Transcript
HUMAN/MACHINE INTERFACES & MONITORS
the expert approach
“In Car” Displays
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS
the expert approach
In-Car Touch Screen & PC Solutions
8.4” Lcd Touch Screen 8.4” Lcd Touch Screen + Video 10.4” Lcd Touch Screen 8.4” Lcd Touch Screen (Slim Model SVGA) 8.4” Lcd Touch Screen (Slim Model XGA) “Basic” 8.4” All-In-One Integrated PC 6.5” In Car Display LCD Head Monitor 8.4” In Car Display LCD Head Monitor 8.4” In-Car Touchscreen LCD Head Mount Display 8.4” Rugged LCD In-Car Touchscreen PC Display (MDT - Mobile Data Terminal)
Din-E Mounting Bracket Adaptor Vesa Mounting Bracket Adaptor See next pages
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS
the expert approach
8.4” LCD Touch Screen - ICD-812 High brightness TFT screen with anti-reflective resistive touch screen with rugged aluminum housing. Specifically designed for use in vehicles and in direct sunlight conditions. 100% - 0% dimming functionality, 12v DC input, USB touch screen interface. This model is tested and approved to SPEC-5 for use in Police vehicles. SVGA resolution version (800 x 600)
8.4” LCD Touch Screen + Video - ICD-822 High brightness TFT screen with anti-reflective resistive touch screen with rugged aluminum housing. Specifically designed for use in vehicles and in direct sunlight conditions. 100% - 0% dimming functionality, 12v DC input, USB touch screen interface, Composite VIDEO input (PAL/ NTSC), source select switch to cycle between VGA (MDT) and VIDEO source. This model is also designed to comply with SPEC-5. SVGA resolution version (800 x 600)
10.4” LCD Touch Screen - ICD-1012 High brightness TFT screen with anti-reflective resistive touch screen with rugged aluminum housing. Specifically designed for use in vehicles and in direct sunlight conditions. 100% - 0% dimming functionality, 12v DC input, USB touch screen interface. This model is also designed to comply with SPEC-5. XGA resolution version (1024 x 768)
8.4” LCD Touch Screen (Slim Model SVGA) - ICD-815 The xx5 series displays are primarily designed as a form and fit replacement solution for a range of existing products used in the market. The brightness dimming control for this solution can be attached to the rear of the unit via a lead and fixed to range of positions on the vehicle dash. This model uses a high brightness 1000 nit TFT. This model is also designed to comply with SPEC-5. (The bezel size of this range is approximately 208mm x 158mm) SVGA resolution version (800 x 600)
8.4” LCD Touch Screen (Slim Model XGA) - ICD-815X This alternative to the ICD-815 is a higher resolution TFT model, which will handle the higher resolutions of more detailed image applications. While the SVGA modelICD-815 is the more standard resolution for an 8.4” screen, some software can only be displayed clearly on the higher resolution. This model also uses a high brightness 1000 nit TFT and is also designed with comply to SPEC-5. XGA resolution version (1024 x 768)
8.4” LCD Touch Screen (Slim Model XGA) “Basic” - ICD-815X-S This version of the ICD-815x is a lower cost solution which is the same in every way to the other 8x5 range with a slightly low spec. It has a more simplistic resistive touch screen solution which has an Anti-Glare surface rather than the more effective Anti-Reflective Polarized enhancement utilized on the rest of our range. It has a more standard brightness 500 nit TFT. This model is also designed to comply with SPEC-5. XGA resolution version (1024 x 768) See next pages
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS
the expert approach
8.4” Integrated PC with LCD Touch screen - ICD-850 This unit is a fully integrated PC touch screen display module with integrated: SIM card for 3G and GPS positioning (including integrated aerial and antenna for vehicle use), Microphone/Speaker, SMART CARD reader (for secure log-in), SSD Hard Drive (removeable), WEB Camera (in-car facing), ‘Power Management System’, which turns off the system when the car is not occupied.
Standard PC connector interfaces are brought out on the rear of the DIN housing. RS232 serial 9 way ‘D’ (can be used to interface with a range of equipment e.g tracker). USB, to interface with any peripherals like a keyboard. 3G SMA aerial port, only needed if the signal needs to be boosted in a particularly bad signal area. There is also a removable cover on the side of the DIN which provides access to the SSD hard drive and SIM CARD.
The built in SMART CARD reader enables the MDT to only be used by authorized personnel. It also means that if the card is removed (during an on foot pursuit) the system can be locked, securing the sensitive access to data.
Basic model Specifications •1 .6GHz Intel Atom •2 GB RAM •3 2GB SSD HD •O n-board Graphics •3 G module (SIM slot) •G PS module • Integrated aerial and antenna
x2 USB ports are available in the head of the unit via removable cover plate for maintenance access while fitted to a vehicle.
• Integrated SMART CARD reader • Speaker • Microphone • WEB CAM (in-car Facing) • Deep Dimming backlights • Composite VIDEO input (optional extra)
Mounting Accessories DIN-E Mounting Bracket Adaptor - 29BR0172-DIN-E VESA Mounting Bracket Adaptor - 29BR0172-VESA This mounting bracket is designed to fix onto the rear of any xx2 series display. It provides a solution for fixing the display to a vehicle standard DIN-E radio slot. The bracket is equipped with suitable locking mechanism which will secure the display into the frame of the radio slot. The wide viewing angles on the displays mean that it is unnecessary for the screen to be moved once fitted. See next pages
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS High Quality, LCD Monitor Head KME has developed this display module for use in vehicles where an economically priced XGA TFT flat panel monitor is required with a bright screen and wide viewing angles. The ICD-610 series is supplied with HelioviewTM transflective technology to improve viewability in direct sunlight and a resistive touchscreen via USB. The monitor has deep dimming, VGA/DVI inputs. It is designed to fit a single DIN-E radio slot.
the expert approach
6.5” In Car Display LCD Head Monitor ICD-610
Features •
A resitive touch screen has been integrated via USB
•
Inputs: VGA (HD-15), DVI-D
•
Adjustable depth of head unit
•
Rugged metal construction with good stability. The LCD monitor has been designed with solidity, being housed in a compact metal construction with a toughened glass touch screen.
Specifications: see next page
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS Specifications
TFT Charateristics
Type Max. Resolution Active Display Area Response Time Contrast Ratio Brightness Viewing angles (at CR>10) Backlight life Nr. of colours
Video Signal
Analog 0.7Vp-p
Signal Sync
Separate H&V (+/-ve) TTL
Sync-on-Green -0.3Vp-p
Synchronisation Range
Horizontal scan Vertical scan
30 to 80kHz 50 to 65Hz
Display modes
VESA Support
640 x 480 VGA 800 X 600 SVGA 1024 x 768 XGA (recommended)
Power supply
12VDC
Power consumption
15W (Max)
Environmental
Storage Temp Operating Temp
-30 to 80°C -10 to 70°C
Dimensions
Monitor Weight
185 x 123 x 27mm TBC
Input
VGA (HD-15), DVI-D
Housing
Painted aluminium
User controls
Rear mounted
Side Controls
Side power switch, deep dimming
Touch screen
Resistive touchscreen via USB interface
Other Features:
Transflective LCD panel
Part numbers
Model
ICD-610
Specifications are subject to change without notice.
a-si TFT active matrix 1024 x 768 pixels 132.1 x 99.1 mm 25ms average, typical 500:1 typical 650 cd/m2 typical 80˚ R / 80˚ L / 80˚ Up / 60˚ down 50,000 hrs typical 16,7 million
the expert approach •M onitors Desktop Monitors Large screen Monitors Custom-made Monitors 19” Rack Mount Monitors Rear Mount Monitors Monitors for Panel Mount Monitors for VESA Mount Kiosks Accessories •M onitors – Specific applications Stainless Steel Monitors Car Displays Marine Monitors Military Monitors Replacement Monitors Train Monitors •P anel PC’s High Performance Systems Custom made Panel PC’s Low Power Systems Extreme environments •P ointing devices Accessories Touchpads Trackballs Trackball Modules Joysticks Custom made Pointing Devices •K eyboards Desktop Keyboards with or without pointer Built-in Keyboards with or without pointer Cables & Connectors Custom made Keyboards
Mulder-Hardenberg, est. 1927, is the answer to professional demands in the domain of electronic related environments. We don’t just sell products. We use our multidiscipline knowledge to provide the best possible solution, designed to your specific interest. Contactdetails: The Netherlands Mulder-Hardenberg B.V. Westerhoutpark 1a 2012 JL Haarlem Tel.: +31 23 531 91 84
[email protected] Belgium, France, Luxemburg Mulder-Hardenberg N.V. Hoge Weg 129 B-2940 Stabroek Belgium Tel.: +32 3 660 13 20
[email protected] Germany Mulder-Hardenberg GmbH Nordring 13 D-65719 Hofheim/Ts Tel.: +49 6192 - 97 91 85
[email protected]
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS High Quality, LCD Monitor Head KME has developed this display module for use in vehicles where an economically priced SVGA TFT flat panel monitor is required with a bright screen and wide viewing angles.
the expert approach
8.4” In Car Display LCD Head Monitor ICD-810
The ICD-810 series is supplied with HelioviewTM transflective technology to improve view-ability in direct sunlight and a resistive touchscreen via USB. The monitor has deep dimming, VGA/DVI. It is designed to fit a single DIN-E radio slot.
Features •
A resitive touch screen has been integrated via USB
•
Inputs: VGA (HD-15), DVI-D
•
Adjustable depth of head unit
•
Rugged metal construction with good stability. The LCD monitor has been designed with solidity, being housed in a compact metal construction with a toughened glass touch screen
Specifications: see next page
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS Specifications
TFT Charateristics
Type Max. Resolution Active Display Area Response Time Contrast Ratio Brightness Viewing angles (at CR>10) Backlight life Nr. of colours
Video Signal
Analog 0.7Vp-p
Signal Sync
Separate H&V (+/-ve) TTL
Sync-on-Green -0.3Vp-p
Synchronisation Range
Horizontal scan Vertical scan
30 to 80kHz 50 to 65Hz
Display modes
VESA Support
640 x 480 VGA 800 X 600 SVGA (recommended)
Power supply
12VDC
Power consumption
15W (Max)
Environmental
Storage Temp Operating Temp
-20 to 80°C -10 to 70°C
Dimensions
Monitor Weight
223.5 x 160 x 32.4mm TBC
Input
VGA (HD-15), DVI-D
Housing
Painted aluminium
User controls
Rear mounted
Side Controls
Side power switch, deep dimming
Touch screen
Resistive touchscreen via USB interface
Other Features:
Transflective LCD panel
Part numbers
Model
ICD-810
Specifications are subject to change without notice.
a-si TFT active matrix 800 x 600 pixels 170.4 x 127.8 mm 25ms average, typical 600:1 typical 600 cd/m2 typical 80˚ R / 80˚ L / 80˚ Up / 60˚ down 50,000 hrs typical 16,7 million
the expert approach •M onitors Desktop Monitors Large screen Monitors Custom-made Monitors 19” Rack Mount Monitors Rear Mount Monitors Monitors for Panel Mount Monitors for VESA Mount Kiosks Accessories •M onitors – Specific applications Stainless Steel Monitors Car Displays Marine Monitors Military Monitors Replacement Monitors Train Monitors •P anel PC’s High Performance Systems Custom made Panel PC’s Low Power Systems Extreme environments •P ointing devices Accessories Touchpads Trackballs Trackball Modules Joysticks Custom made Pointing Devices •K eyboards Desktop Keyboards with or without pointer Built-in Keyboards with or without pointer Cables & Connectors Custom made Keyboards
Mulder-Hardenberg, est. 1927, is the answer to professional demands in the domain of electronic related environments. We don’t just sell products. We use our multidiscipline knowledge to provide the best possible solution, designed to your specific interest. Contactdetails: The Netherlands Mulder-Hardenberg B.V. Westerhoutpark 1a 2012 JL Haarlem Tel.: +31 23 531 91 84
[email protected] Belgium, France, Luxemburg Mulder-Hardenberg N.V. Hoge Weg 129 B-2940 Stabroek Belgium Tel.: +32 3 660 13 20
[email protected] Germany Mulder-Hardenberg GmbH Nordring 13 D-65719 Hofheim/Ts Tel.: +49 6192 - 97 91 85
[email protected]
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS MDT (Mobile Data Terminal) Sunlight Readable In-Car LCD Touchscreen Head Display KME has developed this display module for use in vehicles, where a high quality rugged touch screen display is required to interface with a PC or Laptop. Specifically tailored for use in direct sunlight and night time conditions, this display offers great performance and versatility in both extremes.
the expert approach
8.4” In Car Touchscreen LCD Head Mount Display ICD-812
The ICD-812 has provisions for multiple attachments like switch panels and card readers. One of the key properties of the design is that it is both backwards and forwards compatible with old and new vehicles making the application of this display suitable for retrofit and new builds.
Features •
Our resistive touch screen and TFT utilize Anti-Reflective enhancements and polarizing filters to produce a high quality solution for in vehicles in direct sunlight.
•
Deep Dimming - Our solution provides an analogue control of the back light brightness from 0-100% via a POT on the front face. This enables the user to quickly and easily control the brightness level of the display for a variety of ambient light conditions.
•
VGA (HD-15) This particular version has a native resolution of SVGA (800x600). The unit has fly-leads on the rear face for connecting to PC’s or laptop docks.
•
The ICD-812 is fully approved and tested to SPEC 5 by the NPIA. The unit is CE marked, (certificates available on request). Each display comes with the mating half locking power connector. There are also a range of universal brackets and vehicle-specific kits to mount the displays.
Specifications: see next page
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS Specifications
TFT Charateristics
Type Max. Resolution Active Display Area Response Time Contrast Ratio Brightness Viewing angles (at CR>10) Backlight life
a-si TFT active matrix 800 x 600 pixels 170.4 x 127.8 mm 30ms average, typical 600:1 typical 850 cd/m2 typical 80˚ R / 80˚ L / 80˚ Up / 60˚ down 50,000 hrs (based on time till backlight brightness is reduced by half)
Nr. of colours
•M onitors Desktop Monitors Large screen Monitors Custom-made Monitors 19” Rack Mount Monitors Rear Mount Monitors Monitors for Panel Mount Monitors for VESA Mount Kiosks Accessories
16,7 million
Video Signal
Analog 0.7Vp-p
Signal Sync
Separate H&V (+/-ve) TTL
Sync-on-Green -0.3Vp-p
Synchronisation Range
Horizontal scan Vertical scan
30 to 80kHz 50 to 65Hz
Display modes
VESA Support
800 x 600 VGA 1024 X 768 SVGA (recommended)
Power supply
12VDC (9V-15V approx)
Power consumption
15W (Max)
Environmental
Storage Temp Operating Temp
-20 to 80°C -10 to 60°C
Dimensions
Monitor Weight
220.9 x 157.0 x 36.5mm 2kg (approx)
Input
VGA (HD-15), DVI-D
Housing
Painted aluminium
User controls
Rear mounted OSD
Front Controls
Rotary power switch with full Deep dimming 0-100%
Touch screen
Resistive Polarized Anti-Reflective filtered touchscreen via USB
Part numbers
Model
the expert approach
ICD-812 ICD-822 (extra input -composite video, PAL/NTSC. includes a source select switch on front face
•M onitors – Specific applications Stainless Steel Monitors Car Displays Marine Monitors Military Monitors Replacement Monitors Train Monitors •P anel PC’s High Performance Systems Custom made Panel PC’s Low Power Systems Extreme environments •P ointing devices Accessories Touchpads Trackballs Trackball Modules Joysticks Custom made Pointing Devices •K eyboards Desktop Keyboards with or without pointer Built-in Keyboards with or without pointer Cables & Connectors Custom made Keyboards
Specifications are subject to change without notice.
Mulder-Hardenberg, est. 1927, is the answer to professional demands in the domain of electronic related environments. We don’t just sell products. We use our multidiscipline knowledge to provide the best possible solution, designed to your specific interest. Contactdetails: The Netherlands Mulder-Hardenberg B.V. Westerhoutpark 1a 2012 JL Haarlem Tel.: +31 23 531 91 84
[email protected] Belgium, France, Luxemburg Mulder-Hardenberg N.V. Hoge Weg 129 B-2940 Stabroek Belgium Tel.: +32 3 660 13 20
[email protected] Germany Mulder-Hardenberg GmbH Nordring 13 D-65719 Hofheim/Ts Tel.: +49 6192 - 97 91 85
[email protected]
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS All-In-One: LCD Touchscreen Computer The ICD-850 is an rugged all-in-one MDT solution for in-car use. It consists of a high bright LCD monitor, a compact Single Board Computer, a SSD [Hard Drive] and a touchscreen. The unit also has an integrated 3G modem for internet connectivity and a GPS receiver for satellite navigation.
the expert approach
8.4” Rugged LCD In Car Touchscreen PC MDT (Mobile Data terminal) ICD850
This unit is design to fit into a standard radio single DIN slot, and can be fitted with ease. The LCD also has a deep dimming backlight control, which enables the user to dim the screen from 100% to 0% brightness.
Features •
Touch screen facility
•
Integrated Hardware: - 3G Internet connectivity - GPS receiver - Microphone / Speaker - Smart Card Reader - Video camera in cab
•
Inputs: USB, Ethernet, Serial RS232
•
Adjustable depth of head unit - This enables the unit to be adjusted to suit any vehicle with a single DIN-E radio slot
•
Rugged metal construction - The ICD-850 has been designed to withstand the harsh shock and vibration levels experienced by a police vehicle.
•
High speed SBC (Single Board Computer) - The high speed/ low power SBC in the ICD-850 makes this ideal for use in vehicles
•
High speed SSD SATA (Hard Drive) - The ICD-850 as standard has a 64GB Solid State SATA Hard Drive integrated which enables fast read /write speeds with high capacity, yet robust and durable for use in a high-shock environment
•
Intelligent Power Management System - The ICD-850 has a power management system which enables the screen to be operated while the vehicle is in use, but will power down the PC when the car has not been occupied for a period of time. This system means the PC is shut down correctly and prevents damage to the key operating system files. It therefore does not drain the vehicle’s battery when the car is not in use. The system will also know when the vehicle has been re-occupied and will start up automatically. Specifications: see next page
www.mh-hminterfaces.com
HUMAN/MACHINE INTERFACES & MONITORS Specifications
TFT Charateristics
Type Max. Resolution Active Display Area Response Time Contrast Ratio Brightness Viewing angles (at CR>10) Backlight life Nr. of colours
a-si TFT active matrix 800 x 600 pixels (SVGA) 170.4 x 127.8 mm 30ms average, typical 600:1 typical 1000 cd/m2 typical 80˚ R / 80˚ L / 80˚ Up / 60˚ down 50,000 hrs typical 16,7 million
PC Specifications
Processor / Memory
1.6GHz Intel Atom SBC / 2GB RAM
Storage
(SSD) 64GB SATA Drive (removable)
Power supply / cons
12VDC / 15W (Max)
Environmental
Storage Temp Operating Temp
-20 to 80°C -10 to 55°C
Dimensions
Monitor Weight
240.5 x 163.5 x 36.0mm 3.5kg
Housing
Painted aluminium
Side Controls
Power reset switch, Deep dimming control
Touch screen
Resistive touchscreen
the expert approach •M onitors Desktop Monitors Large screen Monitors Custom-made Monitors 19” Rack Mount Monitors Rear Mount Monitors Monitors for Panel Mount Monitors for VESA Mount Kiosks Accessories •M onitors – Specific applications Stainless Steel Monitors Car Displays Marine Monitors Military Monitors Replacement Monitors Train Monitors
Other
Integrated Hardware
3G Internet
3G integrated, with SIM slot & Aerial on board
GPS
GPS reciever module & antenna
Peripherals (Keyboard)
USB interface on rear (keyboard not included). Smart Card Reader (User Log-In Access) Built in Microphone and Speaker. Video Camera (Facing car interior)
Interface Connectors
x1 Ethernet (RJ45) 4x USB (x2 rear face, x2 front face) x1 Power Connector
Serial RS232 (9way-D) x1 VGA out (15way-D) x1 3G Aerial (Rear Face) SMA Connector (Extra Aerial Port)
Part numbers
Model
ICD-850
Options
Speed enforcement Video Input (with source select switch) Upgraded Hard Drive (128GB)
•P anel PC’s High Performance Systems Custom made Panel PC’s Low Power Systems Extreme environments •P ointing devices Accessories Touchpads Trackballs Trackball Modules Joysticks Custom made Pointing Devices •K eyboards Desktop Keyboards with or without pointer Built-in Keyboards with or without pointer Cables & Connectors Custom made Keyboards
Specifications are subject to change without notice.
Mulder-Hardenberg, est. 1927, is the answer to professional demands in the domain of electronic related environments. We don’t just sell products. We use our multidiscipline knowledge to provide the best possible solution, designed to your specific interest. Contactdetails: The Netherlands Mulder-Hardenberg B.V. Westerhoutpark 1a 2012 JL Haarlem Tel.: +31 23 531 91 84
[email protected] (not standard)
Belgium, France, Luxemburg Mulder-Hardenberg N.V. Hoge Weg 129 B-2940 Stabroek Belgium Tel.: +32 3 660 13 20
[email protected] Germany Mulder-Hardenberg GmbH Nordring 13 D-65719 Hofheim/Ts Tel.: +49 6192 - 97 91 85
[email protected]
www.mh-hminterfaces.com
