – 1000MS – E
w w w.c tcu.com IMC-1000M/1000M-E, IMC-1000MS/1000MS-E
2 Ethernet Media Converters
Supports 802.1Q tag VLAN,16Tag VLAN group, RMON counters display (Stand-alone only) Local configuration : IP Configuration, Password Setting, Converter Configuration, Port Configuration, MIB Counter, SNMP configuration, VLAN group Configuration, Alarm configuration
