Transcript
00000_PowerNow7800_UserGuide_3-15_Layout 1 3/16/15 5:44 PM Page 1
Included in the Package: • PowerNow! 7800™ 7800mAh Portable Power Pack • USB Wall Charger • USB to Micro-USB/Apple® 30-pin/Apple 8-pin Charging Cable • Carry Pouch • User Guide
Specifications:: • Capacity: 7800mAh • Battery Type: Lithium-ion • Input: 5.0V/1.0A • Dual USB Output: 5.0V/1.0A and 5.0V/2.1A • LED Flashlight • Working Environment: -68° to 113°F (-20° to 45°C), Maximum 85% Humidity
This warranty does not extend to any product not purchased from PC Treasures, LLC, or an authorized PC Treasures, LLC reseller. This warranty does not extend to product that has been damaged or rendered defective as a result of use for which the product is not intended, is contrary to instructions provided in the user guide, as a result of the use of parts not manufactured or sold by PC Treasures, LLC, or due to any misuse, abuse, negligence, modification, or improper packing when returning product to PC Treasures, LLC. EXCEPT FOR THE WARRANTY SET FORTH HEREIN, PC TREASURES, LLC DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY APPLICABLE LAW ARE LIMITED TO THE TERM OF THIS WARRANTY. IN NO EVENT SHALL PC TREASURES, LLC BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF BUSINESS, PROFITS, DATA OR USE, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT. YOU AGREE THAT REPAIR, AND (UPON AVAILABILITY) REPLACEMENT, AS APPLICABLE, UNDER THE WARRANTY SERVICES DESCRIBED HEREIN IS YOUR SOLE AND EXCLUSIVE REMEDY WITH RESPECT TO ANY BREACH OF THE PC TREASURES, LLC LIMITED WARRANTY SET FORTH HEREIN. How Do I Obtain Warranty Service? If you require warranty service, please send an email to
[email protected] or contact PC Treasures, LLC directly at (248) 236-0061 to report a claim, at which time PC Treasures, LLC technicians will attempt to solve any issues. If they are unable to resolve your issue, you will be issued an RMA to authorize the return of the item for repair/replacement. All charges incurred while returning product, including postage, duties, export taxes, and customs duties, are the responsibility of purchaser, and purchaser assumes all risk of loss during shipment.
At A Glance:
LED Flashlight
One (1) Year Limited Warranty PC Treasures, LLC warrants this product to be free from defects in materials and workmanship. This warranty covers the original purchaser only, and is not transferable to anyone who subsequently buys, leases, or otherwise obtains this product from you. Your One Year Limited Warranty begins on the date of purchase. Your original purchase invoice or sales receipt, showing date of purchase, is your proof of warranty period. The duration of this warranty does not extend beyond the initial period of coverage should any repairs or replacements be made or performed.
Battery Status LEDs
Models Covered Under This Warranty: 09926, 09927, 09928, 09929, 09930, 09931
2.1 Amp USB Power Output Port 1.0 Amp USB Power Output Port
Micro USB Power Input Port On/Off Button
Digital Treasures is a Division of PC Treasures, LLC 3720 Lapeer Rd., Auburn Hills, MI 48326 • Phone: (248) 236-0061 www.digitaltreasures.com Made in China Digital Treasures, the Digital Treasures logo, PC Treasures, PowerNow! 7800, and the PowerNow! 7800 logo are trademarks or registered trademarks of PC Treasures, LLC. © 2015 PC Treasures, LLC. All rights reserved. PN7800_MAN_3-15
00000_PowerNow7800_UserGuide_3-15_Layout 1 3/16/15 5:44 PM Page 2
BEFORE FIRST USE
Charging a Tablet
Your PowerNow! 7800 comes from the factory with a charge and can be used right out of the box. However, it is best to make sure that the unit is fully charged before first use. Press the Power Button to see how much charge is in the unit. The Battery Status LEDs light up to show the charge level. The Battery Status LEDs will turn off after a few seconds.
To charge a tablet with the PowerNow! 7800, plug the device into the 2.1 Amp USB Power Output Port and press the On/Off Button. The Battery Status LEDs light up, showing the percent of power remaining in the PowerNow! 7800. When the device is fully charged, the Battery Status LEDs turn off. You may charge a tablet and a smartphone (or similar device) at the same time, as long as the tablet is plugged into the 2.1 Amp USB Power Output Port.
• One LED Lit: 25% Charged
• Two LEDs Lit: 50% Charged
• Three LEDs Lit: 75% Charged • Four LEDs Lit: 100% Charged Battery Status LEDs Showing 100% Charge Level
IMPORTANT: If you plug the tablet into the 1.0 Amp USB Power Output Port, it MAY NOT CHARGE. The 1.0 Amp USB Power Output Port does not provide strong enough power output to charge most tablets.
A Tablet Will Not Charge - Check to make sure that the tablet is securely connected to the 2.1 Amp USB Power Output Port. The 1.0 Amp USB Power Output Port does not have a strong enough power output to charge most tablets. If another device is plugged into the 1.0 Amp USB Power Output Port while the tablet is plugged into the 2.1 Amp USB Power Output Port, unplug it. One of the devices may be drawing too much power for two devices to be charged at the same time. Make sure that the PowerNow! 7800 is charged. Recharge the PowerNow! 7800 if necessary. If the tablet still will not charge, your power cable may be damaged. Connect the tablet using a different power cable.
CAUTION: Store the PowerNow! 7800 in a cool, dry place. Avoid water and corrosive chemicals. Do not violently shake or strike. Device contains no user-serviceable parts. Do not disassemble. If the device is overheating or smoking or if the case is damaged, deformed, or discolored, immediately discontinue use.
How to Properly Dispose of Batteries This product contains lithium-ion batteries. To properly dispose of expired batteries, view your city’s website or newsletter to find what guidelines, if any, should be followed and to make note of their hazardous waste collection days. Micro USB Power Input Port
Charging the PowerNow! 7800
™
To charge the PowerNow! 7800, insert the Micro USB end of the included USB to Micro-USB/Apple® 30-pin/Apple 8-pin Charging Cable into the power bank’s Micro-USB Power Input Port and the other end into a USB Port on your computer or the included USB wall adapter. The Battery Status LEDs light up to indicate the current power level. All four lights glow steadily when the unit is fully charged.
Charging a Smartphone, Camera, or Other Device To charge a smartphone or similar device with the PowerNow! 7800, plug the device into either of the USB Power Output Ports and press the On/Off Button. The Battery Status LEDs light up, showing the percent of power remaining in the PowerNow! 7800. When the device is fully charged, the Battery Status LEDs turn off. You may charge two smartphones (or similar devices) at one time by plugging one into each USB Power Output Port.
On/Off Button
2.1 Amp USB 1.0 Amp USB Power Output Port Power Output Port
Using the LED Flashlight To activate the LED Flashlight, press the On/Off Button two times. Press the On/Off Button two more times to turn the LED Flashlight off.
Troubleshooting The PowerNow! 7800 Will Not Charge - Check to make sure that the USB to Micro-USB/Apple® 30-pin/Apple 8-pin Charging Cable is properly connected to the Micro USB Power Input Port. If the unit still will not charge, your power cable may be damaged. Connect the unit using a different power cable. A Smartphone Will Not Charge - Check to make sure that the smartphone is securely connected and the PowerNow! 7800 is charged. Recharge the PowerNow! 7800 if necessary. If the smartphone still will not charge, your power cable may be damaged. Connect the smartphone using a different power cable.
Technical Support Email:
[email protected] Phone: (248) 236-0061, Mon.-Fri., 9:30am-5:30pm FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna b) Increase the separation between the equipment and receiver c) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected d) Consult the dealer or an experienced radio/TV technician for help. Note 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
