Transcript
PLACE EDGE OF TEMPLATE AGAINST FRAME STOP
6.25 158.8
11.80 299.7
5.90 149.9 .70 17.8
DRILL 1/2" [12.7] DIA. HOLE FOR WIRE FEED THRU
(LOCK HOUSING)
.35 8.9 [B]
[B]
DRILL 3/8" [9.5] DIA. HOLE FOR METAL - OR 3/16" [4.8] DIA. X 1-1/4" [32] DEEP HOLE FOR WOOD (2 PLACES)
.30 7.6
[A]
[A]
PLACE EDGE OF TEMPLATE AGAINST FRAME STOP
CL
12.50 317.5
[B]
[A]
CL
[B] .15 3.8 2.13 54
5.50 139.7
DOOR FRAME DRILL 9/64" [3.6] DIA. HOLE X 5/8" [15.9] DEEP INTO DOOR (2 PLACES)
CL
DOOR FACE
DRILL 3/8" [9.5] DIA. X 1-3/8" [35] MIN. DEEP HOLE FOR ROLL PIN
1.92 48.7
CL
(DPS STRIKE)
(SCALE MAY BE AFFECTED)
2.00 50.7
[A] [A] [C]
2.13 54
.80 20.3
[A]
iMXDa INSTALLATION TEMPLATE P/N 500-20310-B
.62 15.8
iMXDa
(OF STRIKE)
1.06 27
DO NOT PHOTOCOPY TEMPLATE!
.97 24.6
DRILL 1" [25.4] DIA. HOLE THRU DOOR FOR SB-MXD SEX BOLT
[A]
(ACTUATOR)
1.88 47.6
DRILL 3/16" [4.8] DIA. FOR METAL - OR 7/32" [5.5] DIA. X 2-3/4" [70] DEEP HOLE FOR WOOD (4 PLACES)
(OF LOCK)
FOLD ALONG DOTTED LINE
DIMENSIONS WITHIN BRACKETS [XX.X] REPRESENT METRIC MEASUREMENT IN MILLIMETERS.
2.75 69.9
4.75 120.7
2.25 57.2
1.60 40.6
[C] THESE HOLES MAY BE MARKED USING THE SB-MXD SEX BOLT. (SEE STRIKE MOUNTING PROCEDURE STEP #8 IN THE INSTALLATION INSTRUCTIONS). DRILL 3/16" [4.8] DIA. X 1/4" [6.4] DEEP HOLE (2 PLACES). FAR SIDE OF DOOR!
CL
FOR PROPER INSTALLATION PLEASE FOLLOW THE STEP-BY-STEP DIRECTIONS INCLUDED IN THE INSTALLATION AND OPERATING INSTRUCTIONS
