Transcript
100 Watt Power Inverter Model: SLX-100-BUI PLUG YOUR INVERTER INTO THE LIGHTER SOCKET IN YOUR VEHICLE TO CONNECT. THEN PLUG YOUR DEVICE INTO THE INVERTER FOR POWER.
Input Output safety
-- Light weight, compact, highly portable -- Easy to install and operate -- 2.1 Amp USB Charging Port (compatible with all new release smart phones) -- Load controlled cooling fan -- Cool surface technology -- Soft start technology -- Low battery input alarm -- Universal protection circuit – thermal, battery, overload, short circuit & earth fault -- Safety certified to UL standards -- 2 Year Warranty
PROTECTIONS
Design Features
outlets
Keep your battery operated power tools charged and ready with the Samlex Builder power inverter. Connect the inverter through your vehicle and plug in everything from smart phones and laptops to skill saws and power washers. Working in a remote location? Power your work bench on the job-site, charge two-way radios and be ready in an emergency.
Battery System Voltage
General
Household power from a 12V Battery
SPECIFICATIONS 12 VDC
Nominal Input Voltage
13.8 VDC
Input Voltage Range
10.8 VDC to 15.4 VDC
NO LOAD CURRENT
0.3A ± 0.1A
Output Voltage Wave Form
Modified Sine Wave
Output Voltage (Frequency)
115VAC + 10% / -2%; 60 Hz ± 5%
Output Power, Continuous (Resistive Load)
100W
Output Power, Surge (<1 Sec., Resistive Load)
200W
Peak Efficiency (at 50% of Continuous Power)
90%
USB Charging Port
Connector Type “A”: 5 VDC, 2.1A
Low Input Voltage ShutdowN
10.5 VDC ± 0.3 VDC. Auto reset at 11.5 VDC ± 0.3VDC
High Input Voltage Shutdown
15.4 VDC ± 0.2 VDC. Auto reset at 15.0 VDC ± 0.2VDC
Overload and GROUND FAULT SHUT DOWN
Yes. Latches in shutdown condition. Manual reset: Remove the inverter from the 12V Power Outlet. Wait for 3 min and re-insert firmly.
Over Temperature Shutdown
Yes. Auto reset on cooling down.
cooling FAN
Always ON
Input Fuse: Inside top of the 12V Power plug portion
10A, 250V (Fast Acting, Type AGC-10; Dimensions: 0.25” x 1.25”)
DC Input
12V Power Plug (Cigar Plug)
AC Output
One NEMA5-15R Outlet
MONITORING: STATUS INDICATION
GREEN LED: ON - Normal; OFF - Shut Down
Operating Temperature Range
0°C to 25°C / 32°F to 77°F at 100% loading; 26°C to 35°C / 78.8°F to 95°F at 80% loading
Operating Humidity
< 80%; Non-condensing
Dimensions (W x D x H)
60 x 129 x 36.5 mm 2.36 x 5.08 x 1.44 in
Weight
0.136 kg / 0.3 lb
Safety Compliance
Conforms to UL STD 458
NOTE: Specifications are subject to change without notice
pluginyourstuff.com
12002-SLX-100-BUI-0515
TM
250 Watt Power Inverter Model: SLX-250-BUI PLUG YOUR INVERTER INTO THE LIGHTER SOCKET OR CLAMP ON TO YOUR VEHICLE BATTERY TO CONNECT. THEN PLUG YOUR DEVICE INTO THE INVERTER FOR POWER.
Input
Keep your battery operated power tools charged and ready with the Samlex Builder power inverter. Connect the inverter through your vehicle and plug in everything from smart phones and laptops to skill saws and power washers. Working in a remote location? Power your work bench on the job-site, charge two-way radios and be ready in an emergency.
Battery System Voltage
Output
Household power from a 12V Battery
SPECIFICATIONS
outlets safety
General
-- Light weight, compact, highly portable -- Easy to install and operate -- 2.1 Amp USB Port (compatible with all new release smart phones) -- Load controlled cooling fan -- Cool surface technology -- Soft start technology -- Low battery input alarm -- Universal protection circuit – thermal, battery, overload, short circuit & earth fault -- Safety certified to UL standards -- 2 Year Warranty
Protections
Design Features
12 VDC
Nominal Input Voltage
12.5 VDC
Input Voltage Range
> 10.8 VDC to < 15.4 VDC
Input Current at Continuous Power
22.3A to 24.2A
Input Current at No Load
0.2A to 0.3A
Output Voltage Wave Form
Modified Sine Wave
Output Voltage (Frequency)
115VAC + 10% / -2%; 60 Hz ± 5%
Output Power, Continuous (Resistive Load)
250W
Output Power, Surge (<1 Sec., Resistive Load)
500W
Peak Efficiency (at 50% of Continuous Power)
90%
USB Charging Port
USB 3.0, Connector Type “A”: 5 VDC, 2.1A
Low Input Voltage Alarm
10.8 VDC ± 0.3 VDC
Low Input Voltage ShutdowN
10.5 VDC ± 0.3 VDC
High Input Voltage Shutdown
15.4 VDC ± 0.2 VDC
Overload and GROUND FAULT SHUT DOWN
Yes. Latches in shutdown condition. Manual reset: Switch OFF the ON/OFF Switch, wait 3 mins & Switch ON again.
Over Temperature Shutdown
Yes. Auto reset on cooling down.
cooling FAN
Load controlled: Switches ON at 8W to 12W
Input Fuse: 32V, Automotive Type ATC (inside the unit, not user accessible)
30A
DC Input
M4 Thumb Screw
AC Output
One NEMA5-15R Outlet
Operating Temperature Range
0°C to 25°C / 32°F to 77°F at 100% loading; 26°C to 35°C / 78.8°F to 95°F at 80% loading
Operating Humidity
< 80%; Non-condensing
NEUTRAL TO CHASSIS BONDING
No. Neutral of the NEMA5-15R AC Outlet is isolated from the chassis
Dimensions (W x D x H)
114.4 x 150 x 46 mm 4.5 x 5.9 x 1.8 in
Weight
0.42 kg / 0.92 lb
DC INPUT CABLES INCLUDED
AWG#16 Cable with 12V power plug (12V plug contains replaceable 250V, 8A fuse - Bussmann Type AGC-8); AWG#14 Cable with battery clamps
Safety Compliance
Conforms to UL STD 458
NOTE: Specifications are subject to change without notice
pluginyourstuff.com
12002-SLX-250-BUI-1113
TM
450 Watt Power Inverter Model: SLX-450-BUI PLUG YOUR INVERTER INTO THE LIGHTER SOCKET OR CLAMP ON TO YOUR VEHICLE BATTERY TO CONNECT. THEN PLUG YOUR DEVICE INTO THE INVERTER FOR POWER.
Input
Keep your battery operated power tools charged and ready with the Samlex Builder power inverter. Connect the inverter through your vehicle and plug in everything from smart phones and laptops to skill saws and power washers. Working in a remote location? Power your work bench on the job-site, charge two-way radios and be ready in an emergency.
Battery System Voltage
Output
Household power from a 12V Battery
SPECIFICATIONS
outlets General
-- Light weight, compact, highly portable -- Easy to install and operate -- 2.1 Amp USB Port (compatible with all new release smart phones) -- Load controlled cooling fan -- Cool surface technology -- Soft start technology -- Low battery input alarm -- Universal protection circuit – thermal, battery, overload, short circuit & earth fault -- Safety certified to UL standards -- 2 Year Warranty
Protections
Design Features
Nominal Input Voltage
12.5 VDC
Input Voltage Range
> 10.8 VDC to < 15.4 VDC
Input Current at Continuous Power
41.3A to 43.3A
Input Current at No Load
0.25A to 0.35A
Output Voltage Wave Form
Modified Sine Wave
Output Voltage (Frequency)
115VAC + 10% / -2%; 60 Hz ± 5%
Output Power, Continuous (Resistive Load)
450W
Output Power, Surge (<1 Sec., Resistive Load)
900W
Peak Efficiency (at 50% of Continuous Power)
90%
USB Charging Port
USB 3.0, Connector Type “A”: 5 VDC, 2.1A
Low Input Voltage Alarm
10.8 VDC ± 0.3 VDC
Low Input Voltage ShutdowN
10.5 VDC ± 0.3 VDC
High Input Voltage Shutdown
15.4 VDC ± 0.2 VDC
Overload and GROUND FAULT SHUT DOWN
Yes. Latches in shutdown condition. Manual reset: Switch OFF the ON/OFF Switch, wait 3 mins & Switch ON again.
Over Temperature Shutdown
Yes. Auto reset on cooling down.
cooling FAN
Load controlled: Switches ON at 8W to 12W
Input Fuse: 32V, Automotive Type ATC (inside the unit, not user accessible)
70A (2 x 35A in parallel)
DC Input
M4 Thumb Screw
AC Output
Two NEMA5-15R Outlets
Operating Temperature Range
0°C to 25°C / 32°F to 77°F at 100% loading; 26°C to 35°C / 78.8°F to 95°F at 80% loading
Operating Humidity
< 80%; Non-condensing
NEUTRAL TO CHASSIS BONDING
No. Neutral of the NEMA5-15R AC Outlet is isolated from the chassis
Dimensions (W x D x H)
154 x 151 x 56.5 mm 6.1 x 6.0 x 2.2 in
Weight
0.6 kg / 1.3 lb
DC INPUT CABLES INCLUDED
AWG#16 Cable with 12V power plug (12V plug contains replaceable 250V, 8A fuse - Bussmann Type AGC-8); AWG#12 Cable with battery clamps
Safety Compliance
Conforms to UL STD 458
OUTPUT: 115V AC
safety
ON
5VDC 500mh
12 VDC
NOTE: Specifications are subject to change without notice
pluginyourstuff.com
12002-SLX-450-BUI-1113
800 Watt Power Inverter Model: SLX-800-BUI USE THE CABLES PROVIDED TO CLAMP THE INVERTER TO YOUR VEHICLE BATTERY TO CONNECT. THEN PLUG YOUR DEVICE INTO THE INVERTER FOR POWER.
Input
Keep your battery operated power tools charged and ready with the Samlex Builder power inverter. Connect the inverter through your vehicle and plug in everything from smart phones and laptops to skill saws and power washers. Working in a remote location? Power your work bench on the job-site, charge two-way radios and be ready in an emergency.
Battery System Voltage
Output
Household power from a 12V Battery
SPECIFICATIONS
outlets safety
General
-- Light weight, compact, highly portable -- Easy to install and operate -- 2.1 Amp USB Port (compatible with all new release smart phones) -- Load controlled cooling fan -- Cool surface technology -- Soft start technology -- Low battery input alarm -- Universal protection circuit – thermal, battery, overload, short circuit & earth fault -- Safety certified to UL standards -- 2 Year Warranty
Protections
Design Features
12 VDC
Nominal Input Voltage
12.5 VDC
Input Voltage Range
> 10.8 VDC to < 15.4 VDC
Input Current at Continuous Power
72A to 75A
Input Current at No Load
0.25A to 0.35A
Output Voltage Wave Form
Modified Sine Wave
Output Voltage (Frequency)
115VAC + 10% / -2%; 60 Hz ± 5%
Output Power, Continuous (Resistive Load)
800W
Output Power, Surge (<1 Sec., Resistive Load)
1600W
Peak Efficiency (at 50% of Continuous Power)
90%
USB Charging Port
USB 3.0, Connector Type “A”: 5 VDC, 2.1A
Low Input Voltage Alarm
10.8 VDC ± 0.3 VDC
Low Input Voltage ShutdowN
10.5 VDC ± 0.3 VDC
High Input Voltage Shutdown
15.4 VDC ± 0.2 VDC
Overload and GROUND FAULT SHUT DOWN
Yes. Latches in shutdown condition. Manual reset: Switch OFF the ON/OFF switch, wait 3 mins and Switch ON again.
Over Temperature Shutdown
Yes. Auto reset on cooling down.
cooling FAN
Load controlled: Switches ON at 35W to 45W
Input Fuse: 32V, Automotive Type ATC (inside the unit, not user accessible)
105A (3 x 35A in parallel)
DC Input
M4 Thumb Screw
AC Output
Two NEMA5-15R Outlets
Operating Temperature Range
0°C to 25°C / 32°F to 77°F at 100% loading; 26°C to 35°C / 78.8°F to 95°F at 80% loading
Operating Humidity
< 80%; Non-condensing
NEUTRAL TO CHASSIS BONDING
No. Neutral of the NEMA5-15R AC Outlet is isolated from the chassis
Dimensions (W x D x H)
180 x 218 x 59 mm 7.0 x 8.6 x 2.4 in
Weight
1.32 kg / 2.91 lb
DC INPUT CABLES INCLUDED
AWG#8 Cable with battery clamps
Safety Compliance
Conforms to UL STD 458
NOTE: Specifications are subject to change without notice
pluginyourstuff.com
12002-SLX-800-BUI-0515
