Transcript
IN-COAX2IPOE PoE EoC Solution 10/100Mbps 300m • Use with coaxial cable to transmit power and data • Conforms to IEEE802.3i 10Base-T and IEEE802. 3 low control • LED indicator to display the current status • Plug and play, no configuration required • Used in pairs
Specifications IN-COAX2IPOE is the high-performance Ethernet over coaxial cable that converts between twisted pair cable (UTP) and coaxial cable for every kind of IP (PoE) Ethernet application. It offers the absolutely fastest data transmission speed over existing coaxial cable without the need for rewiring. In regards to UTP, the IN-COAX2IPOE uses the standard RJ-45 connector and existing coaxial cable to transmit IP (PoE) signal to 200-300 meters. It is ideal for extending the distance and for signal conversion by transmitting the Ethernet data from the coaxial cable for any type of IP network device: such as an IP camera, a wireless access point, an NVR and a digital signal. It also can use PoE from the existing coaxial cable and network cable thus being very cost efficient.
Application Diagram
Cat.5 BNC cable with PoE
www.inaxsys.com Tel: 514.648.6648 • Fax: 514.667.0745 •
[email protected]
IN-COAX2IPOE
Product Specifications
Standard
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af
Connector
1xRJ-45, 1xBNC
Cabling
Coaxial cable
Data Rate
10/100Mpbs
Distance
200-300m (with PoE)
Performance Specification Network Latency
Store-and-forward Less than 20µs for 64-byte frames in store-and-forward mode for 10Mbps to 100Mbps transmission
Power Power Consumption Temperature Humidity Dimension
DC48V <3W - 10 to 50°C (Operating) - 20 to 70°C (Storage) 10 to 90% non-condensing 118x85x29mm
Weight
0.45kg
Safety
CE/RoHs/FCC
* All specifications are subject to change without notice. * All brand names and registered trademarks are the property of their respective owners.
